Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Chronotypes-Personality behavioural syndromes in wild marine fish [dataset]

  • Martorell Barceló, Martina
  • Signaroli, Marco
  • Barceló-Serra, Margarida
  • Lana, Arancha
  • Aspillaga, Eneko
  • Garau, Amalia
  • Arlinghaus, Robert
  • Alós, Josep
[Description of methods used for collection/generation of data] The data derived from the laboratory were obtained through various standardised tests, and recorded to gather behavioural data. For exploration and activity, positional data were acquired via a deep-learning object detection algorithm /YOLOv5). In the case of boldness and aggression, data were obtained by subsequently reviewing the videos. Regarding chronotypes, data were obtained from an acoustic telemetry experiment, but here we present only the scores obtained in a previous study., This dataset encompasses all necessary data required to replicate the study, `Chronotypes-Personality behavioural syndromes in wild fish’. The data were obtained through standardised behavioural tests conducted under laboratory conditions on 63 Pearly Razorfish (Xyrichtys novacula) individuals between April and July of 2019. Over a week, the fish were maintained in isolated aquariums to test their behaviours, including exploration, activity, boldness, and aggression, conducted daily. A Raspberry Pi system, equipped with the YOLOv5 deep-learning automatic tracking algorithm, was used to record these tests and calculate the fish's minute-by-minute position, providing essential data for evaluating exploration and activity. This system also stored videos to retrospectively obtain boldness and aggression data. Each test included only those individuals with at least two measurements. After the laboratory period, the fish were tagged with acoustic tags and returned to the sea to measure their chronotypes; only individuals with at least seven consecutive days of data were considered. The chronotype data, obtained from a previous study, are represented here through the previously derived scores. These laboratory-based experimental data were analysed using R software. In the exploration context, positional data were translated into total active time (TimeOut), minimum distance to the toy (MinDistance), and time spent near the toy (TimeToy). For activity, the data were converted into total active time (TimeOut), total distance covered (Distance), areas (CoreArea and Area), and direction angles (MeanAngle and KappaAngle). A Principal Component Analysis (PCA) was conducted to obtain the scores for exploration, activity, and aggressiveness. Upon acquiring these scores, trait repeatability was computed using a Linear Mixed-Effects Model, fitting the experimental day (Day), the total length of the individual (Size), and the internal condition (Condition) as fixed factors, and the individual (ID) and the experimental week (Week) as random factors. The chronotype scores (Awakening Time and Rest Onset) were subsequently included in each dataset and refitted into the Linear Mixed-Effects Model, including chronotypes as fixed factors. Lastly, a Multivariate Generalised Linear Mixed Model was fit to each pair of laboratory-based traits to derive their correlations., The research was carried out within the framework of the activities of the Spanish Government through the "Maria de Maeztu Centre of Excellence" accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). The CLOCKS I+D+I project funded this work (grant no. PID2019-104940GA-I00) funded by MCIN/AEI/10.13039/501100011033 and the FSE invierte en tu futuro. The telemetry system was financed by the German Federal Ministry of Education and Research (Grant No. #033W024A). This work is a contribution of the Joint Researcher Unit IMEDEA-LIMIA., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for Numerical modeling of hydraulic stimulation of fractured crystalline rock at the Bedretto Underground Laboratory for Geosciences and Geoenergies

  • Vaezi, Iman
  • Alcolea, Andrés
  • Meier, Peter
  • Parisio, Francesco
  • Carrera, Jesús
  • Vilarrasa, Víctor
[Date of data collection] Feb. 2020 for field data and Jan. 2022- Jan. 2023 for numerical models., This dataset includes the input files of the numerical models used in the manuscript for simulating the hydraulic stimulation at the Bedretto lab. Each folder is named after the corresponding model in the manuscript, i.e., EP (Elastic Prescribed), EE (Elastic Embedded), and VE (Viscoplastic Embedded). In each folder, there is a file with the name of the folder ended as “_gen.dat” which contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ended as “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model. The file ended as “_bcf.dat” contains injection rate input., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. Swiss Federal Office of Energy within the framework of the ZoDrEx GEOTHERMICA project under contract SI/501720-01. European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. The “ZoDrEx” project, which has been subsidized through the ERANET Cofund GEOTHERMICA (Project No. 731117), from the European Commission and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., 1-EP_bcf.dat 1-EP_gen.dat 1-EP_gri.dat root.dat 2-EE_bcf.dat 2-EE_gen.dat 2-EE_gri.dat root.dat 3-VE_bcf.dat 3-VE_gen.dat 3-VE_gri.dat root.dat 3-VE-Extended_bcf.dat 3-VE-Extended_gen.dat 3-VE-Extended_gri.dat root.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Oxygen concentration in the water column over a Posidonia oceanica meadow in Cabrera Archipelago Marine-Terrestrial National Park between October 2019 – October 2021

  • Hendriks, Iris E.
  • Aramburu, Peru Agueda
  • Flecha, Susana
  • Morell, Carlos
[Description of methods used for collection/generation of data] For the study, environmental data were measured by sensors located in both the water column and the benthic compartment (at 4 m and 8 m, respectively). Temperature, salinity and dissolved oxygen (DO) from the water column were measured from October 2019 to October 2021 by a sensor attached to the mooring line. Data were recorded with a CT SBE37 (Conductivity, Temperature) sensor (SBE37SMP-ODO-RS232, Sea-Bird Scientific©) coupled with an SBE 63 (Sea-Bird Scientific©) dissolved oxygen (DO) sensor with accuracies of ± 0.002 °C for temperature, ± 0.002 mS cm-1 for conductivity and ± 2 % for DO. Measurements were taken with a resolution of 0.0001 ºC for temperature, 0.0001 mS cm−-1 for conductivity and 0.2 µmol kg-1 for DO. Multiparametric Hydrolab HL4 probes (OTT HydroMet) were deployed during 8 different periods covering all seasons following the procedure by Hendriks et al. (2021). Accuracy for the multiparametric probe sensors is ± 0.10 ºC for temperature and ± 0.5 % of reading + 0.001 mS cm−1 for conductivity, with resolutions of 0.01 ºC and 0.001 mS cm-−1, respectively. The DO sensor presents an accuracy of ± 0.1 mg L−1 for values lower than 8 mg L−1, and ± 0.2 mg L−1 for values higher than 8 mg L−1, and a resolution of 0.01 mg L−1. Two benthic chambers were installed during May and July 2021 using a design previously described in Barrón et al. (2006). MiniDOT sensors (PME, Inc. ©) were used for temperature and DO measurements every 15 minutes, with accuracies of ± 0.1 ºC and ± 5 %, respectively. DO sensor data were validated against water samples analysed with the Winkler method.. Three chamber replicates were installed during each deployment. Wind speed (m s−1) values at Cabrera NP Station were obtained from data provided by the Organismo Autónomo de Parques Nacionales (OAPN, Spain). For the benthic chambers, night respiration was estimated from changes in DO between one hour after sunset and one hour before sunrise. The same procedure was followed for the calculation of the net community production (NCP) during daylight hours, and the two values were summed for GPP. NCP was used along with the total meadow area coverage and residence time of water in Sta. María Bay to determine the total O2 exported by the meadow to the water column. For the metabolic rate calculation, only oxygen data from the first 24 hours were used., [Methods for processing the data] Seasonal variations in the metabolic rates were analysed with a one-way ANOVA test using the Statistics and Machine Learning ToolboxTM in Matlab® (https://mathworks.com). For this purpose, daily metabolic rates from water column sensors and multiparametric sensors were grouped by season . The same statistical analysis was performed to analyse disparities between sensors. Since benthic chamber data were only available for one day in May and one day in July, differences between deployments were tested using a Student t-test., readme provides background information for csv datafiles. Csv datafiles are processed data of oxygen concentrations used as input for the model, with a frequency of 10 minutes for hydrolab (HL) measurements and hourly for the CT measurements, and a frequency of 15 minutes for MiniDot measurements., The endemic angiosperm Posidonia oceanica plays a remarkable role as marine habitat and ecosystem service provider in shallow waters in the Mediterranean Basin through their vertical growth, oxygenation of the water column and as a carbon sink storing allochthonous carbon and biomass underneath the meadows. Here we assess the capacity of a pristine meadow at 8m depth in the PMNT Cabrera (Mallorca, Spain) to oxygenate the water column in the coastal area through monitoring of oxygen concentrations and subsequent evaluation of the metabolic rates from these profiles in the benthic as well as pelagic compartment. Here we report dissolved oxygen (DO) measurements from a CT at 4m dept with continuous (hourly) measurements from October 2019 to October 2021 as well as DO measurements from multiparameteric sensors in the meadow (8m depth) during some weeks in the same period and 2 evalautions of DO with closed incubations., Spanish Ministry of Science (SumaEco, RTI2018–095441-B-C21), the Government of the Balearic Islands through la Consellería d'Innovació, Recerca i Turisme (Projecte de recerca científica i tecnològica SEPPO, PRD2018/18), the Posi-COIN Project from the 2018 BBVA Foundation “Ayudas a equipos de investigación científica” call. STARTER research project funded by the 2021 call of the Càtedra de la Mar, Iberostar Foundation. This work is a contribution to CSIC's Thematic Interdisciplinary Platform PTI OCEANS+. The present research was carried out within the framework of the activities of the Spanish Government through the "Maria de Maeztu Centre of Excellence" accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for Effectiveness of Injection protocols for hydraulic stimulation in Enhanced Geothermal Systems

  • Tangirala, Sri Kalyan
  • Parisio, Francesco
  • Vaezi, Iman
  • Vilarrasa, Víctor
This dataset includes the input files of the numerical models used in the manuscript for simulating the hydraulic stimulation in Enhanced Geothermal System with a single fracture setup. Each folder is named after the corresponding injection protocol in the manuscript, i.e., Constant, Step, and Cyclic. In each of these folders, there are two subfolders namely- Without Bleedoff and With Bleedoff. In the subfolders, the file ending with “_gen.dat” contains the input data of the model, including material properties, initial and boundary conditions and the time intervals. There is also a file ending with “_gri.dat” that includes the information on the mesh. The file “root.dat” includes the name of the model., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. European Union’s Horizon 2020 Research and Innovation Program through the Marie Sklowdowska-Curie Individual Fellowship ARMISTICE, under Grant Agreement No. 882733. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (Grant CEX2021-001198)., README.txt (this file) Constant_0p3_gen.dat Constant_0p3_gri.dat root.dat Constant_0p3_bleedoff_gen.dat Constant_0p3_bleedoff_gri.dat root.dat Step_0p3_gen.dat Step_0p3_gri.dat root.dat Step_0p3_bleedoff_gen.dat Step_0p3_bleedoff_gri.dat root.dat Cyclic_0p3_gen.dat Cyclic_0p3_gri.dat root.dat Cyclic_0p3_bleedoff_gen.dat Cyclic_0p3_bleedoff_gri.dat root.dat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for analytical and numerical solutions of cyclic pore pressure diffusion equation

  • Sciandra, Dario
  • Kivi, Iman Rahimzadeh
  • Makhnenko, Roman Y.
  • Rebscher, Dorothee
  • Vilarrasa, Víctor
This dataset encompasses the input files associated with diverse analytical and numerical models investigating cyclic pressure diffusion within uniform poroelastic materials. The dataset is organized into two primary folders. The "Analytical Solutions" folder comprises three Python libraries containing the material properties and functions for calculating pressure amplitude at various distances. The "Numerical Solutions" folder contains simulations for both Hydraulic ("01_") and Hydro-Mechanical ("HM_") problems. The simulations are conducted for representative values corresponding to Berea sandstone ("BS_"), Opalinus Clay ("OPA_"), and Westerly granite ("WG_"), considering both monodimensional ("1D") and axisymmetric ("Ax") cases. Within each subfolder, files with the suffix "_gen.dat" provide input data for the model, encompassing material properties, initial and boundary conditions, and time intervals. Correspondingly, files concluding with "_gri.dat" contain information of the mesh employed. The "_bfc.dat" file documents the periodic injection pressure applied for each simulation, while the "root.dat" file specifies the model's nomenclature. To execute a model, launching the executable "Cb_v9_1_3par4.exe" within each ".gid" folder is sufficient., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., File List: README.txt (this file) \Analytical Solutions\CyclicDiffusion.py \Analytical Solutions\CyclicDiffusion_Adimensional.py \Analytical Solutions\Materials.py \Numerical Solutions\01_BS_1D_g0_1yr.gid \Numerical Solutions\01_BS_Ax_g0_1yr.gid \Numerical Solutions\01_OPA_1D_g0_1w.gid \Numerical Solutions\01_OPA_Ax_g0_1w.gid \Numerical Solutions\01_WG_1D.gid \Numerical Solutions\01_WG_Ax.gid \Numerical Solutions\HM_BS_1D_g0_1yr.gid \Numerical Solutions\HM_BS_Ax_g0_1yr.gid \Numerical Solutions\HM_OPA_1D_g0_1w.gid \Numerical Solutions\HM_OPA_Ax_g0_1w.gid \Numerical Solutions\HM_WG_1D.gid \Numerical Solutions\HM_WG_Ax.gid \Numerical Solutions\Cb_v9_1_3par4.exe, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for 3D numerical simulations of fractured specimen

  • Sciandra, Dario
  • Kim, Hyunbin
  • Makhnenko, Roman Y.
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
This dataset encompasses the input files associated with diverse numerical models investigating the hydro-mechanical behavior of a fractured specimen under different mean effective stresses. The folder contains simulations for Hydro-Mechanical ("HM_") problems. The simulations are conducted for different mean effective stresses ("P03"; "P05"; "P10"; "P15"; and "P20"). Within each subfolder, files with the suffix "_gen.dat" provide input data for the model, encompassing material properties, initial and boundary conditions, and time intervals. Correspondingly, files concluding with "_gri.dat" contain information on the mesh employed. To execute a model, launching the executable "Cb_v9_1_3par4.exe" within each ".gid" folder is sufficient., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., README.txt (this file) \HM_P03.gid \HM_P05.gid \HM_P10.gid \HM_P15.gid \HM_P20.gid \HM_P20_higherKn.gid, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

FaSt-SWOT multiplatform experiment raw dataset

  • Mourre, Baptiste
  • Gomez-Navarro, Laura
  • Verger-Miralles, Elisabet
  • Casas, Benjamín
  • Barceló-Llull, Bàrbara
  • Calafat, Noemí
  • Charcos-Llorens, Miguel
  • Cutolo, Eugenio
  • Díaz-Barroso, Lara
  • Fernández, Juan Gabriel
  • Lizarán, Irene
  • Miralles, Albert
  • Reyes, Emma
  • Roselló, Pere
  • Rodríguez-Tarry, Daniel
  • Tintoré, Joaquín
  • Wirth, Niko
  • Zarokanellos, Nikolaos
  • Pascual, Ananda
[Description of methods used for collection/generation of data] See Pascual et al. (2023, https://doi.org/10.20350/digitalCSIC/15276) and Mourre et al. (2024, https://doi.org/10.20350/digitalCSIC/16077)., This dataset includes all raw observations (mostly in native instrument format) collected during the FaSt-SWOT oceanographic campaign (R/V SOCIB) carried out in the Balearic Sea (Western Mediterranean) between 25 April and 10 May 2023 (Leg 1 from 25 to 28 April and Leg 2 from 7 to 10 May). This experiment was part of the FaSt-SWOT project (PID2021-122417NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER,UE), with the objectives to improve the characterization and understanding of small-scale ocean structures and contribute to SWOT satellite cal/val activities during its initial fast-sampling phase., Observations were collected both by ship-based instruments (CTD, Moving Vessel Profiler, thermosalinograph, ADCP and weather station) and autonomous platforms (surface drifters and gliders). They include measurements of both physical (temperature, salinity, currents) and biogeochemical (oxygen, chlorophyll, turbidity, photosynthetically active radiation) ocean variables., The data collection was mainly supported by the FaSt-SWOT project, funded by the Spanish Ministry of Science and Innovation, the Spanish Research Agency and the European Regional Development Fund (MCIN/AEI/10.13039/501100011033/FEDER, UE) under Grant Agreement PID2021-122417NB-I00. The project is conducted within the framework of the activities of the Spanish Government through the ”María de Maeztu Centre of Excellence” accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). The Spanish Ministry of Science and Innovation, the Regional Government of the Balearic Islands and the Spanish Research Council (CSIC) are also acknowledged for their support to the ICTS SOCIB. AP, BM and BBL thank the European Union funding through the EuroSea project, an Horizon 2020 research and innovation programme under grant agreement No 862626. LGN acknowledges funding of her Margarita Salas fellowship by European UnionNextGenerationEU, Ministry of Universities and Recovery, Transformation and Resilience Plan, through a call from the University of the Balearic Islands (Palma, Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., ADCP: Leg 1, Leg2.-- CTD: Leg 1, Leg2.-- Drifters: carthe, hereon.-- Gliders: sdeep01, sdeep09.-- GPS: Leg1, Leg2.-- Meteo: Leg1, Leg2.-- MVP: Leg1, Leg2.-- salinity_water_samples.-- Thermosalinograph: Leg1, Leg2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for On the limitations of closed loop geothermal systems for electricity generation outside high geothermal gradient field

  • Tangirala, Sri Kalyan
  • Vilarrasa, Víctor
This dataset includes the input files of the numerical models used in the manuscript for simulating the injection well and the horizontal wells of the Closed Loop Geothermal System (CLGS) setup. There are two main folders named Vertical and Horizontal that contain their respective models. In the vertical folder, there are 4 folders that contain the input files of the models. In the horizontal folder, there are 5 subfolders named with their corresponding surface flow rates (12.5, 25, 50 and 75 kg/s) and one with 30yr as the title that has models with 30 year duration. Each of these subfolders have the specific model folders containing their input files. In each of the model folder, there are the input files ending with “_gen.dat” containing the input data of the model, including material properties, initial and boundary conditions and the time intervals. There are also files ending with “_gri.dat” that include information on the mesh. The file “root.dat” includes the name of the model., European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST (www.georest.eu), under grant agreement No. 801809. IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MCIN/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Habitat complexity and fish data from restored and natural Eelgrass meadows from Sweden

  • Castro-Fernández, Julia
  • Terrados, Jorge
  • Hinz, Hilmar
  • Castejón-Silvo, Inés
  • Moksnes, Per-Olav
  • Infantes, Eduardo
[Description of methods used for collection/generation of data] The structural complexity of he natural and restored eelgrass (Zostera marina) meadows was quantified through three metrics: shoot density (shoots/m2), dry shoot biomass (g/m2), and canopy height (cm). Samples were collected in-situ at the planted areas and the interior part of the reference meadows by snorkeling divers in June 2023. Ten and five replicates of 452 cm2 were sampled in Askerön and Gåsö, respectively, in natural and restored Z. marina meadows by placing a 24 cm diameter bucket over the sediment and collecting by hand all the eelgrass shoots inside. Shoots were then placed in a plastic bag and transported to the laboratory. All shoots were counted, and the length of each leaf within a shoot was measured in ten shoots per each habitat and site. Subsequently, canopy height was estimated as 80% of the average maximum leaf length per shoot. All collected shoots were dried at 60ºC for 48 hours and weighed to quantify dry shoot biomass. Fish communities were surveyed on transects by snorkeling divers using a stereo-video system (Stereo Diver Operated Video, Stereo-DOV). Simultaneously, the divers used the traditional method of Underwater Visual Census (UVC) to record all fish observed on an underwater pad. Each transect lasted 7 minutes, covering an average of 140 m2 (70 x 2 m), and was separated to the next transect by at least 10 m. The samplings took place during daylight hours within the two study areas in June 2023. In Askerön, a total of 6 transects for each method were performed on each habitat (i.e. edge, meadow and sand) except for the replanted habitat, where 10 transects were performed. In Gåsö, 9 transects for each method were performed on both the meadow and edge habitats and 13 on each of the replanted and sand habitats. Each observed fish with both methods was identified to the lowest taxonomic level (species level when possible). With Stereo-DOV fish were measured for total length (TL) to enable subsequent biomass estimations. However, with UVC fish were only counted, and their TL was not estimated with this method., [Methods for processing the data] The stereo pairs of recorded videos were analyzed with EventMeasure software, where fish TL was measured by marking each fish from the tip of the snout to the tip of the tail in both videos (left and right). To ensure accuracy and precision to the millimeter level, fish lengths were only measured when individuals were at less than 7 m from the cameras and exhibited one of their body sides straight to the cameras. Fish individuals that did not meet these criteria were excluded from measurement and only identified and counted., This dataset includes structural complexity and fish data from June 2023 from two areas in the West coast of Sweden (Skagerrak): 1) Bay of Askerön; and 2) Bay in the island of Gåsö; where two eelgrass (Zostera marina) plantations were conducted in 2021 and 2019 respectively. The samplings took place during daylight hours within the two study areas in June 2023. The structural complexity of the restored and natural (reference) eelgrass meadows was quantified through three metrics: shoot density (shoots/m2), dry shoot biomass (g/m2), and canopy height (cm). Fish communities were surveyed on transects by snorkeling divers using a stereo-video system (Stereo-DOV) and Underwater Visual Census (UVC) simultaneously. Each transect lasted 7 minutes, covering an average of 140 m2 (70 x 2 m). Each observed fish with both methods was identified to the species level when possible. With Stereo-DOV fish were also measured for total length (TL) to enable subsequent biomass estimations., This work was funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 869300 ‘FutureMARES’, the research contract ‘Restoration of Posidonia oceanica meadow. REE Marine Forest’ signed between Red Eléctrica de España and CSIC, and the project PROFISH (PGC2018-096256-B-I00) funded by FEDER/Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación. This work was carried out within the framework of the activities of the Spanish Government through the ‘Maria de Maeztu Centre of Excellence’ accreditation to the IMEDEA (CSIC-UIB) (CEX2021-001198). J.C.F. was supported by a PhD grant (FPU programme) from the Spanish Ministry of Science, Innovation, and Universities; and by an ERASMUS+ Traineeship grant., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001198)., Castro-Fernández_etal_2025_DATASET_EELGRASS.xlsx, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data supporting the article "Temporal and spatial heterogeneity in dispersal and demography of a long-lived philopatric seabird"

  • Payo-Payo, Ana
  • Rotger, Andreu
  • Picorelli, Virginia
  • Viñas Torres, Mariana
  • Cardona, Esteban
  • Martínez, Oliver
  • Sanz-Aguilar, Ana
[Description of methods used for collection/generation of data] - Monitoring of Storm Petrel nests in the Cap d Es Migdia cave. - Capture recapture of adults using hand capture. - Tick counts on chicks (2018 2020). - Recording of breeding success, nest fidelity, and individual recaptures., [Methods for processing the data] - Data cleaning and structuring in R. - GLMMs fitted using the glmmTMB package. - Multievent capture recapture models fitted in E-SURGE. - Population matrix modelling performed in R., 1.Individuals make habitat selection decisions at different moments of their life and in heterogeneous habitats. Understanding the links between environmental changes and demographic patterns during the individuals’ life is therefore critical to predict long term eco-evolutionary dynamics and species persistence. However, fitness and persistence consequences of habitat selection are seldom addressed in demographic studies., 2. We used long-term capture-recapture data of Mediterranean Storm Petrels to investigate how habitat-selection decisions are made at different spatial (i.e. among and within breeding zones) and temporal scales (i.e. natal and breeding fidelity) in a colony characterized by significant variation in habitat quality due to contrasting parasite infestation levels. Specifically, we evaluate whether birds hatched in and/or breeding at different zones experience different (1) fitness components (i.e., breeding success and survival) and (2) fidelity (i.e. natal and breeding fidelity). In addition, we (3) explore the causes, environmental cues and consequences of nest fidelity vs dispersal. Finally, we project (4) how these differences influence population dynamics and persistence (i.e. population growth rate)., 3. Our findings reveal that habitat selection decisions have synergistic fitness consequences on multiple temporal and spatial scales considered. Specifically, breeders in the lower quality habitat zone (i.e. high tick infestation) exhibited reduced breeding success, local survival and nest fidelity but remained within their zone. Breeding success of individuals exhibiting nest dispersal marginally increased. Moreover, natal fidelity was lowest at the zone where fitness was highest. Overall, population growth rate at the colony suggests an annual population decline between 6 and 10%. Individuals seem to base their dispersal decision, but not their habitat selection choices on public information. As a result, birds do not experience increased fitness, indicating the potential presence of an evolutionary trap., 4. Understanding the interplay between synergistic and opposing habitat choices is central to understanding species eco-evolutionary dynamics. Further, our results highlight exciting avenues for future research, when aiming to understand the complex and fundamental roles played by heterogeneity in habitat quality in species demography and eco-evolutionary dynamics, with significant implications for species management and conservation strategies. , Biodiversa+ European Biodiversity Partnership (BiodivMon 2022 2023 Joint Call), co-funded by the European Commission (GA 101052342) and Fundación Biodiversidad (Project SEAGHOSTS). Government of the Balearic Islands, Vicen Mut Postdoctoral Fellowship (PD0042022). Conselleria de Medi Ambient i Territori, Govern de les Illes Balears. IMeDEA (CSIC-UIB), María de Maeztu Excellence Unit (CEX2021-001198, MCIN/AEI)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File List: Tick infestation & chick survival: - 1.Chicks_ticks_Espartar_2018_2020_.rds - 2.Chick_fate_by_MaxNtick_Zone_.rds - 6.1.Nticks_by_zone_pred.rds - 6.2.Chick_fate_by_zone_pred.rds Reproduction & breeding success: - 3.1.BS_experience_2015_2022_.Rds - 6.3.BS_by_zone_pred.rds Nest fidelity & nest dispersal: - 4.Nest_change_storm_petrel_Espartar_2014_2022_.rds - 5.Causes_nest_change.rds - 5.Information_nest_change.rds - 7.Consequences_nest_change.rds - 6.4.Nest_fid_by_zone_pred.rds Demographic projections & population dynamics: - CensusData.rds - param.rds - param_scenario.rds - 6.5.Fig_vital_rates.rds - 6.6.Fig_Observed_lambda.rds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Role of Hydrodynamics in the Synchronisation of Chlamydomonas Flagella: Supplementary Data and Movies

  • Zorrilla, Luc
  • Allard, Antoine
  • Desai, Krish
  • Polin, Marco
Data and Movies for the paper "The role of hydrodynamics in the synchronisation of Chlamydomonas flagella" by Luc Zorrilla et al. For more informations, see the file readme.txt., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Worldwide Appraisal of Knowledge Gaps in the Space Usage of Small Pelagic Fish: Highlights Across Stock Uncertainties and Research Priorities [Dataset]

  • Catalán, Ignacio Alberto
  • Bowlin, Noelle M.
  • Baker, Matthew R.
  • Berg, Florian
  • Brazier, Aaron
  • Brochier, Timothée
  • Del Favero, Jana M.
  • Garrido, Susana
  • Gherardi, Douglas F. M.
  • Haase, Stefanie
  • Huret, Martin
  • Kloppmann, Matthias
  • Kooij, Jeroen van der
  • de Souza Moraes, Luiz Eduardo
  • Moyano, Marta
  • Nash, Richard D. M.
  • Parada, Carolina
  • Peck, Myron A.
  • Polte, Patrick
  • Riveiro, Isabel
  • Takahashi, Motomitsu
  • Gutiérrez, Mariano
  • Vásquez, Sebastián I.
  • Ospina-Álvarez, Andrés
Understanding the spatial structure of life cycle components of small pelagic fish (SPF) stocks is key for deciphering population dynamics and ensuring sustainable management. The spatial extent of different life stages and ecologically relevant processes (e.g., reproduction) is temporally dynamic and responds to environmental, genetic, and demographic constraints. Knowledge gaps on within-stock spatial variability of key life cycle processes for SPF worldwide were identified for clupeoid fish (Clupeidae/Engraulidae). From the 3229 Web of Science-indexed articles reviewed, data were systematically extracted from 299. This information was supplemented with another 105 documents and databases from official SPF surveys and stock assessments. Overall, this review compiled information from 111 datasets (77 stocks) involving 17 assessed or commercially relevant species across 19 Large Marine Ecosystems (LMEs) and 38 coastal ecoregions. Only approximately 40% of the stocks used in this study covered the known or presumed stock distribution for at least one life-cycle variable: Adults (feeding area, spawning migration, feeding migration, overwintering migration, spawning area, and presence/biomass), juveniles (presence/biomass, nursery area), and larvae (larval routes). Despite more extensive spatial information from some Eastern Boundary Upwelling Systems (EBUS) and long-managed stocks, some important gaps remain due to information quality, stock identity ambiguity, or spatial data biases. Key information on SPF spatial variability could be extracted from existing surveys, but there were various limitations due to data access and spatiotemporal coverage. The main consequences of the key identified gaps are reviewed, and a series of priority research/monitoring actions are recommended to mitigate these consequences and improve our ability to address spatial variability in SPF stocks., This work was supported by the Spanish Government through the framework of the “Maria de Maeztu Center of Excellence” grant (number CEX2021-001198) accredited to the IMEDEA (CSIC-UIB). S.I.V. was supported by the Chilean National Research and Development Agency (ANID) with the doctoral grant 21221020., With funding form the Spanish government through the “María de Maeztu Unit of Excellence” accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Using animal tracking for early detection of mass poisoning events

  • Curk, Teja
  • Santangeli, Andrea
  • Rast, Wanja
  • Portas, Ruben
  • Shatumbu, Gabriel
  • Cloete, Claudine
  • Beytell, Piet;
  • Aschenborn, Ortwin
  • Melzheimer, Joerg
1 Amidst the sixth mass extinction, some animal groups, such as vultures, the only obligate scavengers among vertebrates, are disappearing at an unprecedented rate. Vulture populations worldwide are declining, primarily due to poisoning. As many vulture species are social foragers, they can congregate in large numbers to scavenge at a carcass, potentially increasing their exposure to poisoning risk. Current anti-poisoning prevention and mitigation measures are insufficient to tackle this threat. There is an urgent need for new effective strategies to prevent mass vulture mortality. 2 In this study, we applied agent-based modelling using white-backed vulture (Gyps africanus) data from Namibia to: (1) quantify the impact of different foraging strategies on vulture poisoning risk, and (2) evaluate the cost-effectiveness of using vultures as sentinels for poisoning detection. This approach involves GPS tracking of various numbers of vultures and using the data to quickly detect poisoning incidents and decontaminate carcasses. These actions help mitigate further vulture mortality and prevent mass poisoning. 3 Our findings demonstrate that social foraging significantly increases the risk of poisoning among white-backed vultures. However, GPS tracking of individual vultures enables earlier detection of poisoning events, thereby reducing associated mortalities. Poisoning mitigation effectiveness improves with both the number of tracked individuals and the speed of decontamination response. According to our agent-based model tailored to our study system and species, tracking approximately 5% of the population (25 individuals) offers a good balance between cost and effectiveness, requiring an estimated budget of USD 60,000. Using this strategy and approach, and assuming a response time within two hours, up to 45% of poisoning-related deaths could be prevented. 4 Synthesis and applications: Our results suggest that, in order to reduce mortality incidences from poisoning in our study system and species, it is sufficient to track a small proportion of the vulture population, which would act as sentinels for the rest. By evaluating the costs and ecological benefits of alternative strategies, varying in number of birds tagged or response time, we provide evidence-based solutions that practitioners can use to design conservation plans. These findings are therefore instrumental in supporting vulture and scavenger conservation policy and practice., We thank the Federal Ministry for Economic Affairs and Climate Action of Germany and the German Aerospace Center for their support. Andrea Santangeli acknowledges funding from the European Commission's Horizon 2020 Marie Skłodowska-Curie Actions (Grant no. 101027534) and IMEDEA's "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Database of the blue carbon inventory in Spain and Portugal. Organic carbon biomass and soil stocks and sequestration rates to the soil.

  • Piñeiro Juncal, Nerea
  • Serrano, Oscar
  • Santos, Carmen B. de los
  • Marbà, Núria
  • Díaz-Almela, Elena
  • Tuya, Fernando
  • Mazarrasa, Inés
  • Garmendia, Joxe Mikel
  • Otero, Xosé Luis
  • Inostroza, Karina
  • Pagès, Jordi F.
  • Méndez Martínez, Gonzalo
  • Fernández, E.
  • Sousa, Ana I.
  • Camacho, A.
  • Ballesteros, Enric
  • Barañano, Carlota
  • Belshe, E. Fay
  • Bernabeu, Irene
  • Brun, Fernando G.
  • Camacho-Santamaría, Alba
  • Delgado Huertas, Antonio
  • Dahl, Martin
  • Duarte, Carlos M.
  • Espino, Fernando
  • Franco, Javier
  • Freitas, Maria de Conceiçao
  • García-Orellana, Jordi
  • Garrigos, Bernat
  • Gomis, Enric
  • Haroun, Ricardo
  • Hernández, Ignacio
  • Juanes, José A.
  • Leiva-Dueñas, Carmen
  • Lavery, Paul S.
  • Lilebo, Ana
  • Lopes, Vera
  • Majténti-Hill, Claudia
  • Marco-Méndez, Candela
  • Martins, Marcio
  • Monnier, Briac
  • Morant, Daniel
  • Montero, Natalia
  • Neto, Joao M.
  • Ondiviela, Bárbara
  • Peralta González, Gloria
  • Picazo Mozo, Antonio
  • Reithmaier, Gloria Maria Susanne
  • Rochera, Carlos
  • Román, Marta
  • Santos, Isaac
  • Santos, Rui
  • Serrano, Eduard
  • Soler Roig, Montserrat
  • Yau Yau, Yu
  • Weitzmann, Boris
  • Zribi, Imen
  • Mateo, Miguel Ángel
This database is a compilation of published and unpublished data used to estimate (i) the organic carbon biomass stocks, (ii) the soil organic carbon stock, and (iii) the rates of organic carbon sequestration to the soil associated to Spanish and Portuguese seagrass meadows and salt marshes., This work is a contribution of the groups Group of Benthic Ecology (SGR-00405), Group of Aquatic Macrophyte Ecology (GAME-CSIC-632711), the Spanish Group of Experts in Blue Carbon Ecosystems (G3ECA - RED2024-153711-E), and the CSIC Interdisciplinary Thematic Platform OCEANS+, funded by the European Union-Next Generation EU Agreement between MITECO, CSIC, AZTI, SOCIB, and the universities of Vigo and Cadiz, to promote research and generate scientific knowledge in the field of marine sustainability. This work has received financial support from the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019-2022), the European Union (European Regional Development Fund - ERDF) and the FCT-Foundation for Science and Technology for the financial support to CESAM (UIDB/50017/2020 + UIDP/50017/2020 + LA/P/0094/2020). NPJ was supported by a Juan de la Cierva fellowship (JDC2022-048342-I, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR”). CBdlS received Portuguese national funds from FCT - Foundation for Science and Technology through projects UIDB/04326/2020 (DOI:10.54499/UIDB/04326/2020) and LA/P/0101/2020 (DOI:10.54499/LA/P/0101/2020) and 2020.03825.CEECIND (DOI:10.54499/2020.03825.CEECIND/CP1597/CT0005). MM was funded through an FCT PhD grant (DOI:10.54499/2020.06996.BD). JFP acknowledges funding by the project PID2023-151732OA-I00 and contract RYC2022-036196-I, awarded by MCIN/AEI/10.13039/501100011033 and the FSE+. MR was supported by a post-doc fellowship from the Xunta de Galicia (ED481A-2020/199). A.C-S was supported by a FPU Predoctoral Scholarship by the Spanish Ministry of Science Innovation and Universities under Grant FPU21/04314. This work was supported by projects LIFE BLUE NATURA (LIFE14CCM/ES/000957), funded by European Union; CLIMAWET-CONS (PID2019-104742RB-I00) and WETCARVER (PDC2022–133205–I00), funded by MICINN and/or AEI, of the Spanish Government, supported with FEDER–EU and MRR–EU Funds, respectively; project SEAFRONT (TED2021-132132B-C22, Spanish Ministry of Science and Innovation) and the framework of the activities of the Spanish Government through the "Maria de Maeztu Centre of Excellence" accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). We acknowledge the support of the Spanish MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/ PRTR (TED2021-129973B-I00; Restoration beyond biodiversity: How to integrate estuarine ecosystem services into nature-based management (MarshA) to B.O); and the Portuguese Fundação para a Ciência e Tecnologia, FCT, I.P./MCTES through national funds (PIDDAC): UID/50019/2025 and LA/P/0068/2020 https://doi.org/10.54499/LA/P/0068/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Datasets, software, and figure-source files for injection-induced ground deformation prediction using deep learning

  • Guo, Tian
  • Wu, Haiqing
  • Vilarrasa, Víctor
[Description of methods used for collection/generation of data] Synthetic data are generated from an analytical solution for ground displacement due to reservoir pressurization in a faulted half-space. The independent test dataset was derived from CODE_BRIGHT numerical simulations. Figure-source data were assembled from parameter-sweep test cases and DNN predictions., [Methods for processing the data] Preprocessing includes feature transformation, filtering, standardization using StandardScaler, Pearson correlation analysis, PCA, and assembly of curated figure-source spreadsheets., [Link to other publicly accessible locations of the data] https://github.com/Tiinnaa/DNN-ground-deformation, Data are released under the Creative Commons Attribution 4.0 International License (CC BY 4.0)., The authors acknowledge funding from the EU Horizon Europe Research and Innovation Program through the Doctoral Network of the Marie Sklodowska-Curie Actions SMILE (https://smile-msca-dn.eu/), under grant agreement 101073281. IMEDEA is an accredited Maria de Maeztu Excellence Unit (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File List: - data/test/final_combined_test_dataset.csv: Independent CODE_BRIGHT test dataset. - data/comparison_data/dp_dis_1_5_10.csv: Dataset used by legacy exploratory evaluation scripts. - results/figure_data/disxpred1111.xlsx: Curated figure-source data for Figure 9, horizontal displacement Ux. - results/figure_data/disypred1113.xlsx: Curated figure-source data for Figure 10, vertical displacement Uy. - results/training_logs/training_metrics_x.csv: DNN training metrics for Ux. - results/training_logs/training_metrics_y.csv: DNN training metrics for Uy. - results/training_logs/learning_curve_results_Ux.csv: Learning-curve data for the available Ux model run. - results/inference_speed/prediction_time_results.csv: Prediction time results. - results/inference_speed/final_speed_report.csv: Selected benchmark speed report. - results/summary_plot_Ux.png: Summary plot from the available Ux model run., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data from: From species lists to interactions: Network structure, not richness, guides seed dispersal management in human-modified islands

  • Costa, Alba
  • Nogales, Manuel
  • Traveset, Anna
  • Kaiser-Bunbury, Christopher N.
  • Zora, Anna
  • Berke, Gregory
  • Hervías-Parejo, Sandra
Seed dispersal by animals supports plant regeneration and ecosystem resilience, yet conservation success is still commonly evaluated using species richness rather than the organisation of ecological interactions. This is particularly problematic in human-modified ecosystems, where management interventions can increase diversity without restoring historical interaction structures or functional stability. We compared seed dispersal networks on two climatically and biogeographically similar oceanic islands in the Seychelles archipelago with contrasting management trajectories: one strictly protected and under historically oriented management, aimed at limiting introductions and maintaining historically informed community structure, and one anthropogenically diversified through long-term human occupation and species introductions. Using a multi-metric ecological network approach integrating modularity-based roles, centrality indices and motif analyses, we quantified how plants and dispersers contribute to network structure under each management context. Anthropogenic diversification increased interaction diversity and the number of dispersal events but resulted in a less cohesive network dominated by peripheral species and a narrow set of structurally central dispersers. In contrast, the historically oriented management island exhibited lower interaction diversity but greater network cohesion, with strong redundancy in plant-level dispersal pathways. Shared species occupied different structural roles across islands, indicating strong context dependence in their contribution to seed dispersal networks. Motif analyses revealed contrasting interaction niche structures across management contexts. In the anthropogenically diversified island, dispersal relied on a small set of generalist dispersers, suggesting potential vulnerability to their loss. In the historically oriented management island, dispersal was spread across more species, indicating greater redundancy. These differences imply distinct but predictable vulnerabilities arising from alternative management pathways. Our findings show that management strategies can create fundamentally different seed dispersal regimes, even under similar environmental conditions. Anthropogenic diversification reshapes network organisation into distinct structural configurations, rather than consistently enhancing overall cohesion. Incorporating interaction structure into conservation planning can help prioritise key dispersers and plants, anticipate hidden vulnerabilities, and guide management actions that better sustain seed dispersal processes in human-modified island ecosystems., European Research Council: 101054177, Agencia Estatal de Investigación: CEX2021-001198., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

A Drifter Dataset for the Western Mediterranean Sea collected during the SWOT mission calibration and validation phase

  • Demol, Margot
  • Maristella, Berta
  • Gomez-Navarro, Laura
  • Izard, Lloyd
  • Ardhuin, Fabrice
  • Bellacicco, Marco
  • Centurioni, Luca
  • D'Ovidio, Francesco
  • Díaz-Barroso, Lara
  • Doglioli, Andrea
  • Dumas, Franck
  • Garreau, Pierre
  • Aude, Joël
  • Lizarán, Irene
  • Menna, Milena
  • Mironov, Alexe
  • Mourre, Baptiste
  • Pacciaroni. Massimo
  • Pascual. Ananda
  • Ponte, Aurelien
  • Reyes, Emma
  • Rousselet, Louise
  • Tarry, Daniel R.
  • Verger-Miralles, Elisabet
These data were collected and are freely available from the authors. Users assume all risks associated with their use and must provide citations in any publication or product using the data. Prior to any commercial use, users must contact the PIs. We encourage questions and feedback to the corresponding authors listed in the abstract. In line with the collaborative spirit of this dataset's release, we kindly request notification of any publications or ongoing studies using these data., The two smoothing methods used to produce the L2-trajectories were tested through a benchmarking study using synthetic trajectories with a focus on minimizing the accelerations errors. This study allows to optimize and fix the different parameters and will be the subject of another publication. These two methods were found to give similar results in terms of accelerations errors variance (3-4% in the studied case) and so both were implemented on the L1-trajectories to get the L2 ones., The BioSWOT-Med (10.17600/18002392) and the C-SWOT-2023 (10.17600/18002077) cruises were part of the TOSCA/CNES project BioSWOT-AdAC (https://www.swot-adac.org). The FaSt-SWOT project is funded by the Spanish Ministry of Science and Innovation, the Spanish Research Agency and the European Regional Development Fund (MCIN/AEI/10.13039/501100011033/FUE, grant PID2021-122417NB-I00). It is supported by the Spanish Government through the ”Maria de Maeztu Centre of Excellence” accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). The Regional Government of the Balearic Islands and the CSIC are also acknowledged for their support to the ICTS SOCIB. The type of drifters and their providers for BioSWOT-Med are : CARTHE, M. Berta and M. Magaldi (ISMAR-CNR), SINAPSI project (EU funded, PC Interreg VA IFM 2014-2020, Prot. CNR-ISMAR n.4632, September 26, 2019) and the JERICO-S3 project (EU funded, H2020, grant number 871153); CODE and SVP, M.Menna (OGS), ARGO-ITALY (program funded by the Italien Ministry of university and Research); SVP, L.Centurioni (SCRIPPS); BCG-SVP, M.Bellacicco (ISMAR-CNR). For CSWOT : CARTHE, A. Ponte and M.Demol (LOPS-IFREMER) via the SWOT TOSCA/CNES project DIEGO; SVP, F. Dumas (SHOM); SPOTTER, F. Ardhuin (LOPS-IFREMER); MELODI, Eodyn. And for FaSt-SWOT : SVP-B ; SOCIB and L. Centurioni ( SIO) as part of the Global Drifter Program (SIO, NOAA); CARTHE and HEREON, A. Pascual and B. Mourre (IMEDEA, CSIC-UIB). We acknowledge Jochen Horstmann and Ruben Carrasco for their support concerning the management of HEREON drifters. Drifter deployment followed a Lagrangian sampling strategy, with near-real-time data and technical support provided by the SWOT-AdAC Consortium, with contributions from CNES, LOCEAN, SIP and MIO. The collaborative effort to produce a unified dataset was supported by SWOT-AdAC, and we acknowledge SIP for their technical assistance in deploying software for online data visualisation., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset for Thermoporoelastic flow control strategies for enhancing the longevity of hydraulic fracture-based enhanced geothermal systems

  • Tangirala, Sri Kalyan
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
ResFrac is a commercial software and requires a license to use it., [Relationship between files, if important] Folders named no_FCDs and with_FCDs contain the models where no FCDs were used and the models where FCDs were used. The no_FCDs folder contains 6 subfolders, each of which have their respective model files. The with_FCDs folder has 3 subfolders where 135kgps and 150kgps, each have 3 of their own subfolders that contain the model files corresponding to when the FCDs were activated during circulation. The pre existing fracture folder in the with_FCDs folder has its model files where FCDs were activated from the beginning of circulation., This dataset includes the input files of the numerical models used in the manuscript for simulating different cases of the hydraulic fracture-based Enhanced Geothermal Systems (EGS). There are two main folders named ‘no_FCDs’ and ‘with_FCDs’ that contain subfolders corresponding to their different circulation flow rates and pre-existing fracture cases. In the no_FCDs folder, there are 6 subfolders where 5 of them are named with their circulation flow rates (90 kgps, 105 kgps, 120 kgps, 135 kgps and 150 kgps) and another subfolder named ‘pre existing fracture’. The folder named with_FCDs has three folders named ‘135 kgps’, ‘150 kgps’ and ‘pre existing fracture’. The 135 kgps folder has subfolders named ‘from start’, ‘from 21 yr’ and ‘from 24 yr’. The 150 kgps folder has subfolders named ‘from start’, ‘from 13 yr’ and ‘from 16 yr’. Within each subfolder, the model is defined by two text files in a ResFrac-specific keyword format. The 'settings' file and the 'input' file together contain the simulation-specific parameters, including material and formation properties, initial and boundary conditions, the mesh definition (matrix region extent and element sizing), the fluid and relative permeability models, and the well controls and treatment schedule. Because the model was built on a rectilinear grid within the user interface, no separate mesh file is generated and the gridding is contained directly within these input files., S.K.T. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon Europe Research and Innovation Program through the Proof of Concept NOSHAKE under Grant agreement No. 101248689. I.R.K. acknowledges funding from MICIU/AEI /10.13039/501100011033 and from the FSE+ through the ‘Ramón y Cajal’ fellowship (reference RYC2024-048711-I). V.V. acknowledges support from the Spanish Ministry of Science, Innovation and Universities through the project HydroPoreII (PID2022-137652NB-C44). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File List: README.txt (this file) no_FCDs input_TE_on_90_fln2_noFCDn_45.txt settings_TE_on_90_fln2_noFCDn_45.txt input_TE_on_105_fln2_noFCDn_45.txt settings_TE_on_105_fln2_noFCDn_45.txt input_TE_on_120_fln2_noFCDn_45y.txt settings_TE_on_120_fln2_noFCDn_45y.txt input_TE_on_135_fln2_noFCDn_45y.txt settings_TE_on_135_fln2_noFCDn_45y.txt input_TE_on_150_fln2_noFCDn_45y.txt settings_TE_on_150_fln2_noFCDn_45y.txt input_TE_on_120_fln2_noFCDn_crack1.txt settings_TE_on_120_fln2_noFCDn_crack1.txt with_FCDs input_TE_on_135_fln2_FCDn0p125_45y.txt settings_TE_on_135_fln2_FCDn0p125_45y.txt input_TE_on_135_fln2_21yFCDn45y.txt settings_TE_on_135_fln2_21yFCDn45y.txt input_TE_on_135_fln2_FCDn_24_45.txt settings_TE_on_135_fln2_FCDn_24_45.txt input_TE_on_150_fln2_FCD0p125_45y.txt settings_TE_on_150_fln2_FCD0p125_45y.txt input_TE_on_150_fln2_13yFCDn0p125_45.txt settings_TE_on_150_fln2_13yFCDn0p125_45.txt input_TE_on_150_fln2_FCDn_16_45.txt settings_TE_on_150_fln2_FCDn_16_45.txt input_TE_on_120_fln2_FCDn_crack.txt settings_TE_on_120_fln2_FCDn_crack.txt These models were simulated using a commercial software ResFrac. In order to run the models, a valid license needs to be taken from ResFrac to use their simulator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Dataset, code, and figure outputs for “What controls maximum injection-induced earthquake magnitude?”

  • Sachdeva, Sanchit
  • Kivi, Iman Rahimzadeh
  • Mukuhira, Yusuke
  • Vilarrasa, Víctor
[Description of methods used for collection or generation of data] Selected variables from the open-access GEoREST database were characterized, and rock names were standardized into 12 categories. Missing values were filled using literature values, deterministic calculations, and random-forest regression. Moment_Max was neither imputed nor used for imputation. Two LightGBM models were compared: an injection-only model and a full 12-feature model. Data were divided into 90% training and 10% testing subsets. Predictors were normalized from 0 to 1 using training-set ranges only., [Description of data processing and preparation] 1. Select and filter the GEoREST variables. 2. Fill supported literature values. 3. Calculate deterministic elastic and stress properties. 4. Impute remaining eligible values using random forests. 5. Merge the completed data and train the LightGBM models. Excel colours show provenance: white = original, yellow = literature, orange = random forest, and green = deterministic. Full processing details are provided in the scripts., [Codebooks or data dictionaries] This README documents the final variables. The original GEoREST workbook and Kivi et al. (2023) provide the source-variable definitions., Fluid injection into the subsurface for energy and resource development has led to increased seismic activity in recent years. Understanding the key factors governing maximum induced earthquake magnitude remains critical for their improved prediction and risk assessment. In this study, we apply a machine-learning model using the LightGBM algorithm to a global induced seismicity database spanning multiple geoenergy applications and settings to identify major factors associated with maximum injection-induced moment magnitude. We find that incorporating operational parameters, site characteristics, and host rock properties as input variables, compared to only operational parameters, significantly increases the predictive model accuracy. Cumulative injected fluid volume and injection rate impose first-order controls on seismic magnitude, while rock porosity, permeability, pore pressure, and in-situ stress field are found to play important secondary roles. These results highlight the importance of physical site characteristics beyond injection parameters in enriching magnitude-scaling relations and developing more reliable, physics-based seismicity forecasting and risk mitigation strategies., - The authors acknowledge support for data collection from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the starting grant GEoREST under grant agreement no. 801809. - S.S. and V.V. acknowledge funding from the European Research Council through the Horizon Europe Proof-of-Concept project NOSHAKE, Grant Agreement No. 101248689. - I.R.K. acknowledges funding from MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+) through the Ramón y Cajal fellowship RYC2024-048711-I. - IMEDEA is a María de Maeztu Excellence Unit supported by Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File list Main files - README.md: workflow guide. - README_DATASETS.txt: dataset metadata. - requirements.txt: Python dependencies. - rf_script.py: random-forest imputation. - principal_stress_rf_script.py: principal-stress imputation. - final_dataset_script.py: final data merge and deterministic recalculation. - lightgbm_base_script.py: baseline LightGBM workflow. - lightgbm_normalization_script.py: normalized LightGBM workflow and figures. 01_Data_Curation - GEoREST_induced_seismicity_database_v20.11.2022.xlsx/.csv: source dataset. - DataCuration.xlsx: selected, standardized, literature-filled, and deterministic data. - Literature/RockProperties_4.png to RockProperties_8.png: literature tables used for filling rock properties. 02_RF_Imputation - RF_Datacurated.xlsx: random-forest-imputed data. - Audit_Outputs/principal_stress_values.csv: imputed principal stresses. - Audit_Outputs/principal_stress_validation.csv: stress-imputation validation. 03_Model_Training - Final_Imputed_Dataset.xlsx/.csv: final model input. - Previous_Baseline/Mean_RockSiteInjection.xlsx: earlier comparison dataset. - Results/model_comparison.csv: model-performance summary. - Results/new_v2_all_row_predictions.csv: model predictions. - Results/normalization_ranges.csv: training-set normalization ranges. - Results/normalized_labelled_model_inputs.csv: normalized model inputs. - Results/comparison_report.json: model settings and validation report. - Results/LightGBM_V2_TestV1_model.txt: trained LightGBM model. - Figures/F10.png, F21.jpg, F31.png, and F32.png: manuscript figures., Peer reviewed