Skip to main content

SENSORES DE FIBRA OPTICA PARA SEGURIDAD Y PROTECCION

TEC2013-47264-C2-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2013
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contribution to the advancement of Brillouin optical time-domain analysis sensors

  • Iribas Pardo, Haritz
Distributed fiber optic sensors (DFOS) are becoming an increasingly used technology to monitor the integrity of structures. This is due to the fact that this technology can be embedded within the structure and provide distributed information of several relevant parameters for the structure, such as stress, temperature or strain. In DFOS the fiber itself is the transducer, and the measurement of a given parameter is provided continuously along the fiber at a particular spatial resolution, without blind spots. This is the main advantage of DFOS compared to other sensing technologies, the fact that DFOS provide information of a given parameter over thousands or hundreds of thousands of positions along the optical fiber. Conversely, other sensing technologies only give information over the specific points where they are installed, that is to say, they are point sensors. This characteristic of distributed fiber sensors makes them enormously interesting when many points of a structure need to be monitored. In this case, a single distributed fiber sensor can replace many point sensors, which considerably reduces the cost per sensing point when monitoring large structures. In addition, due to the properties of the optical fiber, these sensors have a better performance compared to other kind of sensors. Among other important features, DFOS present a low signal loss, electromagnetic interference immunity, remote sensing and multiplexing capabilities, light weight, and are chemically passive, which make them a very attractive technology for field measurements. Therefore, DFOS have the added advantage of being electrically, magnetically, and chemically passive, so that can be placed in harsh environments, such as nuclear plants or areas with gas concentration, where, due to the possibility of a short circuit, electronic sensors cannot be placed. Al these characteristics make this technology unique. Among the different types of DFOS, those based on stimulated Brillouin scattering, and more specifically, those that build upon the Brillouin optical time-domain analysis (BOTDA) technique, are one of the most promising. The main characteristic that makes BOTDA sensors as promising, is the ability to perform distributed strain and temperature measurements over long distances at high spatial resolution. For the functioning of the sensor, the general interaction that takes place in the BOTDA technique involves two optical waves: a continuous wave probe and a counter-propagating pump pulse. The performance of the sensor response is limited, among others, by the maximum optical power of both waves that can be injected into the fiber. In this way, the main research line in BOTDA sensors is focused on the study of the physical limitations of the technique as well as the development of solutions to these constraints. Another important line relies on the simplification of the sensor setup so as to reduce the complexity and the cost of the sensor. This thesis dissertation contributes to the development of BOTDA sensors by means of different contributions in these two research lines. Several theoretical and experimental studies have been conducted to accurately determine the main limits to the sensor performance in terms of the maximum optical power of the pump and probe waves that can be used. One of the most important limitation in BOTDA sensors is the onset of non-local effects, which limits the maximum pump and probe waves power that can be injected in the fiber, and hence, the signal-to-noise ratio (SNR) at the receiver is worsen. The so-called non-local effects generate measurement errors, because the Brillouin spectra measured at distant locations depend on the interaction at previous positions in the fiber. In this research line, we have examined the effects caused by the limited extinction ratio (ER) of the pump pulse, finding that, among other impairments, it leads to the onset of a new non-local effect originated in the depletion of the pedestal of the pump wave. In addition, it has been found that the pedestal deformation caused by the transient response of erbium-doped fiber amplifiers, which are typically deployed to amplify the pump pulse, also constrains the performance of the sensor. Another contribution is the study of the techniques presented in the literature to mitigate the impairments caused by second-order non-local effects, which cause a frequency-dependent spectral deformation of the pulse. The findings of this study show that these techniques are only applicable when the Brillouin frequency shift (BFS) of the fiber is uniform, which is hard to find in real applications. Lastly, another subject of study is the limitations of the pump and probe optical power in coded-pump wave BOTDA configurations. We have observed that, in addition to some known limitations, there are two important restrictions that have to be taken into account: the onset of non-local effects and the non-linear amplification of the probe wave, both generated by the successive gain induced by the multiple pulses of the coded-pump wave. As a consequence of the findings of these studies, BOTDA configurations intended to solve these limitations have also been proposed during the thesis work. A technique to mitigate the constraints induced by the limited ER of the pump pulse has been presented. This method is based on adding a dithering to the optical source used to generate the two waves involved in the BOTDA sensor, so that the optical wavelength of both signals is modulated. In this way, the Brillouin interaction between the pedestal and the probe wavefronts become uncorrelated, and hence, the influence of the pedestal is greatly reduced. Another contribution is a technique focused on completely overcome the onset of second-order non-local effects. This method is based on continuously tracking the BFS distribution of the fiber, which combined with the probe-dithering method, has allowed, to the best of our knowledge, to inject the highest demonstrated probe wave power in a BOTDA sensor to date. In addition, in order to improve the SNR of the sensor, a novel BOTDA sensor has been proposed. This analyzer combines mono-color cyclic coding and probe-dithering techniques, so that the impairments caused by a coded pump wave are reduced, and hence, it is possible to increase the optical power and consequently enhance the sensing distance range. Finally, a novel simplified BOTDA sensor has been presented, which relies on passive optical filtering of the spectral components generated in a single optical source. In this way, the sensor setup is simplified reducing the number of optical devices, and therefore, the cost of the sensor is also reduced. This BOTDA configuration has been shown to have a performance comparable to more complex setups., Nafarroako Unibertsitate Publikoari, ikertzaileak prestatzeko dirulaguntza, atzerriko egonaldia zein bestelako laguntza moten bidez; Espainiako Ekonomia eta Lehiakortasun Ministerioari, TEC2013-47264-C2-2-R eta TEC2016-76021-C2-1-R proiektuen bidez; Europako Eskualde Garapenerako Funtsari (FEDER funds)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contribution to the development of distributed fiber optic sensors based on the Brillouin and Rayleigh scattering effects

  • Mompó Roselló, Juan José
En esta tesis se presenta diferentes técnicas que contribuyen en la mejora de DOFS basados en dispersión Brillouin y Rayleigh. Todas estas técnicas han sido demostradas experimentalmente mostrando resultados prometedores. Con estas nuevas técnicas, los sensores BOTDA pueden llegar a medir más lejos y con más precisión. Además, las técnicas encaradas a mejorar las prestaciones basadas en dispersión Rayleigh coherente permiten mejorar la SNR de la señal, reducir el fading que afecta a la señal medida, así como incrementar notablemente la máxima amplitud de la perturbación que se puede medir., In summary, in this thesis different techniques to improve the performance DOFS based on Brillouin and Rayleigh scattering have been presented and experimentally demonstrated. These new techniques permit to increase the sensing range and accuracy of BOTDA measurements and to enhance the SNR and the fading tolerance of OTDR sensors., Financial support of three institutions: a) Public University of Navarre, b) fons FEDER, and c) Spanish Ministry of Economy and Competitiveness (project TEC2013-47264-C2-2-R)., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Development of advanced structures for optical fiber lasers and sensors

  • Rota Rodrigo, Sergio
Desde la irrupción de la fibra óptica en las telecomunicaciones, han surgido multitud de desarrollos basados en sus propiedades. Así, en las últimas décadas, la rápida evolución de los sistemas basados en fibra óptica, así como la aparición en el mercado de dispositivos como los amplificadores ópticos, los láseres de semiconductor de alta potencia, y otros elementos, ha hecho avanzar considerablemente la investigación en este campo. Además de la utilización de la fibra óptica en telecomunicaciones, han surgido nuevas aplicaciones, generando nuevas familias de dispositivos. Dos de ellas particularmente interesantes, son los láseres de fibra óptica y los sensores de fibra óptica. Ambas familias pueden combinarse de manera que sensores y redes de sensores de fibra óptica pueden interrogarse por medio de láseres de fibra óptica. En este marco de investigación se centra esta tesis, donde se han desarrollado estructuras avanzadas de fibra óptica para láseres y sensores. El objetivo ha sido mejorar las propiedades de los láseres de fibra, sensores y sus sistemas de monitorización, así como abordar los diferentes problemas que éstos presentan actualmente. Los retos encontrados, así como los objetivos de cada sistema, varían en función del tipo de sistema desarrollado. De esta forma, la primera parte de este trabajo ha sido dedicada al desarrollo de láseres de fibra óptica, buscando mejorar sus propiedades en términos de estabilidad, relación señal ruido, modos longitudinales, múltiples líneas de emisión y anchura de las mismas. Se han abordado diferentes tipos de configuraciones clásicas de láseres en anillo y de cavidad lineal. También se han realizado estudios de láseres de cavidad distribuida mediante dispersión Rayleigh (random). Estos láseres han suscitado gran interés en los últimos años dado que no presentan modos longitudinales. Por otro lado en el ámbito de la monitorización de sensores, se han desarrollado transductores ópticos basados en fibras micro-estructuradas, aprovechando las ventajas que éstas presentan en comparación con las fibras ópticas estándar. Finalmente se han desarrollado diferentes configuraciones de sistemas sensores con el objetivo de contribuir a la mejora de alguno de sus parámetros, como su alcance, capacidad de multiplexación, sensibilidad, rango dinámico y estabilidad de los sistemas sensores., Optical fiber technology as well as its rapidly evolution, has attracted the scientific community attention to develop lasers, fiber optic transducers and sensor networks. In this regard, the appearance in the last decades of commercial devices such as optical amplifiers, semiconductor high power lasers and others, has contributed to the rise of this technology. In this framework, a contribution to the improvement of the performance of fiber lasers and fiber optic sensors is presented in this PhD. work, taking into account their main merits and addressing their principal challenges. The challenges as well as the objectives addressed in each design vary depending on the application. In this way, the first part of the thesis has been dedicated to the development of optical fiber lasers. And it is focused on improving their properties in terms of stability, signal noise ratio, longitudinal modes, multiwavelength emission and bandwidth of the emission lines. Different classical configurations based on ring and linear cavity lasers have been addressed. Also, random cavity lasers, which have attracted great interest in recent years due to their longitudinal modeless behavior, have been studied. On the other hand, in the field of sensor monitoring, optical transducers based on micro-structured fibers have been developed, exploiting their advantages in comparison with standard optical fibers. Finally different optical sensor networks have been developed, whose main goal have been the improvement of features such as monitoring distance, multiplexing skill, sensitivity, dynamic range and stability., Este trabajo se ha llevado a cabo gracias a las aportaciones económicas recibidas de los siguientes organismos y proyectos: - Universidad Pública de Navarra mediante la ayuda de investigación predoctoral, la ayuda para movilidad y las ayudas complementarias a tesis doctorales. - Secretaria de Estado de Investigación, Desarrollo e Innovación, Ministerio de Economía y Competitividad de España a través del programa de Formación del Personal Investigador y asociado al proyecto de investigación TEC2010-20224-C02-01. - Proyecto de investigación TEC2013-47264-C2-2-R a través del Fondo Europeo de Desarrollo Regional (FEDER). - Acción Europea COST- TD1001: Novel and Reliable Optical Fibre Sensor Systems for Future Security and Safety Applications (OFSeSa) - Proyecto INTERREG SUDOE Project “ECOAL-MGT - Ecological Management of Coal Waste Piles, SOE3/P2/P714”. - Ministerio de Economía y Competitividad de España a través del Proyecto campus de excelencia-Iberus (Innocampus). - Grupo de investigación Comunicaciones Ópticas y Aplicaciones Electrónicas de la Universidad Pública de Navarra mediante la financiación de material y participación en congresos., Programa Oficial de Doctorado en Tecnologías de las Comunicaciones (RD 1393/2007), Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Development of new punctual optical fiber transducer for sensing

  • López Aldaba, Aitor
The international research community has been nurturing photonic technologies over the years, aiming to develop cost effective solutions for a number of applications. Optical fibers offer an efficient solution for sensing and communication fields. Fiber optic sensors present appealing characteristics that make them very attractive when compared with conventional electric sensors such as immunity to electromagnetic interferences, as well as unfavorable environments, small size, ability for multiplexing and remote sensing. Another important aspect when using optical fibers is the ability to simultaneously use them as sensors and communication channels. The primary motivation for this PhD work was the study and development of new structures based in photonic crystal fibers. The main idea was to take advantage of the know-how of our group in fiber-optic communications and photonic sensing, as well as the recent advances in the sensing area to develop new structures based on the platform of photonic crystal fibers., The work presented in this thesis was accomplished due to different financial supports, as well as co-work relationships inside of the university and outside during research times developed abroad. Due to the financial support obtained, thanks should be pay to: Spanish Government project TEC 2013-47264-C2-2-R; Innocampus and the INTERREG SUDOE Project “ECOAL-MGT-Ecological Management of Coal Waste Piles, SOE3/P2/P714”; As well as FEDER founds; Spanish Government project TEC 2016-76021-C2-1-R; Cost action MP1401;, Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contributions to the development of Brillouin distributed sensors for structural health monitoring

  • Mariñelarena Ollacarizqueta, Jon
The main objectives of this thesis is to contribute to the enhancement of the performance of distributed optical ber sensors (DOFS) based on stimulated Brillouin scattering (SBS) by analyzing their limitations and proposing solutions to overcome their current constraints. The dissertation has been focused on improving different aspects of dynamic and static Brillouin optical time-domain analysis (BOTDA) and Brillouin optical coherent-domain analysis (BOCDA) sensors. Moreover, this research work has tried to contribute to reduce the existing gap between the investigation of DOFS and their industrial applications, demonstrating the capability of these sensors to provide efficient and valuable measurements in real application scenarios. In particular, the objectives of this dissertation are: -Enhance the signal-to-noise ratio (SNR) constraints faced by of BOTDA sensors by proposing alternative setups or post-processing solutions to achieve better performance. -Analyze and study the dynamic self-heterodyne detection BOTDA sensor recently presented by our research group to try to improve its performance by proposing solutions to their constraints and alternative setups. -Research on the limitations of a particular single-ended access BOCDA sensor setup with the aim of enhancing its performance. -Design, develop and implement novel measuring systems to deploy the investigated DOFS in real applications and demonstrate their capabilities., Tesis financiada por la Universidad Pública de Navarra a través del programa de ayudas para la formación de personal investigador y ayudas a la movilidad; Ministerio de Economía y Competitividad a través de los proyectos TEC2013-47264-C2-2-R y TEC2016-76021-C2-1-R; y Gobierno de Navarra-Departamento de Desarrollo Económico por los proyectos I-SEN 0011-1365-2016-00069 y WINSOLAR 0011-1365-2017-000122., Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011), Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Tesis doctoral (DoctoralThesis)

Contribution to the development of new photonic systems for fiber optic sensing applications

  • Bravo Acha, Mikel
En este trabajo de doctorado se presentan nuevos sistemas y subsistemas de sensores de fibra óptica. Así, se proponen y desarrollan nuevas técnicas, componentes y tecnologías basadas en láseres de fibra con espejos distribuidos (random), fibras de cristal fotónico, estructuras de luz lenta, multiplexores de inserción y extracción (add and drop), conmutadores tele-alimentados por luz, reflectometría óptica tanto en el dominio del tiempo como de la frecuencia o filtros ópticos reconfigurables. También se han demostrado nuevas aplicaciones para estructuras de sensores tradicionales y técnicas de medida ya conocidas. Todas ellas dirigidas a la mejora del funcionamiento de los actuales transductores, redes de sensores y aplicaciones de monitorización de salud estructural. De este modo, y en primer lugar, se han desarrollado nuevos transductores puntuales. En concreto, dos sensores interferométricos basados en fibras de cristal fotónico y otro basado en una estructura resonante en anillo. También se han realizado diferentes redes de sensores utilizando OTDRs comerciales. Por un lado, se han multiplexado diferentes sensores utilizando una red en forma de bus y, por el otro, se ha interrogado de manera remota un sensor FLM/LPG a una distancia de 253 km sin necesidad de amplificación. Se han estudiado láseres basados en efecto de realimentación distribuida random (RDFB) para su uso en interrogación de sensores. Para ello, se han demostrado dos nuevos láseres multi-longitud de onda y también, por primera vez, se ha modulado un laser random. Después, se han demostrado experimentalmente varias redes de sensores de fibra óptica teniendo en cuenta los principales desafíos que estas presentan: multiplexar varios sensores en una misma red y permitir su monitorización de manera remota. En primer lugar, se han multiplexado sensores basados en la modulación de la intensidad óptica utilizando técnicas de multiplexación en dominio del tiempo. En segundo lugar, se han multiplexado sensores basados en fibras de cristal fotónico. En tercer lugar, se presentan tres nuevos métodos para la medida remota de sensores. Por último, se incluye la demostración de un conmutador de fibra óptica tele-alimentado a través de luz. Éste se utiliza en tres redes diferentes para añadir robustez e incrementar la versatilidad en la multiplexación. Finalmente, se han realizado tres pruebas de campo para aplicaciones de monitorización de salud estructural., In this PhD work, different new photonic systems and subsystems for fiber optic sensing are presented. The aim of this thesis has been to contribute to the fiber optic sensors field using modern techniques, components and technologies such as random fiber lasers, photonic crystal fibers, slow light structures, add and drop multiplexers, powered by light switches, optical frequency and time domain reflectometry or reconfigurable optical filters, among others. New applications of traditional sensing structures or techniques have been also demonstrated. All of them focused on improving the performance of current sensors transducers, multiplexing networks and structural health monitoring applications. Thus, new point transducers have been developed: two of them are interferometric sensors based on photonic crystal fibers; and another one is based on a fiber ring resonator structure. Fiber optic sensor networks using commercial OTDRs have been also explored. On the one hand, different sensors have been successfully multiplexed in the same bus network. And, on the other hand, a FLM/LPG sensor was remotely interrogated at a distance of 253 km without using amplification. Random distributed feedback (RDFB) lasers have been explored for sensors interrogation. Two multi-wavelength Raman fiber lasers suitable for sensors interrogation have been demonstrated. Also, a random fiber laser has been internally modulated for the first time. Then, some experimental demonstrations of fiber optic sensors networks have been carried out taking into account the principal challenges they pose: multiplexing a number of optical sensors in a single networks, and enabling the possibility of remote sensing. Firstly, intensity sensors using TDM technology have been multiplexed. Secondly, PCF sensors have been successfully multiplexed. Thirdly, three new approaches to enable remote sensing are presented. Finally, a remote powered by light fiber optic switch have been included in three networks in order to add robustness and multiplexing versatility., Este trabajo se ha llevado a cabo gracias a las aportaciones económicas recibidas de los siguientes organismos, entre otros: - Secretaría de Estado de Investigación, Desarrollo e Innovación, Ministerio de Economía y Competitividad de España a través del programa de Formación del Personal Investigador y asociado al proyecto de investigación TEC2010-20224-C02-01. - Universidad Pública de Navarra mediante las ayudas a tesis doctorares. - Acción Europea COST- TD1001: Novel and Reliable Optical Fibre Sensor Systems for Future Security and Safety Applications (OFSeSa) - También se ha recibido financiación del Proyecto de Investigación de la Secretaría de Estado de Investigación, Desarrollo e Innovación, Ministerio de Economía y Competitividad de España TEC2013-47264-C2-2-R, de Innocampus, del Proyecto Europeo SUDOE-ECOAL-Intereg Project ECOAL-MGT y de los Fondos FEDER., Programa Oficial de Doctorado en Tecnologías de las Comunicaciones (RD 1393/2007), Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007)