Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Repisalud
Publication Artículo científico (JournalArticle)

Clinical characteristics and determinants of the phenotype in TMEM43 arrhythmogenic right ventricular cardiomyopathy type 5.

  • Domínguez, Fernando
  • Zorio, Esther
  • Jimenez-Jaimez, Juan
  • Salguero-Bodes, Rafael
  • Zwart, Robert
  • Gonzalez-Lopez, Esther
  • Molina, Pilar
  • Bermúdez-Jiménez, Francisco
  • Delgado, Juan F
  • Braza-Boïls, Aitana
  • Bornstein, Belen
  • Toquero, Jorge
  • Segovia, Javier
  • Van Tintelen, J Peter
  • Lara-Pezzi, Enrique
  • García-Pavía, Pablo
Arrhythmogenic right ventricular cardiomyopathy type V (ARVC-5) is the most aggressive heterozygous form of ARVC. It is predominantly caused by a fully penetrant mutation (p.S358L) in the nondesmosomal gene TMEM43-endemic to Newfoundland, Canada. To date, all familial cases reported worldwide share a common ancestral haplotype. It is unknown whether the p.S358L mutation by itself causes ARVC-5 or whether the disease is influenced by genetic or environmental factors. The purpose of this study was to examine the phenotype, clinical course, and the impact of exercise on patients with p.S358L ARVC-5 without the Newfoundland genetic background. We studied 62 affected individuals and 73 noncarriers from 3 TMEM43-p.S358L Spanish families. The impact of physical activity on the phenotype was also evaluated. Haplotype analysis revealed that the 3 Spanish families were unrelated to patients with ARVC-5 with the Newfoundland genetic background. Two families shared 10 microsatellite markers in a 4.9 cM region surrounding TMEM43; the third family had a distinct haplotype. The affected individuals showed a 38.7% incidence of sudden cardiac death, which was higher in men. Left ventricular involvement was common, with 40% of mutation carriers showing a left ventricular ejection fraction of <50%. Compared with noncarriers, the R-wave voltage in lead V3 was lower (3.2 ± 2.8 mV vs 7.5 ± 3.6 mV; P < .001) and QRS complex in right precordial leads wider (104.7 ± 24.0 ms vs 88.2 ± 7.7 ms; P = .001). A history of vigorous exercise showed a trend toward more ventricular arrhythmias only in women (P = .053). ARVC-5 is associated with a high risk of sudden cardiac death and characteristic clinical and electrocardiographic features irrespective of geographical origin and genetic background. Our data suggest that, as in desmosomal ARVC, vigorous physical activity could aggravate the phenotype of TMEM43 mutation carriers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Application of the Zero-Order Reaction Rate Model and Transition State Theory to predict porous Ti6Al4V bending strength

  • Reig Cerdá, Lucía
  • Calero, José Antonio
  • Ortiz Rosales, José Luis
  • Amigó, Vicente|||0000-0002-2107-0273
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
Porous T16Al4V samples were produced by microsphere sintering. The Zero-Order Reaction Rate Model and Transition State Theory were used to model the sintering process and to estimate the bending strength of the porous samples developed. The evolution of the surface area during the sintering process was used to obtain sintering parameters (sintering constant, activation energy, frequency factor, constant of activation and Gibbs energy of activation). These were then correlated with the bending strength in order to obtain a simple model with which to estimate the evolution of the bending strength of the samples when the sintering temperature and time are modified: sigma(y) = P + B [In (T . t) - R.T./Delta G(g)]. Although the sintering parameters were obtained only for the microsphere sizes analysed here, the strength of intermediate sizes could easily be estimated following this model. (c) 2012 Elsevier B.V. All rights reserved., The authors are grateful to the Spanish Ministerio de Ciencia e Innovacion for supporting this study through project PET2008_0158_02. The translation of this paper was funded by the Universidad Politecnica de Valencia and the Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Caracterización mecánica de aleaciones porosas, base Ti, producidas mediante la técnica de sinterización con espaciador, Mechanical characterization of porous Ti base alloys produced by sintering space-holder method

  • Tojal Domenech, Concepcion
  • Devaud, Julien
  • Calero, Jose Antonio
  • Amigó, Vicente|||0000-0002-2107-0273
[ES] La búsqueda de materiales adecuados para su uso como implante implica una mayor investigación sobre los biomateriales, como lo son el titanio y sus aleaciones. Respecto a sus propiedades mecánicas, se debe garantizar una resistencia mecánica suficiente como para soportar cargas en uso, al igual que su rigidez ha de ser parecida a la del hueso humano. En el presente trabajo se miden diferentes propiedades mecánicas de materiales porosos de titanio y de la aleación Ti6Al4V, producidos por vía pulvimetalúrgica mediante sinterización con espaciador. Los resultados muestran la relación entre la porosidad y las propiedades mecánicas, indicando los casos en los que se presenta un compromiso entre la rigidez y la resistencia mecánica., [EN] The search of suitable materials for use as an implant involves more research of biomaterials, like titanium and its alloys. Regarding their mechanical properties, it must be guaranteed mechanical strength to support loads in use, as well as its stiffness must be similar to the bone. In this paper it have been measured several mechanical properties of porous titanium and Ti6Al4V alloy, produced by sintering powder metallurgy with space-holder method. The results show the relationship between porosity and mechanical properties and it is indicated in which cases it is presented a compromise between the stiffness and mechanical strength., Los autores agradecen al área de Ciencia de Materiales e Ingeniería Metalúrgica de la Universidad de Sevilla la ayuda prestada en el cálculo de la rigidez por ultrasonidos. Igualmente, los autores desean agradecer la financiación obtenida por el Ministerio de Ciencia e Innovación (proyecto PET2008_0158_02) y a la beca Grisolia /2009/040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stiffness variation of porous titanium developed using space holder method

  • Reig Cerdá, Lucía
  • Calero, José Antonio
  • Amigó, Vicente|||0000-0002-2107-0273
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
The excellent properties of Ti have resulted in its generalised use for bone implants. However, Ti is very stiff in comparison with human cortical bone, and this creates problems of bone weakening and loosening of the implant. This article discusses the mechanical properties (flexural and compressive strength, and stiffness) of porous Ti-6Al-4V specimens developed using the space holder method. These properties are examined relative to the production process parameters: compacting pressure and sintering time, as well as temperature, and the addition of spacer and its particle size. It is seen that when spacer is added, compressive strength decreases with the application of compacting pressure and that these are the most influential parameters. The developed pieces show a closed and unconnected porosity. Small additions of spacer (25 vol.-%) reduce stiffness to around half of that shown by the solid material, and the resulting pieces are strong enough to be used as bone substitute. © 2011 Institute of Materials, Minerals and Mining., The authors wish to thank the Spanish Ministry of Science and Innovation for the support received under project no. PET2008_0158_02. The translation of this article was funded by the Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Processing of Ti Scaffolds by Sintering with Different Spacers

  • Tojal Domenech, Concepcion
  • Candel Bou, Juan José
  • Devesa Albeza, Francisco
  • Amigó, Vicente|||0000-0002-2107-0273
Titanium is a material used in biomedicine for osseous implants due to their low density and biocompatibility. Its use in this field is limited by the lack of similarity of their stiffness with the stiffness of bones. In order to reduce this difference, powder metallurgy offers ways to develop porous materials with a reduced stiffness. The main objective of this work is to develop titanium scaffolds by space-holder technique, concretely with using two different spacers: Ammonium bicarbonate and sodium chloride. It has been studied the best way for remove spacer of green compacts, which have been sintered in high vacuum. Materials obtained by using of two spacers, have been analyzed in order to value different results in porosity, microstructural and mechanical properties. The stiffness of new materials was obtained by testing of three points in bending. This research shows that the manufacturing method of porous materials for bone replacement using space holder technique with ammonium bicarbonate or sodium chloride, allows obtained samples with slightly difference in physical, microstructural and mechanical properties., The authors acknowledge the economical support from Spanish “Ministerio de Ciencia y Tecnología” (project PET2008_0158_02) and enterprise of sintered metal parts “AMES” form Barcelona (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Caracterización mecánica de aleaciones Ti-Nb mediante ensayos de flexión biaxial, Mechanical characterization of Ti-Nb alloys by ball on three balls test

  • Benavente Martínez, Esther
  • Devesa, F.
  • Amigó, Vicente|||0000-0002-2107-0273
[EN] Nowadays titanium and titanium alloys are increasingly being used in the industry. Particularly ß-Ti alloys that stand out for having great strength properties and low elastic modulus compared to Ti c.p. or Ti-6Al-4V. Among Ti alloys, Ti-Nb alloys with high contents of alloying elements are widely used. In this work Ti-Nb alloys have been obtained using conventional powder metallurgy. It has been studied the evolution of properties of these alloys as a function of the percentage of niobium. It can be noted the ball on three balls test used in order to characterize the samples., [ES] En la actualidad, cada vez, son más importantes en la industria las aleaciones de titanio. En especial las aleaciones tipo-ß, que destacan por tener buenas propiedades resistentes y bajos módulos elásticos, en comparación con el Ti c.p. o el Ti-6Al-4V. Dentro de estas aleaciones cabe destacar las Ti-Nb con altos contenidos en elementos aleantes. En este trabajo se han obtenido, mediante pulvimetalurgia convencional, una serie de aleaciones Ti-Nb, en el rango del 20-40 % de niobio. Se ha obtenido la evolución de las propiedades de dichas aleaciones en función del porcentaje de niobio, mediante la utilización del ensayo de flexión biaxial con tres apoyos (three ball test), Los autores agradecen al Ministerio de Ciencia e Innovación por la financiación de esta investigación a través del proyecto TRACE PET2008_0158_02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Collecting and Delivering Fattened Pigs to the Abattoir

  • Plà-Aragonés, Lluis Miquel
  • Bao, Yun
  • Llagostera, Pol
  • Panadero, Javier
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Simple Summary This article discusses how to plan the transport of fattened pigs from farms to the abattoir efficiently when the farms are coordinated with the abattoir operation. In contrast to the papers published to date that have been concerned with the farmer's profit, this paper adopts the slaughterhouse perspective. Coordination with growers should help to better plan the collection of pigs by establishing the best routes for the trucks to ensure the optimal functioning of the abattoir. Starting from a real scenario, the study delves into a complex Team Orienteering Problem, taking into account factors such as stochastic production and maximum truck workload. The paper adopts the PJS heuristic and compares it with exact methods, revealing the computational infeasibility of the latter. Through scenario analysis, the study unveils insights into practical solutions, highlighting a positive relationship between the exploration of alternative routes, the number of trips, transport costs, and maximum reward. In particular, greater variability in the number of pigs to be collected presents opportunities for a more efficient mix of loads, especially if one truck can visit at least one more farm. These results offer valuable insights for optimizing the pig transport logistics, potentially improving the profitability and sustainability.Abstract In the context of pig farming, this paper addresses the optimization problem of collecting fattened pigs from farms to deliver them to the abattoir. Assuming that the pig sector is organized as a competitive supply chain with narrow profit margins, our aim is to apply analytics to cope with the uncertainty in production costs and revenues. Motivated by a real-life case, the paper analyzes a rich Team Orienteering Problem (TOP) with a homogeneous fleet, stochastic demands, and maximum workload. After describing the problem and reviewing the related literature, we introduce the PJS heuristic. Our approach is first compared with exact methods, which are revealed as computationally unfeasible. Later, a scenario analysis based on a real instance was performed to gain insight into the practical aspects. Our findings demonstrate a positive correlation between the number of alternative routes explored, the number of trips, the transportation cost, and the maximum reward. Regarding the variability in the number of pigs to collect, when a truck can visit more than one farm, better solutions can be found with higher variability since the load can be combined more efficiently., This research was partially funded by CYTED program, grant number 524RT0158, and the Ministerio de Ciencia e Innovación through project AI4PORK, project number TED2021-130829B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of porous Ti6Al4V samples by microsphere sintering

  • Reig Cerdá, Lucía
  • Calero Martinez, Jose Antonio
  • Amigó, Vicente|||0000-0002-2107-0273
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
Two differently sized microspheres were sintered at 1300° C and 1400° C from 2 to 8 h in stoneware, alumina, yttria and zirconia moulds. Selecting the appropriate material to be used as a mould remains a critical issue given titanium's high reactivity at elevated temperatures. Optimum mechanical properties were obtained when sintering the smallest microspheres in yttria-coated moulds. Stiffness of the samples was lower than 40% of that of the bulk solid material, which comes closer to that of human cortical bone. Open and interconnected porosity was observed in all the specimens. © 2011 Elsevier B.V. All rights reserved., The translation of this paper was funded by the Polytechnic University of Valencia and the Universitat Jaume I.