Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

In-line quantitative estimation of ammonium polyphosphate flame retardant in polyolefins via industrial hyperspectral imaging system and machine learning

  • Amariei , Georgiana|||0000-0002-5412-6325
  • Henriksen, Martin Lahn
  • Klarskov, Pernille
  • Hinge, Mogens
7 p., Due to developments in European legislation, several halogenated flame retardants are banned due to their toxicity, and the use of phosphor-based flame retardants in plastics is increasing. A revision of ammonium polyphosphate (APP) flame retardant revealed that it is an eye irritant and toxic, thus posing a health issue. Hence APP identification is needed for enabling safe recycling of plastic waste streams. Herein an industrial inline method for quantitative estimation of APP in low density polyethylene (LDPE) and polypropylene (PP) is demonstrated, by using an industrial hyperspectral imaging system (955 to 1700 nm) and principal component analysis (PCA). Spectra of plastic samples with varying concentrations of APP were applied to build and calibrate a quantitative determination method. PCA and band area ratios (of selected bands) were made and fitted with continuous functions for concentration determination. The plastic samples were characterised by elemental analysis, attenuated total reflection, differential scanning calorimetry, and thermogravimetric analysis. The PCA model outperforms the band area ratio model and predicts APP concentrations between 24.3 and 1.5 wt% in LDPE (R2 = 0.98) and 20.0 and 1.7 wt% in PP (R2 = 0.97). Unknown samples with APP ranging from 23.7 to 2.7 wt% in LDPE and from 18.6 to 2.3 wt% in PP were predicted and correlated to the actual concentrations. The proposed approach is valuable for the plastic recyclers and waste management industries where inline concentration determination of flame retardants is key., Innovation Fond Denmark
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Quantification of aluminium trihydrate flame retardant in polyolefins via in-line hyperspectral imaging and machine learning for safe sorting

  • Amariei , Georgiana|||0000-0002-5412-6325
  • Henriksen, Martin Lahn
  • Klarskov, Pernille
  • Hinge, Mogens
8 p., The extensive use of aluminium trihydrate (ATH) flame retardant in plastics poses challenges and hazards in plastic waste recycling, thus it is crucial to accurately identify ATH. This study demonstrates the effectiveness of an industrial in-line shortwave infrared (SWIR) hyperspectral imaging system and principal component analysis (PCA) for detecting and quantifying ATH in low-density polyethylene (LDPE) and polypropylene (PP). The samples were characterized by elemental analysis, ATR-FTIR, DSC, and TGA. A quantitative estimation model was developed by analysing spectra with varying ATH concentrations. PCA and SWIR band area ratio were fitted to estimate the ATH concentration. The PCA model outperformed the SWIR band area ratio model and achieved good predictions between measured and predicted ATH concentrations ranging from 22.9 to 1.6 wt% (R2LDPE = 0.95) in LDPE and from 24.0 to 2.5 wt% in PP (R2PP = 0.94). The obtained in-line control tool is relevant to the recycling industries, enabling real-time assessment of additives., Innovation Fond Denmark