Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Mesocosm trials reveal the potential toxic risk of degrading bioplastics to marine life

  • Quade, Jakob
  • Lopez Ibañez, Sara
  • Beiras Garcia Sabell, Ricardo
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, If biodegradable plastics tackle the marine plastic pollution problem sufficiently remains questionable. To gain more insight in degradability, performance, and the impact of degradation on the toxicity, commercial bags made from two biodegradable plastics and one conventional plastic (PE) were exposed for 120 days in a mesocosm featuring benthic, pelagic, and littoral habitat simulations. Degradability was assessed as weight loss, and specimens were tested for toxicity using Paracentrotus lividus sea-urchin larvae after different exposure times. Both biodegradable bags showed degradation within 120 days, with the littoral simulation showing the highest and the pelagic simulation the lowest decay. Disregarding habitat, the home-compostable plastic showed higher marine degradation than the industrial-compostable material. The relevant initial toxicity of both biopolymers was lost within 7 days of exposure, pointing towards easily leachable chemical additives as its cause. Interestingly, littoral exposed specimens gained toxicity after 120 days, suggesting UV- induced modifications that increase biopolymer toxicity., Agencia Estatal de Investigación | Ref. PCI2020-112110, Ministerio de Universidades | Ref. FPU19/02280
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Evaluating the alterations of the estrogen-responsive genes in Cyprinodon variegatus larvae for biomonitoring the impacts of estrogenic endocrine disruptors (EEDs)

  • Moreno Abril, Sandra Isabel
  • Olmos Pin, Ana
  • MARTINEZ SCHöNEMANN, Alexandre
  • Bellot, Marina
  • Gómez Canela, Cristian
  • Beiras Garcia Sabell, Ricardo
Currently, endocrine disruptors (EDs) can be found in all the environmental compartments. To understand the effects of estrogenic EDs (EEDs), adults of Cyprinodon variegatus have been classically used as a marine model. However, it is during development that exposure to contaminants may generate permanent consequences. Thus, the aim of this study was to verify the effects produced by acute exposure to 17α-ethinylestradiol (EE2) in C. variegatus larvae. Quantitative PCR (qPCR) results revealed the induction of vtg and zp gene expression on exposure to 1000 ng/L EE2 and the induction of vtgc, zp2, zp3 and cyp19a2, and inhibition of vtgab, wap and cyp1a1 on exposure to 100 ng/L EE2. Lower concentrations inhibited the gene expression of vtgab and wap (50 ng/L), cyp1a1 (25 ng/L) and zp2 (12.5 ng/L). These alterations in gene expression allow us to affirm that larvae of C. variegatus are an efficient and sensitive model for biomonitoring EEDs., Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Assessment of toxicity and biodegradability of poly(vinyl alcohol)-based materials in marine water

  • Alonso Lopez, Olalla Cristina
  • Lopez Ibañez, Sara
  • Beiras Garcia Sabell, Ricardo
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Due to the continuous rise in conventional plastic production and the deficient management of plastic waste, industry is developing alternative plastic products made of biodegradable or biobased polymers. The challenge nowadays is to create a new product that combines the advantages of conventional plastics with environmentally friendly properties. This study focuses on the assessment of the potential impact that polyvinyl alcohol (PVA)-based polymers may have once they are released into the marine environment, in terms of biodegradation in seawater (assessed by the percentage of the Theoretical Oxygen Demand, or % ThOD, of each compound) and aquatic toxicity, according to the standard toxicity test using Paracentrotus lividus larvae. We have tested three different materials: two glycerol-containing PVA based ones, and another made from pure PVA. Biodegradation of PVA under marine conditions without an acclimated inoculum seems to be negligible, and it slightly improves when the polymer is combined with glycerol, with a 5.3 and 8.4% ThOD achieved after a period of 28 days. Toxicity of pure PVA was also negligible (<1 toxic units, TU), but slightly increases when the material included glycerol (2.2 and 2.3 TU). These results may contribute to a better assessment of the behavior of PVA-based polymers in marine environments. Given the low biodegradation rates obtained for the tested compounds, PVA polymers still require further study in order to develop materials that are truly degradable in real marine scenarios., Agencia Estatal de Investigación | Ref. PCI2020-112110, Ministerio de Universidades | Ref. FPU19/02280
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Understanding plastic degradation in the marine environment: a multi-tiered assessment, Comprendiendo la degradación del plástico en el medio marino: una evaluación a varios niveles, Comprendendo a degradación do plástico no medio mariño: unha avaliación a varios niveis

  • Lopez Ibañez, Sara
Year by year, the global plastic production has been increasing sharply, so much so that in 2018 it reached almost 360 million tonnes. Along with its growing abundance, some other factors such as their environmental persistence and chemical composition turn plastics into an environmental threat. Plastic pollution pose a threat especially to marine ecosystems, in which, since 50 years ago, this type of waste has been found. Although bigger plastics cause trouble, most of them are not even visible to the naked eye. These tiny particles are scattered all around the globe, but even so, their biological effect is barely known. This thesis project aims to analyze the degradation process (biodegradation and mechanical degradation) of plastic products made of conventional and biopolymers, as well as to test their ecotoxicological impact in model organisms through the process, always in ecologically relevant conditions, with a view to assess the environmental risk derived from the plastic release after use. This work will be based on standardized methods adapted specifically for the study of plastics in marine conditions. The tested materials will be commercial products and new polymers created in the framework of the projects Glaukos (European) and Risbioplas (national)., Año tras año, la producción mundial de plásticos ha aumentado hasta alcanzar, en 2018, casi 360 millones de toneladas. A su creciente abundancia se le suman otros factores que les convierten en una amenaza para el medio ambiente, principalmente su persistencia en el medio y su composición química. La contaminación por plásticos supone un peligro para los ecosistemas marinos, en los que, desde hace 50 años, se han estado encontrando residuos de este tipo. Aunque los residuos plásticos de gran tamaño son un gran problema, la mayor parte no son detectables a simple vista. Estos plásticos de pequeño tamaño están distribuidos por todo el mundo, pero el impacto que tienen sobre las comunidades biológicas es muy poco conocido. En este proyecto de tesis se pretende analizar el proceso de degradación (biodegradación y degradación mecánica) de productos plásticos, compuestos por polímeros convencionales y biopolímeros, así como evaluar su efecto toxicológico en organismos modelo a lo largo de este proceso, siempre en condiciones de exposición con relevancia ecológica, con el objetivo de valorar el riesgo ambiental derivado de su liberación tras su uso. El desarrollo de este trabajo se basará en métodos estandarizados homologados a nivel internacional adaptados específicamente para el estudio de plásticos en medio marino. Los materiales a testar consistirán tanto en productos comerciales adquiridos directamente del mercado, como nuevos materiales generados en el ámbito de los proyectos Glaukos (europeo) y Risbioplas (nacional)., Ano tras ano, a produción mundial de plásticos aumentou ata alcanzar, en 2018, case 360 millóns de toneladas. Á súa crecente abundancia súmanse outros factores que os converten nunha ameaza para o medio ambiente, principalmente a súa persistencia no ambiente e a súa composición química. En particular, a contaminación por plásticos supón un perigo para os ecosistemas mariños, nos que hai 50 anos que se atoparon residuos deste tipo. Aínda que os grandes residuos de plástico son un gran problema, a maioría non se detectan a simple vista. Estes plásticos de pequeno tamaño distribúense por todo o mundo, pero o impacto que teñen nas comunidades biolóxicas é moi pouco coñecido. Neste proxecto de tese preténdese analizar o proceso de degradación (biodegradación e degradación mecánica) de produtos plásticos, compostos por polímeros convencionais e biopolímeros, así como avaliar o seu efecto toxicolóxico en organismos modelo ao longo deste proceso, sempre en condicións de exposición con relevancia ecolóxica, co obxectivo de valorar o risco ambiental derivado da súa liberación tras o seu uso. O desenvolvemento deste traballo basearase en métodos estandarizados homologados a nivel internacional adaptados especificamente para o estudo de plásticos no medio mariño. Os materiais a testar consistirán tanto en produtos comerciais adquiridos directamente do mercado, como novos materiais xerados no ámbito dos proxectos Glaukos (europeo) e Risbioplas (nacional)., Agencia Estatal de Investigación | Ref. PCI2020-112110
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Ecotoxicological evaluation of sunscreens on marine plankton

  • González Muñoz, María Pilar
  • Vilas Da Fonseca, Alejandro
  • Beiras Garcia Sabell, Ricardo
In recent years, a large number of sunscreens have emerged to protect our skin. Most of them are made up of simple or compound aromatic structures, which can pose a threat to marine ecosystems. In order to understand their effects on the marine environment, different ecotoxicological bioassays were carried out using planktonic organisms from three phyla and two different trophic levels: larvae of the sea urchin Paracentrotus lividus, the copepod Acartia tonsa, and the microalga Tisochrysis lutea. The aim of these tests was to expose these organisms to leachates from eight sunscreen formulations. All of them showed a great variability in toxicity on the different plankton organisms. The highest toxicity level was found for cream number 4 when tested on sea urchin, exhibiting an EC50 = 122.4 mg/L. The toxicity of the UV filter 2-phenyl-5-benzimidazolesulfonic acid, exclusively present in that cream, was evaluated in sea urchin, where an EC10 = 699.6 mg/L was obtained under light exposure. According to our results, all tested creams become nontoxic to plankton upon 30,000-fold dilution in seawater; thus, only local effects are expected. This study highlights the need to understand the toxic effects generated by solar protection products, as well as their ingredients, on marine organisms., Ministerio de Ciencia e Innovación | Ref. PCI2020-112110(AEI: 10.13039/501100011033), European Commission | Ref. LABPLAS, H2020, n. 101003954, Xunta de Galicia | Ref. ED431C 2021/42
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Earthworm (Eisenia andrei)-mediated degradation of commercial compostable bags and potential toxic effects

  • Lima Da Gama Mendes , Luís André
  • Beiras Garcia Sabell, Ricardo
  • Domínguez Martín, Jose Jorge
The availability of compostable plastic bags has increased greatly in the past few years, as it is perceived that this type of bags will be degraded after disposal. However, there are some knowledge gaps regarding the potential effects on the soil ecosystems. We assessed the rate of degradation of samples of four different types of commercial compostable bags in vermicomposting systems with the earthworm species Eisenia andrei. We also evaluated the biological response of E. andrei (survival and reproduction) to microplastics (MPs) from fragments of the plastic bags (<2000 µm) and assessed seedling emergence in common garden cress (Lepidium sativum L.) exposed to micronized plastic (<250 µm) and the respective leachate, following OECD and ISO guidelines, respectively. The rate of degradation differed significantly depending on the type of plastic rather than the substrate in the vermicomposting system. This finding suggests that the degradation process is more dependent on the microbial community colonizing the different plastic types than on earthworm activity. Regarding the biological response of the soil system, L. sativum seedling emergence was not significantly affected; however, earthworm reproduction was affected, suggesting that although compostable, some of the formulations may potentially be toxic to soil fauna., Xunta de Galicia | Ref. ED431C 2022/07, IDI&CA Programme-funded PLASCOGEN project | Ref. IPL/2021/PLASCOGEN_ESTeSL, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2021-124265OB-100, Agencia Estatal de Investigación | Ref. TED2021-129437B-100
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Spent coffee grounds as a suitable alternative to standard soil in ecotoxicological tests

  • Lima Da Gama Mendes , Luís André
  • Domínguez Martín, Jose Jorge
Eisenia andrei is considered in OECD and ISO guidelines to be a suitable replacement for Eisenia fetida in ecotoxicological assays. This suggests that other alternative materials and methods could also be used in standard procedures for toxicity testing. The guidelines also favor using less time-consuming procedures and reducing costs and other limitations to ecotoxicological assessments. In recent years, spent coffee grounds (SCG) have been used to produce vermicompost and biochar and as an additive to organic fertilizers. In addition, the physicochemical characteristics of SCG indicate that the material is a suitable substrate for earthworms, with the organisms performing as well as in natural soil. In the present study, a battery of ecotoxicological tests was established with unwashed and washed SCG and a natural reference soil (LUFA 2.2). The test substrates were spiked with different concentrations of silver nitrate. Survival and reproduction of the earthworm E. andrei were assessed under different conditions, along with substrate basal respiration (SBR) as a proxy for microbial activity. Seedling emergence and the germination index of Lepidium sativum were also determined, following standard guidelines. Exposure to silver nitrate had similar effects on earthworm survival and reproduction, as the estimated effective concentrations (EC10 and EC50) in unwashed SCG and LUFA 2.2 overlapped. A hormetic effect was observed for SBR in LUFA 2.2 spiked with 12.8 mg/kg but not in unwashed SCG. Both SBR and root development were inhibited by similar concentrations of silver nitrate in washed SCG. The findings indicate that unwashed SCG could potentially be used as a substrate in E. andrei toxicity tests and support the eventual inclusion of this material in the standard guidelines., Agencia Estatal de Investigación | Ref. PID2021-124265OB-I00, Xunta de Galicia | Ref. ED431C 2022/07, Agencia Estatal de Investigación | Ref. TED2021-129437B-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

A practical tool for the assessment of polymer biodegradability in marine environments guides the development of truly biodegradable plastics

  • Beiras Garcia Sabell, Ricardo
  • Lopez Ibañez, Sara
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Environmental persistence is one of the few shortcomings of plastic materials. As a consequence, alternative plastics labeled as compostable are replacing polyolefins in some commercial applications, such as food bags and trash bags. A rapid, high-throughput, and environmentally relevant method to assess the potential biodegradability in marine conditions is used to assess these materials already on the market, as well as novel bio-based polymers still in development. By fitting experimental data to a non-linear logistic model, ultimate biodegradability can be calculated without regard for incubation time. Whereas the commercial products show negligible or very low marine biodegradability, one of the novel materials exceeds the 20% biodegradation threshold relative to fully marine biodegradable PHB after 28 days. In addition, the sensitivity of the method can be enhanced and its duration reduced, at the expense of labor-demanding preconditioning of the microbial inoculum, by increasing the bacterial density in the incubation vessels. In contrast, pre-exposure of the inoculum to plastic, either in laboratory or field conditions, does not enhance the performance of the test., Ministerio de Universidades | Ref. FPU19/02280, Ministerio de Ciencia e Innovación | Ref. PCI2020-112110
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

Host taxonomy determines the composition, structure, and diversity of the earthworm cast microbiome under homogenous feeding conditions

  • Aira Vieira, Manuel
  • Perez Losada, Marcos
  • Crandall, Keith A
  • Domínguez Martín, Jose Jorge
Host evolutionary history is a key factor shaping the earthworm cast microbiome, although its effect can be shadowed by the earthworm’s diet. To untangle dietary from taxon effects, we raised nine earthworm species on a uniform diet of cow manure and compared cast microbiome across species while controlling for diet. Our results showed that, under controlled laboratory conditions, earthworm microbiomes are species-specific, more diverse than that of the controlled diet, and mainly comprised of native bacteria (i.e. not acquired from the diet). Furthermore, diet has a medium to large convergence effect on microbiome composition since earthworms shared 16%–74% of their bacterial amplicon sequence variants (ASV). The interspecies core microbiome included 10 ASVs, while their intraspecies core microbiomes were larger and varied in ASV richness (24%–48%) and sequence abundance across earthworm species. This specificity in core microbiomes and variable degree of similarity in bacterial composition suggest that phylosymbiosis could determine earthworm microbiome assembly. However, lack of congruence between the earthworm phylogeny and the microbiome dendrogram suggests that a consistent diet fed over several generations may have weakened potential phylosymbiotic effects. Thus, cast microbiome assembly in earthworms seem to be the result of an interplay among host phylogeny and diet., Agencia Estatal de Investigación | Ref. PID2021-124265OB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Artículo científico (JournalArticle)

The bisphenol A metabolite MBP causes proteome alterations in male Cyprinodon variegatus fish characteristic of estrogenic endocrine disruption

  • MARTINEZ SCHöNEMANN, Alexandre
  • Moreno Abril, Sandra Isabel
  • Perez Diz, Angel Eduardo
  • Beiras Garcia Sabell, Ricardo
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The toxicological status of bisphenol A (BPA) is under strong debate. Whereas in vitro it is an agonist of the estrogen receptor with a potency ca. 105-fold lower than the natural female hormone estradiol, in vivo exposure causes only mild effects at concentration thresholds environmentally not relevant and inconsistent among species. By using a proteomic approach, shotgun liver proteome analysis, we show that 7-d exposure to 10 μg/L of the BPA metabolite, 4-methyl-2,4-bis(4-hydroxyphenyl)pent-1-ene (MBP), and not the same exposure to the parental molecule BPA, alters the liver proteome of male Cyprinodon variegatus fish. Different physiological and environmental conditions leading to biotransformation of BPA to MBP may partly explain the conflicting results so far reported for in vivo BPA exposures. The pattern of alteration induced by MBP is similar to that caused by estradiol, and indicative of estrogenic endocrine disruption. MBP enhanced ribosomal activity, protein synthesis and transport, with upregulation of 91% of the ribosome-related proteins, and 12 proteins whose expression is regulated by estrogen-responsive elements, including vitellogenin and zona pellucida. Whey acidic protein (WAP) was the protein most affected by MBP exposure (FC = 68). This result points at WAP as novel biomarker for xenoestrogens., Agencia Estatal de Investigación | Ref. PID2019-107611RB-I00, Xunta de Galicia | Ref. ED431C 2020/05, Xunta de Galicia | Ref. ED431C 2017/46, Xunta de Galicia | Ref. ED481A-2018/289
Investigo. Repositorio Institucional de la Universidade de Vigo
Publication Tesis doctoral (DoctoralThesis)

Effects of plastic chemical additives on the proteome of the marine fish model Cyprinodon variegatus, Efectos de aditivos químicos de los plásticos sobre el proteoma del pez marino modelo Cyprinodon variegatus, Efectos dos aditivos químicos dos plásticos no proteoma do modelo de peixe marino Cyprinodon variegatus

  • MARTINEZ SCHöNEMANN, Alexandre
An endocrine disruptor is defined as an exogenous substance or a merge of substances that change the endocrine system function and in consequence can produce adverse effects over the health of the organisms, progeny or their populations. Global plastic production is increasing exponentially, it reaching nowadays more than 200.000 MT/year. On this plastic composition it finds since a 30% weight from additives, which cause an endocrine disruption in a great variety of marine organisms. Because to the physiology and sexual reproduction plasticity of the teleost fish the additive effects can be very alarming. However, the most used fish models are from freshwater species, as zebra fish or medaka, and there is a little amount of marine fish studies about this topic. So, it is important to develop a marine fish model that allow the study in laboratory of the endocrine effects, study whit importance to the protection of the coastal marine ecosystems. Therefore, the main objective of these thesis is to develop this model to prove the plastic additives effects as disruptors of the endocrine system through proteomic and other omic tools., Un disruptor endocrino se define como una substancia o mezcla de sustancias exógenas que alteran la función del sistema endocrino y en consecuencia pueden causar efectos adversos sobre la salud de los organismos, su progenie o sus poblaciones. La producción mundial de plástico no cesa de aumentar exponencialmente, superando en la actualidad las 200.000 ton/año. En la composición de estos plásticos se encuentra hasta un 30% de su peso en aditivos, los cuales causan una disrupción endocrina en gran variedad de organismos marinos. Debido a la fisiología y plasticidad reproductiva de los peces teleósteos los efectos de estos aditivos pueden llegar a ser muy acusados. Sin embargo, los modelos biológicos más utilizados, como el pez zebra o la medaca son especies dulceacuícolas, habiendo pocos trabajos encaminados a estudiar esta temática en peces marinos. Así, es preciso desarrollar un modelo de pez marino que permita el estudio en laboratorio de los efectos endocrinos con relevancia para la protección de los ecosistemas marinos costeros. Por tanto, se establece el desarrollo de este modelo como objetivo principal de la tesis de doctorado cuya finalidad es comprobar los efectos de los aditivos del plástico como disruptores del sistema endocrino mediante la utilización de proteómica y otras herramientas omicas., Un disruptor endócrino defínese como unha substancia ou mestura de substancias esóxenas que alteran a función do sistema endócrino e en consecuencia pode causar efectos adversos sobre a saúde nun organismo, a súa proxenie ou as súas poboacións. A produción mundial de plástico non cesa de aumentar exponencialmente, superando na actualidade as 200.000 Ton/ano . Na composición destes plásticos atópase ata un 30% do seu peso en aditivos, os cales causan unha disrupción endocrina en gran variedade de organismos mariños. Debido a fisioloxía e plasticidade reprodutiva dos peixes teleósteos os efectos destes aditivos poden chegar a ser moi acusados. Sen embargo, os modelos biolóxicos máis usados como o peixe cebra ou o medaka son especies doceacuícolas, e son escasos os traballos encamiñados a estudar esta temática en peixes mariños. É por tanto preciso o desenvolvemento dun modelo de peixe mariño que permita o estudo en laboratorio dos efectos endócrinos con relevancia para a protección dos ecosistemas mariños costeiros. Así, establecese o desenvolvemento deste modelo como obxectivo principal da tese de doutoramento cuxa finalidade é comprobar o efecto dos aditivos de plásticos como disruptores do sistema endocrino mediante o emprego de proteómica e outras ferramentas ómicas., Agencia Estatal de Investigación | Ref. PID2019–107611RB-I00, Xunta de Galicia | Ref. ED431C 2020/05, Xunta de Galicia | Ref. ED431C 2017/46, Xunta de Galicia | Ref. ED481A 2018/289
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Green Approach for the Automatic Quantitative Analysis of Additives in Plastic Samples Using In-Tube Extraction Dynamic Headspace Sampling Technique Coupled to GC-MS/MS

  • Concha-Graña, Estefanía
  • Moscoso Pérez, Carmen María
  • Fernández-González, V.
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] Background: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination. Results: Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 μg g−1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer. Significance: This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples., This work was supported by the Spanish Inter-Ministerial Science and Technology Commission and by the European Union through the European Regional Development Fund (ERDF) under the JPI_Oceans 2019 MicroplastiX (PCI2020-112145), the Spanish Ministry of Science and Innovation through the RISBIOPLAS project (CHEMPLAS, PID2019-108857RB-C3/AEI/10.13039/501100011033), and European Union H2020 under the LABPLAS project (Grant H2020- 101003954). Financial support is also acknowledged from the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) potentially co-financed by ERDF in the frame of the operative Program of Galicia 2021–2024 (reference: ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Weathering-Independent Differentiation of Microplastic Polymers by Reflectance IR Spectrometry and Pattern Recognition

  • Ferreiro, Borja
  • Andrade-Garda, José Manuel
  • Paz-Quintáns, Carlota
  • Fernández-González, V.
  • López-Mahía, P.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The presence and effects of microplastics in the environment is being continuously studied, so the need for a reliable approach to ascertain the polymer/s constituting them has increased. To characterize them, infrared (IR) spectrometry is commonly applied, either reflectance or attenuated total reflectance (ATR). A common problem when considering field samples is their weathering and biofouling, which modify their spectra. Hence, relying on spectral matching between the unknown spectrum and spectral databases is largely defective. In this paper, the use of IR spectra combined with pattern recognition techniques (principal components analysis, classification and regression trees and support vector classification) is explored first time to identify a collection of typical polymers regardless of their ageing. Results show that it is possible to identify them using a reduced suite of spectral wavenumbers with coherent chemical meaning. The models were validated using two datasets containing artificially weathered polymers and field samples., This work was supported by the EU Horizon2020-JPI Oceans Project “LAnd-Based Solutions for PLAstics in the Sea” (Grant No. 101003954, LABPLAS), and the “Integrated approach on the fate of MicroPlastics towards healthy marine ecosystems” (MicroplastiX, Grant PCI2020-112145, supported by the JPI Oceans Program and by Spanish Government, MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU/PRTR program”). The Galician Government (‘Xunta of Galicia’) is acknowledged for its support to the QANAP group (Programa de Consolidación y Estructuración de Unidades de Investigación Competitiva. Ref. ED431C 2021/56). Funding for open Access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Reliable Method to Determine Airborne Microplastics Using Quantum Cascade Laser Infrared Spectrometry

  • López-Rosales, Adrián
  • Ferreiro, Borja
  • Andrade-Garda, José Manuel
  • Fernández-Amado, María
  • González-Pleiter, Miguel
  • López-Mahía, P.
  • Rosal, Roberto
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The number of studies dealing with airborne microplastics (MPs) is increasing but sampling and sample treatment are not standardized, yet. Here, a fast and reliable method to characterize MPs is presented. It involves the study of two passive sampling devices to collect atmospheric bulk deposition (wet and dry deposition) and three digestion methods (two alkaline-oxidative and an oxidative) to treat the samples. The alkaline-oxidative method based on KOH and NaClO was selected for a mild organic matrix digestion. In addition, some operational parameters of a high-throughput quantum cascade laser-based infrared device (LDIR) were optimized: an effective automatic tiered approach to differentiate fibres from particles (>90 % success in validation) and a criterion to establish positive matches when comparing an unknown spectrum against the spectral database (proposed match index > 0.85). The procedural analytical recoveries were very good for particles (82–90 %) and slightly lower for fibres (62–73 %). Finally, the amount and type of MPs deposited at a sub-urban area NW Spain were evaluated. Most common polymers were Polyethylene (PE), Polypropylene (PP) and Polyethylene terephthalate (PET). The deposition rates ranged 98–1220 MP/m2/day, ca. 1.7 % of the total collected particles. More than 50 % of the total MPs deposited were in the 20–50 μm size range, whereas fibres were mostly in the 50–500 μm size range., This work constitutes a part of the LABPLAS project (Grant Agreement No. 101003954), supported by the EU H2020 program. The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitivas’ of the Galician Government (Xunta de Galicia) is acknowledged (Grant ED431C 2021/56). Ministerio de Ciencia, Innovación y Universidades is also acknowledged (PTA2017-13607-MFA and PTA 2018-016005-MPEP). The authors acknowledge the support provided by the Spanish Network of Plastics in the Environment, EnviroPlaNet (www.enviroplanet.net, RED2018-102345-T Ministerio de Ciencia, Innovación y Universidades). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Microplastic Mass Estimation Using Two-Dimensional Chemical Images from Quantum-Cascade Laser-Based Infrared Spectrometers

  • Ferreiro, Borja
  • Andrade-Garda, José Manuel
  • López-Rosales, Adrián
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Modern spectroscopic chemical imaging techniques perform nondestructive, relatively fast sample analysis to count and chemically characterize individual particles. However, they do not offer information on particle mass, a relevant parameter for several disciplines, like toxicology. This work strives to estimate the mass of plastic particles using a tiered sequence of steps and models that employ bidimensional parameters (height, width, perimeter, area) reported by state-of-the-art tunable quantum-cascade laser-based infrared imaging spectroscopy. A hybrid model that does not need calibration steps for its routine application is proposed for the first time. The shape of each particle is assessed individually, rather than setting them initially. Fibers are modeled as cylinders using an equivalent cylinder concept, while fragments are approximated to either parallelepipeds or spheroids, based on their 2D circularity. Previously published models were tested, modified, and hybridized to assess the mass of known sets of plastic particles whose size ranged from 20 to 1500 μm and whose total weight ranged from 190 to 9400 μg. The hybrid approach estimated the mass of exemplary samples with relative errors lower than 20% (a satisfactory level for these estimations) and worked well in size and weight ranges barely tested before. An Excel-based spreadsheet (NOMME, Number Of Microplastics and their Mass Estimation) was developed to streamline the application of the hybrid model, This work constitutes a part of the LABPLAS project (Grant Agreement No. 101003954), supported by the EU H2020 program. Funding for the SplashMare project (PID2022138421OB-C21, MICIU/AEI/10.13039/501100011033 and by FEDER, UE) is also acknowledged. The Program “Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is acknowledged (Grant ED431C 2025/57). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2025/57
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Supervised Classification Combined with Genetic Algorithm Variable Selection for a Fast Identification of Polymeric Microdebris Using Infrared Reflectance

  • Ferreiro, Borja
  • Leardi, Riccardo
  • Farinini, Emanuele
  • Andrade-Garda, José Manuel
[Abstract] Pollution caused by plastics and, in particular, microplastics has become a source of environmental concern for Society. Their ubiquity, with millions of tons of plastic debris spilled in both land and sea, requires efficient technological improvements in the ways residues are collected, handled, characterized and recycled. For reliable decision-making, dependable chemical information is essential to assess both the nature of the plastics found in the environment and their fate. In this work an efficient method to identify the polymeric composition of microplastic fragments is proposed. It combines infrared reflectance spectra and chemometric methods. A breakthrough result is that the models include polymers weathered under both dry (shoreline) and submerged (in sea water) conditions and, hence, they are very promising as a starting point for eventual practical applications. In addition, no spectral processing is required after the initial measurement., This work was supported by the EU Horizon2020-JPI Oceans Project “LAnd-Based Solutions for PLAstics in the Sea” (LABPLAS, Grant No. 101003954), and the “Integrated approach on the fate of MicroPlastics towards healthy marine ecosystems” (MicroplastiX, Grant PCI2020-112145), supported by the JPI Oceans Program and by Spanish Government, MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU/PRTR program”. The Galician Government (“Xunta of Galicia”) is acknowledged for its support to the QANAP group (Programa de Consolidación y Estructuración de Unidades de Investigación Competitiva. Ref. ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Development of an Analytical Procedure to Analyze Microplastics in Edible Macroalgae Using an Enzymatic-Oxidative Digestion

  • López-Rosales, Adrián
  • Andrade-Garda, José Manuel
  • López-Mahía, P.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Besides being food and a refuge to marine species, macroalgae are a powerful and renewable economic resource. However, they may introduce microplastics (MPs) in the trophic chain. We developed a reliable analytical method to characterize and quantify MPs in common and edible macroalgae. Several digestion methods and filters, along with various measurement options, were studied. A new enzymatic-oxidative protocol with a unique final filtration was selected and validated with a mixture of 5 commercial macroalgae (Undaria pinnatifida spp, Porphyra spp, Ulva spp, Laminaria ochroleuca and Himanthalia elongate). Further, it was shown that washing the macroalgae to release MPs is suboptimal and the potential adhesion of MPs to macroalgae was evaluated. A filter subsampling strategy that scans 33.64 % of its surface reduced the time required to characterize <70 μm particles and fibres directly on the 47 mm diameter filter using an IR microscope (1 sample/day)., This work is a part of the projects MicroplastiX (Grant PCI2020-112145, JPI Oceans Project supported by MCIN/AEI/10.13039/501100011033 and by the European Union “Next Generation EU/PRTR”) and LAnd-Based solutions for PLAStics in the Sea, LABPLAS, (Grant H2020-101003954 supported by the EU H2020 program). The Program “Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Ultra-Trace Mercury Determination in Seawater After Vortex-Assisted Liquid-Liquid Micro-Extraction

  • Conchado Amado, Paula
  • Sánchez-Piñero, Joel
  • Moreda-Piñeiro, Jorge
  • Turnes-Carou, Isabel
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] In the present study, an analytical methodology based on a vortex-assisted liquid-liquid micro-extraction (VALLME) was developed for extraction and enrichment technique of total mercury (Hg) from seawater after derivatisation with ammonium pyrrolidine dithiocarbamate (APDC), while Hg quantitation was performed by atomic absorption spectrometry (AAS) using a Direct Mercury Analyser DMA-80 spectrometer based on thermal desorption. Variables affecting Hg derivatisation (including pH and APDC concentration) and VALLME extraction (comprising extraction (vortex) time, acceptor solvent (hexane) volume and ionic strength of donor phase) were explored. Enrichment factor (EF) and extraction recovery (ER) of 51 and 76 ± 5.3% were obtained from only 20 mL of seawater (at pH = 3) when using an APDC concentration of 0.125 mmol/L, and vortex time and acceptor solution volume of 4 min and 300 μL, respectively; whereas NaCl addition had no effect on Hg determination. The VALLME-AAS method has been high sensitive (quantification limit, QL = 10.3 ng L−1) and precise (with relative standard deviations, RSDs of <14%). The developed procedure has been tested by analysing different sea water (NASS-7) and estuarine water (SLEW-3 and BCR-505) certified reference materials. Finally, Hg levels between 34 and 172 ng L−1 have been assessed in several seawater samples at A Coruña bay., Financial support by the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) (reference: ED431C 2021/56) potentially co-financed by ERDF-Ministerio de Economía y Empresa (MINECO) (UNLC15-DE-3097, financed together (80/20 %) with the Xunta de Galicia); by European Union (project reference: Grant H2020- 101003954); by Ministerio de Ciencia e Innovación (project references: PID2019- 108857RB-C31/AEI/10.13039/501100011033 and PCI2020-112145). Joel Sánchez-Piñero acknowledges the Xunta de Galicia (Consellería de Cultura, Educación e Universidade) for a posdoctoral grant (ED481B-2022-002), Xunta de Galicia; ED431C 2021/56, Xunta de Galicia; ED481B-2022-002
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Measurement of Tyre-Based Microplastics Using Traditional and Quantum Cascade Laser-Based Infrared Spectrometry

  • Román-Zas, Cristina
  • Ferreiro, Borja
  • Terán Baamonde, Javier
  • Del Castillo Busto, María Estela
  • Andrade-Garda, José Manuel
  • Muniategui, Soledad
[Abstrac] Background: Despite the potential environmental impact of TWPs (tyre wear particles), there is a lack of reliable analytical methodologies suitable for their routine identification and characterization. The number of papers dealing with this topic is, so far, very reduced and, therefore, there is a need for addressing it, mostly because traditional transmittance-based IR techniques are suboptimal due to scattering caused by black carbon in tyres. Results: This study aims to evaluate the most appropriate infrared (IR) spectrometric technique for monitoring TWPs. Macro attenuated total reflectance (ATR), reflectance microscopy, and quantum cascade laser-based micro transflectance (QCL-LDIR) were employed to analyse samples from used car and truck tyres in two sample configurations: small tyre fragments (~1 cm2 ) and TWPs (< 1 mm). ATR yielded well-defined spectra with good signal-to-noise ratios, allowing for a straightforward interpretation of the major functional moieties. Despite reflectance measurements on tyre fragments provided good results, those on TWPs offered limited information due to noise and scattering. Transflectance offered clear peaks and enhanced resolution in the fingerprint region –compared to the other techniques-, much faster analysis times and the ability to effectively measure particles down to 20–10 µm, thus, emerging as the most effective technique for TWPs analysis. However, spectral interpretation is not immediate. Further, a proof-of-concept chemometric study was done to evaluate whether the analytical techniques contain information to differentiate types of tyres. An unsupervised pattern recognition and a supervised classification technique (principal components analysis and classification trees, respectively) were used, which were able to differentiate among the tyres, notably the truck tyre from the cars tyres, This work was supported partially by the EU (Horizon2020 and the Joint Programming Initiative Healthy and Productive Seas and Oceans (JPI Oceans), LABPLAS project (LAnd-Based Solutions for PLAstics in the Sea), Grant 101003954-H2020-SC5-2020-2) and by project PID2022-138421OB-C21, Spain, financed by MCIN/AEI/10.13039/ 501100011033/FEDER, UE. The Galician Government (Xunta de Galicia, Grant ED431C 2021/56) is also acknowledged. M.E. del Castillo also thanks the Next Generation EU Programs and the Spanish Government for her María Zambrano Grant (RSU.UDC.MZ08). J. Terán-Baamonde acknowledges Xunta de Galicia, Spain, for his postdoctoral Grant (ED481B2021-090), Xunta de Galicia; ED431C 2021/56, Xunta de Galicia; ED481B2021-090
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Reviewing the Fundamentals and Best Practices to Characterize Microplastics Using State–of–The-Art Quantum-Cascade Laser Reflectance-Absorbance Spectroscopy

  • López-Rosales, Adrián
  • Ferreiro, Borja
  • Andrade-Garda, José Manuel
  • Kerstan, Andreas
  • Robey, Darren
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG., [Abstract] Microplastic pollution studies depend on reliable identification of the suspicious particles. Out of the various analytical techniques available to characterize them, infrared transflectance using a tuneable mid-IR quantum cascade laser is a high-throughput state-of-the-art imaging option, specifically Agilent's QCL-LDIR (Quantum Cascade Laser Direct Infrared imaging). Its conceptual grounds are reviewed, instrumental developments are discussed, along with a review of applications and best practices to overcome obstacles/difficulties in routine measurements, namely: the spectral range, the variation of some peak intensities with the particles size, processing speed, and avoiding the use of measurement aliquots. Objective procedures to avoid too many false positives when identifying spectra and to distinguish fibers and fragments are given. These practices open a path to QCL-LDIR measurement standardization and potential use for microplastics monitoring, as requested by many governmental bodies in charge of setting environmental protection rules., This work is a part of the European Union H2020-funded LABPLAS project (Grant No. 101003954). The Spanish Research Agency and the Ministry of Science and Innovation are also acknowledged (SplashMare project, Grant PID2022-138421OB-C21). The Program “Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Tesis doctoral (DoctoralThesis)

Microplásticos en el medio ambiente: desarrollo de métodos analíticos para el tratamiento de muestras y caracterización por espectroscopía infrarroja

  • López-Rosales, Adrián
Tese por compendio de publicacións, [Resumen] La contaminación por microplásticos representa un problema ambiental y ecológico de gran magnitud debido a su ubicuidad y persistencia en los ecosistemas. Su detección y caracterización son esenciales para evaluar su impacto y diseñar estrategias eficaces de mitigación. A pesar de los avances en normativas y regulaciones internacionales, aún no existen protocolos estandarizados ni métodos de referencia unificados para su caracterización en muestras ambientales. La presente Tesis Doctoral se centra en el estudio y desarrollo de métodos analíticos para determinar microplásticos en muestras ambientales. En ella se han validado métodos de digestión y análisis para diversos tipos de matrices: plancton, algas, estómagos de peces, mejillones, deposición atmosférica y sedimentos marinos. Asimismo, se han explorado estrategias para mejorar los análisis mediante micro espectroscopía infrarroja, centrándose en la reducción de tiempos de análisis y aseguramiento de la fiabilidad de los resultados cuando se trabaja tanto con transformada de Fourier tradicional (detector MCT) como con láser sintonizable de cascada cuántica (QCL-IR). Además de todo ello, la presente Tesis Doctoral ofrece una visión global de la problemática de los microplásticos en el medio ambiente, abordando su impacto ambiental y social. Por otra parte, se presenta una revisión sobre el estado actual de las metodologías analíticas para el análisis de microplásticos, destacando sus avances y limitaciones. Con esta Tesis se pretende aportar conocimientos fundamentales y contribuir a la implementación y/o mejora de protocolos analíticos para caracterizar microplásticos en diversas matrices ambientales. Los resultados favorables proporcionan una base sólida para la implementación de protocolos en los diferentes laboratorios de rutina., [Resumo] A contaminación por microplásticos representa un problema ambiental e ecolóxico de gran magnitude debido á súa ubicuidade e persistencia nos ecosistemas. A súa detección e caracterización son esenciais para avaliar o seu impacto e deseñar estratexias eficaces de mitigación. A pesar dos avances en normativas e regulacións internacionais, aínda non existen protocolos estandarizados nin métodos de referencia unificados para a súa caracterización en mostras ambientais. A presente Tese Doutoral céntrase no estudo e desenvolvemento de métodos analíticos para determinar microplásticos en mostras ambientais. Nela validáronse métodos de dixestión e análise para mostras de biota, tais como: plancton, algas, estómagos de peixes e mexillóns. Así como noutras matrices ambientais, coma deposición atmosférica ou sedimentos mariños. Asemade, exploráronse estratexias para mellorar as análises empregando micro espectroscopía infravermella, centrándose na redución de tempos das análises e asegurar a fiabilidade dos resultados empregando tanto a transformada de Fourier tradicional (detector MCT) coma un láser sintonizable de cascada cuántica (QCL-IR). Ademáis de todo iso, a presente Tese Doutoral aporta unha visión global da problemática dos microplásticos no medio ambiente, abordando o seu impacto ambiental e social. Por outra banda, preséntase unha revisión sobre o estado actual das metodoloxías analíticas para a análise de microplásticos, destacando os seus avances e limitacións. Con esta Tese preténdese achegar coñecementos fundamentais e contribuír á implementación e/ou mellora de protocolos analíticos para caracterizar microplásticos en diversas matrices ambientais. Os resultados favorables proporcionan un baseamento sólido para a implementación de protocolos nos diferentes laboratorios de análises de rutina., [Abstract] Microplastic pollution represents a major environmental and ecological problem, due to its ubiquity and persistence in the ecosystems. Their detection and characterisation are essential to assess their impact and design effective mitigation strategies. Despite advances in international standards and regulations, there are still no standardised protocols or unified reference methods for their characterisation in environmental samples. This Doctoral Thesis focuses on the study and development of analytical methods for the determination of microplastics in environmental samples. Here, digestion and analysis methods have been validated for various types of biotic samples, such as plankton, algae, fish stomachs and mussels. Also, for other environmental matrices, such as atmospheric deposition or marine sediments. Strategies to improve infrared-based analysis have been explored, focusing on reducing analysis times and ensuring the reliability of results when two infrared microspectroscopy techniques were used; namely, traditional Fourier transform (MCT detector) and tunable quantum-cascade laser-based IR spectroscopy (QCL-IR). In addition, this Doctoral Thesis offers an overall perspective of the problem posed by microplastics in the environment, addressing their environmental and social impact. Furthermore, an overview of the state-of-the-art of the analytical methodologies employed currently for the analysis of microplastics is presented, highlighting their advances and limitations. The aim of the Thesis is to provide fundamental knowledge and contribute to the implementation and/or improvement of analytical protocols for the characterisation of microplastics in different environmental matrices. The satisfactory results provide a solid foundation to implement the protocols in laboratories devoted to routine analyses of microplastics., La presente Tesis Doctoral ha sido realizada en el Grupo de Investigación de Química Analítica Aplicada (QANAP) de la Universidade da Coruña, y se agradece la financiación otorgada por los siguientes proyectos (orden cronológico inverso): -Aditivos Plásticos más Seguros para biopolímeros y neumáticos para EcosistemasMarinos más Saludables (SPLASHMARE). Subproyecto: Caracterización química deMicroplásticos procedentes de Biopolímeros y desgaste de Neumáticos y susAditivos (CHEMBIOTA). Ref: PID2022-138421OB-C21. IP UDC: S. Muniategui-Lorenzo y J.M Andrade. Entidad financiadora: Ministerio de Ciencia, Innovación yUniversidades, Agencia Estatal de Investigación, con fondos FEDER. Fecha:01/09/2023-31/08/2026. -Metrological traceability of measurement data from nano to small-microplastics fora greener environment and food safety – PlasticTrace. Ref: 21GRD07 Convocatoria:H2020 EURAMET. Coordinador: Andrea Giovannozzi- INRIM (Italia). IP UDC: SoledadMuniategui Lorenzo. Entidad financiadora: European Commission: EuropeanPartnership on Metrology (EURAMET) y Horizon Europe. Fecha: 1/10/2022-30/09/2025. -Land-Based Solutions for Plastics in the Sea (LABPLAS). Ref: H2020-101003954Proyecto H2020, Convocatoria CE H2020-CE-SC5-30-2020. Coordinador: R Beiras(Universidad de Vigo). IP UDC: Soledad Muniategui Lorenzo. Entidad financiadora:Unión Europea, Programa H2020. Fecha: 1/6/2021-31/5/2025. -Red Temática de investigación de Micro y Nanoplásticos en el Medio Ambiente.EnviroPlaNet (RED2018-102345-T). Coordinador: R. Rosal (UAH). IP UDC: S.Muniategui-Lorenzo. Entidad financiadora: Ministerio de Ciencia, Innovación yUniversidades. Fecha 2019-2020. Enfoque integrado sobre el destino de MicroPlásticos (MPs) hacia ecosistemasmarinos saludables (MicroplastiX). Ref PCI2020-112145. Programa internacional: JPIOceans 2019. Investigador Principal: Prof Luca Brandt KTH, Royal Institute ofTechnology, Sweden. IP UDC: Soledad Muniategui Lorenzo. Entidad financiadora:Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación. Fecha:01/04/2020–31/03/2023.
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Sample-Based Subsampling Strategies to Identify Microplastics in the Presence of a High Number of Particles Using Quantum-Cascade Laser-Based Infrared Imaging

  • López-Rosales, Adrián
  • Andrade-Garda, José Manuel
  • Ferreiro, Borja
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG., [Abstract] Microplastics (MPs) are ubiquitous in all ecosystems, affecting wildlife and, ultimately, human health. The complexity of natural samples plus the unspecificity of their treatments to isolate polymers renders the characterization of thousands of particles impractical for environmental monitoring using conventional spectroscopic techniques. Two primary solutions are to analyze a small fraction of the sample or to measure only a subset of particles present over a holder, known as subsampling. A strategy to subsample reflective Kevley slides and gold-coated filters using quantum-cascade laser-based infrared imaging is proposed here, as this technology is a promising tool for MPs monitoring. In contrast to most previous approaches that struggle to propose general subsampling schemes, we introduce the concept of sample-based subsampling. This can be applied ex-ante always and it highlights the best subsampling areas for a sample after a preliminary assay to count the total number of particles on a holder. The error at this stage acts as a proxy to minimize errors when evaluating the number of particles and MPs, significantly enhancing the feasibility of large-scale MPs monitoring. The predictive ability of the approach was tested for fibres and fragments, for total amounts of particles and MPs. Further, the evaluations were disaggregated by size and polymer type. In most situations the reference values were contained in the confidence intervals of the predicted values (often within the 68 % ones) and relative errors were lower than 25 %. Exceptions occurred when very scarce (one or two) items of a given size or polymer were present on the overall holder. The approach was compared to other systematic ad-hoc strategies., This work constitutes a part of the LABPLAS project (Grant Agreement No. 101003954), supported by the EU H2020 program. Funding to SplashMare project (PID2022-138421OB-C21, MICIU/AEI/10.13039/501100011033 and by FEDER, UE) is acknowledged. The Program “Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is acknowledged (Grant ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Comparison of Microplastic Type, Size, and Composition in Atmospheric and Foliage Samples in an Urban Scenario

  • Falakdin, Parisa
  • López-Rosales, Adrián
  • Andrade-Garda, José Manuel
  • Terzaghi, Elisa
  • Di Guardo, Antonio
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The rising trend of plastic production in last years and the inadequate disposal of related waste has raised concerns regarding microplastic-related environmental issues. Microplastic particles disperse by means of transport and deposition processes to different ecosystems and enter food chains. In this paper, atmospheric deposition and foliage samples of two species (i.e., Hedera helix and Photinia glabra) were collected and analysed for the quantity and identity of microplastics (MPs). A preliminary methodology to treat foliage samples and subsequently identify MPs using a quantum cascade laser IR spectrophotometer is presented. The treatment of airborne samples involved filtration, mild digestion, concentration, and transfer onto reflective slides whereas that for foliage involved washing, concentration, and transference of putative MPs onto reflective slides. Fibers and fragments were differentiated according to their physical features (size, width, height, etc.) and calculating derived characteristics (namely, circularity and solidity). The preliminary results obtained suggest a good agreement between atmospheric-deposited and foliage-retained MPs, showing the capability of leaves to act as passive samplers for environmental monitoring., This research was partially supported by the LAnd-Based Solutions for PLAstics in the Sea Project (LABPLAS Project), Grant Agreement No. 101003954, under the European Union's Horizon 2020 research and innovation programme, and the Integrated approach on the fate of MicroPlastics (MPs) towards healthy marine ecosystems Project (MicroplastiX project), Grant PCI2020-112145, supported by the JPI_Oceans Program and by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU/PRTR”. The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56). The PhD School of the University of Insubria is also acknowledged for funding the scholarship of P.F. Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

A Reliable Method for the Isolation and Characterization of Microplastics in Fish Gastrointestinal Tracts Using an Infrared Tunable Quantum Cascade Laser System

  • López-Rosales, Adrián
  • Andrade-Garda, José Manuel
  • Fernández-González, V.
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] Societal and environmental concern due to frequent reports of microplastics in fish stomachs raised as they may accumulate along the trophic chain. The request for analysing microplastics in fish stresses two major analytical issues: sample treatment and final characterization. The, so far, workhorse for chemical characterization is infrared spectroscopy which is time-consuming. Here, a quantum cascade laser-based device is used to accelerate the characterization stage. Its novelty poses new challenges for sample processing and particle handling because the unknown particles must be transferred to a reflective slide. In this study, three sample digestion protocols (alkaline-oxidative with H2O2, and alkaline-oxidative with NaClO and enzymatic-oxidative) and three different procedures to transfer the filter cake to reflective slides are compared. A simplified enzymatic-oxidative digestion (validated through an interlaboratory exercise) combined with a Syncore® automatic evaporation system and a Laser Direct Infrared Imaging (LDIR) device is proposed first time as a reliable and relatively fast method to treat gastrointestinal tracts of fish. Analytical recoveries were studied using samples of Scomber scombrus and they were ca. 100% for big –i.e., >500 μm- and ca. 90% for medium –i.e., 200–300 μm- particles and ca. 75% for 10 μm thick fibres., This research was supported by the LAnd-Based Solutions for PLAstics in the Sea Project (LABPLAS Project), Grant Agreement No. 101003954, under the European Union's Horizon 2020 research and innovation programme, and the Integrated approach on the fate of MicroPlastics (MPs) towards healthy marine ecosystems Project (MicroplastiX project), Grant PCI2020-112145, supported by the JPI_Oceans Program and by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU/PRTR”. The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Misidentification of PVC Microplastics in Marine Environmental Samples

  • Fernández-González, V.
  • Andrade-Garda, José Manuel
  • López-Mahía, P.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Poly(vinylchloride), PVC, is the third most demanded polymer in Europe although its presence in marine ecosystems, surprisingly, is scarcely observed. This does not reflect neither its production nor its widespread usage. Therefore, it is imperative to understand why this may happen. PVC is the least stable of the high-tonnage produced polymers as it has the highest sensitivity towards UV radiation and, therefore, photo-degradation is of maximum relevance. The big amount of additives included in PVC formulations, weathering and the different treatments required to isolate it from environmental samples can modify the surface of PVC microplastics, making their spectral identification/quantification an analytical challenge. All these factors can lead to large PVC underestimations in environmental studies, in which other polymers like PE, PP or PS outstand. Further, the fact that the infrared spectrum of weathered PVC can be confounded with that of PE is of most relevance and, therefore, remarkable misidentifications and/or wrong quantifications may occur. In this work some relevant factors that can explain the low percentages of PVC reported in the literature are discussed and special emphasis is made on the need for suitable spectroscopic databases that include PVC weathered standards. This has been confirmed by the results of a detailed study of PVC weathering under pilot-scale conditions, monitoring its spectroscopic and physical changes over time., This work is part of the project MicroplastiX (Grant PCI2020-112145) supported by the JPI_Oceans Program and by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR”; by the LAnd-Based solutions for PLAStics in the Sea (LABPLAS) Grant H2020- 101003954 and “ChemPlas” Project supported by the Agencia Estatal de Investigación (Grant PID2019-108857RB-C31/AEI/10.13039/501100011033). The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Evaluating the alterations of the estrogen-responsive genes in Cyprinodon variegatus larvae for biomonitoring the impacts of estrogenic endocrine disruptors (EEDs)

  • Moreno Abril, Sandra Isabel
  • Olmos Pin, Ana
  • Schonemann, Alexandre M.
  • Bellot, Marina
  • Gómez-Canela, Cristian
  • Beiras, Ricardo
Currently, endocrine disruptors (EDs) can be found in all the environmental compartments. To understand the effects of estrogenic EDs (EEDs), adults of Cyprinodon variegatus have been classically used as a marine model. However, it is during development that exposure to contaminants may generate permanent consequences. Thus, the aim of this study was to verify the effects produced by acute exposure to 17α-ethinylestradiol (EE2) in C. variegatus larvae. Quantitative PCR (qPCR) results revealed the induction of vtg and zp gene expression on exposure to 1000 ng/L EE2 and the induction of vtgc, zp2, zp3 and cyp19a2, and inhibition of vtgab, wap and cyp1a1 on exposure to 100 ng/L EE2. Lower concentrations inhibited the gene expression of vtgab and wap (50 ng/L), cyp1a1 (25 ng/L) and zp2 (12.5 ng/L). These alterations in gene expression allow us to affirm that larvae of C. variegatus are an efficient and sensitive model for biomonitoring EEDs., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Evaluating the alterations of the estrogen-responsive genes in Cyprinodon variegatus larvae for biomonitoring the impacts of estrogenic endocrine disruptors (EEDs)

  • Moreno Abril, Sandra Isabel
  • Olmos Pin, Ana
  • Schonemann, Alexandre M.
  • Bellot, Marina
  • Gómez-Canela, Cristian
  • Beiras, Ricardo
Currently, endocrine disruptors (EDs) can be found in all the environmental compartments. To understand the effects of estrogenic EDs (EEDs), adults of Cyprinodon variegatus have been classically used as a marine model. However, it is during development that exposure to contaminants may generate permanent consequences. Thus, the aim of this study was to verify the effects produced by acute exposure to 17α-ethinylestradiol (EE2) in C. variegatus larvae. Quantitative PCR (qPCR) results revealed the induction of vtg and zp gene expression on exposure to 1000 ng/L EE2 and the induction of vtgc, zp2, zp3 and cyp19a2, and inhibition of vtgab, wap and cyp1a1 on exposure to 100 ng/L EE2. Lower concentrations inhibited the gene expression of vtgab and wap (50 ng/L), cyp1a1 (25 ng/L) and zp2 (12.5 ng/L). These alterations in gene expression allow us to affirm that larvae of C. variegatus are an efficient and sensitive model for biomonitoring EEDs., info:eu-repo/semantics/publishedVersion