Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

A finite strain elastic-corrector rate formulation for void growth models

  • Zhang, Meijuan
  • Vadillo Martín, Guadalupe
  • Montáns, Francisco J
Recently, a novel framework for large strain elastoplasticity has been introduced. This approach preserves the multiplicative decomposition of the deformation gradient, avoiding Green-like elastoplastic decompositions of total strains, but resulting in additive predictor-corrector algorithmic implementations as in small strains, and using any form of hyperelastic stored energy. Using this approach, large strain complexities reduce to non-iterative kinematical pre- and post-processors. In this work, we extend the elastic-corrector rates formulation for dealing with non-isochoric void-growth plasticity. In contrast to other large strain formulations, in the present work the relation of the void growth with the plastic flow of the matrix is not assumed, but obtained from the multiplicative decomposition, preserving exactly the kinematics of the volumetric parts. We use the Gurson-Tvergaard-Needleman (GTN) function to demonstrate the use of the framework as well as the implementation of a fully implicit Newton algorithm. The novel GTN formulation is hyperelastic, does not need the exponential mapping, and keeps an additive algorithmic update as in the infinitesimal formulation. Other non-isochoric functions can also be employed with the same kinematics., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 101007815.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Crossing Scales: Data-Driven Determination of the Micro-scale Behavior of Polymers From Non-homogeneous Tests at the Continuum-Scale

  • Amores, V. J.
  • Montáns, F. J.
  • Cueto, E.
  • Chinesta, F.
We propose an efficient method to determine the micro-structural entropic behavior of polymer chains directly from a sufficiently rich non-homogeneous experiment at the continuum scale. The procedure is developed in 2 stages: First, a Macro-Micro-Macro approach; second, a finite element method. Thus, we no longer require the typical stress-strain curves from standard homogeneous tests, but we use instead the applied/reaction forces and the displacement field obtained, for example, from Digital Image Correlation. The approach is based on the P-spline local approximation of the constituents behavior at the micro-scale (a priori unknown). The sought spline vertices determining the polymer behavior are first pushed up from the micro-scale to the integration point of the finite element, and then from the integration point to the element forces. The polymer chain behavior is then obtained immediately by solving a linear system of equations which results from a least squares minimization error, resulting in an inverse problem which crosses material scales. The result is physically interpretable and directly linked to the micro-structure of the material, and the resulting polymer behavior may be employed in any other finite element simulation. We give some demonstrative examples (academic and from actual polymers) in which we demonstrate that we are capable of recovering “unknown” analytical models and spline-based constitutive behavior previously obtained from homogeneous tests. Copyright © 2022 Amores, Montáns, Cueto and Chinesta.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

A model for rubber-like materials with three parameters obtained from a tensile test

  • Amores Medianero, Victor
  • Moreno Corrales, Laura|||0000-0003-1988-7441
  • Benitez Baena, Jose Maria|||0000-0001-8305-0713
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Topology optimization approach for functionally graded metamaterial components based on homogenization of mechanical variables

  • Ben-Yelun Insenser, Ismael|||0000-0002-0138-614X
  • Saucedo Mora, Luis|||0000-0003-1091-6875
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010
  • Benitez Baena, Jose Maria|||0000-0001-8305-0713
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Using the Mooney Space to Characterize the Non-Affine Behavior of Elastomers

  • Moreno Corrales, Laura|||0000-0003-1988-7441
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010
  • Benitez Baena, Jose Maria|||0000-0001-8305-0713
  • Saucedo Mora, Luis|||0000-0003-1091-6875
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Self-learning locally-optimal hypertuning using maximum entropy, and comparison of machine learning approaches for estimating fatigue life in composite materials of the aerospace industry

  • Ben-Yelun Insenser, Ismael|||0000-0002-0138-614X
  • Díaz Lago, Miguel|||0000-0002-4400-587X
  • Saucedo Mora, Luis|||0000-0003-1091-6875
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010
  • Callado Sanz, Ricardo
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

The Updated Properties Model (UPM): A topology optimization algorithm for the creation of macro–micro optimized structures with variable stiffness

  • Saucedo Mora, Luis|||0000-0003-1091-6875
  • Ben-Yelun Insenser, Ismael|||0000-0002-0138-614X
  • García Modet, Hugo
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
Archivo Digital UPM
Publication Tesis doctoral (DoctoralThesis)

Topology optimization and data-driven approaches for functionally graded metamaterials

Archivo Digital UPM
Publication Artículo científico (JournalArticle)

GAM: General Auxetic Metamaterial with Tunable 3D Auxetic Behavior Using the Same Unit Cell Boundary Connectivity

  • Ben-Yelun Insenser, Ismael|||0000-0002-0138-614X
  • Gómez Carano, Guillermo
  • San Millán Fiel, Francisco Javier
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
  • Saucedo Mora, Luis|||0000-0003-1091-6875
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Incorporation of Defects in Finite Elements to Model Effective Mechanical Properties of Metamaterial Cells Printed by Selective Laser Melting

  • Vera Rodríguez, Gonzalo|||0009-0007-0930-3269
  • Moreno Corrales, Laura|||0000-0003-1988-7441
  • Marín González, Ignacio
  • Barba Cancho, Daniel|||0000-0002-1413-6932
  • Montans Leal, Francisco Javier|||0000-0002-0046-6084
  • Sanz Gomez, Miguel Angel|||0000-0002-5761-9010