Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Superconducting spintronic tunnel diode

  • Strambini, E.
  • Spies, M.
  • Ligato, N.
  • Ilic, Stefan
  • Rouco, M.
  • González Orellana, Carmen
  • Ilyn, Maxim
  • Rogero Blanco, Celia
  • Bergeret Sbarbaro, F. Sebastian
  • Moodera, J. S.
  • Virtanen, P.
  • Heikkila, T. T.
  • Giazotto, F.
Diodes are characterized by mono-directional flow of current, yet this simplicity belies their critical importance in electronics and optics. Here, Strambini et al demonstrate a superconducting quasi-particle equivalent, achieved by the use of a thin ferromagnetic insulator. Diodes are key elements for electronics, optics, and detection. Their evolution towards low dissipation electronics has seen the hybridization with superconductors and the realization of supercurrent diodes with zero resistance in only one direction. Here, we present the quasi-particle counterpart, a superconducting tunnel diode with zero conductance in only one direction. The direction-selective propagation of the charge has been obtained through the broken electron-hole symmetry induced by the spin selection of the ferromagnetic tunnel barrier: a EuS thin film separating a superconducting Al and a normal metal Cu layer. The Cu/EuS/Al tunnel junction achieves a large rectification (up to similar to 40%) already for a small voltage bias (similar to 200 mu V) thanks to the small energy scale of the system: the Al superconducting gap. With the help of an analytical theoretical model we can link the maximum rectification to the spin polarization (P) of the barrier and describe the quasi-ideal Shockley-diode behavior of the junction. This cryogenic spintronic rectifier is promising for the application in highly-sensitive radiation detection for which two different configurations are evaluated. In addition, the superconducting diode may pave the way for future low-dissipation and fast superconducting electronics., This work was mainly supported by the EU's Horizon 2020 research and innovation program under Grant Agreement No. 800923 (SUPERTED) funding all the authors. E.S. and F.G. acknowledge the European Research Council under Grant Agreement No. 899315 (TERASEC), and the EU's Horizon 2020 research and innovation program under Grant Agreement No. 964398 (SUPERGATE) for partial financial support. M.S. and E.S. acknowledge partial funding from the European Union's Horizon 2020 research and innovation program under the Marie Skodowska Curie Action IF Grant No. 101022473 (SuperCONtacts). J.M. acknowledges financial support in the USA by the Army Research Office (grant ARO W911NF-20-2-0061), ONR (grant N00014-20-1-2306), NSF (grant DMR 1700137) and NSF C-Accel Track C Grant No. 2040620. The work of F.S.B., C.R. and M.I. was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) through Project PID2020-114252GB-I00 (SPIRIT). F.S.B. acknowledges financial support by the A. v. Humboldt Foundation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superconducting spintronic tunnel diode

  • Strambini, Elia
  • Spies, Maria
  • Ligato, Nadia
  • Ilić, Stefan
  • Rouco, Mikel
  • González-Orellana, Carmen
  • Ilyn, Max
  • Rogero, Celia
  • Bergeret, F. Sebastian
  • Moodera, J. S.
  • Virtanen, Pauli
  • Heikkilä, T. T.
  • Giazotto, Francesco
Diodes are key elements for electronics, optics, and detection. Their evolution towards low dissipation electronics has seen the hybridization with superconductors and the realization of supercurrent diodes with zero resistance in only one direction. Here, we present the quasi-particle counterpart, a superconducting tunnel diode with zero conductance in only one direction. The direction-selective propagation of the charge has been obtained through the broken electron-hole symmetry induced by the spin selection of the ferromagnetic tunnel barrier: a EuS thin film separating a superconducting Al and a normal metal Cu layer. The Cu/EuS/Al tunnel junction achieves a large rectification (up to ∼40%) already for a small voltage bias (∼200 μV) thanks to the small energy scale of the system: the Al superconducting gap. With the help of an analytical theoretical model we can link the maximum rectification to the spin polarization (P) of the barrier and describe the quasi-ideal Shockley-diode behavior of the junction. This cryogenic spintronic rectifier is promising for the application in highly-sensitive radiation detection for which two different configurations are evaluated. In addition, the superconducting diode may pave the way for future low-dissipation and fast superconducting electronics., This work was mainly supported by the EU’s Horizon 2020 research and innovation program under Grant Agreement No. 800923 (SUPERTED) funding all the authors. E.S. and F.G. acknowledge the European Research Council under Grant Agreement No. 899315 (TERASEC), and the EU’s Horizon 2020 research and innovation program under Grant Agreement No. 964398 (SUPERGATE) for partial financial support. M.S. and E.S. acknowledge partial funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska Curie Action IF Grant No. 101022473 (SuperCONtacts). J.M. acknowledges financial support in the USA by the Army Research Office (grant ARO W911NF-20-2-0061), ONR (grant N00014-20-1-2306), NSF (grant DMR 1700137) and NSF C-Accel Track C Grant No. 2040620. The work of F.S.B., C.R. and M.I. was supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) through Project PID2020-114252GB-I00 (SPIRIT). F.S.B. acknowledges financial support by the A. v. Humboldt Foundation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superconductor-ferromagnet hybrids for non-reciprocal electronics and detectors

  • Geng, Zhuoran
  • Hijano, Alberto
  • Ilić, Stefan
  • Ilyn, Max
  • Maasilta, I. J.
  • Monfardini, Alessandro
  • Spies, Maria
  • Strambini, Elia
  • Virtanen, Pauli
  • Calvo, Martino
  • González-Orellana, Carmen
  • Helenius, Ari P.
  • Khorshidian, Sara
  • Levartoski de Araujo, Clodoaldo I.
  • Levy-Bertrand, Florence
  • Rogero, Celia
  • Giazotto, Francesco
  • Bergeret, F. Sebastian
  • Heikkilä, T. T.
We review the use of hybrid thin films composed of superconductors and ferromagnets for creating non-reciprocal electronic components and self-biased detectors of electromagnetic radiation. We begin by introducing the theory behind these effects, as well as discussing various potential materials that can be used in the fabrication of these components. We then proceed with a detailed discussion on the fabrication and characterization of Al/EuS/Cu and EuS/Al/Co-based detectors, along with their noise analysis. Additionally, we suggest some approaches for multiplexing such self-biased detectors., This work was mainly funded by EU’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 800923 (SuperTED). F S B and C R also acknowledge funding from the Spanish MICINN-AEI (Project Nos. PID2020-114252GB-I00 (SPIRIT) and TED2021-130292B-C42), and the Basque Government (Grant IT-1591-22), M S and E S acknowledge partial funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie Action IF Grant No. 101022473 (SuperCONtacts). F G acknowledges the EU’s Horizon 2020 research and innovation program under Grant Agreement No. 964398 (SUPERGATE) for partial financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Superconductor-ferromagnet hybrids for non-reciprocal electronics and detectors [Dataset]

  • Geng, Zhuoran
  • Hijano, Alberto
  • Ilić, Stefan
  • Ilyn, Max
  • Maasilta, I. J.
  • Monfardini, Alessandro
  • Spies, Maria
  • Strambini, Elia
  • Virtanen, Pauli
  • Calvo, Martino
  • González-Orellana, Carmen
  • Helenius, Ari P.
  • Khorshidian, Sara
  • Levartoski de Araujo, Clodoaldo I.
  • Levy-Bertrand, Florence
  • Rogero, Celia
  • Giazotto, Francesco
  • Bergeret, F. Sebastian
  • Heikkilä, T. T.
# Data for the manuscript "Superconductor-ferromagnet hybrids for non-reciprocal electronics and detectors", submitted to Superconductor Science and Technology, arXiv:2302.12732. This archive contains the data for all plots of numerical data in the manuscript. ## Fig. 4 Data of Fig. 4 in the WDX (Wolfram Data Exchange) format (unzip to extract the files). Contains critical exchange fields and critical thicknesses as functions of the temperature. Can be opened with Wolfram Mathematica with the command: Import[FileNameJoin[{NotebookDirectory[],"filename.wdx"}]] ## Fig. 5 Data of Fig. 5 in the WDX (Wolfram Data Exchange) format (unzip to extract the files). Contains theoretically calculated I(V) curves and the rectification coefficient R of N/FI/S junctions. Can be opened with Wolfram Mathematica with the command Import[FileNameJoin[{NotebookDirectory[],"filename.wdx"}]]. ## Fig. 7a Data of Fig. 7a in the ascii format. Contains G in uS as a function of B in mT and V in mV. ## Fig. 7c Data of Fig. 7c in the ascii format. Contains G in uS as a function of B in mT and V in mV. ## Fig. 7e Data of Fig. 7e in the ascii format. Contains G in uS as a function of B in mT and V in mV. The plots 7b, d, and f are taken from the plots a, c and e as indicated in the caption of the figure. ## Fig. 8 Data of Fig. 8 in the ascii format. Contains G in uS as a function V in mV for several values of B in mT. ## Fig. 8 inset Data of Fig. 8 inset in the ascii format. Contains G_0/G_N as a function of B in mT. ## Fig9a_b First raw Magnetic field values in T, first column voltage drop in V, rest of the columns differential conductance in S ## Fig9b_FIT First raw Magnetic field values in T, first column voltage drop in V, rest of the columns differential conductance in S ## Fig9c First raw Magnetic field values in T, first column voltage drop in V, rest of the columns R (real number) ## Fig9c inset First raw Magnetic field values in T, odd columns voltage drop in V, even columns injected current in A ## Fog9d Foist column magnetic field in T, second column conductance ration (real number), sample name in the file name. ## Fig. 12 Data of Fig. 12 in the ascii format. Contains energy resolution as functions of temperature and tunnel resistance with current and voltage readout. ## Fig. 13 Data of Fig. 13 in the ascii format. Contains energy resolution as functions of (a) exchange field, (b) polarization, (c) dynes, and (d) absorber volume with different amplifier noises. ## Fig. 14 Data of Fig. 14 in the ascii format. Contains detector pulse current as functions of (a) temperature change (b) time with different detector parameters. ## Fig. 17 Data of Fig. 17 in the ascii format. Contains dIdV curves as function of the voltage for different THz illumination frequency and polarization. ## Fig. 18 Data of Fig. 18 in the ascii format. Contains the current flowing throughout the junction as function time (arbitrary units) for ON and OFF illumination at 150 GHz for InPol and CrossPol polarization. ## Fig. 21 Data of Fig. 21c in the ascii format. Contains the magnitude of readout line S43 as frequency. Data of Fig. 21d in the ascii format. Contains the magnitude of iKID line S21 as frequency., SuperCONtacts – Solid state diffusion for atomically sharp interfaces in semiconductor-superconductor hybrid structures 101022473. European Commission SUPERTED – Thermoelectric detector based on superconductor-ferromagnet heterostructures 800923. European Commission SuperGate – Gate Tuneable Superconducting Quantum Electronics. 964398. European Commission, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Superconducting spintronic heat engine

  • Araujo, Clodoaldo I. L. de
  • Virtanen, Pauli
  • Spies, Maria
  • González-Orellana, Carmen
  • Kerschbaumer, Samuel
  • Ilyn, Max
  • Rogero, Celia
  • Heikkilä, T. T.
  • Giazotto, Francesco
  • Strambini, Elia
Heat engines are key devices that convert thermal energy into usable energy. Strong thermoelectricity, at the basis of electrical heat engines, is present in superconducting spin tunnel barriers at cryogenic temperatures where conventional semiconducting or metallic technologies cease to work. Here we realize a superconducting spintronic heat engine consisting of a ferromagnetic insulator/superconductor/insulator/ferromagnet tunnel junction (EuS/Al/AlOx/Co). The efficiency of the engine is quantified for bath temperatures ranging from 25 mK up to 800 mK, and at different load resistances. Moreover, we show that the sign of the generated thermoelectric voltage can be inverted according to the parallel or anti-parallel orientation of the two ferromagnetic layers, EuS and Co. This realizes a thermoelectric spin valve controlling the sign and strength of the Seebeck coefficient, thereby implementing a thermoelectric memory cell. We propose a theoretical model that allows describing the experimental data and predicts the engine efficiency for different device parameters., C.I.L.A., P.V., T.T.H., and F.G. acknowledge funding from the EU’s Horizon 2020 Research and Innovation Program under Grant Agreement No. 800923 (SuperTED). M.S. and E.S. acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska Curie Action IF Grant No. 101022473 (SuperCONtacts). F.G. and E.S. acknowledge the EU’s Horizon 2020 Research and Innovation Framework Program under Grant Agreement No. 964398 (SUPERGATE), No. 101057977 (SPECTRUM), and the PNRR MUR project PE0000023-NQSTI for partial financial support. C.I.L.A. acknowledges Brazilian agencies FINEP, FAPEMIG APQ-04548-22, CNPq, and CAPES (Finance Code 001). C.G.O., S.K., M.I. and C.R. acknowledge financial support by the Spanish MCIU/AEI/10.13039/501100011033, and by the European Union “NextGenerationEU”/PRTR (grants No. PID2022-138750NB-C22 and TED2021-130292B-C42). T.T.H. and P.V. acknowledge the funding from the Research Council of Finland (grant no. 354735)., Peer reviewed