Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

Interconnected Donor–Acceptor-Additive Effects on the Microstructure and Device Performance of PM6:Y6 Solar Cells

  • Gutiérrez Fernández, Edgar
  • Harillo-Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy-Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
[Abstract] The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor[thin space (1/6-em)]:[thin space (1/6-em)]acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6[thin space (1/6-em)]:[thin space (1/6-em)]Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Laminated Organic Photovoltaic Modules for Agrivoltaics and Beyond: An Outdoor Stability Study of All-Polymer and Polymer:Small Molecule Blends

  • Rodríguez Martínez, Xabier
  • Riera Galindo, Sergi
  • Ever Aguirre, Luis
  • Campoy Quiles, Mariano
  • Arwin, Hans
  • Inganäs, Olle
The integration of organic photovoltaic (OPV) modules on greenhouses is an encouraging practice to offset the energy demands of crop growth and provide extra functionality to dedicated farmland. Nevertheless, such OPV devices must meet certain optical and stability requirements to turn net zero energy greenhouse systems a reality. Here a donor:acceptor polymer blend is optimized for its use in laminated devices while matching the optical needs of crops. Optical modeling is performed and a greenhouse figure-of-merit is introduced to benchmark the trade-off between photovoltaic performance and transparency for both chloroplasts and humans. Balanced donor:acceptor ratios result in better-performing and more thermally stable devices than acceptor-enriched counterparts. The optimized polymer blend and state-of-the-art polymer:small-molecule blends are next transferred to 25 cm2 laminated modules processed entirely from solution and in ambient conditions. The modules are mounted on a greenhouse as standalone or 4-terminal tandem configurations and their outdoor stability is tracked for months. The study reveals degradation modes undetectable under laboratory conditions such as module delamination, which accounts for 10–20% loss in active area. Among the active layers tested, polymer:fullerene blends are the most stable and position as robust light harvesters in future building-integrated OPV systems., X.R.-M., S.R.-G., and O.I. acknowledge the Knut and Alice Wallenberg Foundation for funding. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL. The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through ISOSCELLES project (PID2021-128924OB-I00). The table of contents figure contains freely available resources from https://flaticon.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High Polymer Molecular Weight Yields Solar Cells with Simultaneously Improved Performance and Thermal Stability

  • Riera Galindo, Sergi
  • Sanz Lleó, Marta
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Mas Torrent, Marta
  • Martín, Jaime
  • López Mir, Laura
  • Campoy Quiles, Mariano
Simple synthetic routes, high active layer thickness tolerance as well as stable organic solar cells are relentlessly pursued as key enabling traits for the upscaling of organic photovoltaics. Here, the potential to address these issues by tuning donor polymer molecular weight is investigated. Specifically, the focus is on PTQ10, a polymer with low synthetic complexity, with number average molecular weights of 2.4, 6.2, 16.8, 52.9, and 54.4 kDa, in combination with three different non-fullerene acceptors, namely Y6, Y12, and IDIC. Molecular weight, indeed, unlocks a threefold increase in power conversion efficiency for these blends. Importantly, efficiencies above 10% for blade coated devices with thicknesses between 200 and 350 nm for blends incorporating high molecular weight donor are shown. Spectroscopic, GIWAXS and charge carrier mobility data suggest that the strong photocurrent improvement with molecular weight is related to both, improved electronic transport and polymer contribution to exciton generation. Moreover, it is demonstrated that solar cells based on high molecular weight PTQ10 are more thermally stable due to a higher glass transition temperature, thus also improving device stability., The authors are grateful to 1-Material for providing custom molecular weight PTQ10 polymer and for the fruitful discussions. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL; for the financial support provided by Ajuntament de Barcelona and the Ministeri de Ciència i Innovació within the framework of Barcelona Capital Cultural i Científic, through the project Bus Stop Integrated Organic Photovoltaic (TERRA) (22S09542-001). The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through projects PID2021-128924OB-I00 and TED2021-131911B-I00. This work was supported by the MADRAS project funded from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862492. .This work was also funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-bandgap oligothiophene-naphthalimide oligomeric semiconductors for thermoelectric applications

  • Alonso Navarro, Matías J.
  • Zapata Arteaga, Osnat
  • Riera Galindo, Sergi
  • Guo, Jiali
  • Perevedentsev, Aleksandr
  • Gutiérrez Fernández, Edgar
  • Reparaz, J. Sebastian
  • Ramos, Mar
  • Müller, Christian
  • Martín, Jaime
  • Mas Torrent, Marta
  • Segura, José L.
  • Campoy Quiles, Mariano
State-of-the-art p-type organic conjugated polymers are mostly thiophene-based semiconductors. Still, novel chemical design and a fresh perspective on different polymer backbones could pave the way for new high-performing materials and a deep understanding of donor-acceptor conjugated assemblies. Herein we designed and synthesized two novel electroactive oligomeric materials based on a donor terthiophene unit endowed with a strong electron-withdrawing naphthalimide unit. This molecular assembly has been polymerized using a palladium cross-coupling reaction with two different linkers, 1,1,1,2,2,2-hexabutyldistannane and (4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b’]dithiophene-2,6diyl)bis(trimethylstannane), to obtain the target polymers NIP3T-poly and NIP3T-BDT-poly, respectively. Both polymers exhibited an extended absorption up to 1000 nm and higher hole field-effect mobilities of up to 1.8 x 10-3 cm2V-1s-1, in comparison to the molecular assembly NIP3T, and precisely tuned energy levels that make them compatible with common p-type dopants like 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). After optimizing the doping level, we obtained a thermoelectric figure of merit up to zT = 0.02 for NIP3T-BDT-poly, comparable with benchmark F4TCNQ-vapor doped polythiophenes., This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA-955837), MICINN (PID2022-138908NB-C33, PID2022-141393OB-I00 and TED2021-129886BC43), through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the UCM (INV.GR.00.1819.10759). MJAN gratefully acknowledges Universidad Rey Juan Carlos for his postdoctoral contract. S. RG. is thankful to Marie Skłodowska Curie Cofund, Beatriu de Pinós Fellowship (AGAUR-2019 BP 00200) and Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for Grant Agreement No. 101025608, IDEAL. We thank Anders Mårtensson for help with SEC measurements and Dr. Agustín Mihi (ICMAB-CSIC) for providing access to the Bruker IR spectrophotometry equipment, and Prof. Joaquim Puigdollers (UPC) for fruitful discussions, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Film thickness dependence of nanoscale arrangement of a chiral electron donor in its blends with an achiral electron acceptor

  • Pancotti, Giulia
  • Killalea, C. Elizabeth
  • Rees, Thomas W.
  • Liirò-Peluso, Letizia
  • Riera Galindo, Sergi
  • Beton, Peter H.
  • Campoy Quiles, Mariano
  • Siligardi, Giuliano
  • Amabilino, David B.
The nanoscale chiral arrangement in a bicomponent organic material system comprising donor and acceptor small molecules is shown to depend on the thickness of a film that is responsive to chiral light in an optoelectronic device. In this bulk heterojunction, a previously unreported chiral bis(diketopyrrolopyrrole) derivative was combined with an achiral non-fullerene acceptor. The optical activity of the chiral compound is dramatically different in the pure material and the composite, showing how the electron acceptor influences the donor's arrangement compared with the pure molecule. Mueller matrix polarimetric imaging shows the authenticity of this effect and the homogeneity of short range chiral orientations between the molecules, as well as more heterogeneous short and longer range arrangements in the films observed in linear dichroic and birefringent effects. The two-dimensional circular dichroism (CD) maps and spectra show the uniformity of the short range supramolecular interactions both in spun-cast films on quartz and blade-coated films on photovoltaic device substrates, where evidence for the chiral arrangement is uniquely provided by the synchrotron CD measurements. The external quantum efficiency of the devices depends upon the handedness of the light used to excite them and the film thickness, that influences the supramolecular arrangement and organization in the film, and determines the selectivity for left or right circularly polarised light. The difference in external quantum efficiency of the photovoltaic devices between the two handedness' of light correlates with the apparent differential absorbance (g-factor) of the films., We thank most warmly Dr Flavia Pop for preliminary syntheses of asymmetric DPP monomers and Dr Christopher Mellor for the VASE data analysis. We are grateful to the University of Nottingham through the Propulsion Futures Beacon of Excellence, the MICIU/AEI/10.13039/501100011033 for the “Severo Ochoa” program for Centres of Excellence CEX2019-000917-S and CEX2023-001263-S as well as project TED2021-131911B-I00, and the EPSRC through the LDMI DTP under grant EP/R513283/1. DBA thanks the MICIU/AEI PID2021-123873NB-I00 and the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR), Grant 2021SGR01085. GP thanks La Caixa Foundation for a predoctoral contract (ID 100010434, code LCF/BQ/DI23/11990066). MCQ and SR acknowledge funding from the European Union through Marie Curie IDEAL, with grant reference 101025608. We thank Dr Markos Paradinas from the ICMAB Scanning Probe Microscopy Laboratory for the AFM images along the gradient of the solar cells. We also thank Dr Sebastian Reparaz for his help with the setup of the EQE measurements. We warmly thank Dr Martin Kreuzer at BL01–MIRAS beamline of ALBA synchrotron for IR measurements. The Diamond Light Source Ltd (beamline B23) is thanked for providing beamtime (SM30198) and Drs T.-M. Gianga and T. Jávorfi for beamline assistance., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interconnected donor-acceptor-additive effects on the microstructure and device performance of PM6 : Y6 solar cells

  • Gutiérrez-Fernández, Edgar
  • Harillo Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor : acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6 : Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed