Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An automated sonic tomography system for the inspection of historical masonry walls

  • Ortega, Javier
  • Meersman, Marnix F.L.
  • Aparicio Secanellas, Sofía
  • Liébana Gallego, Juan Carlos
  • Martín Navarro, Rodrigo
  • Anaya Velayos, José Javier
  • González Hernández, Margarita
29 páginas, 25 figuras, 3 tablas, Background: The conservation of the built masonry heritage requires a comprehensive understanding of its geometrical, structural, and material characteristics. Non-destructive techniques are a preferred approach to survey historical buildings, given the cultural value of their fabric. However, currently available techniques are typically operated manually, consuming much time at operational and processing level and thus hindering their use for the on-site inspection of heritage structures. Methods: A novel automated sonic tomography system was designed and built to inspect and obtain information about the inner structure and damage of historic masonry walls. The system consists of a hitting device mounted on a frame that can be placed adjacent to the wall under analysis. The hitting device can move along the surface within the frame area in X, Y and Z directions, generating the sonic wave. The receiving system is a scanning laser vibrometer, able to measure from the distance the displacement of a focused point over time, recording the wave when it reaches the opposite surface. Results: Six stone masonry walls with different interior geometries were constructed at the laboratory by a professional stonemason. The construction of the walls was carefully documented, including the generation of detailed photogrammetric models of each single stone. The system was applied to survey the six masonry walls. Since the inner morphology of the walls is known, the resulting tomographic images could be compared with the ground truth. Conclusions: Automating the inspection allowed to collect thousands of data in a few hours. New software was also developed to automate the processing of the data. Results are expected to highlight the potential of tomography to obtain quantitative information about the interior of heritage structures, while providing new tools that make the implementation of the technique more practical for professionals. Data, software and models have been made publicly available., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101030275. The project has also received funding from the project NDT- 3DHeritage, ref. 202250E049, from ITEFI (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of stress level and damage on sonic tomography imaging and on the estimation of deformability properties of historic stone masonry

  • Ortega, Javier
  • Meersman, Marnix F. L.
  • Aparicio Secanellas, Sofía
  • Liébana, Juan Carlos
  • Anaya Velayos, José Javier
  • González Hernández, Margarita
21 páginas, 22 figuras, 4 tablas, The paper evaluates the sensitivity of sonic tomography imaging of historic masonry structures to variations in stress level and damage. Six stone masonry walls with different geometries representative of historical typologies were constructed by a professional mason. A laboratory campaign was carried out, subjecting the walls to cyclic uniaxial compression tests. During the test, an automated sonic tomography system was used to inspect the wall under loading cycles of increasing amplitude, which led to obtain tomographic images during loading and compare them under different stress level and damage condition. The use of robotic systems was proved essential to carry out the sonic inspections simultaneously to the compression tests. Results show that sonic wave prop- agation is not only sensitive to damage level, but also to the stress state. Thus, sonic tomography has the potential to be used to measure damage and stress level of masonry components over time, for example during renovation works on an existing construction., This project has received funding from the European Union’s Hori- zon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101030275. The project is also supported by a fellowship from the Fundaci´on General CSIC´s ComFuturo programme which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 101034263. The project has also received funding from the project NDT-3DHeritage, ref. 202250E049, from ITEFI (CSIC). The authors would like to thank the staff from the laboratory of the Eduardo Torroja Institute for Construction Sciences (IETCC), from the Spanish National Research Council (CSIC), where the tests were carried out. Finally, the authors would also like to thank the stonemason Rodrigo de la Torre Martín-Romo, who built the masonry walls and whose insight and expertise was essential to decide the most appropriate masonry typologies that are most representative of histori- cal masonry constructions., Peer reviewed