Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid carbon nitride/cobalt phthalocyanine nanocomposites for efficient photocatalytic hydrogen generation

  • Arumugam, Lakshman Sundar
  • Durantini, Javier E.
  • Follana-Berná, Jorge
  • Schiller, Frederik
  • Etxebarria, Ane
  • Forzanini, Lorenzo
  • Barja, Sara
  • Sastre-Santos, Ángela
  • Giménez, Sixto
The photocatalytic production of hydrogen stands out as a promising strategy to convert and store solar energy as chemical energy in the form of a sustainable energy carrier. In the present study, a hybrid photocatalyst based on cobalt phthalocyanine (CoPc) coupled with polymeric carbon nitride (CN) is synthesized using a simple, cost-effective, and upscalable method. Both components are held together in the hybrid nanocomposite via π–π interactions, as shown by detailed structural and optical characterization. The synergistic interaction between both components, CN, a metal-free semiconductor, valued for its stability and tunable electronic properties, and CoPc, known for its excellent light absorption and electronic properties, is evidenced in a proof-of-concept photocatalytic reaction: the photo-oxidation of benzyl alcohol (BzOH) to benzaldehyde (BzO). Chemical trapping reagents were employed to elucidate the reaction mechanism, showing favorable recombination dynamics of the hybrid photocatalyst (CoPc/CN) compared to the individual components. Furthermore, photocatalytic hydrogen production was conducted in an aqueous solution using triethanolamine (TEOA) as an electron donor, with the optimized CoPc/CN nanocomposite producing 1136.5 μmol h–1 gcat–1 of H2, achieving a 50% higher hydrogen yield compared to pristine CN. These results contribute to the design of high-performance photocatalytic materials for promising solar-to-X transformations., The authors acknowledge support from the projects (RED2022-134508-T, PID2023-152771OB-I00, PID2023-149158OB-C44), funded by MCIN/AEI/10.13039/501100011033/, by “ERDF: A way of making Europe”, and by the “European Union” and the Generalitat Valenciana (CIPROM/2021/059 and MFA/2022/028). The MFA projects are part of the Advanced Materials program supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana. We are also grateful to the Serveis Centrals d’Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. S.B. acknowledges support from the European Union ERC Starting Grant COSAS (Grant #101040193). J.E.D. is grateful to the Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) of Argentina for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Layer thickness and substrate effects on superconductivity in epitaxial FeSe films on BLG/SiC(0001)

  • Wang, Yongsong
  • Guo, Haojie
  • Etxebarria, Ane
  • Sajan, Sandra
  • Barja, Sara
  • Ugeda, Miguel M.
The data that support the findings of this article are not publicly available upon publication because it is not technically feasible, and/or the cost of preparing, depositing, and hosting the data would be prohibitive within the terms of this research project. The data are available from the authors upon reasonable request., The layered nature and simple structure of FeSe reveal this iron-based superconductor as a unique building block for the design of artificial heterostructure materials. While superconductivity develops in ultrathin films of FeSe on SrTi⁢O3 substrates, it remains unclear whether it can be developed on more chemically inert, layered materials such as graphene. Here, we report on the characterization of the structural, chemical, and electronic properties of few-layer and multilayer FeSe on bilayer graphene grown on SiC(0001) using low-temperature scanning tunneling microscopy/spectroscopy (STM/STS) and x-ray photoelectron spectroscopy (XPS). STM imaging of our FeSe films with thicknesses up to three layers exhibits the tetragonal crystal structure of bulk FeSe, which is supported by XPS spectra consistent with the FeSe bulk counterpart. While our STS measurements at 340 mK reveal a metallic character for few-layer FeSe on BLG/SiC(0001), they show an absence of superconductivity, as the low-lying electronic structure exhibits a spatially anisotropic dip-like feature robust against magnetic fields. However, we find that superconductivity in FeSe/BLG/SiC(0001) starts to emerge from a thickness of five layers. Cooper pairing strength increases with film thickness, reaching critical temperatures up to 6 K above 20 layers. Our results underscore the significance of the substrate and thickness as key factors driving the suppression of superconductivity in FeSe in the 2D limit., M.M.U. acknowledges support from the European Union ERC Starting Grant LINKSPM (Grant No. 758558) and from Grant No. PID2020-116619GB-C21 funded by MCIN/AEI/10.13039/501100011033. S.B. acknowledges support by the European Union ERC Starting Grant COSAS (Grant No. 101040193). H.G. acknowledges funding from the EU NextGenerationEU/PRTR-C17.I1, as well as from the IKUR Strategy under the collaboration agreement between the Ikerbasque Foundation and DIPC on behalf of the Department of Science, Universities and Innovation of the Basque Government. S.S. acknowledges enrollment in the doctorate program “Physics of Nanostructures and Advanced Materials” from the “Advanced Polymers and Materials: Physics, Chemistry and Technology” department of the Universidad del País Vasco (UPV/EHU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Direct experimental evidence of transient Auδ+ oxide in Au electrooxidation

  • Redondo, Jesús
  • Etxebarria, Ane
  • Samal, Pankaj Kumar
  • Albons, Llorenç
  • Fernández-Climent, Roser
  • Auras, Sabine V.
  • Šmíd, Břetislav
  • Ju, Xiaohui
  • Matvija, Peter
  • Schiller, Frederik
  • Setvin, Martin
  • Mysliveček, Josef
  • Barja, Sara
Anodic electrooxidation of noble metals in acidic media represents a central topic in electrocatalysis and energy conversion due to its relevance for the oxygen evolution reaction (OER). In particular, gold electrodes are traditionally assumed to oxidize directly from the metallic state (Au0) to a trivalent state (Au3+) at high potentials relevant to OER. However, this long-standing paradigm has been increasingly challenged by recent in situ characterization studies. Here we report the direct observation of a metastable gold oxidation state (Auδ+, where 0 < δ < 3) preceding the formation of Au3+. This species is electrochemically induced on Au(111) in 0.1 M H2SO4 and observed at the electrode surface under ultrahigh vacuum (UHV) using quasi-in situ X-ray photoelectron spectroscopy (XPS). Auδ+ manifests a distinct chemical shift in XPS without conforming to a fully evolved Au3+ oxidation state. Atomic-resolution imaging via low-temperature scanning probe microscopy (LT-STM/nc-AFM) revealed that the Auδ+ phase forms an amorphous oxide layer. This study provides evidence of a two-step mechanism for Au electrooxidation accompanying the OER onset. Formation of the Auδ+ surface oxide precedes the formation of the bulk Au3+ oxide responsible for the OER. This mechanism strongly challenges the thermodynamically predicted one-step Au0 → Au3+ oxidation model. The two-step Au-oxidation mechanism parallels the proposed Pt electrooxidation pathway, suggesting a general oxidation mechanism for noble metals., J.R. acknowledges the Czech Science Foundation and the Ministry of Education, Youth and Sports of the Czech Republic for funding under PIF outgoing project number 22-18079O and MSCA Fellowship-CZ project number CZ.02.01.01/00/22_010/0008115, respectively. S.B. acknowledges support by the European Union (ERC-2021-STG, COSAS, 101040193), project PID2023-149158OB-C44 funded by MICIU/AEI/10.13039/501100011033 by ERDF/EU, and from the Basque Government through grant IT1591-22 (Grupos Consolidados UPV/EHU del Gobierno Vasco). J.M. acknowledges the financial support of the Czech Science Foundation (GAČR, Project 2021727X). P.K.S., R.F.C., M.S., and J.M. acknowledge the support from the Ministry of Education, Youth and Sports of the Czech Republic (MŠMT, Project QM4ST, reg. no. CZ.02.01.01/00/22_008/0004572). P.K.S. acknowledges the support of the Grant Agency of Charles University (GAUK, Project 199423). The authors also acknowledge the CERIC-ERIC consortium for financial support and access to experimental facilities at the LRI SPL-HTC (proposal numbers: 20222258, 20232187). P.M. acknowledges financial support from the Ministry of Education, Youth, and Sports of the Czech Republic (MŠMT, Project LM2023072). X.J. acknowledges the Czech Science Foundation GAČR Grant No. 25-15996S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The role of local pH in electrocatalysis: Measurement, impact, and control strategies

  • Rodriguez-Acosta, John W.
  • Etxebarria, Ane
  • Sruthibhai, P. V.
  • Barja, Sara
  • Calle-Vallejo, Federico
  • García-Melchor, Max
  • Rodriguez, Paramaconi
The local pH at the electrode–electrolyte interface exerts a profound, yet often underappreciated, influence on the kinetics, selectivity, and stability of electrocatalytic reactions. This review critically examines the origins, dynamics, and consequences of pH gradients in processes such as water electrolysis, CO2 reduction, nitrate reduction, and alcohol oxidation. We survey state-of-the-art experimental and computational approaches for probing local pH, including scanning electrochemical microscopy, operando spectroscopy, density functional theory, and multiscale modeling. These complementary methods reveal how near-surface (local) pH evolves with current density, electrode morphology, and electrolyte composition, thereby reshaping catalytic pathways and shifting reaction mechanisms. Particular attention is devoted to the influence of local pH on catalyst degradation and support corrosion, including phase dissolution, carbon oxidation, and membrane failure. We also discuss mitigation strategies such as buffer optimization, electrode architecture design, and gas diffusion layer engineering that enable control over local reaction environments. By integrating mechanistic insight with advanced diagnostics, this review highlights that controlling local pH is essential for improving both performance and durability in electrochemical systems. The concepts presented herein provide a framework for designing next-generation catalysts and reactors capable of operating under extreme or fluctuating (local) pH conditions., P.R. acknowledges financial support from project PID2023-153113OB-I00, funded by MICIU/AEI/10.13039/501100011033 and FEDER (EU). P.R., F.C.-V., and M.G.-M. acknowledge support from the Basque Government through the ELKARTEK program (CIC2025, KK2025-00054). F.C.-V. also acknowledges funding from projects PID2021-127957NB-I00 and TED2021-132550B–C21, funded by MICIU/AEI/10.13039/501100011033 and the European Union, respectively, as well as support from the Basque Government through grant IT1453-22 (Grupos Consolidados UPV/EHU del Gobierno Vasco). F.C.-V. and M.G.-M. acknowledge financial support from project PID2024-158557OB-C21, funded by MICIU/AEI/10.13039/501100011033 and ERDF (EU). M.G.-M. further acknowledges funding from the European Union under Grant Agreement No. 101126600. S.B., A.E., and P.V.S. acknowledge support from the European Union (ERC-2021-STG, COSAS, Grant Agreement No. 101040193), from project PID2023-149158OB-C44 funded by MICIU/AEI/10.13039/501100011033 and ERDF (EU), and from the Basque Government through grant IT1591-22 (Grupos Consolidados UPV/EHU del Gobierno Vasco)., Peer reviewed