Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Direct ink writing of biomimetic hydroxyapatite scaffolds with tailored concave porosity

  • Mazo Barbara, Laura del|||0000-0001-9482-8244
  • Díez Escudero, Anna|||0000-0003-4686-9564
  • Lodoso Torrecilla, Irene|||0000-0003-1849-5243
  • Aramesh, Morteza
  • Persson, Cecilia
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Direct ink writing (DIW) is a promising technology for the fabrication of personalized bone grafts, as it enables the customization of their geometrical conformation with high reproducibility and is compatible with the use of self-setting calcium-deficient hydroxyapatite inks. However, the scaffolds obtained by DIW consist mostly of convex filaments, which is a limitation since concave surfaces are known to promote bone regeneration in vivo. In this work, we explore the use of triply periodic minimal surface (TPMS) designs in DIW of calcium phosphate self-hardening inks as a strategy to obtain scaffolds with controlled concave macropores. The limitations of the printing parameters with high ceramic-loaded inks using DIW resulted in only 20% nominal porosity for gyroid-, diamond-, and Schwarz-based structures. The inherent layered pores from TPMS geometries enabled concavities typically unattainable via DIW, bearing substantial implications for subsequent osteoinductive capabilities. Although the mechanical properties were lower in the TPMS-based scaffolds than in the orthogonal patterned ones, the blood permeability of TPMS-based structures was higher. The concave pore architecture enhanced the osteogenic potential of the biomimetic ceramic, increasing SaOs-2 cell adhesion, proliferation, differentiation, and mineralization., This work was supported by the European Research Council (ERC; grant agreement number 101055053 [BAMBBI]), the Spanish Ministry of Science and Innovation (project PID2019-103892RB-I00/AEI/ 10.13039/501100011033 and FPU scholarship of L.d.M.B), and by AM4Life Competence Centre in Additive Manufacturing for the Life Sciences through Sweden’s Innovation Agency VINNOVA (project number 2019-00029). This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MCIN/AEI / 10.13039/501100011033. A.D.E. acknowledges the Spanish Ministry of Universities for support through the Maria Zambrano fellowship and M.P.G the Generalitat de Catalunya for the ICREA Academia Award., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Synchrotron cryo-soft X-ray microscopy reveals bacterial interactions with nanostructured calcium phosphate substrates

  • Iglesias Fernández, Marc|||0000-0003-4544-1793
  • Pérez-Berná, Ana Joaquina
  • Pereiro López, Eva
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Español Pons, Montserrat|||0000-0001-7510-0602
Nanostructured synthetic bone grafts offer a promising strategy to prevent bacterial colonisation while supporting bone regeneration. Here, calcium-deficient hydroxyapatite (CDHA) nanopillars synthesized from a-tricalcium phosphate exhibit contact-killing activity against Gram-positive Bacillus subtilis. Unlike inert bactericidal surfaces, CDHA exchanges ions with the surrounding environment, introducing chemical interactions alongside mechanical damage. Using synchrotron cryo-soft X-ray tomography and spectromicroscopy, we visualise bacterial ultrastructure and intracellular ionic changes in fully hydrated cells at subcellular resolution. Some bacteria exposed to the nanotopographies display membrane rupture, cytosolic leakage, and multivesicular body formation, indicating severe stress responses. XANES cryo-spectromicroscopy and linear absorption coefficient analysis identify a bacterial subpopulation with increased intracellular calcium, correlating with calcium release from the substrate and confirmed by confocal microscopy. However, this calcium accumulation does not affect viability, consistent with the halotolerant nature of B. subtilis. These findings provide insights into the combined effects of nanotopography and surface chemistry on bacterial responses., The authors are grateful to Andrea Sorrentino for his contributions to the experimental methodology and validation of the results, Jessica do Nascimento Faria da Souza for cryo-SXT sample preparation, Isaac López Insa for FE-SEM image acquisition of bacterial samples, and Pablo Guardia for providing access to TEM imaging. Cryo-SXT experiments were performed at the BL09 Mistral beamline at ALBA Synchrotron with the collaboration of ALBA staff. This work was supported by the European Research Council (ERC; grant agreement number 101055053 [BAMBBI]). The research group is part of the Maria de Maeztu Units of Excellence Programme CEX2023-001300-M/ funded by MCIN/AEI/10.13039/501100011033, Spanish Ministry of Science and Innovation. M.I.F. acknowledges the FPI-MEC scholarship under the PID2019−103892RB-I00 project, and M.P.G. the ICREA Academia award by the Generalitat de Catalunya., 3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Optimizing electro-responsive glyoxal-crosslinked alginate hydrogel for the electrochemical detection of NADH and antibacterial activity in smart dressing biointerfaces

  • Sanz Farnós, Júlia|||0000-0002-7768-3458
  • Ruiz Sorribas, Albert|||0000-0002-4497-1138
  • Pérez Madrigal, Maria del Mar|||0000-0002-2498-8485
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Alginate-based hydrogels have attracted considerable attention as scaffolds for wound dressing. In this work, the formulation of an electroactive alginate hydrogel, covalently crosslinked with glyoxal to enhance its stability, was optimized to obtain a multi-tasking scaffold. The optimized hydrogel not only preserves the mechanical softness characteristic of alginate scaffolds but also inhibits bacterial proliferation and functions as an efficient electrochemical sensor capable of detecting bacterial growth in real time. The best performing hydrogel was prepared from a mixture containing 2.6 wt% sodium alginate solution and 20 wt% poly(3,4-ethylenedioxythiophene):polystyrene sulfonic acid (relative to sodium alginate). The system is physically crosslinked using 3 wt% CaCl2 aqueous solution and, subsequently, covalently crosslinked with a 5 wt% glyoxal solution by applying a glyoxalization time of 60 min. The optimized hydrogel enables the quantification of nicotinamide adenine dinucleotide (NADH) over a linear range of up to 10 mM. This sensing capability was successfully applied to the detection of Escherichia coli and Staphylococcus aureus in culture media. Furthermore, the unreacted glyoxal infiltrated within the double-network matrix confers bactericidal properties to the hydrogels without apparently compromising its biocompatibility, as demonstrated using fibroblast cells. Beyond the intrinsic advantages of alginate as biocompatible wound dressing material, optimization of the semi-interpenetrating PEDOT network and the glyoxal crosslinking processes enabled the incorporation of additional functionalities, including NADH sensing for the detection of early bacterial infection and antibacterial activity. Overall, the optimized hydrogels represent promising candidates for use as multifunctional scaffolds in skin wound repair., This work was supported by the I + D + i project PID2021-125767OB-I00, PID2024-157506OB-I00 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, as well as the ERC grant BAMBBI, 101055053 funded by the European Union. Authors are thankful to the Agència de Gestió d'Ajuts Universitaris i de Recerca (2021 SGR 00387 and 2021 SGR 01368) for financial support. Support for the research of M.P.G. and C.A. was also received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Calcium-deficient hydroxyapatite as a bone graft material: From hydrated-layer chemistry to clinical performance

  • Bohner, Marc
  • Dobelin, Nicola
  • DROUET, CHRISTOPHE
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • MAAZOUZ, YASSINE
  • Marchat, David
Calcium-deficient hydroxyapatite (CDHA) is a widely studied calcium phosphate biomaterial due to its chemical similarity to bone mineral and its relevance as a bone graft substitute. This review presents a comprehensive analysis of CDHA's structure, composition, physico-chemical properties, synthesis methods, and biological performance. Attention is given to the material’s multiphasic nature, consisting of a crystalline core and an amorphous hydrated surface layer, and to how this structural-chemical duality governs CDHA's thermal stability, mechanical behavior, solubility, and ion exchange capacity. Various synthesis routes, including aqueous precipitation, hydrolysis, and cementitious reactions, are examined with respect to their impact on particle morphology and clinical applicability. Biological performance is assessed through in vitro and in vivo studies, highlighting CDHA's biocompatibility, osteoconductivity, osteoinductivity, and resorption mechanisms. Challenges such as precise compositional characterization and the dynamic behavior of the hydrated surface layer are addressed, underscoring the need for further research. Overall, CDHA stands out as a promising and versatile material for bone substitution, with significant potential for future developments in regenerative medicine and beyond., The authors thank Farida Elahrouni for the preparation of Fig. 3. This work was supported by the European Research Council (project 101055053) and the Agencia Estatal de Investigación (project CEX2023-001300-M / funded by MCIN/AEI /10.13039/501100011033).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

High-aspect-ratio nanostructured hydroxyapatite: towards new functionalities for a classical material

  • Díez Escudero, Anna|||0000-0003-4686-9564
  • Español Pons, Montserrat|||0000-0001-7510-0602
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation. Recently, much interest has been given to controlling the aspect ratio of hydroxyapatite crystals from bulk samples. The ability to exert control over the aspect ratio may revolutionize the applications of these materials towards new functional materials. Controlling the shape, size and orientation of HA crystals allows obtaining high aspect ratio structures, improving several key properties of HA materials such as molecule adsorption, ion exchange, catalytic reactions, and even overcoming the well-known brittleness of ceramic materials. Regulating the morphogenesis of HA crystals to form elongated oriented fibres has led to flexible inorganic synthetic sponges, aerogels, membranes, papers, among others, with applications in sustainability, energy and catalysis, and especially in the biomedical field., This project has received funding from the European Research Council (ERC), grant agreement number 101055053 (BAMBBI). Maria-Pau Ginebra acknowledges the support received through the ICREA Academia Award for excellence in research, funded by the Generalitat de Catalunya. Montserrat Espanol acknowledges the support from Generalitat de Catalunya through the Serra Hunter program, and Anna Diez-Escudero acknowledges the Spanish Ministry of Universities for the support received through the Maria Zambrano fellowship., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Electroresponsive hyaluronic acid click hydrogels for combined antibacterial delivery and wound healing applications

  • Haro Gutiérrez, Pilar Adriana
  • Sanz Farnós, Júlia|||0000-0002-7768-3458
  • Ahumada Castillo, Juan Carlos Esteban|||0000-0003-4538-1890
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Pérez Madrigal, Maria del Mar|||0000-0002-2498-8485
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
The versatility of electroresponsive hyaluronic acid (HA)-based hydrogels, a promising platforms for wound healing, can be further extended to controlled drug delivery, enabling on-demand release of therapeutic agents. This work reports the development of advanced HA-based electroresponsive hydrogels incorporating electrospun poly(lactic acid) (PLA) fiber mats functionalized with conducting polymers (CPs), such as poly(hydroxymethyl-3,4-ethylenedioxythiophene) and polypyrrole, and loaded with chloramphenicol (CAM). The systems were fabricated through a multi-step approach involving plasma treatment, in situ polymerization of CPs on the fiber mats, and then semi-interpenetration with CP within a click-chemistry crosslinked HA network. The resulting hybrid hydrogels exhibited suitable mechanical properties, swelling behavior, and electrochemical activity, enabling CAM release under both passive and controlled electrically stimulated conditions while maintaining biocompatibility. Electrical stimulation significantly enhanced the initial burst release, while the subsequent release phase showed a sustained profile over an extended period (11 days). The antibacterial activity of the released CAM was confirmed against E. coli and S. aureus using an agar diffusion assay. Although both CPs exhibited comparable CAM release behavior, the polypyrrole-based hydrogel demonstrated superior wound healing performance. Overall, these findings highlight the potential of electroresponsive HA-based composite hydrogels as smart wound dressings capable of controlled and sustained antibiotic delivery., This work was supported by the I+D+i project PID2021-125767OB-I00, PID2024-157506OB-I00 and CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033, as well as the ERC grant BAMBBI, 101055053 funded by the European Union. Authors are thankful to the Agència de Gestió d'Ajuts Universitaris i de Recerca (2021 SGR 00387 and 2021 SGR 01368) for financial support. Support for the research of M.P.G. and C.A. was also received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya. P.A.H.-G. thanks CONACYT (México) for the financial support through a postgraduate scholarship (836603 CVU 347614).
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Strategic advances in vat photopolymerization for 3D printing of calcium phosphate-based bone scaffolds: a review

  • Fagotto Clavijo, Roberto|||0000-0001-6586-7922
  • Lodoso Torrecilla, Irene|||0000-0003-1849-5243
  • Díez Escudero, Anna|||0000-0003-4686-9564
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
3D-printing has emerged as a leading technology for fabricating personalized scaffolds for bone regeneration. Among the 3D-printing technologies, vat photopolymerization (VP) stands out for its high precision and versatility. It enables the creation of complex, patient-specific scaffolds with advanced pore architectures that enhance mechanical stability and promote cell growth, key factors for effective bone regeneration. This review provides an overview of the advances made in vat photopolymerization printing of calcium phosphates, covering both the fabrication of full ceramic bodies and polymer-calcium phosphate composites. The review examines key aspects of the fabrication process, including slurry composition, architectural design, and printing accuracy, highlighting their impact on the mechanical and biological performance of 3D-printed scaffolds. The need to tailor porosity, pore size, and geometric design to achieve both mechanical integrity and biological functionality is emphasized by a review of data published in the recent literature. This review demonstrates that advanced geometries like Triply Periodic Minimal Surfaces and nature-inspired designs, achievable with exceptional precision by this technology, enhance mechanical and osteogenic performance. In summary, VP's versatility, driven by the diversity of material options, consolidation methods, and precision opens new horizons for scaffold-based bone regeneration., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupa­ment per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Strontium and gallium doping enhances in vivo bone regeneration in biomimetic hydroxyapatite 3D-printed scaffolds

  • Lodoso Torrecilla, Irene|||0000-0003-1849-5243
  • Moreno Duarte, Daniel|||0000-0002-9088-3112
  • Ciucci, Gaël
  • Mateu Sanz, Miguel|||0000-0001-5117-6071
  • Yoon, Jiyoung|||0009-0003-0999-7716
  • Jiménez Piqué, Emilio|||0000-0002-6950-611X
  • Franch, Jordi
  • Manzanares, Maria Cristina
  • Konka, Joanna Magdalena|||0000-0001-6593-8532
  • Español Pons, Montserrat|||0000-0001-7510-0602
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Doping of calcium phosphates (CaPs) with bioinorganic ions is a widely used strategy to enhance their biological performance in bone regeneration. However, conventional methods for ionic incorporation in CaP scaffolds often require high-temperature treatments or involve multiple complex steps. Here, we present two simple strategies to dope 3D-printed CaP scaffolds via incorporation of ions into the apatitic phase during the hydrolysis of a-tricalcium phosphate (a-TCP) to calcium deficient hydroxyapatite (CDHA). In the first strategy, ions were incorporated directly into the printing ink, whereas in the second, undoped robocasted scaffolds were immersed in ionic solutions, allowing ion incorporation into precipitated CDHA during phase transformation. We investigated several ions, including strontium (Sr2+), magnesium (Mg2+), silicon (SiO44¿ ) and gallium (Ga3+). Sr2+ and Ga3+ were successfully incorporated into the scaffolds, either by direct ink doping (Sr2+) or by soaking in ionic solutions (Sr2+ and Ga3+). Direct incorporation of Sr2+ in the ink resulted in a higher ion loading and release, enhancing bone formation and bone quality, as evidenced by increased mineral-to-matrix ratio and Young's modulus, as well as osteoinductive properties relative to non-doped scaffolds. Furthermore, we demonstrated for the first time the osteoinductive capacity of Ga3+ in an ectopic in vivo model., 3 - Salut i Benestar
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Biomineralization-inspired tuning of hydroxyapatite nanostructures: Decoupling topography and material effects on antimicrobial properties

  • Grzelak, Jan Jacek|||0000-0002-8404-0389
  • Yoon, Jiyoung|||0009-0003-0999-7716
  • Bueso-Inchausti Garcia, Ines
  • Cloeren, Anna
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
Bacterial infections remain a major complication in orthopedic and maxillofacial surgery, particularly when associated with biomaterial surfaces, where they become exceedingly difficult to eradicate. Inspired by naturally occurring biocidal surface topographies, nanostructured surfaces have emerged as promising strategies for reducing the risk of infection. In this study, we investigated the potential for fine-tuning the nanostructures of calcium-deficient hydroxyapatite (CDHA) by adjusting the reaction conditions during the hydrolysis of a-tricalcium phosphate. By systematically varying synthesis parameters, including temperature, pH, duration, and nucleation seed, we generated a diverse set of nanostructured topographies. From these, three morphologies were selected: interconnected nanosheets, densely packed needles, and nest-like nanowire structures. Analogous nanotopographies were replicated in titanium oxide (TiO2) to isolate topographical from material-specific antimicrobial effects. All nanostructured surfaces exhibited significant bactericidal activity against P. aeruginosa. However, while needle- and nest-like topographies showed comparable efficacy across both materials, the lower elastic modulus of CaP pits resulted in reduced antibacterial performance compared to their Ti counterparts for both P. aeruginosa and S. aureus. Overall, the needle-like topographies demonstrated the highest antibacterial efficacy across all tested surfaces. Against S. aureus, no evidence of cell wall damage was found; however, metabolic assays revealed a significantly reduced activity, especially in needle-like topographies, where a reduction of Colony Forming Units (CFU) was also observed, suggesting a subtler, potentially indirect bactericidal mechanism. Our results demonstrate that a range of mechanobactericidal nanotopographies can be engineered on calcium phosphate surfaces via controlled processing, offering a platform for antibiotic-free infection control in bone grafting applications., 3 - Salut i Benestar
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Direct ink writing of biomimetic hydroxyapatite scaffolds with tailored concave porosity

  • Mazo Barbara, Laura del
  • Díez Escudero, Anna
  • Lodoso Torrecilla, Irene
  • Aramesh, Morteza
  • Persson, Cecilia
  • Ginebra Molins, Maria Pau
Direct ink writing (DIW) is a promising technology for the fabrication of personalized bone grafts, as it enables the customization of their geometrical conformation with high reproducibility and is compatible with the use of self-setting calcium-deficient hydroxyapatite inks. However, the scaffolds obtained by DIW consist mostly of convex filaments, which is a limitation since concave surfaces are known to promote bone regeneration in vivo. In this work, we explore the use of triply periodic minimal surface (TPMS) designs in DIW of calcium phosphate self-hardening inks as a strategy to obtain scaffolds with controlled concave macropores. The limitations of the printing parameters with high ceramic-loaded inks using DIW resulted in only 20% nominal porosity for gyroid-, diamond-, and Schwarz-based structures. The inherent layered pores from TPMS geometries enabled concavities typically unattainable via DIW, bearing substantial implications for subsequent osteoinductive capabilities. Although the mechanical properties were lower in the TPMS-based scaffolds than in the orthogonal patterned ones, the blood permeability of TPMS-based structures was higher. The concave pore architecture enhanced the osteogenic potential of the biomimetic ceramic, increasing SaOs-2 cell adhesion, proliferation, differentiation, and mineralization., This work was supported by the European Research Council (ERC; grant agreement number 101055053 [BAMBBI]), the Spanish Ministry of Science and Innovation (project PID2019-103892RB-I00/AEI/ 10.13039/501100011033 and FPU scholarship of L.d.M.B), and by AM4Life Competence Centre in Additive Manufacturing for the Life Sciences through Sweden’s Innovation Agency VINNOVA (project number 2019-00029). This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MCIN/AEI / 10.13039/501100011033. A.D.E. acknowledges the Spanish Ministry of Universities for support through the Maria Zambrano fellowship and M.P.G the Generalitat de Catalunya for the ICREA Academia Award., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Strontium and gallium doping enhances in vivo bone regeneration in biomimetic hydroxyapatite 3D-printed scaffolds

  • Lodoso Torrecilla, Irene
  • Moreno Duarte, Daniel
  • Ciucci, Gaël
  • Mateu Sanz, Miguel
  • Yoon, Jiyoung
  • Jiménez Piqué, Emilio
  • Franch, Jordi
  • Manzanares, Maria Cristina
  • Konka, Joanna Magdalena
  • Español Pons, Montserrat
  • Ginebra Molins, Maria Pau
Doping of calcium phosphates (CaPs) with bioinorganic ions is a widely used strategy to enhance their biological performance in bone regeneration. However, conventional methods for ionic incorporation in CaP scaffolds often require high-temperature treatments or involve multiple complex steps. Here, we present two simple strategies to dope 3D-printed CaP scaffolds via incorporation of ions into the apatitic phase during the hydrolysis of a-tricalcium phosphate (a-TCP) to calcium deficient hydroxyapatite (CDHA). In the first strategy, ions were incorporated directly into the printing ink, whereas in the second, undoped robocasted scaffolds were immersed in ionic solutions, allowing ion incorporation into precipitated CDHA during phase transformation. We investigated several ions, including strontium (Sr2+), magnesium (Mg2+), silicon (SiO44¿ ) and gallium (Ga3+). Sr2+ and Ga3+ were successfully incorporated into the scaffolds, either by direct ink doping (Sr2+) or by soaking in ionic solutions (Sr2+ and Ga3+). Direct incorporation of Sr2+ in the ink resulted in a higher ion loading and release, enhancing bone formation and bone quality, as evidenced by increased mineral-to-matrix ratio and Young's modulus, as well as osteoinductive properties relative to non-doped scaffolds. Furthermore, we demonstrated for the first time the osteoinductive capacity of Ga3+ in an ectopic in vivo model., 3 - Salut i Benestar, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Strategic advances in vat photopolymerization for 3D printing of calcium phosphate-based bone scaffolds: a review

  • Fagotto Clavijo, Roberto
  • Lodoso Torrecilla, Irene
  • Díez Escudero, Anna
  • Ginebra Molins, Maria Pau
3D-printing has emerged as a leading technology for fabricating personalized scaffolds for bone regeneration. Among the 3D-printing technologies, vat photopolymerization (VP) stands out for its high precision and versatility. It enables the creation of complex, patient-specific scaffolds with advanced pore architectures that enhance mechanical stability and promote cell growth, key factors for effective bone regeneration. This review provides an overview of the advances made in vat photopolymerization printing of calcium phosphates, covering both the fabrication of full ceramic bodies and polymer-calcium phosphate composites. The review examines key aspects of the fabrication process, including slurry composition, architectural design, and printing accuracy, highlighting their impact on the mechanical and biological performance of 3D-printed scaffolds. The need to tailor porosity, pore size, and geometric design to achieve both mechanical integrity and biological functionality is emphasized by a review of data published in the recent literature. This review demonstrates that advanced geometries like Triply Periodic Minimal Surfaces and nature-inspired designs, achievable with exceptional precision by this technology, enhance mechanical and osteogenic performance. In summary, VP's versatility, driven by the diversity of material options, consolidation methods, and precision opens new horizons for scaffold-based bone regeneration., Peer Reviewed, Objectius de Desenvolupament Sostenible::3 - Salut i Benestar, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura, Objectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupa­ment per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

High-aspect-ratio nanostructured hydroxyapatite: towards new functionalities for a classical material

  • Díez Escudero, Anna
  • Español Pons, Montserrat
  • Ginebra Molins, Maria Pau
Hydroxyapatite-based materials have been widely used in countless applications, such as bone regeneration, catalysis, air and water purification or protein separation. Recently, much interest has been given to controlling the aspect ratio of hydroxyapatite crystals from bulk samples. The ability to exert control over the aspect ratio may revolutionize the applications of these materials towards new functional materials. Controlling the shape, size and orientation of HA crystals allows obtaining high aspect ratio structures, improving several key properties of HA materials such as molecule adsorption, ion exchange, catalytic reactions, and even overcoming the well-known brittleness of ceramic materials. Regulating the morphogenesis of HA crystals to form elongated oriented fibres has led to flexible inorganic synthetic sponges, aerogels, membranes, papers, among others, with applications in sustainability, energy and catalysis, and especially in the biomedical field., This project has received funding from the European Research Council (ERC), grant agreement number 101055053 (BAMBBI). Maria-Pau Ginebra acknowledges the support received through the ICREA Academia Award for excellence in research, funded by the Generalitat de Catalunya. Montserrat Espanol acknowledges the support from Generalitat de Catalunya through the Serra Hunter program, and Anna Diez-Escudero acknowledges the Spanish Ministry of Universities for the support received through the Maria Zambrano fellowship., Peer Reviewed, Postprint (published version)