Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Model generation architecture for digital twins and deployment system

  • Vázquez Novoa, Fernando
  • Conejero Bañón, Francisco Javier
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
A Digital Twin is a virtual copy or representation of a physical object. Given the same input, both should produce the same output. A bidirectional data exchange between both of them should keep the objects in the same state by automatically reflecting changes from one of the objects to the other. Despite the popularity of the topic, there is a lack of standardization and no widespread adoption of techniques or architectures, resulting in ad-hoc implementations for each use case. This paper proposes a methodology for the generation of digital twins based on the definition of their life cycle, with phases that include training, operation and retraining. To allow efficient management of resources, each phase of the Digital Twin is implemented as a PyCOMPSs workflow. The proposed methodologies and architectures aims to simplify and strengthen the design and development of digital twins. It also allows for the extension of existing ones, the replacement of their components with more advanced ones, and the support of their reuse. We also consider workflow deployment, which is often a difficult task requiring specialized personnel and time. This article focuses on presenting the training phase of a Digital Twin life-cycle and demonstrates its operation by applying it to two real-world use case scenarios in ongoing projects. The use of the proposal led to a simplification of the developed code, allowed a distribution of the computational work among the available resources in a user-agnostic manner and the digital models created faithfully represent the physical object. Additionally, the paper presents the design of the operating life-cycle phase of a Digital Twin., Author Fernando Vázquez is supported by PRE2022-104134 funded by MICIU/AEI /10.13039/501100011033 and by the FSE+. This work has been partially funded by the the projects PID2019- 107255GB, CEX2021-001148-S, and PID2023-147979NB-C21 from the MCIN/AEI and MICIU/AEI /10.13039/501100011033 and by FEDER, UE, and by the Departament de Recerca i Universitats de la Generalitat de Catalunya, research group MPiEDist (2021 SGR 00412), and by the European Commission through the program Horizon 2020 and the European High-Performance Computing Joint Undertaking (JU) with contract 955558 and by the MCIN/AEI/10.13039/501100011033 y European Union NextGenerationEU/PRTR (PCI2021-121957), project eFlows4HPC; as well as by the European Commission under program Horizon Action under contract 101056886 (CAELESTIS). This work has also received funding from the European High Performance Computing Joint Undertaking (JU) and Spain, Italy, Iceland, Germany, Norway, France, Finland and Croatia under grant agreement No 101093038., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Model generation architecture for digital twins and deployment system

  • Vázquez Novoa, Fernando
  • Conejero Bañón, Francisco Javier
  • Badia Sala, Rosa Maria
A Digital Twin is a virtual copy or representation of a physical object. Given the same input, both should produce the same output. A bidirectional data exchange between both of them should keep the objects in the same state by automatically reflecting changes from one of the objects to the other. Despite the popularity of the topic, there is a lack of standardization and no widespread adoption of techniques or architectures, resulting in ad-hoc implementations for each use case. This paper proposes a methodology for the generation of digital twins based on the definition of their life cycle, with phases that include training, operation and retraining. To allow efficient management of resources, each phase of the Digital Twin is implemented as a PyCOMPSs workflow. The proposed methodologies and architectures aims to simplify and strengthen the design and development of digital twins. It also allows for the extension of existing ones, the replacement of their components with more advanced ones, and the support of their reuse. We also consider workflow deployment, which is often a difficult task requiring specialized personnel and time. This article focuses on presenting the training phase of a Digital Twin life-cycle and demonstrates its operation by applying it to two real-world use case scenarios in ongoing projects. The use of the proposal led to a simplification of the developed code, allowed a distribution of the computational work among the available resources in a user-agnostic manner and the digital models created faithfully represent the physical object. Additionally, the paper presents the design of the operating life-cycle phase of a Digital Twin., Author Fernando Vázquez is supported by PRE2022-104134 funded by MICIU/AEI /10.13039/501100011033 and by the FSE+. This work has been partially funded by the the projects PID2019- 107255GB, CEX2021-001148-S, and PID2023-147979NB-C21 from the MCIN/AEI and MICIU/AEI /10.13039/501100011033 and by FEDER, UE, and by the Departament de Recerca i Universitats de la Generalitat de Catalunya, research group MPiEDist (2021 SGR 00412), and by the European Commission through the program Horizon 2020 and the European High-Performance Computing Joint Undertaking (JU) with contract 955558 and by the MCIN/AEI/10.13039/501100011033 y European Union NextGenerationEU/PRTR (PCI2021-121957), project eFlows4HPC; as well as by the European Commission under program Horizon Action under contract 101056886 (CAELESTIS). This work has also received funding from the European High Performance Computing Joint Undertaking (JU) and Spain, Italy, Iceland, Germany, Norway, France, Finland and Croatia under grant agreement No 101093038., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Micromechanical analysis of composite materials considering material variability and microvoids

  • Vallmajó Martín, Oriol
  • Arteiro, Albertino
  • Guerrero Garcia, José Manuel
  • Melro, A.R.
  • Pupurs, Andrejs
  • Turon Travesa, Albert
One of the main challenges for fiber-reinforced polymers (FRP) is the difficulty to predict their mechanical behavior. At the microscale, the properties of the constituents, their spatial distribution and the defects arising from manufacturing affect the mechanical behavior. In this work, statistically representative volume elements (SRVEs) are proposed based on a micromechanical finite element model to determine the effect of content, distribution and size of microstructural defects and, material uncertainties on the elastic mesoscale properties of FRPs. To that end, different cylindrical void sizes are considered as well as irregular shaped voids between fiber tows (inter-fiber voids). Fibers and voids are randomly distributed in a SRVE. An uncertainty quantification and management analysis is employed to obtain statistical descriptors of the effective mesoscale mechanical properties of FRPs. The results obtained are compared with analytical models. It is demonstrated that, for carbon fiber/epoxy composites, SRVEs with lateral dimensions equivalent to 15 times the average fiber diameter and a length of 0.01 mm along the longitudinal direction remain statistically representative with or without the presence of voids. The results show that the presence of voids reduces the transverse and shear elastic properties of FRPs. The smaller the voids are, the bigger is the reduction. Regarding the presence of inter-fiber voids, the reduction is lower. This trend is well predicted by the Mori–Tanaka mean field theory. However, the relative difference between the numerical and the analytical predictions increases for high void volume fractions. Regarding the effective longitudinal Young’s modulus, the rule of mixtures, the Mori–Tanaka mean field theory and the concentric cylinder assembly model provide similar predictions for the mean value, but the uncertainty is overestimated by the analytical models because the properties of the fibers take a single value for each calculation with the analytical model, while they more realistically change from fiber to fiber in the numerical SRVEs, OV acknowledges the support of the Catalan Government, under the Grant 2020FI B2 00110. AT and OV gratefully acknowledge the funding of the Project RTI, United States 2018-099373-B-100, co-financed by the Spanish Government (Ministerio de Economia Competitividad) and the European Social Fund. AT acknowledges the Generalitat de Catalunya for the ICREA Academia prize 2022. This work has been conducted within the framework of the CAELESTIS project, funded by the European Climate, Infrastructure and Environment Executive Agency (CINEA) under grant agreement No. 101056886. J.M. Guerrero would also like to acknowledge the funding of the post-doc grant Margarita Salas with reference REQ2021-A-15, financed by the Spanish ”Ministerio de Universidades ” and the European Union - Next GenerationEU, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Effect of ply misalignment on the notched strength of composite laminates

  • Vallmajó Martín, Oriol
  • Descamps Arbat, Martí
  • Arteiro, Albertino
  • Turon Travesa, Albert
Predicting the notched strength of carbon fiber-reinforced polymers is a crucial aspect of composite structure design, particularly when considering the uncertainties stemming from geometric features, material variability and defects. This study focuses on the influence of ply misalignment at the meso-scale level. The research employs a comprehensive methodology to establish notched strength allowables, integrating analytical (low fidelity), which have limitations in the representation of stacking sequence effects and in the generation of ply misalignments, and computational tools (high fidelity), employing a finite element model (FEM). The investigation emphasizes the need for a holistic understanding of these factors to enhance the accuracy of predictions. The results predicted by the analytical and, specially, the numerical models are in good agreement with experimental results. Both models underscore the decrease of the notched strength due to ply misalignment. Finally, a hybrid approach is proposed given that FEM predictions offer more accuracy and a detailed comprehension of the failure mechanisms, while fast analytical models can be used to propagate the uncertainties and to determine the allowables, OV acknowledges the support of the Catalan Government, under the Grant 2020FI B2 00110. AT and OV gratefully acknowledge the funding of the Project RTI 2018-099373-B-100, co-financed by the Spanish Government (Ministerio de Economia Competitividad) and the European Social Fund. AT acknowledges the Generalitat de Catalunya for the ICREA Academia prize 2022. This work has been conducted within the framework of the CAELESTIS project, funded by the European Climate, Infrastructure and Environment Executive Agency (CINEA) under grant agreement No. 101056886. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9