Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructured Thick Electrode Strategies toward Enhanced Electrode–Electrolyte Interfaces

  • Pokhriyal, Anukriti
  • González-Gil, Rosa M.
  • Bengoa, Leandro N.
  • Gómez-Romero, P.
This article addresses the issue of bulk electrode design and the factors limiting the performance of thick electrodes. Indeed, one of the challenges for achieving improved performance in electrochemical energy storage devices (batteries or supercapacitors) is the maximization of the ratio between active and non-active components while maintaining ionic and electronic conductivity of the assembly. In this study, we developed and compared supercapacitor thick electrodes using commercially available carbons and utilising conventional, easily scalable methods such as spray coating and freeze-casting. We also compared different binders and conductive carbons to develop thick electrodes and analysed factors that determine the performance of such thick electrodes, such as porosity and tortuosity. The spray-coated electrodes showed high areal capacitances of 1428 mF cm−2 at 0.3 mm thickness and 2459 F cm−2 at 0.6 mm thickness., This research was funded by the Spanish MICINN, the State Research Agency (AEI) and the European Regional Development Fund (FEDER) (Project Nanopeistorage PID2021-128390OB-I00), and by H2020-MSCA-COFUND-2016, DOC-FAM, Grant Agreement No. 754397. The ICN2 is supported by the Severo Ochoa Centres of Excellence programme (Grant SEV-2017-0706 and CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), This work has been carried out within the framework of the doctoral program (PhD) of Material Science of Universitat Autònoma de Barcelona (UAB). L.N.B. acknowledges funding from Horizon-TMA-MSCA-PF-EF (ref 101062498)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hybrid Materials: A Metareview

  • Gómez-Romero, P.
  • Pokhriyal, Anukriti
  • Rueda-García, Daniel
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
Published as part of Chemistry of Materials virtual special issue “In Honor of Prof. Clement Sanchez”, The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle’s eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigación (AEI) and the European Regional Development Fund (FEDER) (grant PID2021-128390OB-I00, TED2021-130205B-C21, and PLEC2022-009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033. L.N.B. acknowledges funding from the Marie S Curie Program MSCA-PF-EF Grant number 101062498. This work has been carried out within the framework of doctoral program (PhD) of Material Science (Department of Physics) of Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the role of additives on the electrochemistry and performance of Zn energy storage sevices

  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
  • Gómez-Romero, P.
As the interest in alternative Li-based energy storage technologies increased during the last years, zinc emerged as a promising candidate. Despite several advantages over Li, Zn cycling stability is still a major issue. In this article, the use of near-neutral electrolytes (non-expensive 2 M ZnSO4) with the addition of different additives (dimethylsulfoxide and tetratethylammonium chloride) is proposed as a solution. The Zn deposition/dissolution electrochemistry has been evaluated and the cycling stability was determined in Zn//Zn symmetric coin-cells. Hybrid supercapacitors were also assembled and tested in a range of 0.2 V–1.8 V for 2000 cycles, using activated carbon electrodes as cathode and Zn foil as anode. The results show that dimethylsulfoxide strongly inhibits the Zn deposition process, evidenced by a decrease in the cathodic current density, as well as in the dissolution peak. DMSO affects the deposition mechanism, whereas tetratethylammonium chloride reduces the exchange current density, consistent with the adsorption of tetraethylammonium ions on the Zn surface. A synergy between both additives leading to further inhibition of Zn2+ reduction is observed allowing cycling up to 250 hours for Zn//Zn devices. In addition, the performance of hybrid supercapacitors has also improved showing better capacity and extended cycle life., The authors would like to acknowledge the financial support provided by Ministerio de Ciencia y Innovacion (MCIIN), the Agencia Estatal de Investigacion (AEI) and NextGenerationEU (TED2021-130205B-C2) for this research activity. L.N. Bengoa wants to thank the European Union for providing a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB) to join ICN2. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021-001214-S, funded by MCIN/AEI/10.13039.501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimization of porous carbon structure through high-temperature pyrolysis for enhanced electrochemical performance of supercapacitors

  • Wang, Lipeng
  • Chen, Siyu
  • Bengoa, Leandro N.
  • González-Gil, Rosa M.
  • Gómez-Romero, P.
Herein, phosphoric acid activation followed by high-temperature pyrolysis is employed to synthesize high-performance porous carbon materials using sustainable biomass (almond shells) as the precursor. The almond shell-derived porous carbon materials exhibited a large specific surface area (1164/1395 m²/g) and high pore volume (1.39/1.40 cm³/g). After high-temperature pyrolysis at 1000°C, the biomass-derived porous carbon material AC600(1000) exhibited a larger average pore size with a hierarchical pore structure (micropores-mesopores). AC600(1000) also possessed more graphite domain structures, defects, and abundant surface oxygen-containing functional groups. In a symmetric cell configuration with 6 M KOH electrolyte, the optimized AC600(1000) operates stably over a wide voltage range (0-1.5 V), demonstrating a high specific capacitance of 142.15 F/g at 0.5 A/g. It also exhibites excellent rate performance, retaining a high specific capacitance of 106.38 F/g even at 20 A/g (74.83% capacitance retention), while the unoptimized AC600 achieved only 45.66 F/g (35.48% capacitance retention). Furthermore, it preserved 88.4% of its initial capacitance after 20,000 cycles at a current density of 5 A/g (almost 100% coulombic efficiency). This study shows proper synthetic routes that can boost significantly the performance of biomass derived carbons for supercapacitors, providing insights into structure-electrochemistry correlation. Thus, a sustainable and scalable production of carbon materials from biomass for energy storage applications is presented, which could promote the use of these materials on an industrial scale., Funding from Ministerio de Ciencia Innovacion y Universidades (MCIU), Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER) (Grant PID2021–128390OB-I00, TED2021–130205B-C21, and PLEC2022–009328) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/ 10.13039.501100011033. This work has been carried out within the framework of doctoral program (PhD) of Material Science at Universitat Autonoma de Barcelona (UAB) (Lipeng WANG). L.P. Wang also acknowledges his scholarship (No. 202206420015) under China Scholarship Council. L.N. Bengoa thanks the support provided by Horizon Europe programme through a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB). Authors want to thank ICN2 and ICMAB core facilities., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of mass loading and current collector choice on self-discharge in environmentally-friendly supercapacitors

  • Thomas, Sharin Maria
  • Bengoa, Leandro N.
  • Pokhriyal, Anukriti
  • Rueda-García, Daniel
  • González-Gil, Rosa M.
  • Gómez-Romero, P.
A comparative study of self-discharge in eco-friendly, carbon-based supercapacitors was conducted using ethyl cellulose (EC) as a sustainable cellulose-derived binder and a neutral aqueous electrolyte (1 M Na2SO4). The influence of current collector, mass loading and electrochemical active surface area (ECSA) on self-discharge was examined using three types of current collectors over a range of operating voltages. Self-discharge behaviour was analysed from open-circuit voltage (OCV) decay, leakage current and hybrid model fitting, revealing diffusion controlled self-discharge as the dominant contribution under tested conditions. The magnitude of self-discharge is strongly influenced by the type of current collector whilst the effects of ECSA and electrode loading are mediated with respect to their influence on interfacial properties. These findings highlight the importance of electrode architecture and interfacial properties in regulating voltage retention and leakage current. This is particularly relevant for supercapacitors operating under intermittent charging conditions or long resting periods as in case of integration with low-power energy-harvesting devices such as triboelectric nanogenerators. This work provides insights into design of sustainable aqueous supercapacitors for effective charge retention and reliable delivery, potentially suitable for low-power, self-powered applications., Funding from Ministerio de Ciencia e Innovación y Universidades (MCIU), Agencia Estatal de Investigacion (AEI) and the European Regional Development Fund (FEDER) (Grant PID2024-157199OB-C21) are gratefully acknowledged. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa Centres of Excellence programme, Grant CEX2021–001214-S, funded by MCIN/AEI/10.13039.501100011033. This work has been carried out within the framework of doctoral program (PhD) of Material Science at Universitat Autonoma de Barcelona (UAB) (Sharin Maria THOMAS). L.N. Bengoa thanks the support provided by Horizon Europe programme through a Marie Curie Postdoctoral Fellowship (Grant 101062498-POMZAB). Authors want to thank ICN2 and ICMAB core facilities., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanostructured Thick Electrode Strategies toward Enhanced Electrode-Electrolyte Interfaces

  • Pokhriyal, Anukriti
  • González-Gil, Rosa Maria|||0000-0002-0913-9629
  • Bengoa, Leandro N.|||0000-0002-0608-8248
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
This article addresses the issue of bulk electrode design and the factors limiting the performance of thick electrodes. Indeed, one of the challenges for achieving improved performance in electrochemical energy storage devices (batteries or supercapacitors) is the maximization of the ratio between active and non-active components while maintaining ionic and electronic conductivity of the assembly. In this study, we developed and compared supercapacitor thick electrodes using commercially available carbons and utilising conventional, easily scalable methods such as spray coating and freeze-casting. We also compared different binders and conductive carbons to develop thick electrodes and analysed factors that determine the performance of such thick electrodes, such as porosity and tortuosity. The spray-coated electrodes showed high areal capacitances of 1428 mF cm at 0.3 mm thickness and 2459 F cm at 0.6 mm thickness.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hybrid Materials, A Metareview

  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Pokhriyal, Anukriti
  • Rueda García, Daniel|||0000-0003-3539-1585
  • Bengoa, Leandro N.|||0000-0002-0608-8248
  • González-Gil, Rosa M.
The field of hybrid materials has grown so wildly in the last 30 years that writing a comprehensive review has turned into an impossible mission. Yet, the need for a general view of the field remains, and it would be certainly useful to draw a scientific and technological map connecting the dots of the very different subfields of hybrid materials, a map which could relate the essential common characteristics of these fascinating materials while providing an overview of the very different combinations, synthetic approaches, and final applications formulated in this field, which has become a whole world. That is why we decided to write this metareview, that is, a review of reviews that could provide an eagle's eye view of a complex and varied landscape of materials which nevertheless share a common driving force: the power of hybridization.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Understanding the Role of Additives on The Electrochemistry and Performance of Zn Energy Storage Devices

  • Bengoa, Leandro N.|||0000-0002-0608-8248
  • González-Gil, Rosa Maria|||0000-0002-0913-9629
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
As the interest in alternative Li-based energy storage technologies increased during the last years, zinc emerged as a promising candidate. Despite several advantages over Li, Zn cycling stability is still a major issue. In this article, the use of near-neutral electrolytes (non-expensive 2 M ZnSO) with the addition of different additives (dimethylsulfoxide and tetratethylammonium chloride) is proposed as a solution. The Zn deposition/dissolution electrochemistry has been evaluated and the cycling stability was determined in Zn//Zn symmetric coin-cells. Hybrid supercapacitors were also assembled and tested in a range of 0.2 V-1.8 V for 2000 cycles, using activated carbon electrodes as cathode and Zn foil as anode. The results show that dimethylsulfoxide strongly inhibits the Zn deposition process, evidenced by a decrease in the cathodic current density, as well as in the dissolution peak. DMSO affects the deposition mechanism, whereas tetratethylammonium chloride reduces the exchange current density, consistent with the adsorption of tetraethylammonium ions on the Zn surface. A synergy between both additives leading to further inhibition of Zn reduction is observed allowing cycling up to 250 hours for Zn//Zn devices. In addition, the performance of hybrid supercapacitors has also improved showing better capacity and extended cycle life.