Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Profiling the epigenome using long-read sequencing

  • Liu, Tianyuan
  • Conesa, Ana
The advent of single-molecule, long-read sequencing (LRS) technologies by Oxford Nanopore Technologies and Pacific Biosciences has revolutionized genomics, transcriptomics and, more recently, epigenomics research. These technologies offer distinct advantages, including the direct detection of methylated DNA and simultaneous assessment of DNA sequences spanning multiple kilobases along with their modifications at the single-molecule level. This has enabled the development of new assays for analyzing chromatin states and made it possible to integrate data for DNA methylation, chromatin accessibility, transcription factor binding and histone modifications, thereby facilitating comprehensive epigenomic profiling. Owing to recent advancements, alternative, nascent and translating transcripts can be detected using LRS approaches. This Review discusses LRS-based experimental and computational strategies for characterizing chromatin states and highlights their advantages over short-read sequencing methods. Furthermore, we demonstrate how various long-read methods can be integrated to design multi-omics studies to investigate the relationship between chromatin states and transcriptional dynamics., This work has been funded by the European Union Marie Skłodowska-Curie Actions Doctoral Network project LongTREC (HORIZON-MSCA-2021-DN-01 grant agreement project 101072892). This work was partially funded by the Spanish Science Ministry, grant number PID2020-119537RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Transcriptomics in the era of long-read sequencing

  • Monzó, Carolina
  • Liu, Tianyuan
  • Conesa, Ana
Transcriptome sequencing revolutionized the analysis of gene expression, providing an unbiased approach to gene detection and quantification that enabled the discovery of novel isoforms, alternative splicing events and fusion transcripts. However, although short-read sequencing technologies have surpassed the limited dynamic range of previous technologies such as microarrays, they have limitations, for example, in resolving full-length transcripts and complex isoforms. Over the past 5 years, long-read sequencing technologies have matured considerably, with improvements in instrumentation and analytical methods, enabling their application to RNA sequencing (RNA-seq). Benchmarking studies are beginning to identify the strengths and limitations of long-read RNA-seq, although there remains a need for comprehensive resources to guide newcomers through the intricacies of this approach. In this Review, we provide a comprehensive overview of the long-read RNA-seq workflow, from library preparation and sequencing challenges to core data processing, downstream analyses and emerging developments. We present an extensive inventory of experimental and analytical methods and discuss current challenges and prospects., The authors’ work has been funded by the European Union Marie Skłodowska-Curie Actions Postdoctoral Fellowship (HORIZON-MSCA-2023-PF-01-01 grant agreement project 101149931), the European Union Marie Skłodowska-Curie Actions Doctoral Network project LongTREC (HORIZON-MSCA-2021-DN-01 grant agreement project 101072892) and the Spanish Science Ministry, grant number PID2020-119537RB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward the use of nanopore RNA sequencing technologies in the clinic: challenges and opportunities

  • Katopodi, Xanthi-Lida
  • Begik, Oguzhan
  • Novoa, Eva Maria
RNA molecules have garnered increased attention as potential clinical biomarkers in recent years. While short-read sequencing and quantitative polymerase chain reaction have been the primary methods for quantifying RNA abundance, they typically fail to capture critical post-transcriptional regulatory elements, such as RNA modifications, which are often dysregulated in disease contexts. A promising cutting-edge technique sequencing method that addresses this gap is direct RNA sequencing, offered by Oxford Nanopore Technologies, which can simultaneously capture both RNA abundance and modification information. The rapid advancements in this platform, along with growing evidence of dysregulated RNA species in biofluids, presents a compelling clinical opportunity. In this review, we discuss the challenges and the emerging opportunities for the adoption of nanopore RNA sequencing technologies in the clinic, highlighting their potential to revolutionize personalized medicine and disease monitoring., We acknowledge support of the Spanish Ministry of Science and Innovation through the Centro de Excelencia Severo Ochoa (CEX2020-001049-S, MCIN/AEI /10.13039/501100011033), the Generalitat de Catalunya through the CERCA programme and to the EMBL partnership., This project has received funding from the European Union’s Horizon Europe under the grant agreement number 101072892, 101042103, and 101187456 (MSCA-2021-DN, ERC-2021-STG and ERC-2024-POC respectively, to E.M.N.). This work was supported by AECC Foundation (LABE211658NOVO to E.M.N.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001049-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

SQANTI-reads: a tool for the quality assessment of long read data in multi-sample lrRNA-seq experiments

  • Keil, Netanya
  • Monzó, Carolina
  • McIntyre, Lauren M.
  • Conesa, Ana
SQANTI-reads leverages SQANTI3, a tool for the analysis of the quality of transcript models, to develop a read-level quality control framework for replicated long-read RNA-seq experiments. The number and distribution of reads, as well as the number and distribution of unique junction chains (transcript splicing patterns), in SQANTI3 structural categories are informative of raw data quality. Multi-sample visualizations of QC metrics are presented by experimental design factors to identify outliers. We introduce new metrics for 1) the identification of potentially under-annotated genes and putative novel transcripts and for 2) quantifying variation in junction donors and acceptors. We applied SQANTI-reads to two different datasets, a Drosophila developmental experiment and a multi-platform dataset from the LRGASP project and demonstrate that the tool effectively reveals the impact of read coverage on data quality, and readily identifies strong and weak splicing sites. SQANTI-reads is open source and available for download at GitHub., This work was supported in part by a grant from the National Institutes of Health (1R21HG011280-01), the Spanish MICIN (PID2020-119537RB-I00), the European Union’s programme Horizon Europe under the Marie Skłodowska-Curie Actions postdoctoral fellowship to C.M. (101149931). This work is also supported in part by a grant from the National Cancer Institute (NCI P01 CA214091), the National Institute of General Medical Sciences (NIGMS GM137430), the University of Florida Department of Molecular Genetics and Microbiology, the University of Florida Genetics Institute, the University of Florida Cancer Center, and the University of Florida Research Computing Center (www.rc.ufl.edu) and the Latin American and Caribbean Scholars award to N.K. Part of the computations were performed on the high performance computing cluster Garnatxa at the Institute for Integrative Systems Biology (I2SysBio). I2SysBio is a joint research center formed by University of Valencia (UV) and Spanish National Research Council (CSIC). We acknowledge Ashley Myrick for help with some of the initial CV plots and Knife Bankole for the initial coding of the junction hash. Alison Morse prepared all samples and libraries for the Drosophila experiment, ran all initial QC analyses and recalled all the bases for ONT data. We acknowledge Rolf Renne for his support., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Long-read transcriptome sequencing of CLL and MDS patients uncovers molecular effects of SF3B1 mutations

  • Pacholewska, Alicja
  • Lienhard, Matthias
  • Brüggemann, Mirko
  • Hänel, Heike
  • Bilalli, Lorina
  • Königs, Anja
  • Heß, Felix
  • Becker, Kerstin
  • Köhrer, Karl
  • Kaiser, Jesko
  • Gohlke, Holger
  • Gattermann, Norbert
  • Hallek, Michael
  • Herling, Carmen D.
  • König, Julian
  • Grimm, Christina
  • Herwig, Ralf
  • Zarnack, Kathi
  • Schweiger, Michal R.
Mutations in splicing factor 3B subunit 1 (SF3B1) frequently occur in patients with chronic lymphocytic leukemia (CLL) and myelodysplastic syndromes (MDSs). These mutations have different effects on the disease prognosis with beneficial effect in MDS and worse prognosis in CLL patients. A full-length transcriptome approach can expand our knowledge on SF3B1 mutation effects on RNA splicing and its contribution to patient survival and treatment options. We applied long-read transcriptome sequencing (LRTS) to 44 MDS and CLL patients, as well as two pairs of isogenic cell lines with and without SF3B1 mutations, and found >60% of novel isoforms. Splicing alterations were largely shared between cancer types and specifically affected the usage of introns and 3' splice sites. Our data highlighted a constrained window at canonical 3' splice sites in which dynamic splice-site switches occurred in SF3B1-mutated patients. Using transcriptome-wide RNA-binding maps and molecular dynamics simulations, we showed multimodal SF3B1 binding at 3' splice sites and predicted reduced RNA binding at the second binding pocket of SF3B1K700E Our work presents the hitherto most-complete LRTS study of the SF3B1 mutation in CLL and MDS and provides a resource to study aberrant splicing in cancer. Moreover, we showed that different disease prognosises result most likely from the different cell types expanded during carcinogenesis rather than different mechanisms of action of the mutated SF3B1. These results have important implications for understanding the role of SF3B1 mutations in hematological malignancies and other related diseases., We acknowledge the IMB Genomics Core Facility and its NextSeq 500 sequencer (funded by the Deutsche Forschungsgemeinschaft [DFG, German Research Foundation] INST 247/870-1 FUGG). We thank Angelos Constantinou (IGH-Institute of Human Genetics, France) and Marc-Henri Stern (Institut Curie, Paris, France) for sharing the SF3B1 plasmids, Anke Busch (IMB Mainz, Germany) for iCLIP data preprocessing, and Elena Wasserburger-Zichel (University Hospital Cologne, Germany) and Bernd Timmermann (Sequencing Core Unit, Max Planck Institute for Molecular Genetics, Berlin, Germany) for their technical assistance. We furthermore thank the Regional Computing Center of the University of Cologne (RRZK) for providing computing time on the DFG-funded (funding number INST 216/512/1FUGG) high-performance computing (HPC) system CHEOPS as well as IT support. In addition, we acknowledge computational support of the Center for Information and Media Technology, especially the HPC team at the Heinrich Heine University, as well as the computing time provided by the John von Neumann Institute for Computing on the supercomputer JUWELS at the Jülich Supercomputing Centre (user IDs: VSK33, DNAzyme). This work was supported by the DFG Research Infrastructure West German Genome Center (407493903) as part of the Next Generation Sequencing Competence Network (project 423957469). High-throughput sequencing was carried out at the West German Genome Center, and production sites in Cologne and Düsseldorf. The study was funded by the German Research Foundation: KFO286-RP8/SCHW1605/1-1, SCHW1605/4-1 (GO-LONG), SFB1399 and SFB1530 to M.R.S., KFO-286-RP6 to M.H., KFO-286-CP to C.D.H., SFB1530 to M.H., the Volkswagen Stiftung Lichtenberg program to M.R.S., the Center for Molecular Medicine Cologne, CMMC (A12 to M.R.S.), and the EU Horizon 2021 LongTREC (no. 101072892) to R.H., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Evidence-based unification of potato gene models with the UniTato collaborative genome browser

  • Zagorščak, Maja
  • Zrimec, Jan
  • Bleker, Carissa
  • Nolte, Nadja
  • Juteršek, Mojca
  • Ramšak, Živa
  • Gruden, Kristina
  • Petek, Marko
Potato (Solanum tuberosum) is the most popular tuber crop and a model organism. A variety of gene models for potato exist, and despite frequent updates, they are not unified. This hinders the comparison of gene models across versions, limits the ability to reuse experimental data without significant re-analysis, and leads to missing or wrongly annotated genes. Here, we unify the recent potato double monoploid v4 and v6 gene models by developing an automated merging protocol, resulting in a Unified poTato genome model (UniTato). We subsequently established an Apollo genome browser (unitato.nib.si) that enables public access to UniTato and further community-based curation. We demonstrate how the UniTato resource can help resolve problems with missing or misplaced genes and can be used to update or consolidate a wider set of gene models or genome information. The automated protocol, genome annotation files, and a comprehensive translation table are provided at github.com/NIB-SI/unitato., The study was supported by the EU Horizon 2020 Research and Innovation Programme under grant agreement no. 862858 (ADAPT); the Marie Skłodowska-Curie Actions (MSCA) Doctoral Network “LongTREC” under grant agreement no. 101072892; the Public Scholarship, Development, Disability and Maintenance Fund of the Republic of Slovenia grant no. 11013–9/2021–2; and the Slovenian Research and Innovation Agency under grant agreements no. P4–0165, P4–0431, J2–3060, and Z4–50146., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cell culture differentiation and proliferation conditions influence thein vitroregeneration of the human airway epithelium

  • Redman, Elisa
  • Fierville, Morgane
  • Cavard, Amélie
  • Plaisant, Magali
  • Arguel, Marie-Jeanne
  • Ruiz Garcia, Sandra
  • McAndrew, Eamon M.
  • Girard-Riboulleau, Cédric
  • Lebrigand, Kevin
  • Magnone, Virginie
  • Ponzio, Gilles
  • Gras, Delphine
  • Chanez, Pascal
  • Abelanet, Sophie
  • Barbry, Pascal
  • Marcet, Brice
  • Zaragosi, Laure-Emmanuelle
The human airway mucociliary epithelium can be recapitulated in vitro using primary cells cultured in an air-liquid interface (ALI), a reliable surrogate to perform pathophysiological studies. As tremendous variations exist among media used for ALI-cultured human airway epithelial cells, the aim of our study was to evaluate the impact of several media (BEGM, PneumaCult, Half & Half, and Clancy) on cell type distribution using single-cell RNA sequencing and imaging. Our work revealed the impact of these media on cell composition, gene expression profile, cell signaling, and epithelial morphology. We found higher proportions of multiciliated cells in PneumaCult-ALI and Half & Half, stronger EGF signaling from basal cells in BEGM-ALI, differential expression of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) entry factor ACE2, and distinct secretome transcripts depending on the media used. We also established that proliferation in PneumaCult-Ex Plus favored secretory cell fate, showing the key influence of proliferation media on late differentiation epithelial characteristics. Altogether, our data offer a comprehensive repertoire for evaluating the effects of culture conditions on airway epithelial differentiation and will aid in choosing the most relevant medium according to the processes to be investigated, such as cilia, mucus biology, or viral infection. We detail useful parameters that should be explored to document airway epithelial cell fate and morphology., Supported by Fondation pour la Recherche Medicale grant DEQ20180339158; Institut National de la Sante et de la Recherche Medicale Inserm Cross-Cutting Scientific Program HuDeCA 201; Chan Zuckerberg Initiative grant 2017-175159-5022; H2020 Health DiscovAIR; Cancerop^ ole PACA Innovation Technologique 2018; Centre National de la Recherche Scientifique; Agence Nationale de la Recherche grant 21-ESRE-0052, ANR-19-P3IA-0002, ANR-19-CE14-0027, ANR-23-IAHU-0007, ANR-10-INBS-09-02, ANR-10-INBS-09-03; and HORIZON EUROPE Marie Sklodowska-Curie Actions grant 101072892. Conseil Departemental 06 016-294DGADSH-CV; Fondation du Souffle., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Icarust, a real-time simulator for Oxford Nanopore adaptive sampling

  • Munro, Rory
  • Wibowo, Satrio
  • Payne, Alexander
  • Loose, Matthew
The data underlying this article will be shared on reasonable request to the corresponding author., [Motivation]: Oxford Nanopore Technologies (ONT) sequencers enable real-time generation of sequence data, which allows for concurrent analysis during a run. Adaptive sampling leverages this real-time capability in extremis, rejecting or accepting reads for sequencing based on assessment of the sequence from the start of each read. This functionality is provided by ONT's software, MinKNOW (Oxford Nanopore Technologies). Designing and developing software to take advantage of adaptive sampling can be costly in terms of sequencing consumables, using precious samples and preparing sequencing libraries. MinKNOW addresses this in part by allowing the replay of previously sequenced runs for testing. However, as we show, the sequencing output only partially changes in response to adaptive sampling instructions. Here we present Icarust, a tool enabling more accurate approximations of sequencing runs. Icarust recreates all the required endpoints of MinKNOW to perform adaptive sampling and writes output compatible with current base-callers and analysis pipelines. Icarust serves nanopore signal simulating a MinION or PromethION flow cell experiment from any reference genome using either R9 or R10 pore models. We show that simulating sequencing runs with Icarust provides a realistic testing and development environment for software exploiting the real-time nature of Nanopore sequencing., [Availability and implementation]: All code is open source and freely available here—https://github.com/LooseLab/Icarust. Icarust is implemented in Rust, with a docker container also available., R.M. and A.P. were supported by BBSRC iCASE studentships. SW is supported by the LongTrec project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

IsoTools 2.0: Software for comprehensive analysis of long-read transcriptome sequencing data

  • Bi, Yalan
  • Lankenau, Tom Lukas
  • Lienhard, Matthias
  • Herwig, Ralf
Direct, single molecule measurement of RNA by long-read transcriptome sequencing (LRTS) enables the reliable detection of transcripts and alternative splicing events, thus contributing to the identification of splicing mechanisms, improvement of current gene models, as well as to the prediction of more reliable protein isoforms. LRTS data comes from either PacBio's single-molecule real time sequencing or from Oxford Nanopore's nanopore sequencing. Previously, we developed IsoTools, a software originally designed for processing and analyzing PacBio data. IsoTools copes with the complexity of LRTS data and offers multiple functionality for transcript identification and quantification as well as the analysis of differential isoform usage and local differential splicing events. Here, we report an update of the software, IsoTools 2.0, and demonstrate its additional performance on Oxford Nanopore data from multiple experimental protocols. We present the IsoTools 2.0 workflow, highlighting novel functionalities with respect to reliable transcript detection as well as transcription start site prediction. Additionally, we show novel metrics for structural description and quantification of gene model variability based on the gene's transcripts. We demonstrate the performance of IsoTools 2.0 on a variety of experimental protocols for library construction from a recent LRTS challenge. We show that IsoTools 2.0 is able to cope with the inherent complexity of LRTS data and that the workflow generates meaningful hypotheses on biomarkers for alternative splicing. The software is available from https://github.com/HerwigLab/IsoTools2/., Authors acknowledge funding from the EU’s Horizon 2021 program under the Marie Skłodowska-Curie grant agreement No 101072892 (LongTREC) and by the Max-Planck Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

TUSCO: benchmarking transcriptome reconstruction with endogenous single-isoform controls

  • Liu, Tianyuan
  • Paniagua, Alejandro
  • Jetzinger, Fabian
  • Ferrández-Peral, Luis
  • Frankish, Adam
  • Conesa, Ana
[Data availability] Publicly available LRS datasets used in this study include the LRGASP Consortium data for human WTC11 iPSC and mouse ES cells, accessible at the Synapse repository under accession syn25007472/wiki/608702. The RNA degradation datasets are deposited in the European Nucleotide Archive (ENA) under accession PRJEB53210, with supplementary FASTQ data for post-mortem brain samples available from the European Genome-Phenome Archive (EGA) under accession EGAS00001006542. The Replicated Mouse Brain and Kidney dataset, generated in-house, has been submitted in its entirety to the ENA under accessions PRJEB85167 (secondary accession ERP168594, “Sequencing of mice brains using Iso-Seq”) and PRJEB94912 (secondary accession ERP177675, “Sequencing of mice kidneys using Iso-Seq”). For benchmarking, the universal and tissue-specific TUSCO gene sets for human and mouse can be freely obtained at https://github.com/ConesaLab/SQANTI3 and at the dedicated TUSCO benchmarking framework portal https://tusco.uv.es. An example of the TUSCO report is available at: https://github.com/ConesaLab/tusco-paper/blob/main/example/tusco_output/tusco_report.html. The example input data and full TUSCO output files are provided in the example/ directory of the same repository. Source data are provided with this paper. All data are also available from the corresponding author upon request., Long-read sequencing (LRS) platforms, such as Oxford Nanopore and Pacific Biosciences, enable comprehensive transcriptome analysis but face challenges such as sequencing errors, sample quality variability, and library preparation biases. Current benchmarking approaches address these issues insufficiently: BUSCO assesses transcriptome completeness using conserved single-copy orthologous genes but can misinterpret alternative splicing as gene duplications, while SIRV spike-ins and ERCCs oversimplify real sample complexity, neglecting RNA degradation and RNA-extraction artifacts, thus inflating performance metrics. Simulation algorithms are limited in their ability to recapitulate the complexity of real samples. To overcome these limitations, we introduce the Transcriptome Universal Single-isoform COntrol (TUSCO) benchmarking framework, centered on a curated TUSCO gene set of genes lacking alternative isoforms that can be confidently treated as an internal ground truth. The TUSCO evaluation quantifies precision by identifying reconstructed transcripts that deviate from reference annotations and quantifies sensitivity by verifying detection completeness in human and mouse samples. Masking TUSCO gene set transcripts and replacing them with modified splice variants in the annotation creates a TUSCO-novel challenge that assesses reconstruction of the true, now-unannotated isoforms. Our validation demonstrates that TUSCO metrics provide accurate and reliable benchmarking without external controls, significantly improving quality control standards for transcriptome reconstruction using LRS., Computational analyses were performed on the high-performance computing cluster Garnatxa at the Institute for Integrative Systems Biology (I2SysBio). I2SysBio is a joint research centre formed by University of Valencia (UV) and Spanish National Research Council (CSIC). T.L., F.J., and A.C. disclose support for the research of this work from the European Union Marie Skłodowska-Curie Actions Doctoral Network project LongTREC [HORIZON-MSCA-2021-DN-01, grant agreement 101072892]. A.P. discloses support for the research of this work from the Spanish MICINN [FPU21/01597]. A.C. and L.F.P. disclose support for the research of this work from the National Human Genome Research Institute of the National Institutes of Health [1R21HG011280-01]. A.C. discloses additional support from MICIU/AEI [PID2023-152976NB-I00]. A.F. discloses support for the research of this work from the National Human Genome Research Institute of the National Institutes of Health [U24HG007234, U24HG011451], Wellcome Trust [WT222155/Z/20/Z], and the European Molecular Biology Laboratory., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

SQANTI-browser: visualization and curation of SQANTI3-classified long-read transcriptomes within the UCSC Genome Browser

  • Paniagua, Alejandro
  • Blanco, Carlos
  • Colomer Fernández, Andrés
  • Diekhans, Mark
  • Conesa, Ana
  • Monzó, Carolina
Long-read sequencing enables transcriptome-wide isoform discovery. However, it generates substantial technical and structural ambiguity that complicates transcript interpretation. Here, we present SQANTI-browser, a classification-aware visualization framework that converts SQANTI3 outputs into interactive UCSC Genome Browser Track Hubs, preserving full transcript structural metadata. By integrating SQANTI classifications directly within the UCSC ecosystem, SQANTI-browser enables dynamic filtering and evidence-guided curation alongside public resource tracks. Furthermore, its adaptive architecture natively supports non-reference genomes, orthogonal data, and custom metadata fields. Applied to clinical, noisy, and synthetic datasets, SQANTI-browser resolves alignment artifacts and rescues actionable novel isoforms, providing a robust framework for long-read transcriptome curation., This project has received funding from the European Union’s programme Horizon Europe under the Marie Skłodowska-Curie Postdoctoral Fellowship grant agreement Number 101149931, the Spanish MICINN (FPU21/01597), the Generalitat Valenciana (CIACIF/2023/124), the Spanish National Research Council (JAE Intro CSIC 2025/HubBCB-02) and NIH/NHGRI (U41HG007234 and U24HG002371)., A.C. has received in-kind funding from Pacific Biosciences for library preparation and sequencing, and collaborates with Oxford Nanopore in the Marie Skłodowska-Curie Actions Doctoral Network project LongTREC., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

AMaNITA: an end-to-end workflow for native tRNA nanopore sequencing data analysis

  • Katopodi, Xanthi-Lida
  • Pryszcz, Leszek P.
  • Llovera, Laia
  • Ollivier, Alexane
  • Cozzuto, Luca
  • Ponomarenko, Julia
  • Ponomarenko
Transfer RNA (tRNA) molecules serve as essential adapters during protein translation. While direct RNA sequencing (DRS) via Oxford Nanopore Technologies has emerged as a powerful platform for systematic tRNAome profiling, we currently lack a simple and robust statistical framework for nanopore tRNA data analyses. Here, we address this gap by developing AMaNITA (Abundance, Modifications, and Nanopore Intensity Toolbox Application), an end-to-end bioinformatic workflow that enables simplified, robust, and scalable analyses of nanopore native tRNA sequencing datasets. AMaNITA streamlines the entire analytical trajectory: from upstream processing (basecalling, mapping, filtering, batch effect correction) to downstream assessment of differential tRNA abundance and modification stoichiometry. The workflow generates an interactive HTML report for data exploration and analysis, allowing the user to download the source data files and resulting plots. AMaNITA can be executed using Singularity from the command line, without requiring installation of dependencies., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 101072892 (Marie Sklodowska-Curie Actions Doctoral Network LongTREC). EMN and this project received funding from the project PID2024-157315NB-I00; the European Union’s Horizon Europe through the European Research Council under the grant agreement number 101042103 and 101187456. We acknowledge support of the Spanish Ministry of Science and Innovation through the Centro de Excelencia Severo Ochoa (CEX2020-001049-S, MCIN/AEI /10.13039/501100011033), and the Generalitat de Catalunya through the CERCA programme and to the EMBL partnership., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001049-S)., No