Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Dimerization Effects and Negative Strain Energy in Silicon Monosulfide Nanotubes

  • Alonso Lanza, Tomás
  • Aguilera Granja, Faustino
  • Ayuela Fernández, Andrés
We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348).
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera del Toro, Rodrigo Humberto
  • Arruabarrena Larrarte, Mikel
  • Leonardo Liceranzu, Aritz
  • Ayuela Fernández, Andrés
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition- metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge nancial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG- STORAGE project (GA 870114). The Basque Government sup- ported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Poly(carboxylated ether)s as Cement Additives: The Effect of the Addition Method on Hydration Kinetics

  • Beldarrain Pavo, Sara
  • Goracci, Guido
  • Sánchez Dolado, Jorge
  • Barquero Salaberria, Aitor
  • Leiza Recondo, José Ramón
Polycarboxylate ether (PCE) superplasticisers have been widely used in cement formulations. However, it is not until recently that several studies have analysed the relationship between the properties and the molecular structure. In the present work, PCEs with different side chain lengths and charge densities synthesised through free radical copolymerisation are used to analyse the effect they have on the hydration of ordinary Portland cement (OPC). It was found that the addition method of these PCEs to the OPC significantly affects the hydration kinetics of the cement paste. When PCEs are added through the direct addition method, a linear dependency between the retardation of hydration and the microstructure of the used PCEs is observed. On the contrary, when PCEs are added through the delayed addition method (PCEs are added to the cement paste 5 min after water), no retardation in hydration is observed, but the rate of hydration is reduced., This work has been partially supported by the project “Novel eco-cementitious materials and components for durable, competitive, and bio-inspired offshore floating PV substructures (NaturSea-PV)”, funded by the Horizon Europe Programme of the European Union under contract number GA nº 101084348. However, the views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate Infrastructure and environment Executive Agency (CINEA). Neither the European Union nor the granting authority can be held responsible for them. The financial support from Eusko Jaurlaritza (GV-IT-1512-22), Ministerio de Ciencia e innovación (PID2021-123146OB-I00), and LTC Green Concrete is gratefully acknowledged. We also acknowledge support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and Sara Beldarrain thanks the University of the Basque Country UPV/EHU for the scholarship (PIF20/61).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dimerization effects and negative strain energy in silicon monosulfide nanotubes

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
This article belongs to the Special Issue Modeling, Simulation and Optimization of Nanomaterials., We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Theoretical elastic constants of tobermorite enhanced with reduced graphene oxide through hydroxyl vs epoxy functionalization: A first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ukrainczyk, Neven
  • Koenders, Eddie A.B.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Graphene-based materials are considered excellent candidates to implement cementitious nanocomposites due to their mechanical properties. This paper presents a comprehensive interface interaction that ends up with computing the elastic properties for four models of the C–S–H gel, taking tobermorite 14 Å as an example, with reduced graphene oxide (rGO) to form reinforced (tobermorite) cementitious nanocomposites within the density functional theory. We found that upon relaxing the model structures, the dissociation of hydroxyl functional groups from the hydroxyl/rGO lattice occurs not only in the presence of Ca2+ ions to compensate for local charges but even when the Ca2+ charges are compensated with hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The elastic constants showed high improvements for the cementitious nanocomposite of tobermorite 14 Å with intercalated hydroxyl/rGO layers. Thus, the bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio increased up to limits set as 165, 128, 134, and 15% compared to tobermorite 14 Å, respectively. In more detail, the specific values of the elastic constants were influenced by the interface, specifically the presence of hydroxyl or epoxy groups as well as how the charges of the Ca2+ ions were compensated. These findings are of interest for the design of future experiments that will help to engineer better rGO/cement composites., This research was fully funded by Karlsruhe House of Young Science (KHYS) and Deutsche Forschungsgemeinschaft (DFG) with the project number of 446266595. A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition-metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge financial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG-STORAGE project (GA 870114). The Basque Government supported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Time-dependent density functional theory (TDDFT) has established itself as a computationally efficient and effective alternative to the many-body perturbation theory for calculating the optical properties of solids. Within the framework of linear response formalism, TDDFT exhibits good agreement between optical absorption spectra and experimental data, as well as the possibility of directly determining exciton binding energies. However, the family of exchange-correlation kernels, known as long-range-corrected kernels, which accurately capture excitonic features, face challenges in simultaneously generating visually appealing spectra and precise exciton binding energies. Recently, progress has been made in addressing this discrepancy through a hybrid-TDDFT approach. Our study reveals that the key lies in the numerical treatment of the long-range Coulomb singular term. We conduct a meticulous investigation of the impact of the term in both pure-TDDFT and hybrid approaches using a Wigner-Seitz truncated kernel. Notably, we show that computing this term presents formidable technical difficulties in both approaches, pointing to the need for an improved description of the electron-hole interaction., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants No. PID2019-105488GB-I00, No. PCI2019-103657, No. PID2022-139230NB-I00, and No. TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (Project No. IT-1569-22), the European Commission NRGSTORAGE Project (GA 870114), MIRACLE Project (GA 964450), and NaturSea-PV (GA 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-particle approach to many-body relaxation dynamics

  • Pelc, Marta
  • Dams, David
  • Ghosh, Abhishek
  • Kosik, Miriam
  • Müller, Marvin M.
  • Bryant, Garnett W.
  • Rockstuhl, Carsten
  • Ayuela, Andrés
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
This paper addresses the challenge of modeling relaxation dynamics in quantum many-body systems, specifically focusing on electrons in graphene nanoflakes. While quantum many-body techniques effectively describe dynamics up to a few particles, these approaches become computationally intractable for large systems. Larger systems may be tackled with a single-particle approach that, however, struggles to incorporate relaxation effects. Existing relaxation models encounter issues such as an inability to capture system complexity and violation of the Pauli principle. In this paper, we propose a single-particle model that accounts for various relaxation effects at the crossroads of quantum optics and solid-state photonics, that overcomes the limitations of previous models. Our approach is rooted in the quantum-optical Lindblad model, where relaxation rates are deactivated once the target levels saturate due to the Pauli principle. This approach is referred to as the saturated-Lindblad model. To validate the predictions of the saturated-Lindblad model, we confront them against phenomenological and many-body physics models in low-dimensional systems, including atomic chains and graphene nanoflakes. Remarkably, the saturated-Lindblad model exhibits excellent agreement with few-body calculations, distinguishing itself from other existing approaches. Moreover, by assigning different relaxation rates to different transitions, we successfully reproduce cascade deexcitation dynamics and predict emission spectra. The saturated-Lindblad model offers the ability to describe dynamics in systems of practical sizes, encompassing a wide range of structures that can be effectively captured within the single-particle description., A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). D.D. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/14-1 within Project No. 465163297. M.M.M. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/8-1 within Project No. 378579271. A.A. acknowledges the support of the Spanish Ministry of Science and Innovation through Grants No. PID2019-105488GB-I00 and No. PID2022-139230NB-I00, and No. TED2021-132074B-C32. We acknowledge financial support from the European Commission from projects MIRACLE (Grant No. 964450), NaturSea-PV (Grant No.101084348), and NRG-STORAGE (Grant No. GA 870114). The Basque Government supported this work through Project No. IT-1569-22. A.G., M.P., and K.S. are grateful to the Donostia International Physics Center for their kind hospitality., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low density phases of TiO2 by cluster self-assembly

  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
The interest in titanium dioxide (TiO2) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2, with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources, and in the IPICYT’S National Supercomputing Center supported this research with the computational time grant TKII-E-0424-I-090424-20/PR-22. Finally, we also acknowledge to José Limón from IF-UASLP for computational support in the calculations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(carboxylated ether)s as cement additives: The effect of the addition method on hydration kinetics

  • Beldarrain, Sara
  • Goracci, Guido
  • Dolado, Jorge S.
  • Barquero, Aitor
  • Leiza, Jose R.
This article belongs to the Section Construction and Building Materials., Polycarboxylate ether (PCE) superplasticisers have been widely used in cement formulations. However, it is not until recently that several studies have analysed the relationship between the properties and the molecular structure. In the present work, PCEs with different side chain lengths and charge densities synthesised through free radical copolymerisation are used to analyse the effect they have on the hydration of ordinary Portland cement (OPC). It was found that the addition method of these PCEs to the OPC significantly affects the hydration kinetics of the cement paste. When PCEs are added through the direct addition method, a linear dependency between the retardation of hydration and the microstructure of the used PCEs is observed. On the contrary, when PCEs are added through the delayed addition method (PCEs are added to the cement paste 5 min after water), no retardation in hydration is observed, but the rate of hydration is reduced., This work has been partially supported by the project “Novel eco-cementitious materials and components for durable, competitive, and bio-inspired offshore floating PV substructures (NaturSea-PV)”, funded by the Horizon Europe Programme of the European Union under contract number GA nº 101084348. However, the views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate Infrastructure and environment Executive Agency (CINEA). Neither the European Union nor the granting authority can be held responsible for them. The financial support from Eusko Jaurlaritza (GV-IT-1512-22), Ministerio de Ciencia e innovación (PID2021-123146OB-I00), and LTC Green Concrete is gratefully acknowledged. We also acknowledge support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and Sara Beldarrain thanks the University of the Basque Country UPV/EHU for the scholarship (PIF20/61)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical and excitonic properties of calcite CaCO3

  • Janovec, Jozef
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Calcite has been successfully used as a substrate or coating material in optical devices, but very little is known about its own optical properties. In this study, we present a comprehensive analysis of the optical properties of CaCO3 calcite, a typical representative of metal carbonates, obtained using the density functional theory (DFT), GW, and Bethe–Salpeter equation (BSE) methods. Our findings demonstrate that the onset of the CaCO3 optical spectrum is characterized by bound excitons, with the excitonic wavefunction primarily localized on the CO3 units. We find that calcite exhibits two different types of excitons: a Frenkel-type exciton centered on the CO3 units, leading to a narrow absorption band, and a more delocalized charge-transfer exciton that contributes more significantly to the optical spectra. The excitons exhibit a strong anisotropy with a larger spatial extent in the xy plane, along the layers of the CO3 molecules. Our results provide insight into the electronic structure and reveal the distinctive optical properties of calcite, with further implications for optical applications and the design of nanodevices, where an accurate description of the dielectric properties is required., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants no. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. The authors acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cl−, Na+ and Mg2+ adsorption and electronic properties on 2-octyl acrylate and isobornyl acrylate monomers: A comprehensive DFT study

  • Bölen, Emre
  • Dolado, Jorge S.
  • Ayuela, Andrés
This article belongs to the Section Polymer Physics and Theory., The design of advanced functional materials from polymers involving 2-octyl acrylate and isobornyl acrylate monomers is crucial for applications such as biofouling resistance, coatings, UV-curable films, and use in marine environments. In this study, we investigated the adsorption and electronic properties of 2-octyl acrylate and isobornyl acrylate monomers in the presence of Cl−, Na+, and Mg2+ ions using Density Functional Theory calculations. Adsorption energies, quantum descriptors, and electrostatic potential maps were analyzed to elucidate ion-specific interactions with these monomers. Our findings indicate that Mg2+ ions exhibit the strongest interactions due to their high charge density, followed by Na+ and Cl− ions, which show moderate and weak adsorption, respectively. Density of states analyses revealed that Mg2+ significantly lowers HOMO and LUMO levels, narrowing the gap and stabilizing the system, while Cl− ions result in a smaller gap and weaker interactions. Electrostatic potential maps further confirmed these trends, correlating ion adsorption sites with molecular charge distributions. This study highlights the critical role of ion adsorption and its associated electronic properties and paves the way for future advancements in optimizing 2-octyl acrylate and isobornyl acrylate-based materials for applications such as coatings and use in marine environments., This study has been funded by the project “Novel eco-cementitious materials and components for durable, competitive, and bio-inspired offshore floating PV substructures (NaturSea-PV)”, funded by the Horizon-Widera-2022-Access-07-01 Programme of the European Union under contract number GA nº 101084348 and Spanish Ministry of Science and Innovation (grant numbers PID2022-139230NB-I00 and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimizing Hubbard U parameters for enhanced description of electronic and magnetic properties in CrI3 monolayers and bilayers

  • Lauer, Diego
  • González, J. W.
  • Suárez Morell, Eric
  • Ayuela, Andrés
The magnetic properties of CrI3 monolayers, which were recently measured, have been investigated considering electronic repulsion and localization effects in Cr 3d orbitals. In this study, we propose a DFT approach using Hubbard U corrections to improve accuracy. We compare the valence density-ofstates using the HSE06 hybrid functional and the DFT + U approach, which includes U parameters for both Cr 3d and I 5p orbitals. The results of our study indicate that the optimal values for U(Cr3d) and U(I5p) are 3.5 eV and 2.0 eV, respectively. This approach is further applied to improve calculations of electronic and magnetic properties in CrI3 monolayers and, more importantly, in bilayers combined with van der Waals functionals. These refinements hold promise for further studies of complex CrI3 nanostructures, and may also be of interest for other trihalide few-layer systems., JWG acknowledges financial support from ANID-FONDECY grant N. 1220700 (Chile). ESM and JWG acknowledge the financial support from ANID-FONDECYT 1221301 (Chile). AA and DL acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021- 132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), and the European Commission NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

GRANAD - Simulating GRAphene nanoflakes with ADatoms

  • Dams, David
  • Kosik, Miriam
  • Müller, Marvin M.
  • Ghosh, Abhishek
  • Babaze, Antton
  • Szczuczko, Julia
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
GRANAD is a program based on the tight-binding approximation to simulate optoelectronic properties of graphene nanoflakes and Su–Schrieffer–Heeger (SSH) chains with possible adatom defects under electromagnetic illumination. Its core feature is the numerical solution of a time-domain master equation for the spin-traced one-particle reduced density matrix. It provides time-resolved evolution of charge distributions, access to induced-field dynamics, and characterization of the plasmonic response. Other computable quantities include energy profiles, electron distribution in real space, and absorption spectra. GRANAD is written in Python and relies on the JAX library for high-performance array computing, just-in-time (JIT) compilation, and differentiability. It is intended to be lightweight, portable, and easy to set up, offering a transparent and efficient way to access the properties of low-dimensional carbon structures from the nanoscale to the mesoscopic regime. GRANAD is open source, with the full code and extensive documentation with usage examples available at https://github.com/GRANADlauncher/granad.git., D.D. and C.R. acknowledge support by the German Research Foundation within the Project (RO 3640/14-1 under project number - 465163297). M.M.M. and C.R. acknowledge support by the German Research Foundation within the Project (RO 3640/8-1 under project number 378579271). A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526) and are grateful to the Donostia International Physics Center for their kind hospitality. A.A. and A.B. acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348); research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Momentum-locked spin between topological and defect states in 1D patterns on bilayer graphene

  • Guerrero-Avilés, Raúl
  • Ayuela, Andrés
  • Chico, Leonor
  • Jaskólski, Włodzimierz
  • Pelc, Marta
Gating Bernal bilayer graphene breaks the inversion symmetry so that the stacking AB/BA boundaries within the gap reveal topologically protected states. In this study, we theoretically investigate arrays where the AB and BA domains are periodically patterned with experimentally identified defect lines. In the calculations we consider electron-electron interaction effects using density functional theory. Our findings reveal the existence of topological states within a gap induced by the patterning without an applied gate voltage. Furthermore, with an applied gate potential, the defect lines introduce spin-polarized states pinned within the gap and exhibit ferromagnetically coupled states. Importantly, we observe a hybridization of magnetic and topological states near the valleys that form conducting channels characterized by spin-momentum locking. The effect persists even with slight n-doping and gate voltage; however, the progressively pinned n-doped defect states induce spin polarization in the topological and valley states. Additionally, the two-dimensional bands under doping conditions exhibit nesting across the Fermi surface, allowing for modulation of charge densities along the lines which are nearly commensurate with the underlying graphene-defect lines. These quasi-one-dimensional patterns in bilayer graphene show a new kind of spin-conducting channels with novel characteristics common to both spintronics and valleytronics., R.G.-A., A.A. and M.P. acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021-132074B-C32). A.A. also acknowledges the Gobierno Vasco UPV/EHU (project no. IT-1569-22), and the European Commission NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.P. acknowledges support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). L.C. acknowledges the Spanish Ministry of Science and Innovation (Grant PID2022-136285NB-C31). We also acknowledge the support from the “(MAD2D-CM)-UCM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optical properties of CaO, SiO2, Al2O3 and Fe2O3 cementitious oxides

  • Janovec, Jozef
  • Agbaoye, Ridwan O.
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Data will be made available on request., We present a joint study of the optical properties of the relevant cementitious oxides CaO, SiO2, Al2O3, and Fe2O3, aimed at linking crystal structure, electronic properties, and optical response. Density functional theory (DFT) calculations were performed using both GGA and SCAN exchange–correlation functionals. Due to its superior accuracy, the SCAN ground-state was selected for GW and Bethe–Salpeter equation (BSE) calculations, used to correct the electronic structures and band gaps and to include electron–hole interactions. We show that the optical onset in the cement oxides is significantly influenced by the formation of strongly bound excitons. The results demonstrate that advanced methods beyond standard DFT, particularly the BSE approach, are essential for accurate prediction of the optical response of cementitious materials. Our findings provide a framework for understanding light–matter interactions in cement oxides and establish a computational foundation for the design of concrete-based composites with tailored optical and radiative properties. These insights have the potential to guide the development of advanced construction materials for passive energy management applications such as radiative cooling, in line with sustainable and energy-efficient building technologies., The authors acknowledge following projects: the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission MIRACLE project (GA 964450) and NaturSea-PV (GA 101084348), the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039). Research was conducted in the scope of the Laboratories for Transborder Cooperation (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nickel doping unlocks ambient-condition photostability in individual cesium lead bromide perovskite quantum dots

  • Ryu, Jehyeok
  • Krivenkov, Victor
  • Olejniczak, Adam
  • Arruabarrena, Mikel
  • Janovec, Jozef
  • Hadjadj, Sebastien E.
  • Ilyn, Max
  • Leonardo, Aritz
  • Martínez-Martínez, Virginia
  • Ayuela, Andrés
  • Nikitin, Alexey Y.
  • Rakovich, Yury P.
Developing efficient single-photon sources is fundamental to advancing photonic quantum technologies. In particular, achieving scalable, cost-effective, stable, and high-purity single-photon emission at ambient conditions is paramount for free-space quantum communication. However, fulfilling all the requirements simultaneously under ambient conditions has remained a significant challenge. Here we present the scalable, cost-effective ambient condition synthesis of nickel-doped CsPbBr3 perovskite quantum dots (NPQDs) using a modified ligand-assisted reprecipitation method. The resulting individual NPQDs demonstrate remarkable photostability, sustaining their performance for over 10 min under ambient conditions, and exhibit exceptional single-photon purity (>99%) with a narrow emission line width (∼70 meV). The remarkable photostability could be attributed to the spatial localization of the exciton by Ni atoms on the surface of the nanocrystal, reducing its interaction with the environment. Our results demonstrated that NPQDs with outstanding combinations of quantum emitting properties can be both synthesized and operated at ambient conditions., The study was funded by the Department of Science, Universities and Innovation of the Basque Government (grant nos. IT1526-22, PIBA-2023-1-0007, IT1639-22, IT-1569-22, PIBA-2024-1-0011) and the IKUR Strategy and by the Spanish Ministry of Science and Innovation (grant nos. PID2022-141017OB-I00, TED2021-129457B-I00, PID2023-146442NB-I00, PID2023-147676NB-I00, PID2022-139230NB-I00, TED2021-132074B-C32, PID2022-138750NB-C22, TED2021-130292B-C42). A.A. acknowledges support from the European Commission through the NaturSea-PV project (GA 101084348). Y.R. and A.O. acknowledge support from the ONRG (Award No. N62909-22-1-2031). This research was conducted within the framework of the Transnational Common Laboratories (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials and TRANS-LIGHT. Computations for this research were carried out using DIPC supercomputer resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Size-dependent photonic and radiative properties of CaO, SiO2, Al2O3 and Fe2O3 cementitious oxides

  • Janovec, Jozef
  • Agbaoye, Ridwan O.
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Data will be made available on request., The photonic properties of the cement-forming oxides CaO, SiO2, Al2O3, and Fe2O3 are presented in the context of photonic metaconcrete (PMC) and radiative cooling applications. The design of an efficient PMC with novel optical properties is based on the size dependence of the light–matter interaction. We use Mie theory to study the scattering properties, and Hapke model is used to study the emissivity of nano- and microparticles from the infrared (IR) to the ultraviolet and visible (UV–Vis) spectra. The IR and UV–Vis responses of the cement-forming oxides were obtained using the density functional theory and many-body perturbation theory. We model the size-dependent reflectance and emissivity in both air and C-S-H gel-like media. Nanoparticles of the wide band gap insulators CaO, SiO2 and Al2O3 exhibit efficient scattering of UV–Vis light within a radius range of 120–450 nm. Additionally, CaO nanoparticles effectively scatter NIR light, which makes them a promising material for reflecting solar radiation. Our results provide key tips for the engineering of highly reflective and selectively radiating photonic composites., The authors acknowledge following projects: the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, TED2021-132074B-C32, PID2022-137845NB-C22 and TED2021-132074B-C31), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Departamento de Promoción Económica y Proyectos Estratégicos de la Diputación Foral de Gipuzkoa under Gipuzkoa Quantum 2025 AQUAS (Project No. 2025-QUAN-000041-01), the European Commission MIRACLE project (GA 964450) and NaturSea-PV (GA 101084348), the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039)., Peer reviewed