Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

RAVE: RISC-V analyzer of vector executions, a QEMU tracing plugin

  • Vizcaíno Serrano, Pablo
  • Mantovani, Filippo|||0000-0003-3559-4825
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Ferrer Ibañez, Roger
Simulators are crucial during the development of a chip, like the RISC-V accelerator designed in the European Processor Initiative project. In this paper, we showcase the limitations of the current simulation solutions in the project and propose using QEMU with RAVE, a plugin we implement and describe in this document. This methodology can rapidly simulate and analyze applications running on the v1.0 and v0.7.1 RISC-V V-extension. Our plugin reports the vector and scalar instructions alongside useful information such as the vector-length being used, the single-element-width, and the register usage, among other vectorization metrics. We provide an API used from the simulated Application to control the RAVE plugin and the capability to generate vectorization traces that can be analyzed using Paraver. Finally, we demonstrate the efficiency of our solution between different evaluated machines and against other simulation methods used in the European Processor Accelerator (EPAC) project., Supported by the EuroHPC Joint Undertaking (JU): FPA N. 800928 (EPI), SGA N. 101036168 (EPI-SGA2) GA N. 101034126 (The European PILOT). Also supported by the Horizon Europe research and innovation funding programme, GA N. 101092993 (RISER). The JU receives support from the EU Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, Denmark and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Designing a QEMU plugin to profile multicore long vector RISC-V architectures: RAVE

  • Vizcaíno Serrano, Pablo
  • Ferrer Ibañez, Roger
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Mantovani, Filippo|||0000-0003-3559-4825
Simulators are crucial during the development of a chip, like the RISC-V accelerator designed in the European Processor Initiative project. In this paper, we showcase the limitations of the current emulation solutions in the project and propose using QEMU with RAVE, a plugin we implement and describe in this document. This methodology can rapidly emulate and analyze applications running on the v1.0 and v0.7.1 RISC-V V-extension. Our plugin reports the vector and scalar instructions alongside useful information such as the vector-length being used, the single-element-width, and the register usage, among other vectorization metrics. We provide an API used from the emulated Application to control the RAVE plugin and the capability to generate vectorization traces that can be analyzed using Paraver. Additionally, we demonstrate the efficiency of our solution against other emulators such as Whipser, ETISS, Spike, or FPGA simulation. Finally, we describe the challenges and solutions for synchronizing and emulating multi-threaded and multi-process binaries, and evaluate the performance of RAVE running on multiple processors., Supported by the EuroHPC Joint Undertaking (JU): FPA N. 800928 (EPI), SGA N. 101036168 (EPI-SGA2) GA N. 101034126 (The European PILOT). Also supported by the Horizon Europe research and innovation funding programme, GA N. 101092993 (RISER). The JU receives support from the EU Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, Denmark and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

NVIDIA Grace superchip early evaluation for HPC applications

  • Banchelli Gracia, Fabio
  • Vinyals Ylla-Català, Joan
  • Pocurull Serra, Josep
  • Clascà Ramírez, Marc
  • Peiró Conde, Kilian
  • Spiga, Filippo
  • Garcia Gasulla, Marta|||0000-0003-3682-9905
  • Mantovani, Filippo|||0000-0003-3559-4825
Arm-based system in HPC are a reality since more than a decade. However, when a new chip enters the market always implies challenges, not only at ISA level, but also with regards to the SoC integration, the memory subsystem, the board integration, the node interconnection, and finally the OS and all layers of the system software (compiler and libraries). Guided by the procurement of an NVIDIA Grace HPC cluster within the deployment of MareNostrum 5, and emulating the approach of a scientist who needs to migrate its scientific research to a new HPC system, we evaluated five complex scientific applications on engineering sample nodes of NVIDIA Grace CPU Superchip and NVIDIA Grace Hopper Superchip (CPU-only). We report intra-node and inter-node scalability and early performance results showing a speed-up between 1.3× and 4.28× for all codes when compared to the current generation of MareNostrum 4 powered by Intel Skylake CPUs., This research has received funding from the European Commission via the Horizon Europe research and innovation funding programme, under grant agreement 101092993 (RISER), the EuroHPC H2020 Industrial Leadership programme grant agreement 956416 (exaFOAM), and the European High Performance Computing Joint Undertaking (JU) under Framework Partnership Agreement No 800928 (European Processor Initiative) and Specific Grant Agreement No 101036168 (EPI SGA2). The JU receives support from the European Union’s Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, and Switzerland. The EPISGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Designing a QEMU plugin to profile multicore long vector RISC-V architectures: RAVE

  • Vizcaíno Serrano, Pablo
  • Ferrer Ibañez, Roger
  • Labarta Mancho, Jesús José
  • Mantovani, Filippo
Simulators are crucial during the development of a chip, like the RISC-V accelerator designed in the European Processor Initiative project. In this paper, we showcase the limitations of the current emulation solutions in the project and propose using QEMU with RAVE, a plugin we implement and describe in this document. This methodology can rapidly emulate and analyze applications running on the v1.0 and v0.7.1 RISC-V V-extension. Our plugin reports the vector and scalar instructions alongside useful information such as the vector-length being used, the single-element-width, and the register usage, among other vectorization metrics. We provide an API used from the emulated Application to control the RAVE plugin and the capability to generate vectorization traces that can be analyzed using Paraver. Additionally, we demonstrate the efficiency of our solution against other emulators such as Whipser, ETISS, Spike, or FPGA simulation. Finally, we describe the challenges and solutions for synchronizing and emulating multi-threaded and multi-process binaries, and evaluate the performance of RAVE running on multiple processors., Supported by the EuroHPC Joint Undertaking (JU): FPA N. 800928 (EPI), SGA N. 101036168 (EPI-SGA2) GA N. 101034126 (The European PILOT). Also supported by the Horizon Europe research and innovation funding programme, GA N. 101092993 (RISER). The JU receives support from the EU Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, Denmark and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

RAVE: RISC-V analyzer of vector executions, a QEMU tracing plugin

  • Vizcaíno Serrano, Pablo
  • Mantovani, Filippo
  • Labarta Mancho, Jesús José
  • Ferrer Ibañez, Roger
Simulators are crucial during the development of a chip, like the RISC-V accelerator designed in the European Processor Initiative project. In this paper, we showcase the limitations of the current simulation solutions in the project and propose using QEMU with RAVE, a plugin we implement and describe in this document. This methodology can rapidly simulate and analyze applications running on the v1.0 and v0.7.1 RISC-V V-extension. Our plugin reports the vector and scalar instructions alongside useful information such as the vector-length being used, the single-element-width, and the register usage, among other vectorization metrics. We provide an API used from the simulated Application to control the RAVE plugin and the capability to generate vectorization traces that can be analyzed using Paraver. Finally, we demonstrate the efficiency of our solution between different evaluated machines and against other simulation methods used in the European Processor Accelerator (EPAC) project., Supported by the EuroHPC Joint Undertaking (JU): FPA N. 800928 (EPI), SGA N. 101036168 (EPI-SGA2) GA N. 101034126 (The European PILOT). Also supported by the Horizon Europe research and innovation funding programme, GA N. 101092993 (RISER). The JU receives support from the EU Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, Denmark and Switzerland. The EPI-SGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

NVIDIA Grace superchip early evaluation for HPC applications

  • Banchelli Gracia, Fabio
  • Vinyals Ylla-Català, Joan
  • Pocurull Serra, Josep
  • Clascà Ramírez, Marc
  • Peiró Conde, Kilian
  • Spiga, Filippo
  • Garcia Gasulla, Marta
  • Mantovani, Filippo
Arm-based system in HPC are a reality since more than a decade. However, when a new chip enters the market always implies challenges, not only at ISA level, but also with regards to the SoC integration, the memory subsystem, the board integration, the node interconnection, and finally the OS and all layers of the system software (compiler and libraries). Guided by the procurement of an NVIDIA Grace HPC cluster within the deployment of MareNostrum 5, and emulating the approach of a scientist who needs to migrate its scientific research to a new HPC system, we evaluated five complex scientific applications on engineering sample nodes of NVIDIA Grace CPU Superchip and NVIDIA Grace Hopper Superchip (CPU-only). We report intra-node and inter-node scalability and early performance results showing a speed-up between 1.3× and 4.28× for all codes when compared to the current generation of MareNostrum 4 powered by Intel Skylake CPUs., This research has received funding from the European Commission via the Horizon Europe research and innovation funding programme, under grant agreement 101092993 (RISER), the EuroHPC H2020 Industrial Leadership programme grant agreement 956416 (exaFOAM), and the European High Performance Computing Joint Undertaking (JU) under Framework Partnership Agreement No 800928 (European Processor Initiative) and Specific Grant Agreement No 101036168 (EPI SGA2). The JU receives support from the European Union’s Horizon 2020 research and innovation programme and from Croatia, France, Germany, Greece, Italy, Netherlands, Portugal, Spain, Sweden, and Switzerland. The EPISGA2 project, PCI2022-132935 is also co-funded by MCIN/AEI /10.13039/501100011033 and by the UE NextGenerationEU/PRTR., Peer Reviewed, Postprint (author's final draft)