Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publication Artículo científico (JournalArticle)

High-throughput Thickness Gradient Screening Reveals Thickness and Light-intensity Dependent Efficiency in Indoor Organic Photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada-Cortés, Marián
  • Capella Guardià, Francesc Xavier
  • Casademont-Viñas, Miquel
  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy-Quiles, Mariano
[Abstract]: Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends on the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50–450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl). Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (RP) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCC-Cl shows broad thickness tolerance (≈230–410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCC-Cl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (∼305 nm) and varying by ≈15% across all four spectra. Analysis of intensity- and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient RP. This work demonstrates a rapid screening method and highlights the importance of thickness- and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science, Innovation and University through the Agencia Estatal de Investigación (MCIN/AEI/10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (grant no. 101086805). FXCG acknowledges the PhD program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Essential metrics for measuring indoor photovoltaics

  • Saeed, Muhammad Ahsan
Indoor photovoltaics (IPVs) are emerging as sustainable power sources for low-energy electronics operating under ambient lighting. However, the absence of standardized measurement protocols and reporting conventions continues to limit meaningful comparisons and broader technological progress. In this Perspective, we synthesize insights from recent literature to identify key metrics and practical considerations essential for reliable IPV characterization. We outline reasonable guidelines—ranging from light source calibration and spectral matching to device masking and temperature control—that promote reproducibility and enable fair benchmarking. These recommendations aim to lay the groundwork for future efforts toward standardizing indoor photovoltaic testing., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-throughput thickness gradient screening reveals thickness and light-intensity dependent efficiency in indoor organic photovoltaics

  • Saeed, Muhammad Ahsan
  • Swennen, Giel
  • Prada Cortés, Marián
  • Capella Guardià,Francesc Xavier
  • Casademont Viñas, Miquel
  • Rodríguez Martínez, Xabier
  • Martín, Jaime
  • Vandewal, Koen
  • Campoy Quiles, Mariano
Indoor organic photovoltaics (OPVs) are promising power sources for Internet-of-Things devices, but optimizing performance under diverse indoor lighting is challenging because the optimal thickness of the active layer depends the competition between charge transport and recombination, as well as on the incident light spectrum in a complex manner. Here, we use a high-throughput customized blade-coating system to generate continuous active-layer thickness gradients (50-450 nm) for five binary blends comprising three wide-bandgap donors (PTQ10, PM6, D18) and three non-fullerene acceptors (o-IDFBR, eh-IDTBR, FCC-Cl).Devices were characterized under four LED spectra (2700 K, 5200 K, 6500 K, B4) using a spectrum-on-demand source. Across 600 devices, intermediate thicknesses maximize shunt resistance (R P ) and fill factor, whereas thin and thick layers suffer from leakage and recombination. PTQ10:FCCl shows broad thickness tolerance (≈230-410 nm) and moderate spectral stability, with PCE varying by only ≈2.6% across indoor spectra and reaching a maximum of ≈21.7% under 2700 K. Conversely, PM6:FCCl attains higher PCE (≈26.4%) but is strongly thickness-sensitive, with peak efficiency realized within a narrow range (~305 nm) and varying by ≈15% across all four spectra. Analysis of intensity-and thickness-dependent charge transport indicates that performance is governed by photon absorption, spectral overlap and insufficient R P . This work demonstrates a rapid screening method and highlights the importance of thickness-and spectrum-optimized active layers for efficient indoor OPVs., This work was funded by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491). The authors acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN/ AEI /10.13039/501-100011033/) and the European Union (FEDER) through grants PID2021-128924OB-I00, PID2024-163010OB-I00 and CEX2023-001263-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors would like to thank Prof. Alejandro Goñi (ICMAB-CSIC) and Dr. Sergi Riera (ICMAB-CSIC) for useful discussions. We are also thankful to the Scanning Probe Microscopy Service of ICMAB-CSIC (Dr. Laura Rodríguez) for conducting AFM measurements. FXCG thanks Digital Surf for providing MountainsLab® Premium software, which was used for the analysis and visualization of AFM data. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. J.M. thanks financial support from European Research Council (Grant No. 101086805)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Otros (Other)

Electrocatalytic upcycling of PET-derived products: Catalyst design, C1 - C2 products, and coupled electrochemical reactions

  • Qamar, Muhammad Zain
  • Ali, Awais
  • Saeed, Muhammad Ahsan
  • Heijden, Maxime van der
The accumulation of plastic waste represents both a global environmental crisis and a largely untapped source of carbon feedstocks. Electrocatalytic upcycling of polyethylene terephthalate (PET) has emerged as a promising energy-efficient strategy to convert plastic-derived ethylene glycol into value-added C<inf>1</inf>-C<inf>2</inf> chemicals, including glycolic acid and formic acid, under mild operating conditions. This review summarizes recent advances in electrocatalyst design for PET upcycling, including defect-engineered, single-atom catalyst, and heterostructured interfaces, with a focus on how catalyst structure regulates interfacial charge transfer, oxidation pathways, and product selectivity. Beyond catalyst development, we highlight integrated electrocatalytic platforms that couple PET-derived anodic oxidation with value-added cathodic CO<inf>2</inf> or nitrate reduction, thereby lowering cell voltage and enabling co-production of value-added chemicals (e.g., ammonia, cyclohexanone oxime). Insights from in situ spectroscopy and computational modeling elucidate critical structure-function relationships, while process-level analyses underscore scalability and energy efficiency. Finally, key challenges and future opportunities related to reactor design, energy efficiency, and scalability are outlined, positioning electrocatalytic plastic-to-chemicals refineries as a viable pathway toward circular carbon utilization and sustainable energy systems., M.Z.Q. and M.v.d.H. acknowledge the support of the Natural Sciences and Engineering Research Council of Canada (NSERC) through the Discovery grant program (RGPIN-2025–04132). M.A.S. acknowledges funding by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed