Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Suppressing colloidal quantum dot multimer fusion leads to high-performance InSb infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Roda, Carmelita
  • Malla, Aditya Jagadeesh
  • Dosil García, Miguel
  • Mandal, Debranjan
  • Konstantatos, Gerasimos
Environmentally friendly InSb colloidal quantum dots (CQDs) short-wave infrared (SWIR) photodetectors feature characteristics of low-cost, high-volume scalability, CMOS integrability, and compliance with RoHS regulations, and hold great commercial potential. Yet, their performance falls short of commercially relevant specifications. In this work, it is posited that CQD fusion observed in these dots leads to the formation of band-tail trap states and it is further demonstrated that avoidance of such band-tail trap states is crucial for device performance. By doing so, InSb CQDs SWIR photodetectors are reported with compelling performance metrics, including a dark current of 4 µA cm-2, EQE of ˜20% (at -1 V), a linear dynamic range over 140 dB and a response time of 90 ns. This represents a more than ten-fold reduction in dark current compared to previously report InSb CQD photodetectors in the SWIR range. The record high PLQY of 10% for InSb/InP CQDs taken together with the high EQE of the device at zero bias confirm the achievement of high-quality InSb CQDs through the suppression of band-tail trap states and passivation of surface defects., G.K. acknowledges financial support from the European Research Coun- cil (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (grant agreement no. 101002306), the Fundació Pri- vada Cellex, the program CERCA and ‘Severo Ochoa’ Centre of Excel- lence CEX2019-000910-S funded by the Spanish State Research Agency. This project has also received funding from the European Union un- der grant agreement No 101119489 (2DNeuralvision). Views and opin- ions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. C.R. acknowledges MCIU (Ministerio de Ciencia Innovacion y Universi- dades)/AEI(Agencia Estatal de Investigacion)/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR under the Juan de La Cierva fellowship JDC2022-049722-I., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

InSb/InP core-shell colloidal quantum dots for sensitive and fast short-wave infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Ren, Yurong
  • Wang, Zhuoran
  • Cao, Pengfei
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) technology is considered the main contender toward a low-cost high-performance optoelectronic technology platform for applications in the short-wave infrared (SWIR) to enable 3D imaging, LIDAR night vision, etc. in the consumer electronics and automotive markets. In order to unleash the full potential of this technology, there is a need for a material that is environmentally friendly, thus RoHS compliant, and possesses adequate optoelectronic properties to deliver high-performance devices. InSb CQDs hold great potential in view of their RoHS-compliant nature and-in principle-facile access to the SWIR. However, to date progress in realizing high-performance optoelectronic devices, including photodetectors (PDs), has been limited. Here, we have developed a synthesis method for producing size-tunable InSb CQDs with distinct excitonic peaks spanning a wide range from 900 to 1750 nm. To passivate the surface defects and enhance the photoluminescence (PL) efficiency of InSb CQDs, we further designed an InSb/InP core–shell structure. By employing the InSb/InP core–shell CQDs in a photodiode device stack, we report on robust InSb CQD SWIR photodetectors that exhibit an external quantum efficiency (EQE) of 25% at 1240 nm, a wide linear dynamic range exceeding 128 dB, a photoresponse time of 70 ns, and a specific detectivity of 4.4 × 1011 jones., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

InSb/InP core-shell colloidal quantum dots for sensitive and fast short-wave infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Ren, Yurong
  • Wang, Zhuoran
  • Cao, Pengfei
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) technology is considered the main contender toward a low-cost high-performance optoelectronic technology platform for applications in the short-wave infrared (SWIR) to enable 3D imaging, LIDAR night vision, etc. in the consumer electronics and automotive markets. In order to unleash the full potential of this technology, there is a need for a material that is environmentally friendly, thus RoHS compliant, and possesses adequate optoelectronic properties to deliver high-performance devices. InSb CQDs hold great potential in view of their RoHS-compliant nature and-in principle-facile access to the SWIR. However, to date progress in realizing high-performance optoelectronic devices, including photodetectors (PDs), has been limited. Here, we have developed a synthesis method for producing size-tunable InSb CQDs with distinct excitonic peaks spanning a wide range from 900 to 1750 nm. To passivate the surface defects and enhance the photoluminescence (PL) efficiency of InSb CQDs, we further designed an InSb/InP core–shell structure. By employing the InSb/InP core–shell CQDs in a photodiode device stack, we report on robust InSb CQD SWIR photodetectors that exhibit an external quantum efficiency (EQE) of 25% at 1240 nm, a wide linear dynamic range exceeding 128 dB, a photoresponse time of 70 ns, and a specific detectivity of 4.4 × 1011 jones., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Suppressing colloidal quantum dot multimer fusion leads to high-performance InSb infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Roda, Carmelita
  • Malla, Aditya Jagadeesh
  • Dosil García, Miguel
  • Mandal, Debranjan
  • Konstantatos, Gerasimos
Environmentally friendly InSb colloidal quantum dots (CQDs) short-wave infrared (SWIR) photodetectors feature characteristics of low-cost, high-volume scalability, CMOS integrability, and compliance with RoHS regulations, and hold great commercial potential. Yet, their performance falls short of commercially relevant specifications. In this work, it is posited that CQD fusion observed in these dots leads to the formation of band-tail trap states and it is further demonstrated that avoidance of such band-tail trap states is crucial for device performance. By doing so, InSb CQDs SWIR photodetectors are reported with compelling performance metrics, including a dark current of 4 µA cm-2, EQE of ˜20% (at -1 V), a linear dynamic range over 140 dB and a response time of 90 ns. This represents a more than ten-fold reduction in dark current compared to previously report InSb CQD photodetectors in the SWIR range. The record high PLQY of 10% for InSb/InP CQDs taken together with the high EQE of the device at zero bias confirm the achievement of high-quality InSb CQDs through the suppression of band-tail trap states and passivation of surface defects., G.K. acknowledges financial support from the European Research Coun- cil (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (grant agreement no. 101002306), the Fundació Pri- vada Cellex, the program CERCA and ‘Severo Ochoa’ Centre of Excel- lence CEX2019-000910-S funded by the Spanish State Research Agency. This project has also received funding from the European Union un- der grant agreement No 101119489 (2DNeuralvision). Views and opin- ions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. C.R. acknowledges MCIU (Ministerio de Ciencia Innovacion y Universi- dades)/AEI(Agencia Estatal de Investigacion)/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR under the Juan de La Cierva fellowship JDC2022-049722-I., Peer Reviewed, Postprint (published version)