Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Construction of TI3C2 MXene-semiconductor heterostructures for efficient photocatalytic abatement of sulfamethoxazole

  • Iaconis, Paolo
  • Andino Enriquez, Manuel A.
  • Lagaac Angus, Fhebe
  • Boffa, Vittorio
  • Castilleno, Micaela
  • Calza, Paola
  • Paganini, Maria Cristina
[EN] A series of novel MXene (Ti3C2) based photocatalysts designed to obtain an enhance photocatalytic degradation of persistent pollutants have been developed. MXene was used as co-catalyst coupled with different materials. Several materials were prepared to form heterojunctions with MXene, specifically two C3N4-based materials and two ZnO-based materials, a bare one and a mixed one with a very low amount of CeO2. Sulfamethoxazole (SMZ), a widely used pharmaceutical frequently detected in aqueous systems, was selected as a model contaminant to evaluate the performance of the synthesized materials. MXene-ZnO and MXene-ZnO-CeO2 heterojunctions were synthesized and characterized to evaluate the structure, the morphology of the systems together with their optical and electronic properties. Photocatalytic tests under simulated solar irradiation showed that MXene-ZnO and MXene-ZnO-CeO2 composites were the fastest in degrading SMZ, achieving nearly complete SMZ removal within 45 min. The formation of several transformation products was assessed by LC-MS/MS, mainly associated with the S-N cleavage and hydroxylation reactions. Although SMZ was rapidly removed, toxicity prediction (ECOSAR) indicated the formation of intermediates with higher predicted toxicity, requiring longer irradiation times (around 120 min) to achieve effective detoxification., The authors would like to thank Dr. Mario Malerba for the fruitful discussion and for his help in performing TEM measurements. This project has received funding from the European Union under the Horizon Europe Marie Sklodowska-Curie Actions (MSCA) Doctoral Network program (IN2AQUAS-grant agreement number 101119555) ; The au-thors acknowledge support from European Union- Next Generation EU, Mission 4 Component 1 CUP D53D23010160006 with MUR (Italy) through PRIN Project MAPEC (N.2022599NR3) "Magnetic field assisted photo (electro) CO2 conversion-MAPEC; the Project CH4.0 under the MUR program "Dipartimenti di Eccellenza 2023-2027".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Role of extract purification in iron complexation and photo-Fenton reactivity under mild pH conditions

  • Arévalo-Aguado, Jordi|||0000-0002-0669-0933
  • Mattarello, Gaia
  • Amat Payá, Ana María|||0000-0003-4218-2685
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
  • Santos-Juanes Jordá, Lucas|||0000-0001-5539-8341
  • Cerdan, M.
[EN] Photo-Fenton processes operated at circumneutral pH require iron-complexing agents able to maintain Fe(III) solubility while sustaining efficient Fe(III)/Fe(II) cycling. In this work, polyphenol-rich extracts obtained from grape-processing residues were evaluated as natural ligands for photo-Fenton degradation of a mixture of six emerging contaminants (30 mg L-1 total) at pH 5-7 using 5 mg L-1 Fe(III). Raw alkaline extracts and membrane-refined fractions (300 and 150 kDa) were comprehensively characterized (TOC, COD, AOS, DLS, TPC, flavonoids and EEM fluorescence) and correlated with iron stability and degradation performance through a Doehlert multivariate design. Membrane fractionation significantly modified extract functionality. The 300 kDa retentate exhibited the highest phenolic and flavonoid densities (0.181 and 0.175 mg mg C-1, respectively) and maintained soluble iron at pH 7 with minimal losses over 60 min. Under optimized conditions (pH 6, 16 mg C L-1, stoichiometric H2O2), this fraction achieved 80% pollutant removal in 60 min, approaching the performance of EDTA and NTA when compared at equivalent carbon loads. In contrast, the raw extract was penalized by nonfunctional organic matter, while the 150 kDa fraction showed reduced chelating efficiency due to lower coordination-site density. The novelty of this work lies in establishing a direct correlation between membrane-driven compositional tuning (AOS and fluorescence signatures), iron stability, and photo-Fenton efficiency, demonstrating that functional group density rather than total organic carbon governs performance. These results highlight the potential of agro-residue-derived polyphenolic extracts as sustainable iron-complexing agents for photo-Fenton processes at mild pH., The authors want to acknowledge the financial support of the European Union's Horizon Europe research and innovation program under GA No 101131420 (Project PHENOCYCLES) , IN2AQUAS Project (n degrees 101119555) , financed by European Union HORIZON/MSCA, AGROALNEXT/2022/041 Project, funded by European Union NextGenerationEU (PRTR-C17) with the support of Ministerio de Ciencia e Innovacion-Spanish Government and Generalitat Valenciana and the Research Structures of the UPV with the FPI PREDOC UPV Program (Subprogram 2. Code: 20250665)