Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Ionic polymer absorbents inspired by deep eutectic solvents to recover cobalt and nickel

  • Bastos, Henrique
  • Gallastegui, Antonela
  • López de Lacalle Zabaleta, Jon
  • Schaeffer, Nicolas
  • Pringle, Jennifer M.
  • Mecerreyes Molero, David
  • Pozo Gonzalo, Cristina
Cobalt and nickel are vital metals for the transition to a decarbonized society, currently in critical supply conditions to meet future demands. The recovery of those metals from secondary sources can mitigate this issue, as well as treating hazardous waste and increasing its economic value. In this work, ionic polymers inspired by deep eutectic solvents (DES) were studied for cobalt and nickel recovery from representative recycling solutions. These polymers were prepared by simple and fast photopolymerization process combining [2-(methacryloyloxy) ethyl] trimethylammonium chloride (METAC) with a series of hydroxylated compounds (e.g. alcohol and phenolic compounds). Different driving forces for metal absorption; ionic interactions, hydrogen bonding coordination, acidity of the media and polymer swelling have been investigated. The poly(METAC:1-butanol) polymer showed the highest absorption capacity (46 ± 5 mg g−1 and 46 ± 4 mg g−1 for cobalt and nickel, respectively), competing with conventional materials. Moreover, the metal stripping and recovery step was investigated. Favourably, deionized water presented the highest desorption efficiency, in comparison with HCl, rendering this process ‘greener’ and highly cost-effective. Finally, the ionic polymers were successfully reused as absorbents for five absorption/desorption cycles, maintaining structural integrity. This approach can pose an alternative way of using systems inspired by DES, with application at a larger scale upon further optimizations., This work was partly developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MCTES. H. Bastos acknowledges the financial support from Deakin University (DUPR Scholarship 0000038986). The authors acknowledge the Australian Research Council (ARC) Industrial transformation Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. Financial support from EU (IONBIKE 2.0 MSCA-SE grant agreement no. 101129945), Eusko Jaurlaritza (GV-IT1525-22) and MINECO AEI (PID2020-119026GB-I00) is also acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publication Artículo científico (JournalArticle)

Eutectogels: The Multifaceted Soft Ionic Materials of Tomorrow

  • Mercadal, Pablo A.
  • González, Agustín
  • Beloqui Elizazu, Ana
  • Tomé, Liliana C.
  • Mecerreyes Molero, David
  • Calderón, Marcelo
  • Picchio, Matías L.
Eutectogels, a rising category of soft materials, have recently garnered significant attention owing to their remarkable potential in various domains. This innovative class of materials consists of a eutectic solvent immobilized in a three-dimensional network structure. The use of eco-friendly and cost-effective eutectic solvents further emphasizes the appeal of these materials in multiple applications. Eutectogels exhibit key characteristics of most eutectic solvents, including environmental friendliness, facile preparation, low vapor pressure, and good ionic conductivity. Moreover, they can be tailored to display functionalities such as self-healing capability, adhesiveness, and antibacterial properties, which are facilitated by incorporating specific combinations of the eutectic mixture constituents. This perspective article delves into the current landscape and challenges associated with eutectogels, particularly focusing on their potential applications in CO2 separation, drug delivery systems, battery technologies, biocatalysis, and food packaging. By exploring these diverse realms, we aim to shed light on the transformative capabilities of eutectogels and the opportunities they present to address pressing industrial, academic, and environmental challenges., P.A.M. acknowledges the fellowship provided by CONICET and funding PROIINDIT 2024 from FCA-UNC. M.L.P. has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 101028881 (10.3030/101028881) and acknowledges the IKERBASQUE-Basque Foundation for Science. M.C. is thankful for funding from the Basque Government (projects 2023333010, 2023333023, PIBA2023-1-0043), the University of the Basque Country (projects COLLAB22/05 and GIU21/033), the Ministry of Science and Innovation of the Government of Spain (grant PID2022-142739OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE; ’María de Maeztu’ Programme for Center of Excellence in R&D, grant CEX2023-001303-M funded by MICIU/AEI/10.13039/501100011033, and IKERBASQUE-Basque Foundation for Science. L.C.T. thanks CEMMPRE, which is financially support by FEDER funds through the program COMPETE – Programa Operacional Factores de Competitividade–and by national funds through FCT under the projects UID/EMS/00285/2020 and LA/P/0112/202. D.M. acknowledges the funding by the European Union under IONBIKE 2.0 project (grant agreement no. 101129945, 10.3030/101129945). A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) (Grant PID2022-142128NB-I00 funded by MCIN/ AEI/10.13039/501100011033 and FEDER, UE; by the "European Union NextGenerationEU/PRTR"; Grant CNS2023-145416 funded by MICIU/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR; RYC2018-025923-I from RyC program-MCIN/AEI /10.13039/501100011033 and FSE "invierte en tu futuro").
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unlocking sustainable power: advances in aqueous processing and water-soluble binders for NMC cathodes in high-voltage Li-ion batteries

  • Rolandi, Ana Clara
  • Meatza, I. de
  • Casado, Nerea
  • Forsyth, Maria
  • Mecerreyes, David
  • Pozo Gonzalo, Cristina
9 figures, 1 table., Current cathode electrode processing of lithium-ion batteries relies on the conventional use of polyvinylidene fluoride (PVDF) as a binder, accompanied by the toxic solvent N-methylpyrrolidone (NMP). Within cathode materials, the LiNixMn1−x−yCoyO2 (NMC) families stand out as most promising candidates for the next generation of lithium-ion batteries, boasting high energy density and capacity. This review extensively compares traditional battery manufacturing methods with the use of emerging waterborne binders, highlighting the benefits in terms of cost-effectiveness, environmental sustainability, and enhanced processing conditions. The transition to sustainable aqueous processing encounters challenges, including pH elevation, aluminium collector corrosion, and lithium leaching from the NMC materials. The exploration extends to tailored binder selection and additives, crucial in optimizing electrochemical properties for distinct NMC compositions, such as LiNi0.33Mn0.33Co0.33O2 (NMC 111), LiNi0.5Mn0.3Co0.2O2 (NMC 532), LiNi0.6Mn0.2Co0.2O2 (NMC 622) and LiNi0.8Mn0.1Co0.1O2 (NMC 811), and addressing challenges inherent in their aqueous processing. The integration of aqueous binders promises advancements and also shapes a strategic outlook for future research, contributing significantly to the sustainability of lithium-ion batteries., The authors acknowledge the Australian Research Council (ARC) Centre for Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. Financial support from EU (IONBIKE 2.0 MSCA-SE), Eusko Jaurlaritza (GV-IT1525-22) and MINECO AEI (PID2020-119026GB-I00) is gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemically-assisted leaching of active cathode materials from spent batteries with minimal pre-treatment using hydroxylated solvents

  • Bastos, Henrique
  • Schaeffer, Nicolas
  • Pringle, Jennifer M.
  • Eftekharnia, Mojtaba
  • Coutinho, João A. P.
  • Pozo Gonzalo, Cristina
6 figures, 2 tables., Spent lithium-ion batteries (LIBs) are a rapidly increasing source of waste that pose a hazardous and environmental problem. They are also a secondary source of valuable critical metals such as Li, Co, Ni and Mn. Their recycling often involves use of aggressive conditions, which challenge the sustainability character of the process. In this work, an electrochemically-assisted leaching process was carried out to dissolve valuable metals from pristine and spent LIB cathode materials under mild conditions without the need for any pre-treatment (removal of polymeric binder and current collector). Hydroxylated solvents were used as electrolytes, firstly in leaching of Co3O4, demonstrating that the applied potential played a determinant role in achieving high Co dissolution (73.1 %). Subsequently, real spent cathodes were directly used, without pre-treatment, as working electrodes under mild working conditions. Up to 82 % Li, 62 % Co, 60 % Ni and 52 % Mn were leached at potentials up to 3 V with fast kinetics in the first 30 min of the process. The structural changes caused by initial delithiation of the black mass, corrosion of the Al from the current collector, and the presence of binder, were identified as key in achieving competitive metal leaching efficiency values. This process can pave the way for new LIB recycling processes with less pre-treatment requirements, in milder conditions while still being scalable to an industrial setting., TOC description: The use of electrochemically-assisted leaching allowed an enhancement of the overall leaching efficiency of critical metals such as Li, Co and Ni from Co3O4 and NMC matrices when compared to a chemical leaching. The direct use of spent NMC 622 cathodes as working electrodes provided a simple and environmentally friendly way of extracting these metals from spent batteries, as less hazardous chemicals such as N-Methyl-2-pyrrolidone are required., This work was partly developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MCTES. H. Bastos acknowledges the financial support from Deakin University (DUPR Scholarship 0000038986). The authors acknowledge the Australian Research Council (ARC) Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. Financial support from EU (IONBIKE 2.0 MSCA-SE grant agreement No 101129945) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary material for Electrochemically-assisted leaching of active cathode materials from spent batteries with minimal pre-treatment using hydroxylated solvents [Dataset]

  • Bastos, Henrique
  • Schaeffer, Nicolas
  • Pringle, Jennifer M.
  • Eftekharnia, Mojtaba
  • Coutinho, João A. P.
  • Pozo Gonzalo, Cristina
Under a Creative Commons license BY 4.0., EXPERIMENTAl: Figure S1. Dismantled Li-metal | NMC622 pouch cells, with the 6 layers of Li-metal anode and 5 layers of NMC622 cathode, intercalated by each other in the top layer, directly after dismantling from right to left. LITERATURE DATA: Table S1. Ecotoxicity, toxicity and cost parameters of the hydroxylated solvents studied in this work. RESULTS: Figure S2. Leaching efficiency (%) obtained through electrochemically-assisted leaching of Co3O4 in 0.5 M HCl in EG, 0.5 M HCl in 25 % (v/v) Gly in water, and EG, for 24 h at 40 °C. Figure S3. UV-Vis spectra after electrochemically-assisted leaching of Co3O4 in 0.5 M HCl in EG for 24 h at 40 °C, at potentials between -0.75 V and 6 V. Figure S4. Resulting leachates after electrochemically-assisted leaching of Co3O4 in 0.5 M HCl in EG for 24 h at 40 °C, at either 5 V or 6 V of constant potential. Figure S5. Raman spectra of 0.5 M HCl in EG electrolyte and resulting leachates after electrochemically-assisted leaching (EL) of Co3O4 in 0.5 M HCl in EG for 24 h at 40 °C at 6 V. Figure S6. 1H-NMR (top) and 13C-NMR (bottom) spectra after chemical leaching (CL) or electrochemically-assisted (EL) leaching of Co3O4 in 0.5 M HCl in EG for 24 h at 40 °C, at either 4 V, 5 V or 6 V of constant potential. Figure S7. Resulting leachates immediately after carrying out the chemical dissolution of NMC622 precursor powder, pristine cathode with NMC622 active material coated with binder on the Al foil current collector and the resulting spent cathode after dismantling the cycled pouch cell. Table S2. Extraction efficiency of Li (%) determined by ICP-MS after electrochemically-assisted leaching of a spent NMC622 cathode in either 0.5 M HCl in 25 % (v/v) Gly in water or 0.5 M HCl in EG for 3 h at 40 °C with a constant potential of 1 V or 2 V. Figure S8. Separation of the spent NMC622 cathode into two layers during the electrochemically-assisted leaching process in 0.5 M HCl in 25 % (v/v) Gly in water for 3 h at 40 °C.Figure S9. Leaching efficiency of Al (%) from electrochemically-assisted leaching of NMC622 spent cathode after applying 1.0 V, 2.0 V or 2.5 V vs Ag/AgNO3 for 3 hours at 40°C, with aliquots collected at 15 min., 30 min., 1 h, 2 h and 3 h. Table S3. Parameters of the kinetics model based on the shrinking core model, logarithmic rate and mixed kinetics equation fittings,2-4 for Co, Ni and Mn after electrochemically-assisted leaching of a spent NMC622 cathode in 0.5 M HCl in 25 % (v/v) Gly in water for 3 h at 40 °C with a constant potential of 1.0 V, 2.0 V or 2.5 V. Figure S10. X-ray diffractograms of the NMC622 cathode material measured before assembly into the pouch cell (pristine electrode), after disassembly of the pouch cell (spent electrode) and after EL for 3 hours at 40 °C at either 1.0 V, 2.0 V or 2.5 V, focusing on the displacement of the a) (003); b) (101), (006) and (102); and c) (108) and (110) peaks. DISCUSSION: Coordination of Co ions by EG based on the Raman spectra from Figure S5., This work was partly developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020, and LA/P/0006/2020, financed by national funds through the FCT/MCTES. H. Bastos acknowledges the financial support from Deakin University (DUPR Scholarship 0000038986). The authors acknowledge the Australian Research Council (ARC) Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. Financial support from EU (IONBIKE 2.0 MSCA-SE grant agreement No 101129945) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Poly(3-hexylthiophene) nanoparticles as visible-light photoinitiators and photosensitizers in 3D printable acrylic hydrogels for photodynamic therapies

  • Abalos, Rocío Natera
  • Aziz, Ilaria Abdel
  • Caverzan, Matías
  • Lochedino, Arianna Sosa
  • Ibarra, Luis E.
  • Gallastegui, Antonela
  • Chesta, Carlos A.
  • Gómez, M. Lorena
  • Mecerreyes, David
  • Palacios, Rodrigo E.
  • Criado-González, Miryam
The design of smart photoelectrodes capable of stimulating the localized production of reactive oxygen species (ROS) on demand is of great interest for redox medicine therapies. In this work, poly(3-hexylthiophene) semiconducting polymer nanoparticles (P3HT SPNs) are used with a dual role to fabricate light-responsive hydrogels. First, P3HT SPNs act as visible-light photoinitiators to induce the photopolymerization of acrylic monomers such as acrylamide (AAm), 2-(hydroxyethyl) acrylate (HEA), and poly(ethylene glycol) diacrylate (PEGDA). This leads to the formation of acrylic hydrogels loaded with the P3HT SPNs, as demonstrated by photo-rheology and infrared spectroscopy. Furthermore, P3HT SPNs are also successfully used as photoinitiators for digital light processing (DLP) 3D printing purposes to fabricate shape-defined intelligent hydrogels. Interestingly, P3HT SPNs retain their photoelectrochemical properties when embedded within the polymer hydrogels, showing photocurrent densities that range from ∼0.2 to ∼1.1 μA cm−2 depending on the intensity of the visible light-lamp (λ = 467 nm). Second, they can be used as photosensitizers (PS) to generate reactive oxygen species (ROS), 12-15 μM H2O2, on demand. The acrylic hydrogels containing P3HT SPNs do not exhibit cytotoxic effects under normal physiological conditions in the darkness against mouse glioma 261 (GL261) cells and S. aureus bacteria. However, they induce a ∼50% reduction GL261 cancer cell viability and a ∼99% S. aureus cell death in contact with them upon illumination (λ = 467 nm) due to the localized overproduction of ROS, which makes them attractive candidates for photodynamic therapies (PDT)., The authors acknowledge the grant PID2020–119026GB-I00 funded by MCIN/AEI/10.13039/501100011033. M. C.-G. thanks ‘‘Ayuda RYC2022-036380-I financiada por MICIU/AEI/10.13039/ 501100011033 y por el FSE +’’ and the Emakiker program of POLYMAT (UPV/EHU). This work was funded by the European Union under GA no. 101129945 ‘‘IONBIKE 2.0’’, and the Eur- opean Union’s Horizon 2020 research and innovation pro- gramme under the Marie Sklodowska-Curie grant agreement No. 101034379. Authors also appreciate financial support from SECyT UNRC (PPI 2024), ANPCyT (PICT 2020/3803) and CON- ICET (PIP 11220200102377CO01). R. N. A., M. C., A. S. L. thanks CONICET for his doctoral scholarships. C. A. C., M. L. G., and R. E. P. are permanent research staff of CONICET., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Understanding the impact of additives on cobalt leaching efficiency using a citric acid-based deep eutectic solvent

  • Perera, Isuri N.
  • Pringle, Jennifer M.
  • O'Dell, Luke A.
  • Siriwardana, Amal
  • Pozo Gonzalo, Cristina
8 figures, 6 tables., Recovery of critical metals such as cobalt from secondary sources is an effective way to reduce the supply risk of metals that are necessary in clean energy technologies, but such recovery processes need to be more benign. Hence, this study presents new insights into leaching cobalt using deep eutectic solvents under mild conditions. The role of ethylene glycol (EG) and water as additives in cobalt leaching was investigated using a mixture containing citric acid (CA):choline chloride (ChCl) in 1 : 1 molar ratio. While the water concentration and Co leaching efficiency were directly related, that was not the case for the EG content. A larger amount of EG in the mixture (CA : ChCl : EG from 1 : 1 : 0.3 to 1 : 1 : 4 molar ratio) decreased the cobalt leaching efficiency, which was attributed to the presence of EG in different coordination forms, as suggested by FTIR spectroscopy. The optimal solvent mixture CA : ChCl : EG (1 : 1 : 1.1) led to leaching efficiencies of 43% cobalt and 65% lithium from lithium cobalt oxide (LiCoO2) at 60 °C for 48 h. Although lithium(I) was the key to increasing the leaching efficiency, we also observed that the presence of lithium(I) in the leachate could negatively impact the electrochemical reduction process. This may be due to the different speciation of cobalt(II) in the presence and absence of lithium(I), as indicated by NMR spectroscopy., This research was supported by the Australian Research Council Training Centre for Future Energy Storage Technologies (grant agreement No IC180100049) and funded by the Australian Government. I. N. Perera acknowledges the financial support from Deakin University (DUPR Scholarship). C.P.G. gratefully acknowledges the financial support from EU (IONBIKE 2.0 MSCA-SE, grant agreement No 101129945)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Supplementary files for Understanding the impact of additives on cobalt leaching efficiency using a citric acid-based deep eutectic solvent [Dataset]

  • Perera, Isuri N.
  • Pringle, Jennifer M.
  • O'Dell, Luke A.
  • Siriwardana, Amal
  • Pozo Gonzalo, Cristina
Under a Creative Commons BY-NC 3.0 license., Figure S1: FTIR spectra of neat CA:ChCl:EG (1:1:1.1), neat CA:ChCl:EG (1:1:4), leachate from Co3O4 using CA:ChCl:EG (1:1:1.1) and leachate from Co3O4 using CA:ChCl:EG (1:1:4).; FTIR analysis: Table S1: Molar ratio of the components present in the solution relative to Co, Figure S2: Variation of Co leaching efficiency from Co3O4 using CA:ChCl:EG (1:1:1.1) with time (72 h), 700 rpm stirring rate and 1:5 S:L ratio. Figure S3: Cyclic voltammograms corresponding to Co2+ in the leachates from (a) Co3O4 and (b) LiCoO2 and the neat CA:ChCl:EG (1:1:1.1) using GC working electrode. Scan rate: 50 mVs-1 and temperature: 60 °C. Insets: magnification of the cyclic voltammogram starting in the positive direction; H NMR analysis: Figure S4: EDX map spectra of electrodeposit resulting from the Co3O4 leachate using CA:ChCl:EG (1:1:1.1) (a) site 1 and (b) site 2. EDX map spectra of (c) Ni foil., This research was supported by the Australian Research Council Training Centre for Future Energy Storage Technologies (grant agreement No IC180100049) and funded by the Australian Government. I. N. Perera acknowledges the financial support from Deakin University (DUPR Scholarship). C.P.G. gratefully acknowledges the financial support from EU (IONBIKE 2.0 MSCA-SE, grant agreement No 101129945)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Accelerating neodymium’s first-shell dynamics toward improved metal recovery

  • Dobhal, Garima S.
  • Pozo Gonzalo, Cristina
  • Walsh, Tiffany R.
7 figure, 2 tables.-- The underlying dataset has been published as supplementary material of the article in the publisher platform at DOI http://dx.doi.org/10.1021/acs.jpcb.5c04772., An increasing demand for rare earth elements (REE) such as neodymium has created a need to explore avenues for their reclamation from secondary sources. To this end, electrodeposition of Nd has proven promising with the use of phosphonium ionic liquids (IL) with dilute quantities of water. However, the detailed reasons for this performance remain unclear. Herein, force-field molecular dynamics simulations of a neodymium salt in two phosphonium ILs ([P666,14][TFSI] and [P1,444][TFSI]) were conducted in the presence of trace concentrations of water. These simulations reveal dominant coordination structures, supported by ab initio MD simulations. Addition of water leads to a range of Nd3+ structures with participation from water, a broadening of TFSI– denticity, and accelerated first-shell anion dynamics. Overall, it is identified that trace quantities of water, along with a shorter alkyl-chained phosphonium, foster limited Nd ion hydration, while also significantly accelerating the dynamism of the Nd solvation sphere. The findings suggest that these factors could facilitate an easier deposition of Nd metal at the electrode interface. This work introduces a detailed molecular-scale understanding of the behavior of Nd3+ salts in phosphonium ILs and the effects of water on the coordination environment of Nd3+, which can guide future electrodeposition efforts for the recovery of REEs., The work was conducted with the use of resources and services from the National Computational Infrastructure (NCI) under the NCMAS scheme, which is supported by the Australian Government. G.D. would like to acknowledge the support of Deakin University for the provision of the Deakin University Postgraduate Research Scholarship. C.P.G. gratefully acknowledges the funding from the EU (IONBIKE 2.0 MSCA-SE, grant agreement no. 101129945)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PEDOT:PSS conducting eutectogel for enhanced electrical recording and stimulation in implantable neural interfaces

  • Kasavetov, Martin
  • Ruiz-Mateos Serrano, Rubén
  • Domínguez Alfaro, Antonio
  • Lee, Chaeyeon
  • Picchio, Matias L.
  • Mecerreyes, David
  • Malliaras, George G.
  • Rincón Montes, Viviana
  • Güemes, Amparo
Conductive polymers such as PEDOT:PSS are widely used in bioelectronic interfaces due to their mixed ionic–electronic conductivity and biocompatibility. However, their mechanical fragility and limited processability constrain their performance in implantable devices. Deep eutectic solvents (DES), when combined with PEDOT:PSS, form eutectogels that enable thick, soft coatings. Here, we present a PEDOT:PSS-based eutectogel incorporating choline chloride, lactic acid and GOPS, integrated into flexible thin-film electrode arrays for sciatic nerve interfacing. These implants feature an array of electrodes and a pre-formed spiral geometry to conformally wrap small-diameter nerves. Devices were fabricated using standard photolithography and reactive ion etching techniques, allowing side-by-side comparison of PEDOT:PSS/DES with conventional PEDOT:PSS electrodes. PEDOT:PSS/DES enabled single-layer films up to 800 nm thick, significantly greater than PEDOT:PSS, and yielding over three-fold improvements in impedance and charge injection capacity in vitro. Acute in vivo electrophysiology in rats confirmed enhanced neural recording and stimulation capabilities, with lower impedance, higher capacitance, and reduced motor activation thresholds. While PEDOT:PSS/DES more reliably elicited motor responses at lower stimulation currents, electromyogram signal amplitudes from the tibialis anterioris at matched stimulation levels were comparable between materials. These results suggest that while superior electrochemical properties improve neural interface performance, local electrode–tissue interactions remain critical. Overall, this work establishes DES-modified PEDOT:PSS as a promising electrode material for soft neural interfaces and highlights its potential for advancing implantable bioelectronics., The authors thank the Helmholtz Nano Facility (HNF) at Forschungszentrum Jülich for facilitating the microfabrication and S. Decke, E. Yilmaz, and R. Stockmann for providing support during microfabrication. The authors also thank E. Brauweiler-Reuters for carrying out FIB sectioning and SEM. The authors thank A. Offenhäusser for infrastructural and scientific support. R. R. M. acknowledges support from EPSRC grant [EP/S022139/1]. G. G. M. and A. D. A. acknowledge support from Horizon Europe UKRI Underwrite Innovate grant COPE-Nano under project number 10078978. M. L. P. and D. M. gratefully acknowledge the financial support from IKERBASQUE-Basque Foundation for Science and the Marie Sklodowska-Curie Research and Innovation Staff Exchanges program under grant agreement IONBIKE 2.0 MSCA-SE 101129945. A. G. acknowledges support from the Royal Academy of Engineering and Rosetrees Trust through grant no. RF-2324-23-284. This work was funded by UKRI grants and was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation; GRK2610 (project number 424556709)). For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) licence to any Author Accepted Manuscript version arising., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlation of the alkyl chain length and electrochemistry of neodymium in a phosphonium Ionic liquid with water as additive

  • Sánchez Cupido, Laura
  • Dobhal, Garima S.
  • Perera, Isuri N.
  • Bastos, Henrique
  • Pringle, Jennifer M.
  • Forsyth, Maria
  • Walsh, Tiffany R.
  • Pozo Gonzalo, Cristina
8 figures., Neodymium is considered a critical metal widely used in important sectors including mobility, clean energies, and telecommunications. Current processes to recycle neodymium from waste have major drawbacks, such as emissions of greenhouse gases or high energy consumption. Recently, electrodeposition of Nd at low temperatures using ionic liquids (ILs) (e.g., phosphonium, pyrrolidinium) has been reported as a safer and low-cost process. Herein, we show that modifications on the alkyl chain length of a phosphonium IL can affect Nd electrodeposition behavior. Electrochemical, spectroscopy, and classical molecular dynamics (MD) simulation studies were carried out on neodymium bis(trifluoromethylsulfonyl)imide in tributylmethylphosphonium bis(trifluoromethylsulfonyl)imide ([P1444][TFSI]) with various water concentrations, and the results were compared with those previously obtained with the long alkyl chain phosphonium trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide ([P666,14][TFSI]). It was found that water was beneficial for Nd electrodeposition from [P1444][TFSI], less water than the optimum amount for [P666,14][TFSI] was needed (0.1 wt % H2O), and purer deposits than those with [P666,14][TFSI] were obtained with this water content. Additionally, reduction current densities up to 5 times greater were achieved with the shorter alkyl chain phosphonium ([P1444][TFSI]). Upon water addition, FTIR and MD studies suggested different effects on TFSI conformers and structuring of the IL cation in the first coordination shell, which could be the origin of the different electrodeposition behavior observed in the two ILs. These findings highlight the importance of a careful design of the electrolyte composition and understanding the speciation for an efficient Nd recycling process., This research was supported by the Australian Research Council Training Centre for Future Energy Storage Technologies (grant agreement No IC180100049) and funded by the Australian Government. The work was conducted with the use of resources and services from the National Computational Infrastructure (NCI), which is supported by the Australian Government. GD and LSC would like to acknowledge the support of Deakin University for the provision of the Deakin University Postgraduate Research Scholarship. CPG gratefully acknowledges the funding from EU (IONBIKE 2.0 MSCA-SE, grant agreement No 101129945)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rational design of lithium sulphonamide polymeric cation exchange membranes for LiOH production by electro-electrodialysis

  • Amores, Marco
  • Gallastegui, Antonela
6 figures., The use of electro-electrodialysis (EED) for the conversion of lithium salts obtained from either hard-rock minerals or brines into high-value battery-grade lithium hydroxide is gaining traction as an alternative green technology. Current cation exchange membranes employed in Li-salt EED possess low selectivity towards Li+ and are dominated by polyfluoroalkyl polymer-based membranes, which pose significant environmental concerns. Hence, there is a need for the development of inexpensive membranes for Li-salt EED applications with a lower content of environmentally hazardous fluorinated compounds. In this work, novel self-standing Li-selective and low-fluorine content membranes have been developed based on inexpensive methacrylic monomers, including a lithium sulfonyl-1-(trifluoromethylsulfonyl)imide monomer. The membranes were prepared via fast UV-photopolymerisation. Rational design of the membranes with different co-monomer compositions and crosslinking degrees enabled the tailoring of the membrane properties including water uptake, mechanical strength, and electrochemical performance. The membranes showed a high Li-ion conductivity of up to 6.2 mS cm−1 and comparable EED performance to that of the Nafion117 membrane as benchmark, i.e., relatively low energy consumption of 13.9 kWh kg−1LiOH and high molar flux of up to 3.9 mmol h−1, with a Li+/Na+ molar fluxes ratio of 0.98. © 2026 The Author(s). Advanced Energy and Sustainability Research published by Wiley-VCH GmbH., The authors gratefully acknowledge the support of the FBI CRC and par-ticipant organisations. Financial support from EU (IONBIKE 2.0 MSCA-SE, grant agreement No 101129945), Eusko Jaurlaritza (GV-IT1525−22) and grant PID2023-153050OB-I00 funded by MCIU/AEI/10.13039/501100011033 and by ERDF/EU is gratefully acknowledged. Open access publishing facilitated by Deakin University, as part of the Wiley - Deakin University agreement via the Council of AustralasianUniversity Librarians., This study was supported by H2020 Marie Skłodowska-Curie Actions (Grant 101129945), Ministerio de Ciencia, Innovación y Universidades (Grant PID2023-153050OB-I00), Eusko Jaurlaritza (Grant GV-IT1525-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluorescent Supramolecular Gels Based on D-Sorbitol Derivatives

  • Odella, Emmanuel
  • Criado-González, Miryam
  • Ponzio, Rodrigo A
  • Mecerreyes, David
  • Picchio, Matías L
  • Mantione, Daniele
Supramolecular gels formed by low-molecular-weight gelators (LMWGs) are valuable soft materials due to their remarkable versatility and wide range of applications. Developing ambidextrous LMWGs that self-assemble in diverse solvents remains challenging, as such versatility requires precise molecular engineering to ensure robust structuring across varying polarity and hydrogen-bonding environments. Here, we present a family of sugar-based molecules functionalized with naphthyl (DNapS), benzothiadiazole (DBTDS), and coumarin (MCumS) moieties, synthesized by a green, scalable method, which serve as fluorescent LMWGs. Their gelation abilities are evaluated in water, organic solvents of different polarities, and deep eutectic solvents (DES). Among them, MCumS forms gels in water, short-chain alcohols, and terpene-based hydrophobic DES, highlighting its potential as a rare example of an LMWG capable of gelation across chemically diverse environments. Morphological analysis of MCumS gels reveals fibrous network formation in water and distinct, solvent-dependent architectures in eutectogels. Interestingly, supramolecular gels based on this LMWG and zwitterionic DES show superior viscoelastic behavior and injectability. These findings not only expand the library of fluorescent LMWGs but also contribute to the fundamental understanding of structure-property relationships in versatile supramolecular gel systems., The authors thank for technical and human support provided bySGIker (UPV/EHU/ ERDF, EU). The authors also thank CIC bioma-GUNE for their valuable collaboration in the circular dichroism exper-iments. This work was funded by the European Union under theIONBIKE 2.0 project (grant agreement No. 101129945, https://doi.org/10.3030/101129945) and the European Union’s Horizon 2020 researchand innovation program under the Marie Sklodowska-Curie grantagreement No. 101034379. D. M., M. L. P., and D. M. gratefully acknowledge the financial support from IKERBASQUE-Basque Foundation for Science. M. C-G. thanks Grant RYC2022-036380-I fundedby MICIU/AEI/10.13039/501100011033 and FSE+, and Grant CNS2024-154833 funded by MICIU/AEI /10.13039/501100011033. M. L. P. gratefully acknowledges the financial support from the Basque Government,Department of Education (IT1766-22) and the Spanish Research Agency(AEI) (RYC2024-048187-I from the RyC program). D. M. thanked AyudaRYC2021-031668-I financed by MCIN/AEI/10.13039/501100011033 and bythe European Union Next Generation EU/PRTR. E. O. also appreciates the financial support from Agencia Nacional de Promoción Científica y Tecnológica (PICT 2021/589, PICTO 2022/65). E. O. is a permanentresearch staff member of CONICET-Argentina, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

PEDOT-Based Eutectogel Electrode Arrays for Enhanced High-Resolution Electrogastrography: Fabrication, Stability, and Wearable Performance

  • Slaughter, Christopher
  • Gatecliff, Luke
  • Tao, Xudong
  • Ruiz-Mateos Serrano, Rubén
  • Jin, Amy
  • Picchio, Matias L.
  • Mantione, Daniele
  • Domínguez Alfaro, Antonio
  • Malliaras, George G.
Cutaneous electrogastrography (EGG) is a non-invasive diagnostic technique critical for assessing gastrointestinal (GI) function, particularly in monitoring chronic disorders and abnormalities in gastric motility. However, traditional EGG technologies are limited by low spatiotemporal resolution, poor electrode stability, static configurations, and reliance on disposable silver/silver chloride (Ag/AgCl) electrodes with gel electrolytes that dehydrate over time. These factors increase costs and confine high-resolution EGG to clinical settings, limiting its utility for long-term and point-of-care (POC) applications. Here, a fabrication technique for soft, 3D-protruded and conducting eutectogel array of electrodes is reported. The PEDOT eutectogel interlayer interface was engineered to enhance conductivity, reduce skin-electrode impedance, and improve dehydration resistance compared to Ag/AgCl electrodes. Long-term stability was assessed under extended ambient drying conditions. A 16-circular electrode array was fabricated and optimized through a transfer function analysis, yielding electrodes with a 15 mm diameter and a 30 mm interelectrode spacing. High-resolution EGG signals were successfully recorded from the epigastrium using the electrode array before and after a meal, providing spatially resolved information. This work presents a promising solution for low-cost, stable, and long-term gastric monitoring with high spatial resolution, advancing wearable gastrointestinal diagnostics and enabling point-of-care monitoring of chronic gastrointestinal disorders., C.S. acknowledges financial support from the Gates-Cambridge Trust. G.M. acknowledges support from the Engineering and Physical Sciences Research Council (UK) (Grant EP/W017091/1). G.M. and A.D-A. acknowledge the financial support from the EU (COPE-Nano, ID: 101059828) and EPSRC IRC in Targeted Delivery for Hard-to-Treat Cancers (EP/S009000/1). RM acknowledges the EPSRC CDT in Nanoscience and Nanotechnology (EP/L015978/1). R.-M.S. acknowledges the EPSRC grant (EP/S022139/1). M.L.P. and D.M. gratefully acknowledge the financial support from IKERBASQUE-Basque Foundation for Science. M.L.P. gratefully acknowledges the financial support from the Basque Government, Department of Education (IT1766-22). This research was funded by the European Union under the IONBIKE 2.0 project (grant agreement n. 101129945, https://doi.org/10.3030/101129945). D.M. thanked Ayuda RYC2021-031668-I financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., C.S. acknowledges financial support from the Gates-Cambridge Trust. G.M. acknowledges support from the Engineering and Physical Sciences Research Council (UK) (Grant EP/W017091/1). G.M. and A.D-A. acknowledge the financial support from the EU (COPE-Nano, ID: 101059828) and EPSRC IRC in Targeted Delivery for Hard-to-Treat Cancers (EP/S009000/1). RM acknowledges the EPSRC CDT in Nanoscience and Nanotechnology (EP/L015978/1). R.-M.S. acknowledges the EPSRC grant (EP/S022139/1). M.L.P. and D.M. gratefully acknowledge the financial support from IKERBASQUE-Basque Foundation for Science. M.L.P. is grateful for the financial support from the Basque Government, Department of Education (IT1766-22) and the Spanish Research Agency (AEI) (RYC2024-048187-I from RyC program). This research was funded by the European Union under the IONBIKE 2.0 project (grant agreement n. 101129945, https://doi.org/10.3030/101129945). D. M. thanked Ayuda RYC2021-031668-I financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Body surface potential mapping of the cortico-muscular axis using smart textile electrode arrays

  • Ruiz-Mateos Serrano, Rubén
  • Brunt, Charlie
  • Tao, Xudong
  • Zajaczkowski, Maciej
  • Domínguez Alfaro, Antonio
  • Picchio, Matias L.
  • Mantione, Daniele
  • Drakakis, Emmanuel M.
  • Mecerreyes, David
  • Malliaras, George G.
Cutaneous electrophysiology is a fundamental non-invasive technique for assessing electrically active organs such as the brain, heart, and muscles. Standard approaches, however, are limited in spatial resolution, reducing sensitivity to certain pathological features. The development of body surface potential mapping using electrode arrays has helped overcome these limitations, enhancing the diagnostic power of cutaneous recordings, yet clinical adoption remains constrained by challenges in electrode performance, wiring complexity, wearability, data transmission, and interpretability. Here, we present a hybrid e-textile electrode array system that overcomes these barriers, enabling simultaneous mapping of electrical activity along the cortico-muscular axis. The system combines application-specific conducting polymer coatings to improve electrode performance, a flexible fabrication process for robust connectivity and wearability, and interpretable machine learning algorithms for data analysis. In controlled single-subject experiments, we demonstrate reliable muscle and brain recordings, enabling classification of grasped object shapes and somatosensory stimuli. Simultaneous multi-site recordings along the cortico-muscular axis provide spatial maps of reaction time distributions and allow prediction of muscle activation patterns from cortical activity. This platform establishes a framework for wearable, multi-modal electrophysiological mapping and non-invasive study of cortico-muscular dynamics, representing a step towards practical brain–body interfaces with applications in neurorehabilitation, prosthetics, and human–machine interaction., This work was supported by EPSRC [grants EP/S022139/1 and EP/W017091/1]. M.L.P. is thankful to the IKERBASQUE-Basque Foundation for Science and the Spanish Research Agency (AEI) (RYC2024-048187-I from RyC program) for the financial support. M.L.P. gratefully acknowledges the financial support from the Basque Government, Department of Education (IT1766-22). Part of this work was funded by the European Union under the IONBIKE 2.0 project (Grant agreement No. 101129945, https://doi.org/10.3030/101129945). The authors acknowledge support from a HORIZON EUROPE UKRI UNDERWRITE INNOVATE grant (COPE-Nano, 10078978) and from the NIHR Cambridge Biomedical Research Centre (NIHR203312). The views expressed are those of the authors and not necessarily those of the NIHR or the Department of Health and Social Care. D.M. thanks Ayuda RYC2021-031668-I financed by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M.L.P. is thankful to the IKERBASQUE-Basque Foundation for Science, grant RYC2024-048187-I funded by MICIU/AEI/10.13039/501100011033 and FSE+, and the Basque Government, Department of Education (IT1766-22) for the financial support. Partial support by the EPSRC Transformative Healthcare NISNEM Technology Grant (EP/T020970/1) is acknowledged., Peer reviewed