Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Multianalytical Approach for Laser Cleaning Assessment of Ancient Tapestries

  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticiolo, Iacopo
  • Ciofini, Daniele
Poster presented at the International Conference on Analytical Techniques for Heritage Studies and Conservation (TECHNART 2025), held in Perugia (Italy), May 6–9, 2025., In the field of Heritage Science, laser cleaning of textiles has been a challenging topic for years. As a promising cleaning method for different artwork materials, such as stone, metals or paintings, several studies have been carried out to test the adequacy of this method for textiles, as it is contactless and does not require humectants or water [1]. The present work concerns the laser cleaning of three historical tapestry pieces from the 16th – 18th centuries provided by the Royal Tapestry Factory, Madrid, Spain. The historical textile samples with colored threads were characterized before and after laser irradiation using a multianalytical approach to assess the suitability and feasibility of the laser cleaning method. The cleaning tests were performed with a Long-Q-Switched (LQS) Nd:YAG laser at its fundamental wavelength (1064 nm, 120 ns) with different laser fluences, from 0.1 to 1.8 J/cm2. The multianalytical study includes the techniques of Optical Microscopy (OM), Fourier-Transform Infrared Spectroscopy (FTIR), μ-Raman spectroscopy and Surface Enhance Raman Spectroscopy (SERS), Fibre Optics Reflectance Spectroscopy (FORS) and Colorimetry. FTIR was used to determine the nature of the warp and weft fibers [2]. Additionally, μ-Raman and SER spectroscopies served to identify the organic colorants used for dying the textile threads [3]. To select the best laser wavelength, FORS measurements were performed in every color tone of the pieces. These measurements helped us to decide on the use of 1064 nm for laser cleaning of the pieces. Finally, OM and Colorimetry were performed before and after laser irradiation in selected areas of the pieces to assess the dust removal and possible discoloration/damage of the fibers at used fluences. The present work has revealed that silk is the main manufacturing material and that the colorants used were, among others, indigo and alizarin. Regarding laser cleaning effects, the promising preliminary results indicate efficient removal of dust and the absence of color changes on the remaining textile., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC-CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A laser-based bottom-up approach for the characterization and conservation of historical textiles

  • Maestro-Guijarro, Laura
  • Castillejo Striano, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticioli, Iacopo
  • Ciofini, Daniel
  • Carmona-Quiroga, Paula
Poster presented at LACONA XIV (Lasers in the Conservation of Artworks), Bucharest, Romania, 09-12 September 2025. Awarded MDPI prize for the best scientific poster, Lasers are versatile tools applied across fields such as nanofabrication, spectroscopy, and conservation of cultural heritage. Their broad applicability and selective action make them especially valuable in conservation studios for cleaning delicate materials like paintings, paper, textiles, and ethnographic artifacts. The present study highlights the multifunctionality of laser-based techniques through a multi-step investigation involving the material characterization and laser cleaning of three historical tapestries (16th–18th century) provided by the Royal Tapestry Factory, Madrid. A multi-analytical approach, comprising Optical Microscopy (OM), Diffuse Reflectance Fourier-Transform Infrared Spectroscopy (DR-FTIR), Fibre Optics Reflectance Spectroscopy (FORS), Colorimetry and UV-induced fluorescence photography, was used to characterize materials and assess surface changes following laser treatment. The latter was performed using a 1064 nm Long Q-Switched Nd:YAG laser (120 ns pulses), as proved to be the most effective and safe wavelength for cleaning textile materials dyed with organic colorants. Key findings of this study include the identification by DR-FTIR of silk and wool as the primary textile materials. μ-Raman and Surface Enhanced Raman Spectroscopy (SERS) were used to identify organic dyes. SERS was performed by extracting dyes via acid hydrolysis and enhancing the signal with silver nanoparticles synthesized by laser ablation in water (1064 nm, Q-switched, 20 Hz). The SERS protocol successfully revealed the presence of weld, alizarin, and cochineal dyes, while μ-Raman confirmed the presence of indigo in blue regions. Preliminary laser cleaning tests demonstrated that, within the optimal fluence range of 0.5–1.0 J/cm², efficient dust removal was achieved without inducing optical or chemical alterations to the substrate. This work represents a meaningful step forward in the field of textile conservation, demonstrating the potential of laser technologies for the safe and effective cleaning of dyed historical fabrics., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC-CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Analyses and IR laser cleaning assessment of ancient tapestries from Royal Tapestry Factory, Madrid

  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo Striano, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticioli, Iacopo
  • Ciofini, Daniele
Paper presented at the III PhDay Campus Serrano CSIC, Madrid, June 12th, 2025, In the field of Heritage Science, laser cleaning of textiles has been a challenging topic for years. As a promising cleaning method for different artwork materials, such as stone, metals or paintings, several studies have been carried out to test the adequacy of this method for textiles, as it is contactless and does not require humectants or water [1]. The present work concerns the laser cleaning of three historical tapestry pieces from the 16th – 18th centuries provided by the Royal Tapestry Factory, Madrid, Spain. The historical textile samples with colored threads were characterized before and after laser irradiation using a multianalytical approach to assess the suitability and feasibility of the laser cleaning method. The cleaning tests were performed with a Long-Q-Switched (LQS) Nd:YAG laser at its fundamental wavelength (1064 nm, 120 ns) with different laser fluences, from 0.1 to 1.8 J/cm2. The multianalytical study includes the techniques of Optical Microscopy (OM), Diffuse Reflectance Fourier-Transform Infrared Spectroscopy (DR-FTIR), µ-Raman spectroscopy and Surface Enhanced Raman Spectroscopy (SERS), Vis-NIR Reflectance Spectroscopy (Vis-NIR RS), and Colorimetry. DR-FTIR was used to determine the nature of the warp and weft fibers [2]. Additionally, µ-Raman and SER spectroscopies served to identify the organic colorants used for dying the textile threads [3]. To select the best laser wavelength, Vis-NIR RS measurements were performed in every color tone of the tapestries. These measurements helped us to decide on the use of 1064 nm for laser cleaning of the pieces. Finally, OM and Colorimetry were performed before and after laser irradiation in selected areas of the pieces to assess the dust removal and possible discoloration/damage of the fibers at used fluences. The present work has revealed that silk is the main manufacturing material and that the colorants used were, among others, indigo and alizarin. Regarding laser cleaning effects, the promising preliminary results indicate efficient removal of dust and the absence of color changes on the remaining textile., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Varnish-coated oil paints under laser treatment: Comparative surface- and depth-resolved assessment of 213 nm (15 ns), 266 nm (15 ns), and 2940 nm (160 µs) ablation regimes

  • Ciofini, Daniele
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Osticioli, Iacopo
  • Castillejo, Marta
  • Siano, Salvatore
  • Oujja, Mohamed
This study employs a multi-analytical, non-invasive approach to compare the physico-chemical modifications induced by 213, 266 nm (15 ns pulse duration) and 2940 nm (160 µs) lasers in the removal of varnish films from oil paintings. Artificially aged oil paint films coated with dammar and sandarac varnishes were irradiated at threshold and supra-thresholds fluence levels. Ablation depths, residual varnish thickness (zvar) and structural changes following laser processing were non-destructively quantified via Multiphoton Excitation Fluorescence (MPEF) depth profiling. Differential Interference Contrast (DIC) microscopy revealed that morphological effects are highly wavelength-dependent. While 266 nm and 2940 nm pulses induced surface texturing via photothermal mechanisms, 213 nm irradiation promoted photolytic bond cleavage, resulting in controlled, micrometric layer-by-layer ablation. Diffuse Reflectance FTIR (DR-FTIR) and Laser-Induced Fluorescence (LIF) confirmed that physicochemical modifications may occur at 266 and 2940 nm in the underlying paint when zvar is lower than the optical penetration depth. These results provide important insights into laser-matter interactions, identifying 213 nm as an effective method for “dry” surface cleaning of picture varnishes. Conversely, 266 nm and 2940 nm lasers are better suited for integration into hybrid, solvent-based protocols, where the laser facilitates subsequent removal by mild cleaning agents., The present work has been supported by the H2020 European project IPERION HS (GA 871034), by Spanish MCIN/AEI, project PID2022-137017OB-I00, by Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and by the Horizon Europe Project, iPhotoCult (Project number: 101132448). Financial support for FixLab TransNational Access (TNA) activities (IPERION HS GA n.871034) for the proposal “FILMS ON TOP - Fluorescence Investigations of Laser-Modified Surfaces for improving Photonics Treatments of Oil Paintings” is gratefully acknowledged. Maestro-Guijarro thanks CSIC for the contract within the framework of the Special Intramural Project (PIE) – ref. 202680E012. Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed