Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Modern Roman-Inspired Concrete with Daytime Radiative Cooling Capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete, Miguel
  • Torres-García, Alicia E.
  • Carlosena, Laura
  • Prabhu, Achutha
  • Ibáñez, Jose A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m- 2 under average solar intensities of 850 W m- 2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m- 2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union'sHorizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 and TED2021-132074B C31-C33 funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR. The authors also thank the Quantum Beams & Sustainable Materials group of the Materials Physics Center for the help with the Confocal Raman measurements and discussions. Finally, JSD acknowledges IQE for providing zeolite sampl, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Carbonated alkali-activated cementitious material with radiative cooling properties for urban heat mitigation

  • Goracci, Guido
  • Adams, Nick
  • De la Fuente, T.S.N.
  • Iturrospe, Amaia
  • Ibáñez, Jose A.
  • Arbe, Arantxa
  • Allacker, Karen
  • Dolado, Jorge S.
Data will be made available on request., Urban areas generate 70% of global CO2 emissions, with cement production contributing 8% while exacerbating urban heat islands that increase cooling demands. To address these interconnected challenges through cleaner production methodologies, this exploratory study developed carbonated alkali-activated cementitious materials through ambient pressure carbonation of upcycled ground granulated blast furnace slag (GGBS) and calcium hydroxide composites (25–75 wt%). Utilizing a low-energy material pelletization technology, specimens were characterized using XRD, TGA, Raman spectroscopy, and SEM. Radiative cooling performance was evaluated through spectral measurements and field testing in desert conditions. The optimized formulation indicates promising exceptional CO2 sequestration (18.6 wt%) through mineralization. Solar reflectance index reached 90, significantly exceeding conventional white concrete (SRI ≈ 80) and approaching commercial cool materials (SRI ≈ 85–119). Field testing demonstrated 16°C lower surface temperatures compared to ordinary Portland cement under 1000 W/m2 solar irradiance in Almeria’s Desert. Microstructural analysis revealed synergistic carbonation-pozzolanic reactions creating dense matrices with hierarchical pore refinement. This dual-benefit approach simultaneously addresses embodied and operational carbon emissions, offering transformative potential for sustainable urban infrastructure. The material’s exceptional cooling performance rivals specialized systems while capturing substantial atmospheric CO2, representing a paradigm shift toward carbon-negative cleaner materials., This work was supported by the COOLCRETE project, which has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101164420. We also acknowledge the support from project TED2021-132074B-C31, funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Additionally, we thank the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete for their collaboration. Some of this work was performed at the Raman facility located at the Materials Physics Center, supported by the IKUR 2030 Strategy of the Department of Science, Universities and Innovation of the Basque Government. Finally, x-ray structural characterization was performed at XRD facility of Centro de Física de materiales, supported by the Grant PID2024-157988NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU and Eusko Jaurlaritza, code: IT1566-22., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

A modern roman-inspired concrete with daytime radiative cooling capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete Díaz, Miguel
  • Torres García, Alicia E.
  • Carlosena Remírez, Laura
  • Prabhu, Achutha
  • Ibáñez, José A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m−2 under average solar intensities of 850 W m−2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m−2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 [i.e. PID2022-137845NB-C21 and PID2022-137845NB-C22] and TED2021-132074B C31-C33 [i.e. TED2021-132074B-C31 and TED2021-132074B-C33] funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR.