Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Petrographic and geochemical evidence for multiphase formation of carbonates in the Martian orthopyroxenite Allan Hills 84001

  • Moyano-Cambero, C. E.
  • Trigo-Rodríguez, Josep María
  • Benito, M. Isabel
  • Alonso-Azcárate, J.
  • Lee, Martin R.
  • Mestres, Narcís
  • Martínez-Jiménez, Marina
  • Martín‐Torres, Francisco J.
  • Fraxedas, J.
Martian meteorites can provide valuable information about past environmental conditions on Mars. Allan Hills 84001 formed more than 4 Gyr ago, and owing to its age and long exposure to the Martian environment, and this meteorite has features that may record early processes. These features include a highly fractured texture, gases trapped during one or more impact events or during formation of the rock, and spherical Fe‐Mg‐Ca carbonates. In this study, we have concentrated on providing new insights into the context of these carbonates using a range of techniques to explore whether they record multiple precipitation and shock events. The petrographic features and compositional properties of these carbonates indicate that at least two pulses of Mg‐ and Fe‐rich solutions saturated the rock. Those two generations of carbonates can be distinguished by a very sharp change in compositions, from being rich in Mg and poor in Fe and Mn, to being poor in Mg and rich in Fe and Mn. Between these two generations of carbonate is evidence for fracturing and local corrosion., This research has been funded by the Spanish Ministry of Science and Innovation (projects: AYA2011‐26,522, AYA 2015‐67175‐P, CTQ2015‐62,635‐ERC, and CTQ2014‐60,119‐P to which J.M. Trigo‐Rodríguez and C.E. Moyano‐Cambero acknowledge financial support). The UK Science and Technology Facilities Council is also thanked for funding through grants ST/H002960/1, ST/K000942/1, and ST/L002167/1. ICN2 and ICMAB acknowledge support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grants SEV‐2013‐0295 and SEV‐2015‐0496, respectively., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Bending tests on building beams containing electric arc furnace slag and alternative binders and manufactured with energy-saving placement techniques

  • Santamaría, Amaia
  • García Llona, Aratz
  • Revilla Cuesta, Víctor
  • Piñero Santiago, Ignacio
  • Ortega López, Vanesa
The environmental impact of the building sector is especially relevant during the construction phase. Both the materials and the construction methods that are currently in use must be reconsidered, in order to minimize the environmental impact of concrete-based structures. This research is therefore focused on achieving greener concrete-based building structures. In this context, the feasibility of careful use of materials for concrete manufacture and the use of construction techniques that can facilitate and reduce energy consumption during placement are both studied. To do so, twelve sample beams were prepared using eight different sustainable high-workability structural concretes. The aim was to maximize the use of the by-products that amounted to over 80% of the concrete mass, steelmaking slags, fly ash, and quarry waste, and to employ energy-saving concrete placement techniques. The beams underwent bending tests in which their mechanical behavior and their compliance with the specifications of the most relevant building codes were verified. The results pointed to the feasibility of increased sustainability in the field of building engineering through the suitable use of selected by-products and techniques., Spanish Ministry MCI, AEI, EU and ERDF [RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/ 03374]; the Junta de Castilla y Le´on (Regional Government) and ERDF [UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135.GI], UPV/EHU (PPGA20/26) and, finally, our thanks also go to the Basque Government research group IT1314-19 and likewise to CHRYSO and HORMOR for supplying the materials for research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Santamaría, Amaia
  • Hernández Bagaces, Jorge J.
  • Ortega López, Vanesa
The addition of by-products, such as recycled concrete aggregate and ground granulated blast furnace slag, modify the in-fresh flowability of ordinary self-compacting concrete both initially and over time. A detailed study is presented in this paper of 18 mixtures (SF3 slump-flow class) containing 100% coarse recycled concrete aggregate, two types of cement (CEM I or CEM III/A, the latter with 45% ground granulated blast furnace slag), different contents of fine recycled concrete aggregate (0, 50, or 100%), and three different aggregate powders (ultra-fine limestone powder <0.063 mm, limestone fines 0/0.5 mm, and recycled concrete aggregate 0/0.5 mm). The temporal evolution of slump flow, viscosity, and passing ability, and the values of segregation resistance, air content, fresh and hardened density, and compressive strength were evaluated in all the mixtures. The addition of fine recycled concrete aggregate and CEM III/A improved initial slump flow and passing ability by 6%, due to their higher proportion of fines. Nevertheless, the temporal loss of flowability within 60 min was 5.8% lower when adding natural aggregate and CEM I. Viscosity and air content increased 26% on average following additions of fine recycled concrete aggregate, unlike with additions of ground granulated blast furnace slag. Flowability and strength increased with the addition of limestone fines 0/0.5 mm. According to multi-criteria analyses, the mixtures with CEM III/A, 50% fine recycled concrete aggregate, and limestone fines 0/0.5 mm showed an optimal balance between their flowability (SF2 slump-flow class 60 min after the mixing process), compressive strengths (around 60 MPa), and carbon footprints., Spanish Ministry MCIU, AEI and ERDF [grant numbers FPU17/03374 and RTI 2018-097079-B-C31]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; the Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135. GI], UPV/EHU (PPGA20/26) and, finally, our thanks also to the Basque Government research group IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Multi-criteria feasibility of real use of self-compacting concrete with sustainable aggregate, binder and powder

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Espinosa González, Ana Belén
  • Ortega López, Vanesa
Replacing natural raw materials with industrial by-products can increase the sustainability of Self-Compacting Concrete (SCC), although its fresh and hardened behavior will usually worsen. The benefits of increased sustainability must therefore outweigh any reduction in concrete flowability and strength. These aspects can be analyzed through Multi-Criteria Decision-Making (MCDM) algorithms. In all, 19 SCC mixes were studied. One reproduced commercial SCC (limestone filler and conventional cement), the others were produced with more sustainable materials: 100% coarse Recycled Concrete Aggregate (RCA); 0%, 50% or 100% fine RCA; 45% Ground Granulated Blast-furnace Slag (GGBS); and sustainable aggregate powders such as limestone fines 0/0.5 mm and RCA powder 0/0.5 mm. Decreased flowability at 15 and at 60 min, compressive strength, modulus of elasticity, carbon footprint, and cost of mix were all studied. Both the carbon footprint and the cost were calculated considering only the composition of the SCC, without including aspects that depend on each particular case study, such as transport distances. These aspects constituted the decision-making criteria of the MCDM analysis, under which 14 scenarios were evaluated with different requirements for SCC, using 3 different algorithms (TOPSIS, AHP, and PROMETHEE). The results suggested that the ideal choice for fast concreting is a combination of GGBS, 100% coarse RCA and limestone fines, although if SCC has to be transported to the concreting point, then conventional cement should be used. Strength and stiffness can be maximized by limiting the fine RCA content to 50%. Finally, considering a versatile choice, only SCC with coarse RCA, limestone fines, GGBS and 0% fine RCA could compete with conventional SCC. Adapting the design to minimize the detrimental effects of by-products is therefore essential to promote sustainable SCC that is also commercially competitive., Spanish Ministry MCIU, AEI and ERDF [grant numbers PID 2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Porosity-based models for estimating the mechanical properties of self-compacting concrete with coarse and fine recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Faleschini, Flora
  • Zanini, Mariano A.
  • Skaf Revenga, Marta
  • Ortega López, Vanesa
Predicting the mechanical properties of Self-Compacting Concrete (SCC) containing Recycled Concrete Aggregate (RCA) generally depends, in great part, on the RCA fraction in use. In this study, predictive equations for estimating SCC mechanical properties are developed through SCC porosity indices, so they are applicable to any RCA fraction and amount that may be used. A total of ten SCC mixes were prepared, nine of which containing different proportions of coarse and/or fine RCA (0%, 50% or 100% for both fractions), and the tenth mixed with 100% coarse and fine RCA, and RCA powder 0–1 mm. The following properties were evaluated: compressive strength, modulus of elasticity, splitting tensile strength, flexural strength, and effective porosity as measured with the capillary-water-absorption test. Negative effects on the above properties were recorded for increasing contents of both RCA fractions. The application of simple regression models yielded porosity-based estimations of the mechanical properties of the SCC with an accuracy margin of ±20%, regardless of the RCA fraction and amount. The results of the multiple regression models with compressive strength as a secondary predictive variable presented even greater robustness with accuracy margins of ±10% and almost no significant effect of accidental porosity variations on prediction accuracy. Furthermore, porosity predictions using the 24-h effective water also yielded accurate estimations of all the above mechanical properties. Finally, comparisons with the results of other studies validated the reliability of the models and their accuracy, especially the minimum expected values at a 95% confidence level, at all times lower than the experimental results., Spanish Ministry of Universities within the framework of the State Program for the Promotion of Talent and its Employability in R + D + i, State Mobility Subprogram, of the State Plan for Scientific and Technical Research and Innovation 2017–2020 [PRX21/00007]; the Spanish Ministry MCI, AEI, EU and ERDF [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231; BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and finally, the University of Burgos [grant numbers SUCONS, Y135.GI] and the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Models for compressive strength estimation through non-destructive testing of highly self-compacting concrete containing recycled concrete aggregate and slag-based binder

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Serrano López, Roberto
  • Ortega López, Vanesa
Indirect estimation of compressive strength through non-destructive testing is key to monitoring the strength of structural concretes used in construction and rehabilitation works. However, no models are available to perform this estimation in highly Self-Compacting Concrete (SCC) with Recycled Concrete Aggregate (RCA). To fill this gap, two indirect measures were tested in this paper, the hammer rebound index and Ultrasonic Pulse Velocity (UPV), to predict the compressive strength of highly SCC. To do so, 24 SCC mixes were developed with different aggregate powders, binders, such as Ground Granulated Blast Furnace Slag (GGBFS), and contents of fine RCA. Compressive strength, and both indirect measures of all mixtures were determined at 1, 7, 28, and 90 days. The development of specific models for highly SCC responded to the inappropriateness of conventional models that are not adapted to its high fines content. Modelling as a function of either UPV or the hammer rebound index yielded accurate predictions, although the UPV model proved more sensitive to compositional changes and presented higher uncertainty. The best predictions were modelled by combining both indirect measures. The models provided safe and accurate indirect estimations of the compressive strength of high flowability SCC in real structures., Spanish Ministry MCIU, AEI and ERDF [grant number FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and, finally, the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Assessment of longitudinal and transversal plastic behavior of recycled aggregate self-compacting concrete: A two-way study

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Santamaría, Amaia
  • Ortega López, Vanesa
  • Manso Villalaín, Juan Manuel
Plastic strain behavior in the transversal direction to the axis of loading has often been underestimated in concrete design and its strength performance. However, as this article demonstrates, it is fundamental to define the viability of using concrete of a certain composition in real applications. In this study, 15 Self-Compacting Concrete (SCC) mixtures produced with Recycled Concrete Aggregate (RCA) and Ground Granulated Blast Furnace Slag (GGBFS) were subjected to a monotonic-load test and a 5-cycle loading/unloading test with increasing maximum loads. Continuous monitoring of the applied loads and the SCC strain was performed. In the transversal direction, these tests caused the appearance of a yield step, cracking by vertical splitting, and higher levels of deformability than in the longitudinal direction. It was concluded that the RCA content of SCC should be defined according to serviceability conditions when used in compressed elements, to safeguard against failure due to transversal plastic strain., Spanish Ministry MCIU, AEI and ERDF [grant numbers FPU17/03374 and RTI2018-097079-B-C31; 10.13039/501100011033]; the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135.GI], UPV/EHU (PPGA20/26) and, finally, our thanks also to the Basque Government research group IT1314-19.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Fiber-reinforcement and its effects on the mechanical properties of high-workability concretes manufactured with slag as aggregate and binder

  • Ortega López, Vanesa
  • García Llona, Aratz
  • Revilla Cuesta, Víctor
  • Santamaría, Amaia
  • San José Lombera, José Tomás
The feasibility of manufacturing fiber-reinforced concretes of high workability through additions of high volumes of electric arc furnace steel slag is evaluated in this paper, using sustainable binders with ground granulated blast furnace slag and ladle furnace slag as a supplementary cementitious material. An extensive experimental plan is developed to test four (self-compacting and pumpable) concrete mixtures, some reinforced with 0.5% vol. of (metallic or synthetic) fibers, in both the fresh and the hardened state. Very specific mechanical aspects are examined, such as the evaluation of both longitudinal and transversal stress-strain compressive behavior, and the assessment of direct tensile strength through the “dog-bone” test. The results of testing this sustainable concrete design yielded suitable mechanical strengths, and good toughness, ductility and impact strength, among other properties. Good adhesion between the fibers and the cementitious matrix was also evident from the fiber pull-out test results. Finally, the overall results confirmed that the use of electric arc furnace steel slag can make a real contribution to construction-sector sustainability and that the mechanical behavior of these novel concretes meets the basic design requirements for use in real structures., Spanish Ministries MCI, AEI, EU and ERDF [RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the Basque Government research group [IT1314-19]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [Y135.GI] and the University of the Basque Country [PPGA20/26]. Likewise, our thanks to CHRYSO and HORMOR for supplying the materials used in this research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Validation of slag-binder fiber-reinforced self-compacting concrete with slag aggregate under field conditions: Durability and real strength development

  • Ortega López, Vanesa
  • Faleschini, Flora
  • Pellegrino, Carlo
  • Revilla Cuesta, Víctor
  • Manso Villalaín, Juan Manuel
The environmental conditions to which a concrete may be exposed will condition its real range of use. Thus, concrete behavior must, at all times, be verified under a wide variety of environmental conditions, in order to ensure its real applicability. In this study, the real strength development and durability behavior of a fiber-reinforced self-compacting concrete is analyzed. This particular concrete incorporates 100% coarse (4/12 mm) and fine (0/4 mm) Electric Arc Furnace Slag (EAFS) as aggregate, as well as limestone fines as aggregate powder (0/1.18 mm). Furthermore, Ground Granulated Blast Furnace Slag (GGBFS) was also added as binder. Four mixtures with and without either metallic or synthetic fibers, and different GGBFS contents were designed. Real strength development was evaluated in all the mixes by comparing the strength development of both cores extracted from full-scale beams and wet-cured laboratory specimens. The durability behavior was analyzed by Mercury Intrusion Porosimetry (MIP), freeze/thaw, moist/dry, sulfate-attack, chloride-penetration, carbonation, and SO2-attack tests. On the one hand, the long-term mechanical properties of the cores (real conditions) were similar to the properties of the specimens cured in a moist chamber for 90 days in all the mixes. On the other, the increase in water content when adding fibers to maintain flowability, as well as the addition of GGBFS, resulted in an increase in MIP porosity. Therefore, the use of fibers, both metallic and synthetic, slightly worsened the durability behavior of the concrete, facilitating the entry of aggressive external agents. Nevertheless, the increased flexibility of the cementitious matrix when adding GGBFS was beneficial against moist/dry and sulfate-attack phenomena, despite the increase in porosity. Overall, the mixes complied with the regulatory requirements for use in aggressive environments, although the amounts of fibers and GGBFS should be carefully studied., Spanish Ministry of Universities within the framework of the State Program for the Promotion of Talent and its Employability in R + D + i, State Mobility Subprogram, of the State Plan for Scientific and Technical Research and Innovation 2017-2020 [PRX21/00007]; the Spanish Ministry of Universities, MICINN, AEI, EU and ERDF [grant numbers PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [grant numbers UIC-231; BU119P17]; Youth Employment Initiative (JCyL) and ESF [grant number UBU05B_1274]; and finally, to the University of Burgos [grant numbers SUCONS, Y135.GI] and the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Shear strength assessment of reinforced concrete components containing EAF steel slag aggregates

  • Santamaría, Amaia
  • Romera, Jesús María
  • Marcos, Ignacio
  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
Electric Arc Furnace (EAF) slag can be reused as aggregate in Portland cement concrete mixes. The addition of EAFS and other waste co-products (fly ash, blast furnace slag) will modify the binding properties and will, importantly, enhance the global sustainability of such concretes. These mix designs offer acceptable pumpability and self-compaction in the fresh state and can be reinforced with fibers. In this study, eight different concrete mixes are designed within the range of medium-strength concretes (30–50 MPa) and are characterized in both the fresh and the hardened state. Large concrete volumes are used to pour reinforced beams, which are then subjected to small-span high-load tests to evaluate their resistance to shear stress, by analyzing two types of transversal (shear) reinforcement. The tests yielded promising results, contributing additional evidence on the viability of using recycled EAFS aggregate in structural applications. The mechanical behavior of these concretes was closely correlated with the strength predictions calculated with the formulas listed in various international standards., Spanish Ministry of Universities, MICINN, AEI, EU and ERDF [PID2020-113837RB-I00; RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León and ERDF [UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; the University of Burgos [grant number SUCONS, Y135.GI], and, finally, our thanks also go to the SAREN research group (IT1619-22, Basque Government).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Bituminous base courses for flexible pavements with steel slags

  • Skaf Revenga, Marta
  • Bartolomé González, Javier
  • Gonzalo Orden, Hernán
  • Linares Unamunzaga, Alaitz
  • Ortega López, Vanesa
  • Manso Villalaín, Juan Manuel
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, The purpose of this research was to study the feasibility of incorporating steel slags into coarse bituminous mixtures. The objective was twofold: to reduce dependence on natural aggregates, and to provide a use for industrial by-products. The slags studied come from the manufacture of carbon steel in electric furnaces and are divided into two types: Electric Arc Furnace (EAF) slag and Ladle Furnace (LF) slag. The mixture designed is coarse bituminous concrete (AC22G), for base courses in flexible pavements. In a first phase, the physical characterization of the materials was carried out to check their suitability. In a second phase, three types of mixes were designed: a control mix (made with natural limestone aggregates), a mix where LF slag was introduced to replace the filler and the fine fraction (sand) of the mix; and finally, the feasibility of manufacturing a totally sustainable mix was analyzed, which would fully incorporate EAF slag as coarse aggregate and LF slag as fine aggregate and filler. In a third and final phase, the designed mixes were subjected to different mechanical, water sensitivity, and durability tests. The research demonstrated that the incorporation of EAF and LF steel slag as a substitute for natural aggregate in coarse bituminous mixtures is feasible, meeting regulatory requirements, improving sustainability in the construction industry, as well as reducing emissions, and contributing to climate change mitigation., This work was supported by the Junta de Castilla y León (Regional Government) and ERDF [grant number UIC-231, BU119P17] and the University of Burgos [grant number SUCONS, Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Elastic stiffness estimation of aggregate–ITZ system of concrete through matrix porosity and volumetric considerations: explanation and exemplification

  • Revilla Cuesta, Víctor
  • Skaf Revenga, Marta
  • Santamaría, Amaia
  • Romera, Jesús María
  • Ortega López, Vanesa
The modulus of elasticity of a concrete depends on the elastic stifness of both the cementitious matrix and the aggregate–ITZ system, which includes any slippage mechanisms under loading between the aggregate and the cementitious matrix within the interfacial transition zone (ITZ). A procedure is presented in this paper to estimate the elastic stifness of an aggregate–ITZ system within a cementitious matrix, by considering the relative volumes and the porosities of the concrete components. The method was validated by determining the elastic stifness of both the limestone–ITZ and the electric arc furnace slag (EAFS)–ITZ systems when embedded in a slag-based cementitious matrix. The greater stifness of the EAFS–ITZ system in comparison with the natural aggregate system explained the higher strength and modulus of elasticity of the concrete following additions of EAFS. Moreover, having determined those parameters, the elastic moduli of concretes with a similar cementitious matrix could then be accurately estimated., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The authors wish to express their gratitude for funding this research work to the Spanish Ministry of Universities, MICINN, AEI, EU and ERDF [PID2020-113837RBI00; PID2021-124203OB-I00; RTI2018-097079-B-C31; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the Basque Regional Government through the consolidated research group SAREN [IT1619-22]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; and, fnally, the University of Burgos [Y135.GI].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Hammer rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate

  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
  • Faleschini, Flora
  • Espinosa González, Ana Belén
  • Serrano López, Roberto
The hammer rebound index has traditionally been solely and exclusively used to estimate the compressive strength of vibrated concrete. Its use has recently been extended to the prediction of the compressive strength of Self-Compacting Concrete (SCC) and concrete produced with Recycled Concrete Aggregate (RCA). The conventional use of the hammer-rebound test is further developed in this paper, by demonstrating how it can be used to estimate the overall mechanical behavior of SCC containing RCA. To do so, nine SCC mixes with different contents and fractions (coarse, fine, and powder) of RCA are analyzed. Following a simple-linear-regression validation and property standardization procedure, the hammer rebound index is then expressed as a linear combination of four mechanical properties, adjusted through a multiple regression. The hammer rebound index is therefore expressed as a weighting of both the mean value of compressive behavior (arithmetic mean of compressive strength and modulus of elasticity) amounting to a weight of 72.8%, and the mean value of bendingtensile behavior (arithmetic mean of splitting tensile strength and flexural strength) amounting to a weight of 27.2%. The hammer rebound index can therefore be construed as an overall-mechanical-quality performance indicator of the SCC containing RCA, which can also yield predictions of every mechanical property. In this way, the application of the hammer rebound index could likewise be of use in rehabilitation, pathology, and healthmonitoring works where a full characterization of the mechanical performance of SCC with RCA is required, facilitating the use of SCC with RCA in real structures., The authors wish to express their gratitude to the following government ministries, agencies, and universities for funding this research: the Spanish Ministry of Universities, MICIN, AEI, EU, ERDF and NextGenerationEU/ PRTR [PID2020-113837RB-I00; 10.13039/501100011033; TED2021- 129715B-I00; FPU17/03374; PRX21/00007]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; the University of Burgos [SUCONS, Y135.GI]; and, finally, the University of Padova.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

An alternative experimental methodology to determine the diagonal cracking resistance of steel-reinforced concrete beams

  • Romera, Jesús María
  • Marcos, Ignacio
  • Skaf Revenga, Marta
  • Ortega López, Vanesa
An alternative experimental method for predicting the diagonal shear cracking resistance of steel-reinforced concrete beams is developed in this paper. Conventional extensometric strain-gauge rosettes are placed on the lateral surfaces of a set of four beams. As diagonal cracking propagates through the beams, the load–strain curves flatten out at a plateau and the mechanical property under consideration may be determined. The method is applied to four beams cast from pumpable and self-compacting concrete mixes with cement types I and IV containing electric arc furnace slag aggregates. The feasibility of applying standard design code formulas to the concretes containing these aggregates may therefore be studied and compared with other recent research works. Accurate experimental results were obtained with this method without having to interrupt the test for subjective visual appraisals of the test specimen., The authors wish to express their gratitude to: the Spanish Ministry MICINN, AEI and ERDF [RTI2018-097079-BC31; PID2020-113837RB-I00; 10.13039/501100011033; FPU17/03374]; the Junta de Castilla y León (Regional Government) and ERDF [UIC-231, BU119P17]; Youth Employment Initiative (JCyL) and ESF [UBU05B_1274]; and the University of the Basque Country [PPGA20/26] and University of Burgos [SUCONS, Y135.GI] for additional funding. Our thanks also go to the Basque Government research group [IT1314-19] and likewise to CHRYSO and HORMOR for supplying the materials used in this research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

¿Por qué el efecto del árido de hormigón reciclado en la resistencia a compresión del hormigón autocompactante no es homogéneo? Una revisión bibliográfica, Why is the effect of recycled concrete aggregate on the compressive strength of self-compacting concrete not homogeneous? A bibliographic review

  • Revilla Cuesta, Víctor
  • Ortega López, Vanesa
  • Skaf Revenga, Marta
  • Fiol Olivan, Francisco
  • Manso Villalaín, Juan Manuel
La presente revisión bibliográfica profundiza en cómo las características del Árido de Hormigón Reciclado (AHR) afectan al comportamiento resistente del Hormigón AutoCompactante (HAC) y cómo el efecto esperado del AHR puede alterarse por cambios en la composición del HAC. Se demuestra que, si la trabajabilidad del HAC se mantiene constante, la resistencia a compresión disminuye linealmente con el contenido de AHR, aunque este descenso será menor si el AHR procede del machaqueo de un hormigón de mayor resistencia. La disminución de la relación agua/cemento permite compensar esta pérdida de resistencia, aunque su valor debe permitir también mantener una adecuada trabajabilidad del HAC. La absorción de agua del AHR y su interacción con otros compontes incrementan la variabilidad del efecto del AHR. Debido a la gran cantidad de factores implicados en este comportamiento, es recomendable un estudio experimental del AHR y del HAC producido con él antes de su utilización., This literature review deepens in how the properties of Recycled Concrete Aggregate (RCA) affect the strength behavior of Self-Compacting Concrete (SCC) and how the expected effect of RCA can be modified by changes in its composition. It is demonstrated that, if the flowability of the SCC remains constant, the compressive strength decreases linearly with the RCA content, although this decrease is lower if the RCA is obtained from the crushing of a concrete with higher strength. The decrease of the water-to-cement ratio allows compensating this loss of strength, although its value should also allow keeping a suitable flowability. The water absorption of RCA and its interaction with other components of the mix increase the variability of the effect of RCA. Therefore, due to the large number of factors involved in this behavior, it is recommended to experimentally study the RCA and the SCC produced with it before its use., El presente trabajo ha sido financiado por el Ministerio de Ciencia e Innovación (MCINN), la Agencia Estatal de Investigación (AEI) y el Fondo Europeo De Desarrollo Regional (FEDER) [código ayuda FPU 17/03374]; la Junta de Castilla y León (JCyL) y el Fondo Europeo De Desarrollo Regional (FEDER) [código proyecto UIC-231; BU119P17]; la iniciativa de empleo juvenil de la Junta de Castilla y León y el Fondo Social Europeo (ESF) [código ayuda UBU05B_1274]; y, finalmente, la Universidad de Burgos (UBU) [código ayuda SUCONS, Y135.GI]. Los autores desean agradecer a todas estas instituciones su apoyo en este estudio.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Petrographic and geochemical evidence for multiphase formation of carbonates in the Martian orthopyroxenite Allan Hills 84001

  • Moyano-Cambero, Carles Eduard|||0000-0002-1543-8377
  • Trigo-Rodríguez, J.M.|||0000-0001-8417-702X
  • Benito, M. Isabel
  • Alonso-Azcárate, Jacinto
  • Lee, Martin R.
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Martínez-Jiménez, Marina
  • Martín-Torres, Francisco J.
  • Fraxedas, Jordi|||0000-0002-2821-4831
Martian meteorites can provide valuable information about past environmental conditions on Mars. Allan Hills 84001 formed more than 4 Gyr ago, and owing to its age and long exposure to the Martian environment, and this meteorite has features that may record early processes. These features include a highly fractured texture, gases trapped during one or more impact events or during formation of the rock, and spherical Fe-Mg-Ca carbonates. In this study, we have concentrated on providing new insights into the context of these carbonates using a range of techniques to explore whether they record multiple precipitation and shock events. The petrographic features and compositional properties of these carbonates indicate that at least two pulses of Mg- and Fe-rich solutions saturated the rock. Those two generations of carbonates can be distinguished by a very sharp change in compositions, from being rich in Mg and poor in Fe and Mn, to being poor in Mg and rich in Fe and Mn. Between these two generations of carbonate is evidence for fracturing and local corrosion.