Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optimization of pulsed thermoelectric materials using simulated annealing and non-linear finite elements

  • Moreno-Navarro, Pablo|||0000-0002-2787-976X
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
  • Pérez-Aparicio, José L.
[EN] The objective of this work is to determine the optimal shape, gains and duration of an electric pulse applied to a Peltier cell, together with the length of the thermoelectric to maximize cooling while min- imizing electric consumption. For this purpose, a fully coupled, multiphysics, dynamic finite-element model, which solves for the thermal, electric and mechanical fields is used. Because of the demanding computing requirements of the optimization process, a special mesh is designed and a convergence anal- ysis is carried out before using the multiphysics model. The highly non-linear optimization is done by simulated annealing, a heuristic algorithm in the Markov chain Monte-Carlo family. A preliminary para- metric investigation is presented, analyzing the impact of some of the parameters. The results of this pre- liminary analysis help to understand the effect of the different shapes in the evolution of the cold face temperature. Some of these results are expected and have already been discussed elsewhere, but others can only be explained after further analysis and a full system modeling. Pulse optimization is multiobjec- tive and multiparametric, i.e., it can consider several targets such as maximizing the cooling temperature, the cooling duration or others. The trade-offs between the different targets are studied. In all cases, stres- ses inside the thermoelement are examined at all points, and the pulses must meet the restriction that an equivalent stress is not above the allowable value., This research was partially supported by the grants, Haut-de-France Region (CR Picardie, 120-2015-RDISTRUCT-000010), EU funding (FEDER, RDISTRUCT-000010) for Chaire-de-Mecanique, and Spanish Ministry of Economy and Competitiveness grant CGL2014-59841-P. These supports are gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasticity coupled with thermo-electric fields: Thermodynamics framework and finite element method computations

  • Moreno-Navarro, Pablo
  • Ibrahimbegovic, Adnan
  • Pérez-Aparicio, José L.
[EN] A consistent thermodynamic-based theoretical framework and three-dimensional finite element formulation is pre- sented, capable of coupling elastic, thermal and electric fields. The complete set of governing equations are obtained from conservation principles for electric charge, energy and momentum. The second principle of thermodynamics is taken into account to introduce the irreversible phenomena, such as plastic dissipation or Joule heating. The constitu- tive relations are derived consistently from the Helmholtz free-energy potential for each corresponding dual variable in terms of the defined set of state variables. We consider the case of linear isotropic hardening model for plasticity, and provide the consistent form of the tangent thermo-electro-elastoplastic modulus through dual variable computa- tions. The latter plays the crucial role in ensuring fast convergence properties of the finite element computations with the proposed coupled plasticity model. The implementation is carried out in a research version of the well-known computer code FEAP. Several numerical simulations are presented in order to illustrate the proposed model and for- mulation capabilities for providing an enhanced formulation of an important practical application in terms of Peltier cells., This work was supported jointly by Haut-de-France Region (CR Picardie) (120-2015-RDISTRUCT-000010 and RDISTRUCT-000010) and EU funding (FEDER) for Chaire-de-Mecanique-Numerique (contract Ref. 120-2015-RDISTRUCTF-000010 and RDISTRUCTI-000004). This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Linear elastic mechanical system interacting with coupled thermo-electro-magnetic fields

  • Moreno-Navarro, Pablo|||0000-0002-2787-976X
  • Ibrahimbegovich, A.
  • Pérez-Aparicio, José L.
[EN] A fully-coupled thermodynamic-based transient finite element formulation is proposed in this article for electric, magnetic, thermal and mechanic fields interactions limited to the linear case. The governing equations are obtained from conservation principles for both electric and magnetic flux, momentum and energy. A full-interaction among different fields is defined through Helmholtz free-energy potential, which provides that the constitutive equations for corresponding dual variables can be derived consistently. Although the behavior of the material is linear, the coupled interactions with the other fields are not considered limited to the linear case. The implementation is carried out in a research version of the research computer code FEAP by using 8-node isoparametric 3D solid elements. A range of numerical examples are run with the proposed element, from the relatively simple cases of piezoelectric, piezomagnetic, thermoelastic to more complicated combined coupled cases such as piezo-pyro-electric, or piezo-electro-magnetic. In this paper, some of those interactions are illustrated and discussed for a simple geometry., This work was supported jointly by Hauts-de-France Region (CR Picardie) (120-2015-RDISTRUCT-000010 and RDISTRUCT-000010) and EU funding (FEDER) for Chaire-de-Mecanique (120-2015-RDISTRUCTF-000010 and RDISTRUCTI-000004). Also, by the grant Ministerio de Educacion, Cultura y Deporte PRX16/00501. This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-scale model for coupled piezoelectric-inelastic behavior

  • Moreno-Navarro, Pablo|||0000-0002-2787-976X
  • Ibrahimbegovic, Adnan
  • Damjanovic, Dragan
[EN] In this work, we present the development of a 3D lattice-type model at microscale based upon the Voronoi-cell representation of material microstructure. This model can capture the coupling between mechanic and electric fields with non-linear constitutive behavior for both. More precisely, for electric part we consider the ferroelectric constitutive behavior with the possibility of domain switching polarization, which can be handled in the same fashion as deformation theory of plasticity. For mechanics part, we introduce the constitutive model of plasticity with the Armstrong-Frederick kinematic hardening. This model is used to simulate a complete coupling of the chosen electric and mechanics behavior with a multiscale approach implemented within the same computational architecture., This article was supported jointly by Hauts-de-France Region (CR Picardie) (1202015RDISTRUCT-000010 and RDISTRUCT-000010) and EU funding (FEDER) for Chair of Mechanics (120-2015-RDISTRUCTF-000010 and RDISTRUCTI-000004), IUF-Institut Universitaire de France and by Germaine de Stael Collaborative Program between France and Switzerland. All this support is gratefully acknowledged.