Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards the automatic layout synthesis in resonant-type metamaterial transmission lines

  • Selga, J.
  • Rodriguez Perez, Ana Maria
  • Gil, M.
  • Carbonell Olivares, Jorge
  • Martin, F.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The first approach towards the automatic layout generation of resonant-type metamaterial transmission lines by using space mapping optimisation is reported. Specifically, the so-called aggressive space mapping (ASM) technique is applied for synthesising microstrip lines loaded with complementary split ring resonators (CSRRs). From a certain set of elements of the circuit model of the unit cell of such lines (which is typically derived from system specifications), the topology (layout) of the CSRR-loaded microstrip line, providing the same electromagnetic response as the circuit model (within certain error limits), is generated automatically. This synthesis technique is of paramount importance for the design of metamaterial-based (or inspired) circuits implemented by means of electrically small resonators such as CSRRs and SRRs. Although the reported technique is applied here to the synthesis of a negative permittivity structure (CSRR-loaded line), the basics towards the extension of the technique to other artificial transmission lines are clearly established., This work has been supported by MEC (Spain) through the projects TEC2007-68013-C02 METAINNOVA and TEC2007-67630-C03 CABESERES and by MCI (Spain) through the project EMET CSD2008-00066 of the CONSOLIDER Ingenio 2010 Program. The authors especially thank Generalitat de Catalunya for funding CIMITEC and for supporting GEMMA through the project 2009SGR-421. The Ministerio de Education (Spain) has given an FPU grant to J.S. with reference AP2008-04707.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Orellana, Marco
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models., This work has been partially supported by MICIIN-Spain (Projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 AVANSAT, CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707), Generalitat de Catalunya (Project 2009SGR-421), and MITyC-Spain (Project TSI-020100-2010-169 METASINTESIS). Ferran Martin is in debt to ICREA for supporting his work through an ICREA Academia Award (calls 2008 and 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of split-rings-based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these arti ficial lines, has been developed.The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a n ovel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool., This work was supported in part by MICIIN-Spain under Project TEC2010-17512 METATRANSFER, Project TEC2010-21520-C04-01, Project CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707, Generalitat de Catalunya under Project 2009SGR-421, and MITyC-Spain under Project TSI-020100-2010-169 METASINTESIS.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synthesis of split rings based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these artificial lines, has been developed. The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a novel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Recent advances in multiband printed antennas based on metamaterial loading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
It is shown that printed antennas loaded with metamaterial resonators can be designed to exhibit multiband functionality. Two different antenna types and metamaterial loading are considered: (i) printed dipoles or monopoles loaded with open complementary split ring resonators (OCSRRs) and (ii) meander line or folded dipole antennas loaded with split ring resonators (SRRs) or spiral resonators (SRs). In the first case, multiband operation is achieved by series connecting one or more OCSRRs within the dipole/monopole. Such resonators force opens at their positions, and by locating them at a quarter wavelength (at the required operating frequencies) from the feeding point, it is possible to achieve multiple radiation bands. In the second case, dual-band functionality is achieved through the perturbation of the antenna characteristics caused by the presence of the metamaterial resonators. This latter strategy is specially suited to achieve conjugate matching between the antenna and the chip in radiofrequency identification (RFID) tags at two of the regulated UHF-RFID bands.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual-band impedance-matching networks based on split-ring resonators for applications in RF identification (RFID)

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the design of dual-band impedance-matching networks of interest in RF identification (RFID) systems. By cascading an impedance-matching network between the chip and antenna, the performance of the RFID tags can be improved. The main aim of this study is to demonstrate the possibility of designing such networks by means of split-ring resonators coupled to microstrip transmission lines. These resonators are especially useful in this design since their equivalent circuit substantially simplifies the parameter calculation of the matching network. Dual-band conjugate matching at two different frequencies, f1=867 MHz and f2=915 MHz, corresponding to the assigned bands for UHF RFID in Europe and the U.S., respectively, is demonstrated. The main difficulty for the synthesis of these dual-band matching networks relies on the proximity of f1 and f2 . Although the chip impedance cannot be considered a design parameter, the network design can be alleviated by allowing certain flexibility in the antenna stage. The fabricated prototype, a dual-band impedance-matching network based on split-ring resonators and loaded with a slot antenna, was characterized by measuring its reflection coefficient. The results reveal that conjugate matching at the above-cited frequencies for the chip impedance under consideration is achieved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual-band UHF-RFID tags based on meander line antennas loaded with spiral resonators

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The purpose of this letter is to implement dual-band tags for ultrahigh-frequency (UHF) radio frequency identification (RFID) applications operative in Europe and the US. Since the regulated bands of UHF-RFID in Europe (867 MHz) and the US (915 MHz) are close, broadband tags might be also considered. However, it is demonstrated in this letter that the performance of dual-band tags designed to operate at the frequency bands of interest is superior to that of broadband (monoband) tags. A meander-line antenna (MLA) has been considered for tag implementation. The dual-band functionality is achieved through a perturbation method consisting of coupling an electrically small resonator [a two-turn spiral resonator (2-SR)] to the antenna. The analysis, design, and fabrication of a dual-band UHF-RFID tag has been carried out. The measured performance of the fabricated prototype is in good agreement with theory. Measured read ranges of 6 and 8 m at the European and US frequency bands, respectively, have been obtained.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Printed Magnetoinductive-Wave (MIW) delay lines for chipless RFID Applications

  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel fully passive and electromagnetic chipless radiofrequency identification (RFID) system is proposed. The system is based on printed tags implemented with magnetoinductive-wave (MIW) delay lines. Such lines are composed of a periodic array of coupled square split ring resonators (SSRRs) and propagate slow waves. The tag is codified by introducing reflectors (which provide the identification signature) between the elements of the array. When the tags are interrogated with a pulse in time domain, they produce replicas at the positions where the reflectors are placed. Thanks to the slow group velocity of the MIW delay line, the replicas of the original pulse are not overlapped in time domain and can be demodulated, thus providing the identification code of the tag. The design considerations to implement these chipless tags are studied in the present work. Moreover, a complete set of codified MIW lines for a two-bit system is designed, manufactured and measured. The reported experimental results validate the proposed approach.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fundamental-mode Leaky-Wave Antenna (LWA) using slotline and Split-Ring-Resonator (SRR)-based metamaterials

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A new composite right/left-handed (CRLH) slotline leaky-wave antenna (LWA) is proposed. The antenna, implemented by loading a slotline with split-ring resonators (SRRs), is designed to exhibit a balanced dispersion relation, with a continuous transition between the left-handed and the right-handed bands at 2.5 GHz. Since the periodicity of the structure is much less than a wavelength, the proposed LWA belongs to the family of quasi-uniform LWAs, and it radiates from the fundamental mode (contrary to periodic LWAs). Measured and simulated radiation patterns, gain, and scanning angle are reported for a 17-cell LWA. The experimental results demonstrate the potential of the LWA to continuously radiate from backward (- 50°) to forward (+60°) scanning angles, with maximum gains of 7.1 and 11.3 dB in the left- and right-handed bands, respectively, and specular radiation patterns.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An approach for the design of passive UHF-RFID tags mounted on optical discs

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this paper, an innovative design strategy for UHF-RFID tags mounted on optical discs (such as DVDs) is presented. By using the metal layer of the disc as the main radiating element, it is possible to overcome the severe limitations of the existing tags for disc identification in terms of read range and bandwidth. The design and synthesis process, based on the proposed circuit model of the tag, is described. A worldwide UHF-RFID tag prototype, for direct mounting on a DVD disc, is designed and fabricated. The measured read range demonstrates that the presented method drastically improves the performance within the whole UHF-RFID band (840-930 MHz), in comparison to the DVD tags found in the available literature.