Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

BiVO4 Fern Architectures, A Competitive Anode for Lithium-Ion Batteries

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Patil, Deepak R.
  • Patil, Santosh S.
  • Munirathnam, N. R.
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
The development of high-performance anode materials for lithium-ion batteries (LIBs) is currently subject to much interest. In this study, BiVO fern architectures are introduced as a new anode material for LIBs. The BiVO fern shows an excellent reversible capacity of 769 mAh g (ultrahigh volumetric capacity of 3984 mAh cm) at 0.12 A g with large capacity retention. A LIB full cell is then assembled with a BiVO fern anode and LiFePO (LFP, commercial) as cathode material. The device can achieve a capacity of 140 mAh g at 1C rate, that is, 81 % of the capacity of the cathode and maintained to 104 mAh g at a high rate of 8C, which makes BiVO a promising candidate as a high-energy anode material for LIBs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fern-like rGO/BiVO4 hybrid nanostructures for high-energy symmetric supercapacitor

  • Patil, Santosh S.
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Deonikar, Virendrakumar G.|||0000-0001-6603-8333
  • Tamboli, Mohaseen S.|||0000-0003-1749-2681
  • Ambekar, Jalindar D.|||0000-0001-9844-2883
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Kolekar, Sanjay S.|||0000-0002-4367-6014
  • Kale, Bharat B.|||0000-0003-0556-9477
  • Patil, Deepak R.
Herein, we demonstrate the synthesis of rGO/BiVO hybrid nanostructures by facile hydrothermal method. Morphological studies reveal that rGO sheets are embedded in the special dendritic fern-like structures of BiVO. The rGO/BiVO hybrid architecture shows the way to a rational design of supercapacitor, since these structures enable easy access of electrolyte ions by reducing internal resistance. Considering the unique morphological features of rGO/BiVO hybrid nanostructures, their supercapacitive properties were investigated. The rGO/BiVO electrode exhibits a specific capacitance of 151 F/g at the current density of 0.15 mA/cm. Furthermore, we have constructed rGO/BiVO symmetric cell which exhibits outstanding volumetric energy density of 1.6 mW h/cm (33.7 W h/kg) and ensures rapid energy delivery with power density of 391 mW/cm (8.0 kW/kg). The superior properties of symmetric supercapacitor can be attributed to the special dendritic fern-like BiVO morphology and intriguing physicochemical properties of rGO.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanostructured mixed transition metal oxides for high performance asymmetric supercapacitors, Facile synthetic strategy

  • Tajik, Sanaz|||0000-0003-2513-3232
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Yadegari, Amir
  • Rashidi, Alimorad|||0000-0001-6753-1939
  • Nasernejad, Bahram
  • Siddique, Inamuddin|||0000-0003-0524-9940
  • Asiri, Abdullah M.|||0000-0001-7905-3209
Exceptionally simple and cost-effective solid-state method is reported for the synthesis of different mixed transition metal oxides (MTMOs) including FeCoO, MnCoO and ZnCoO with unique nanostructures. The morphological analysis show that MTMOs possess distinct nanostructures such as tetragonal, spherical nanoparticles and hexagonal nanosheets. Furthermore, these MTMOs showed excellent supercapacitive properties with specific capacitances of 660-1263 F/g at current density of 2 A/g. Asymmetric capacitor was fabricated with FeCoO as positive and activated carbon as negative electrode which exhibits a specific capacitance of 88 F/g with energy density of 24 Wh/kg (1.1 mWh/cm) and cycle life (93%) over 5000 cycles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electroactive graphene nanofluids for fast energy storage

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Graphenes have been extensively studied as electrode materials for energy storage in supercapacitors and batteries, but always as solid electrodes. The conception and development of graphene electroactive nanofluids (ENFs) reported here for the first time provides a novel way to 'form' graphene electrodes and demonstrates proof of concept for the use of these liquid electrodes for energy storage in novel flow cells.Astabilized dispersion of reduced graphene oxide (rGO) in aqueous sulfuric acid solution was shown to have capacitive energy storage capabilities parallel to those of solid electrode supercapacitors (169 F g(rGO)) but working up to much faster rates (from 1mV s to the highest scan rate of 10 V s) in nanofluids with 0.025, 0.1 and 0.4 wt% rGO, featuring viscosities very close to that of water, thus being perfectly suitable for scalable flow cells. Our results provide proof of concept for this technology and include preliminary flow cell performance of rGO nanofluids under static and continuous flow conditions. Graphene nanofluids effectively behave as true liquid electrodes with very fast capacitive storage mechanism and herald the application not only of graphenes but also other 2D materials like MoS in nanofluids for energy storage and beyond.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Aqueous synthesis of LiFePO4 with Fractal Granularity

  • Cabán Huertas, Zahilia
  • Ayyad, Omar
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Lithium iron phosphate (LiFePO) electrodes with fractal granularity are reported. They were made from a starting material prepared in water by a low cost, easy and environmentally friendly hydrothermal method, thus avoiding the use of organic solvents. Our method leads to pure olivine phase, free of the impurities commonly found after other water-based syntheses. The fractal structures consisted of nanoparticles grown into larger micro-sized formations which in turn agglomerate leading to high tap density electrodes, which is beneficial for energy density. These intricate structures could be easily and effectively coated with a thin and uniform carbon layer for increased conductivity, as it is well established for simpler microstructures. Materials and electrodes were studied by means of XRD, SEM, TEM, SAED, XPS, Raman and TGA. Last but not least, lithium transport through fractal LiFePO electrodes was investigated based upon fractal theory. These water-made fractal electrodes lead to high-performance lithium cells (even at high rates) tested by CV and galvanostatic charge-discharge, their performance is comparable to state of the art (but less environmentally friendly) electrodes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Capacitive vs Faradaic Energy Storage in a Hybrid Cell with LiFePO4/RGO Positive Electrode and Nanocarbon Negative Electrode

  • Cabán Huertas, Zahilia
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Ayyad, Omar
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
We report an advanced device based on a Nitrogen-doped Carbon Nanopipes (N-CNP) negative electrode and a lithium iron phosphate (LiFePO) positive electrode. We carefully balanced the cell composition (charge balance) and suppressed the initial irreversible capacity of the anode in the round of few cycles.We demonstrated an optimal performance in terms of specific capacity 170 mAh/g of LiFePO with energy density of about 203 Wh kg and a stable operation for over 100 charge-discharge cycles. The components of this device (combining capacitive and faradaic electrodes) are low cost and easily scalable. This device has a performance comparable to those offered by the present technology of LIBs with the potential for faster charging; hence, we believe that the results disclosed in this work may open up new opportunities for energy storage devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

V2O5 encapsulated MWCNTs in 2D surface architecture, complete solid-state bendable highly stabilized energy efficient supercapacitor device

  • Pandit, Bidhan
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Kale, Bharat B.|||0000-0003-0556-9477
  • Sankapal, Babasaheb R.
A simple and scalable approach has been reported for O encapsulation over interconnected multi-walled carbon nanotubes (MWCNTs) network using chemical bath deposition method. Chemically synthesized O/MWCNTs electrode exhibited excellent charge-discharge capability with extraordinary cycling retention of 93% over 4000 cycles in liquid-electrolyte. Electrochemical investigations have been performed to evaluate the origin of capacitive behavior from dual contribution of surface-controlled and diffusion-controlled charge components. Furthermore, a complete flexible solid-state, flexible symmetric supercapacitor (FSS-SSC) device was assembled with O/MWCNTs electrodes which yield remarkable values of specific power and energy densities along with enhanced cyclic stability over liquid configuration. As a practical demonstration, the constructed device was used to lit the 'VNIT' acronym assembled using 21 LED's.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Towards flexible solid-state supercapacitors for smart and wearable electronics, Recent Advances in Flexible Solid-State Supercapacitors

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Chodankar, Nilesh R.|||0000-0002-1174-2064
  • Kim, Do-Heyoung|||0000-0001-7949-2252
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mimics of microstructures of Ni substituted Mn1-xNixCo2O4 for high energy density asymmetric capacitors

  • Tamboli, Mohaseen S.|||0000-0003-1749-2681
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Patil, Santosh S.
  • Shaikh, Asiya F.
  • Deonikar, Virendrakumar G.|||0000-0001-6603-8333
  • Kulkarni, Milind V.
  • Maldar, Noormahamad N.
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Kale, Bharat B.|||0000-0003-0556-9477
  • Patil, Deepak R.
The preparation of nanostructured hierarchical MnNiCoO metal oxides as efficient supercapacitors of different structures and configurations especially for the miniaturized electronics is still a challenge. In this context, we report template free facile hydrothermal synthesis of hierarchical nanostructured MnNiCoO with excellent supercapacitive performance. Significantly, the morphology of pure MnCoO transformed from 3D microcubes to 1D nanowires with incorporation of Ni. The electrochemical study shows highest specific capacitance i.e. 1762 F/g for MnNiCoO with high cycling stability of 89.2% which is much higher than pristine MnCoO and NiCoO. Later, asymmetric capacitor has been fabricated successfully using MnNiCoO nanowires as positive electrode and activated carbon (AC) as negative electrode in a KOH aqueous electrolyte. An asymmetric cell could be cycled reversibly in the high-voltage range of 0-1.5 V and displays intriguing performances with a specific capacitance of 112.8 F/g (6.87 F/cm) and high energy density of 35.2 Wh/kg (2.1 mWh/cm). Importantly, this asymmetric capacitor device exhibits an excellent long cycle life along with 83.2% specific capacitance retained after 2000 cycles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrathin Mesoporous RuCo2O4 Nanoflakes, An Advanced Electrode for High-Performance Asymmetric Supercapacitors

  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Chodankar, Nilesh R.|||0000-0002-1174-2064
  • Holze, Rudolf|||0000-0002-3516-1918
  • Kim, Do-Heyoung|||0000-0001-7949-2252
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
A new ruthenium cobalt oxide (RuCoO) with a unique marigold-like nanostructure and excellent performance as an advanced electrode material has been successfully prepared by a simple electrodeposition (potentiodynamic mode) method. The RuCoO marigolds consist of numerous clusters of ultrathin mesoporous nanoflakes, leaving a large interspace between them to provide numerous electrochemically active sites. Strikingly, this unique marigold-like nanostructure provided excellent electrochemical performance in terms of high energy-storage capacitance (1469 F g at 6 A g) with excellent rate proficiency and long-lasting operating cycling stability (ca. 91.3 % capacitance retention after 3000 cycles), confirming that the mesoporous nanoflakes participate in the ultrafast electrochemical reactions. Furthermore, an asymmetric supercapacitor was assembled using RuCoO (positive electrode) and activated carbon (negative electrode) with aqueous KOH electrolyte. The asymmetric design allowed an upgraded potential range of 1.4 V, which further provided a good energy density of 32.6 Wh kg (1.1 mWh cm). More importantly, the cell delivered an energy density of 12.4 Wh kg even at a maximum power density of 3.2 kW kg, which is noticeably superior to carbon-based symmetric systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Direct electrodeposition of imidazole modified poly(pyrrole) copolymers, synthesis, characterization and supercapacitive properties

  • Wolfart, Franciele
  • Hryniewicz, Bruna|||0000-0002-8701-4418
  • Marchesi, Luís F.
  • Orth, Elisa
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Vidotti, Marcio|||0000-0002-9944-5186
In this manuscript we report the direct electrosynthesis of a new conducting copolymer based on the incorporation of imidazole molecules within the polypyrrole chain. Different proportions of the monomers were tested during the direct electropolymerization of the copolymer. The resulting materials were characterized by electrochemical and spectroscopic techniques (Raman and XPS) and a mechanism of polymerization is proposed. Our findings showed that imidazole acts as an inhibitor of the polymerization process, decreasing the overall number of actives sites for the polymerization on the electrode surface producing a polymeric morphology very different compared with pure polypyrrole, as observed by Scanning Electron Microscopy images and corroborated by Electrochemical Impedance Spectroscopy. This behavior significantly affects the supercapacitive performance of the resulting p(Py-IMZ) modified electrodes where the specific capacitance of the material increased from 122 to 201 Fg (64%) at 10 mV s. Furthermore, a unique pseudo-capacitive behavior described herein emphasizes the role of the imidazole as inductor of the morphology and co-monomer in the unique electrochemical signature of the material. The results suggest that the incorporation of IMZ increases the specific capacitance of PPy electrode by around 64%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrathin hierarchical porous carbon nanosheets for high-performance supercapacitors and redox electrolyte energy storage

  • Jayaramulu, Kolleboyina|||0000-0003-4923-5065
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Nagar, Bhawna|||0000-0003-2363-9758
  • Ranc, Vaclav
  • Tomanec, Ondrej
  • Petr, Martin
  • Datta, Kasibhatta Kumara Ramanatha
  • Zboril, Radek|||0000-0002-3147-2196
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Fischer, Roland A.|||0000-0002-7532-5286
The design of advanced high-energy-density supercapacitors requires the design of unique materials that combine hierarchical nanoporous structures with high surface area to facilitate ion transport and excellent electrolyte permeability. Here, shape-controlled 2D nanoporous carbon sheets (NPSs) with graphitic wall structure through the pyrolysis of metal-organic frameworks (MOFs) are developed. As a proof-of-concept application, the obtained NPSs are used as the electrode material for a supercapacitor. The carbon-sheet-based symmetric cell shows an ultrahigh Brunauer-Emmett-Teller (BET)-area-normalized capacitance of 21.4 µF cm (233 F g), exceeding other carbon-based supercapacitors. The addition of potassium iodide as redox-active species in a sulfuric acid (supporting electrolyte) leads to the ground-breaking enhancement in the energy density up to 90 Wh kg, which is higher than commercial aqueous rechargeable batteries, maintaining its superior power density. Thus, the new material provides a double profits strategy such as battery-level energy and capacitor-level power density