Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Vertical separation of the atmospheric aerosol components by sign POLIPHON retrieval in polarized micro pulse lidar (P-MPL) measurements: case studies of specific climate-relevant aerosol types

  • Cordoba, Carmen
  • Sicard, Michaël
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
POLIPHON (POlarization-LIdar PHOtometer Networking) retrieval consists in the vertical separation of two/three particle components in aerosol mixtures, highlighting their relative contributions in terms of the optical properties and mass concentrations. This method is based on the specific particle linear depolarization ratio given for different types of aerosols, and is applied to the new polarized Micro-Pulse Lidar (P-MPL). Case studies of specific climate-relevant aerosols (dust particles, fire smoke, and pollen aerosols, including a clean case as reference) observed over Barcelona (Spain) are presented in order to evaluate firstly the potential of P-MPLs measurements in combination with POLIPHON for retrieving the vertical separation of those particle components forming aerosol mixtures and their properties., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Synergy of Raman lidar and modeled temperature for relative humidity profiling: assessment and uncertainty analysis

  • Muñoz Porcar, Constantino
  • Sicard, Michaël
  • Granados Muñoz, María José
  • Barragán Cuesta, Rubén
  • Comerón Tejero, Adolfo
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • García Vizcaíno, David
Relative humidity (RH) profiling using Raman lidars requires simultaneous range-resolved temperature and pressure data that are not always available. We propose and assess a method based on the use of a locally retrieved atmospheric model to estimate the temperature and pressure profiles. This model relies on the data from daily radiosonde launches at Barcelona during a five-year-long period (2015-2019). We have computed the range-resolved error of the model compared with the radiosonde ``true'' temperature profiles. Then, we have calculated the induced uncertainty in the recalculated RH profiles, finding that the standard deviation at 5 km is <15% for more than 80% of the radiosoundings. We have applied the method to a set of lidar measurements. We have first compared the resulting profiles with lidar retrievals using radiosonde temperatures, and we found differences that are compatible with the previous statistical analysis. We also compared them with in situ radiosonde humidity measurements, finding, in this case, bigger differences due to additional sources of error. Uncertainty analysis shows that the temperature model is the most significant error source below 4-5 km. For higher altitudes, the noise of the Raman signals may become the main contribution. We show that the resulting uncertainty (commonly <15% below 5 km) is compatible with the statistical analysis of the model and comparable with the ones obtained using other instruments for temperature profiling. We show that this method permits nocturnal lidar-based RH profiling with uncertainty estimation without the need for measured atmospheric profiles., This work was supported by the European Union H2020 program (grant agreement no. 654109, 778349), the Spanish Ministry of Economy and Competitivity (ref. TEC2015- 63832-P), the Spanish Ministry of Science and Innovation (ref. PID2019- 103886RB-I00, CGL2017-90884-REDT), the Department of Economy and Knowledge of the Catalan autonomous government (grant 2014 SGR583), the Unity of Excellence Maria de Maeztu (ref. MDM-2016-0600), which is financed by the Agencia Estatal de Investigación (AEI) and the Juan de la Cierva-Formación Program (grant FJCI-2015-23904)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

First forecasts of airborne platanus and pinus pollen in Catalonia, NE Spain: use of a ground-based LiDar to estimate the model score

  • Sicard, Michaël
  • Jorba Casellas, Oriol
  • Izquierdo Miguel, Rebeca
  • Alarcón Jordán, Marta
  • Belmonte Soler, Jordina
  • Comerón Tejero, Adolfo
  • De Linares, Concepción
  • Baldasano Recio, José María
Pollen allergenicity plays an important role on human health and wellness. It is thus of large public interest to increase our knowledge of pollen grain behavior in the atmosphere (source, emission, processes involved during their transport, etc.) at fine temporal and spatial scales. First simulations with the Barcelona Supercomputing Center NMMB-MONARCHv1.0 model of Platanus and Pinus dispersion in the atmosphere were performed during a 5-day pollination event observed in Barcelona, Spain, between 27 - 31 March, 2015. The simulations are compared to vertical profiles measured with the continuous Barcelona Micro Pulse Lidar system. Improvements in the model are made by tuning the wind effect scale factor and the sedimentation speed. First results show that the vertical distribution is well reproduced by the model in shape, but not in intensity, the model largely underestimating in the afternoon. Guidelines are proposed to improve the dispersion of airborne pollen by numerical prediction models., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A 1-D radiative transfer study of mineral dust during CHARMEX/ADRIMED 2013 campaign

  • Granados Muñoz, María José
  • Sicard, Michaël
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Alados-Arboledas, L
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Comerón Tejero, Adolfo
A 1-D radiative transfer study is presented based on the measurements performed at Granada during a dust event within the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment/Aerosol Direct Radiative Forcing on the Mediterranean Climate) campaign, during June 16-17, 2013. Ground-based AERONET and lidar measurements were performed and further processed with the GRASP algorithm to get spectrally-resolved profiles of extinction and single scattering albedo. Furthermore, the research aircraft ATR-42 made two flights above Granada providing vertical profiles of aerosol optical and microphysical properties together with measurements of broadband radiative fluxes. All of the ground-based and aircraft aerosol properties are used as input in the radiative transfer model GAME in order to evaluate its sensitivity to different input datasets. The aircraft fluxes are used for validation of the modelled ones., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Concept design of a multiwavelength aerosol lidar system with mitigated diattenuation effects and depolarization-measurement capability

  • Comerón Tejero, Adolfo
  • Sicard, Michaël
  • Vidal Calvo, Eric
  • Barragán Cuesta, Rubén
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
  • García Vizcaíno, David
It is known that the retrieval of aerosol extinction and backscatter coefficients from lidar data acquired through so-called total-power channels – intended to measure the backscattered power irrespective of the polarization – can be adversely affected by varying depolarization effects produced by the aerosol under measurement. This effect can be particularly noticeable in advanced multiwavelength systems, where different wavelengths are separated using a system of dichroic beam splitters, because in general the reflection and transmission coefficients of the beam splitters will be different for fields with polarization parallel or perpendicular to the incidence plane. Here we propose a setup for multiwavelength aerosol lidars alleviating diattenuation effects due to changing depolarization conditions while allowing measure linear depolarization., This work has been supported by the following projects and grants: European Union 7th Framework Programme grant agreement No. 262254 (ACTRIS), Spanish Ministry for Economy and Competitiveness grants TEC2012-34575 and UNPC10-4E-442, and by the Catalan Agency for Support to Universities and Research (AGAUR) grant 2014 SGR 583., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

EARLINET: potential operationality of a research network

  • Sicard, Michaël
  • D'Amico, Giuseppe
  • Comerón Tejero, Adolfo
  • Mona, Lucia
  • Alados Arboledas, Lucas
  • Amodeo, Aldo
  • Baars, Holger
  • Baldasano Recio, José María
  • Belegante, Livio
  • Binietoglou, Ioannis
  • Bravo Aranda, Juan Antonio
  • Fernández García, Alfonso
  • Fréville, Patrick
  • García Vizcaíno, David
  • Giunta, Aldo
  • Granados Muñoz, Maria
  • Guerrero Rascado, Juan Luis
  • Hadjimitsis, D.
  • Haefele, A.
  • Hervo, M.
  • Iarlori, M.
  • Kokkalis, P
  • Lange Vega, Diego
  • Mamouri, Rodanthi-Elisavet
  • Mattis, Ina
  • Molero, Francisco
  • Montoux, Nadège
  • Muñoz, Alvaro
  • Muñoz Porcar, Constantino
  • Navas Guzmán, Francisco
  • Nicolae, D.
  • Nisantzi, A.
  • Papagiannopoulos, N.
  • Papayannis, Alexander
  • Pereira, Sérgio
  • Preissler, Jana
  • Pujadas Cordero, Manuel
  • Rizi, Vicenzo
  • Rocadenbosch Burillo, Francisco
  • Sellegri, Karine
  • Simeonov, Valentin
  • Tsaknakis, G.
  • Wagner, Frank
  • Pappalardo, Gelsomina
In the framework of ACTRIS (Aerosols, Clouds, and Trace Gases Research Infrastructure Network) summer 2012 measurement campaign (8 June–17 July 2012), EARLINET organized and performed a controlled exercise of feasibility to demonstrate its potential to perform operational, coordinated measurements and deliver products in near-real time. Eleven lidar stations participated in the exercise which started on 9 July 2012 at 06:00 UT and ended 72 h later on 12 July at 06:00 UT. For the first time, the single calculus chain (SCC) – the common calculus chain developed within EARLINET for the automatic evaluation of lidar data from raw signals up to the final products – was used. All stations sent in real-time measurements of a 1 h duration to the SCC server in a predefined netcdf file format. The pre-processing of the data was performed in real time by the SCC, while the optical processing was performed in near-real time after the exercise ended. 98 and 79% of the files sent to SCC were successfully pre-processed and processed, respectively. Those percentages are quite large taking into account that no cloud screening was performed on the lidar data. The paper draws present and future SCC users’ attention to the most critical parameters of the SCC product configuration and their possible optimal value but also to the limitations inherent to the raw data. The continuous use of SCC direct and derived products in heterogeneous conditions is used to demonstrate two potential applications of EARLINET infrastructure: the monitoring of a Saharan dust intrusion event and the evaluation of two dust transport models. The efforts made to define the measurements protocol and to configure properly the SCC pave the way for applying this protocol for specific applications such as the monitoring of special events, atmospheric modeling, climate research and calibration/ validation activities of spaceborne observations., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Impact of mineral dust on shortwave and longwave radiation: evaluation of different vertically resolved parameterizations in 1-D radiative transfer computations

  • Granados Muñoz, María José
  • Sicard, Michaël
  • Román Díez, Roberto
  • Benavent Oltra, Pablo
  • Barragán Cuesta, Rubén
  • Brogniez, G.
  • Denjean, Cyrielle
  • Mallet, Marc
  • Formenti, P
  • Torres, Banjamin
  • Alados Arboledas, Lucas
Aerosol radiative properties are investigated in southeastern Spain during a dust event on June 16-17, 2013 in the framework of the ChArMEx/ADRIMED (Chemistry-Aerosol Mediterranean Experiment /Aerosol Direct Radiative Impact on the regional climate in the MEDiterranean region) campaign. Particle optical and microphysical properties from ground-based sun/sky photometer and lidar measurements, as well as in situ measurements onboard the SAFIRE ATR 42 French research aircraft are used to create a set of different levels of input parameterizations, which feed the 1-D radiative transfer model (RTM) GAME (Global Atmospheric ModEl). We consider three datasets: 1) a first parameterization based on the retrievals by an advanced aerosol inversion code (GRASP; Generalized Retrieval of Aerosol and Surface Properties) applied to combined photometer and lidar data; 2) a parameterization based on the photometer columnar optical properties and vertically-resolved lidar retrievals with the two-component Klett-Fernald algorithm; and 3) a parameterization based on vertically-resolved optical and microphysical aerosol properties measured in situ by the aircraft instrumentation. Once retrieved, the outputs of the RTM in terms of both shortwave and longwave radiative fluxes are compared against ground and in situ airborne measurements. In addition, the outputs of the model in terms of the aerosol direct radiative effect are discussed with respect to the different input parameterizations. Results show that calculated atmospheric radiative fluxes differ no more than 7 % to the measured ones. The three parameterization datasets produce a cooling effect due to mineral dust both at the surface and the top of the atmosphere. Aerosol radiative effects with differences up to 10 W·m-2 in the shortwave spectral range (mostly due to differences in the aerosol optical depth), and 2 W·m-2 for the longwave (mainly due to differences in the aerosol optical depth but also to the coarse mode radius used to calculate the radiative properties) are obtained when comparing the three parameterizations. The study reveals the complexity of parametrizing 1-D RTMs as sizing and characterising the optical properties of mineral dust is challenging. The use of advanced remote sensing data and processing, in combination with closure studies on the optical/microphysical properties from in situ aircraft measurements when available, is recommended., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Compact lidar system using laser diode, binary continuous wave power modulation, and an avalanche photodiode-based receiver controlled by a digital signal processor

  • Ardanuy Dellà, Antoni
  • Comerón Tejero, Adolfo
We analyze the practical limits of a lidar system based on the use of a laser diode, random binary continuous wave power modulation, and an avalanche photodiode (APD)-based photereceiver, combined with the control and computing power of the digital signal processors (DSP) currently available. The target is to design a compact portable lidar system made all in semiconductor technology, with a low-power demand and an easy configuration of the system, allowing change in some of its features through software. Unlike many prior works, we emphasize the use of APDs instead of photomultiplier tubes to detect the return signal and the application of the system to measure not only hard targets, but also medium-range aerosols and clouds. We have developed an experimental prototype to evaluate the behavior of the system under different environmental conditions. Experimental results provided by the prototype are presented and discussed., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

The climatology of dust events over the European continent using data of the BSC-DREAM8b model

  • Mandija, Florian
  • Chavez Perez, V.M.
  • Nieto, R.
  • Sicard, Michaël
  • Danylevsky, V.
  • Añel, J.A.
  • Gimeno, L.
© <2018>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Highlights The climatology of desert dust events over the whole European region is presented. This study is based on the data of BSC-DREAM8b model and other validation tools. AERONET and satellite data are used for validation of the model outputs. The most affected areas are the central sectors, mainly in spring and summertime. Main dust contributors, over the European region are the western and central Sahara., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Separation of the optical and mass features of particle components in different aerosol mixtures by using POLIPHON retrievals in synergy with continuous polarized Micro-Pulse Lidar (P-MPL) measurements

  • Cordoba Jabonero, Carmen
  • Sicard, Michaël
  • Ansmann, Albert
  • del Aguila, Ana
  • Baars, Holger
The application of the POLIPHON (POlarization-LIdar PHOtometer Networking) method is presented for the first time in synergy with continuous 24/7 polarized Micro-Pulse Lidar (P-MPL) measurements to derive the vertical separation of two or three particle components in different aerosol mixtures, and the retrieval of their particular optical properties. The procedure of extinction-to-mass conversion, together with an analysis of the mass extinction efficiency (MEE) parameter, is described, and the relative mass contribution of each aerosol component is also derived in a further step. The general POLIPHON algorithm is based on the specific particle linear depolarization ratio given for different types of aerosols and can be run in either 1-step (POL-1) or 2 steps (POL-2) versions with dependence on either the 2- or 3-component separation. In order to illustrate this procedure, aerosol mixing cases observed over Barcelona (NE Spain) are selected: a dust event on 5 July 2016, smoke plumes detected on 23 May 2016 and a pollination episode observed on 23 March 2016. In particular, the 3-component separation is just applied for the dust case: a combined POL-1 with POL-2 procedure (POL-1/2) is used, and additionally the fine-dust contribution to the total fine mode (fine dust plus non-dust aerosols) is estimated. The high dust impact before 12:00UTC yields a mean mass loading of 0.6±0.1gm-2 due to the prevalence of Saharan coarse-dust particles. After that time, the mean mass loading is reduced by two-thirds, showing a rather weak dust incidence. In the smoke case, the arrival of fine biomass-burning particles is detected at altitudes as high as 7km. The smoke particles, probably mixed with less depolarizing non-smoke aerosols, are observed in air masses, having their origin from either North American fires or the Arctic area, as reported by HYSPLIT back-trajectory analysis. The particle linear depolarization ratio for smoke shows values in the 0.10–0.15 range and even higher at given times, and the daily mean smoke mass loading is 0.017±0.008gm-2, around 3% of that found for the dust event. Pollen particles are detected up to 1.5km in height from 10:00UTC during an intense pollination event with a particle linear depolarization ratio ranging between 0.10 and 0.15. The maximal mass loading of Platanus pollen particles is 0.011±0.003gm-2, representing around 2% of the dust loading during the higher dust incidence. Regarding the MEE derived for each aerosol component, their values are in agreement with others referenced in the literature for the specific aerosol types examined in this work: 0.5±0.1 and 1.7±0.2m2g-1 are found for coarse and fine dust particles, 4.5±1.4m2g-1 is derived for smoke and 2.4±0.5m2g-1 for non-smoke aerosols with Arctic origin, and a MEE of 2.4±0.8m2g-1 is obtained for pollen particles, though it can reach higher or lower values depending on predominantly smaller or larger pollen grain sizes. Results reveal the high potential of the P-MPL system, a simple polarization-sensitive elastic backscatter lidar working in a 24/7 operation mode, to retrieve the relative optical and mass contributions of each aerosol component throughout the day, reflecting the daily variability of their properties. In fact, this procedure can be simply implemented in other P-MPLs that also operate within the worldwide Micro-Pulse Lidar Network (MPLNET), thus extending the aerosol discrimination at a global scale. Moreover, the method has the advantage of also being relatively easily applicable to space-borne lidars with an equivalent configuration such as the ongoing Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) on board NASA CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) and the forthcoming Atmospheric Lidar (ATLID) on board the ESA EarthCARE mission., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Considerations about the determination of the depolarization calibration profile of a two-telescope lidar and its implications for volume depolarization ratio retrieval

  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Sicard, Michaël
  • Barragán Cuesta, Rubén
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Granados Muñoz, María José
We propose a new method for calculating the volume depolarization ratio of light backscattered by the atmosphere and a lidar system that employs an auxiliary telescope to detect the depolarized component. It takes into account the possible error in the positioning of the polarizer used in the auxiliary telescope. The theory of operation is presented and then applied to a few cases for which the actual position of the polarizer is estimated, and the improvement of the volume depolarization ratio in the molecular region is quantified. In comparison to the method used before, i.e., without correction, the agreement between the volume depolarization ratio with correction and the theoretical value in the molecular region is improved by a factor of 2–2.5., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Current research in lidar technology used for the remote sensing of atmospheric aerosols

  • Comerón Tejero, Adolfo
  • Muñoz Porcar, Constantino
  • Rocadenbosch Burillo, Francisco
  • Rodríguez Gómez, Alejandro Antonio
  • Sicard, Michaël
Lidars are active optical remote sensing instruments with unique capabilities for atmospheric sounding. A manifold of atmospheric variables can be profiled using different types of lidar: concentration of species, wind speed, temperature, etc. Among them, measurement of the properties of aerosol particles, whose influence in many atmospheric processes is important but is still poorly stated, stands as one of the main fields of application of current lidar systems. This paper presents a review on fundamentals, technology, methodologies and state-of-the art of the lidar systems used to obtain aerosol information. Retrieval of structural (aerosol layers profiling), optical (backscatter and extinction coefficients) and microphysical (size, shape and type) properties requires however different levels of instrumental complexity; this general outlook is structured following a classification that attends these criteria. Thus, elastic systems (detection only of emitted frequencies), Raman systems (detection also of Raman frequency-shifted spectral lines), high spectral resolution lidars, systems with depolarization measurement capabilities and multi-wavelength instruments are described, and the fundamentals in which the retrieval of aerosol parameters is based is in each case detailed., Peer Reviewed, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Near-surface and columnar measurements with a micro pulse lidar of atmospheric pollen in Barcelona, Spain

  • Sicard, Michaël
  • Izquierdo Miguel, Rebeca|||0000-0001-5780-4462
  • Alarcón Jordán, Marta
  • Belmonte, Jordina|||0000-0002-6419-9595
  • Comerón, Adolfo
  • Baldasano, José Maria
We present for the first time continuous hourly measurements of pollen near-surface concentration and lidarderived profiles of particle backscatter coefficients and of volume and particle depolarization ratios during a 5-day pollination event observed in Barcelona, Spain, between 27 and 31 March 2015. Daily average concentrations ranged from 1082 to 2830 pollenm¯³. Platanus and Pinus pollen types represented together more than 80%of the total pollen. Maximum hourly pollen concentrations of 4700 and 1200m¯³ were found for Platanus and Pinus, respectively. Every day a clear diurnal cycle caused by the vertical transport of the airborne pollen was visible on the lidar-derived profiles with maxima usually reached between 12:00 and 15:00 UT. A method based on the lidar polarization capabilities was used to retrieve the contribution of the pollen to the total aerosol optical depth (AOD). On average the diurnal (09:00-17:00 UT) pollen AOD was 0.05, which represented 29% of the total AOD. Maximum values of the pollen AOD and its contribution to the total AOD reached 0.12 and 78 %, respectively. The diurnal means of the volume and particle depolarization ratios in the pollen plume were 0.08 and 0.14, with hourly maxima of 0.18 and 0.33, respectively. The diurnal mean of the height of the pollen plume was found at 1.24 km with maxima varying in the range of 1.47-1.78 km. A correlation study is performed (1) between the depolarization ratios and the pollen near-surface concentration to evaluate the ability of the former parameter to monitor pollen release and (2) between the depolarization ratios as well as pollen AOD and surface downward solar fluxes, which cause the atmospheric turbulences responsible for the particle vertical motion, to examine the dependency of the depolarization ratios and the pollen AOD upon solar fluxes. For the volume depolarization ratio the first correlation study yields to correlation coefficients ranging 0.00-0.81 and the second to correlation coefficients ranging 0.49-0.86.