Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Radiometric correction of Landsat-8 and Sentinel-2A scenes using drone imagery in synergy with field spectroradiometry

  • Padró Garcia, Joan-Cristian|||0000-0003-2034-7856
  • Muñoz, Francisco-Javier
  • Ávila Pozo, Luis Ángel|||0000-0002-6027-4340
  • Pesquer Mayos, Lluís|||0000-0002-7396-2468
  • Pons, Xavier|||0000-0002-6924-1641
The main objective of this research is to apply unmanned aerial system (UAS) data in synergy with field spectroradiometry for the accurate radiometric correction of Landsat-8 (L8) and Sentinel-2 (S2) imagery. The central hypothesis is that imagery acquired with multispectral UAS sensors that are well calibrated with highly accurate field measurements can fill in the scale gap between satellite imagery and conventional in situ measurements; this can be possible by sampling a larger area, including difficult-to-access land covers, in less time while simultaneously providing good radiometric quality. With this aim and by using near-coincident L8 and S2 imagery, we applied an upscaling workflow, whereby: (a) UAS-acquired multispectral data was empirically fitted to the reflectance of field measurements, with an extensive set of radiometric references distributed across the spectral domain; (b) drone data was resampled to satellite grids for comparison with the radiometrically corrected L8 and S2 official products (6S-LaSRC and Sen2Cor-SNAP, respectively) and the CorRad-MiraMon algorithm using pseudo-invariant areas, such as reflectance references (PIA-MiraMon), to examine their overall accuracy; (c) then, a subset of UAS data was used as reflectance references, in combination with the CorRad-MiraMon algorithm (UAS-MiraMon), to radiometrically correct the matching bands of UAS, L8, and S2; and (d) radiometrically corrected L8 and S2 scenes obtained with UAS-MiraMon were intercompared (intersensor coherence). In the first upscaling step, the results showed a good correlation between the field spectroradiometric measurements and the drone data in all evaluated bands (R > 0.946). In the second upscaling step, drone data indicated good agreement (estimated from root mean square error, RMSE) with the satellite official products in visible (VIS) bands (RMSEVIS < 2.484%), but yielded poor results in the near-infrared (NIR) band (RMSE > 6.688% was not very good due to spectral sensor response differences). In the third step, UAS-MiraMon indicated better agreement (RMSEVIS < 2.018%) than the other satellite radiometric correction methods in visible bands (6S-LaSRC (RMSE < 2.680%), Sen2Cor-SNAP (RMSE < 2.192%), and PIA-MiraMon (RMSE < 3.130%), but did not achieve sufficient results in the NIR band (RMSE < 7.530%); this also occurred with all other methods. In the intercomparison step, the UAS-MiraMon method achieved an excellent intersensor (L8-S2) coherence (RMSEVIS < 1%). The UAS-sampled area involved 51 L8 (30 m) pixels, 143 S2 (20 m) pixels, and 517 S2 (10 m) pixels. The drone time needed to cover this area was only 10 min, including areas that were difficult to access. The systematic sampling of the study area was achieved with a pixel size of 6 cm, and the raster nature of the sampling allowed for an easy but rigorous resampling of UAS data to the different satellite grids. These advances improve human capacities for conventional field spectroradiometry samplings. However, our study also shows that field spectroradiometry is the backbone that supports the full upscaling workflow. In conclusion, the synergy between field spectroradiometry, UAS sensors, and Landsat-like satellite data can be a useful tool for accurate radiometric corrections used in local environmental studies or the monitoring of protected areas around the world.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spatial and spectral pattern identification for the automatic selection of high-quality MODIS images

  • Pesquer Mayos, Lluís|||0000-0002-7396-2468
  • Domingo-Marimon, Cristina|||0000-0001-6822-8704
  • Pons, Xavier|||0000-0002-6924-1641
Remote sensing is providing an increasing number of crucial data about Earth. Systematic revisitation time allows the analysis of long time series as well as imagery utilization in the most interesting moments. Nevertheless, the current huge amount of data makes essential the usage of automatic methods to select the best captures, as many of them are not useful because of clouds, shadows, etc. Because of that, one of the characteristics of the more recent missions is the distribution, along with the spectral data, of a large amount of quality ancillary datasets. These datasets can act synergistically in the aim of selecting the best quality images, but the criteria they provide are not always enough. Indeed, these datasets are often used on a per pixel basis and the spatial pattern of the different spectral bands is forgotten, so ignoring the key information they can provide for our goals. With this aim, our work takes one of the most successful instruments in remote sensing, MODIS, and demonstrates, through geostatistical techniques, that the role of the spatial patterns of the spectral bands can effectively improve image selection in a complex (for climate, relief, and vegetation and crop phenology) region of 63,700  km2. The results show that band 01 (red) is the preferred one, as it achieves a 13% higher success than when only using quality bands criteria: a 94% global accuracy (66 true classifications, and only four omissions and one commission error). A second, important finding, is that the geostatistical selection improves results when using any band, except for band 02 (NIR1), which makes our proposal potentially useful for most remote sensing missions. Finally, the method can be executed in a reasonable computing time due to previously developed high-performance computing techniques.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Monitoring opencast mine restorations using Unmanned Aerial System (UAS) imagery

  • Padró Garcia, Joan-Cristian|||0000-0003-2034-7856
  • Carabassa, Vicenç|||0000-0002-8728-2818
  • Brotons, Lluís|||0000-0002-4826-4457
  • Alcañiz, Josep M|||0000-0002-6438-0909
  • Pons, Xavier|||0000-0002-6924-1641
Open-pit mine is still an unavoidable activity but can become unsustainable without the restoration of degraded sites. Monitoring the restoration after extractive activities is a legal requirement for mine companies and public administrations in many countries, involving financial provisions for environmental liabilities. The objective of this contribution is to present a rigorous, low-cost and easy-to-use application of Unmanned Aerial Systems (UAS) for supporting opencast mining and restoration monitoring, complementing the inspections with very high (<10 cm) spatial resolution multispectral imagery, and improving any restoration documentation with detailed land cover maps. The potential of UAS as a tool to control restoration works is presented in a calcareous quarry that has undergone different post-mining restoration actions in the last 20 years, representing 4 reclaimed stages. We used a small (<2 kg) drone equipped with a multispectral sensor, along with field spectroradiometer measurements that were used to radiometrically correct the UAS sensor data. Imagery was processed with photogrammetric and Remote Sensing and Geographical Information Systems software, resulting in spectral information, vegetation and soil indices, structural information and land cover maps. Spectral data and land cover classification, which were validated through ground-truth plots, aided in the detection and quantification of mine waste dumping, bare soil and other land cover extension. Moreover, plant formations and vegetation development were evaluated, allowing a quantitative, but at the same time visual and intuitive comparison with the surrounding reference systems. The protocol resulting from this research constitutes a pipeline solution intended for the implementation by public administrations and privates companies for precisely evaluating restoration dynamics in an expedient manner at a very affordable budget. Furthermore, the proposed solution prevents subjective interpretations by providing objective data, which integrate new technologies at the service of scientists, environmental managers and decision makers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Regime shifts of Mediterranean forest carbon uptake and reduced resilience driven by multidecadal ocean surface temperatures

  • Carnicer Cols, Jofre|||0000-0001-7454-8296
  • Domingo-Marimon, Cristina|||0000-0001-6822-8704
  • Ninyerola i Casals, Miquel|||0000-0002-1101-0453
  • Camarero, Jesús Julio|||0000-0003-2436-2922
  • Bastos, Ana|||0000-0002-7368-7806
  • López Parages, Jorge
  • Blanquer, Andreu|||0000-0002-3551-1885
  • Rodríguez Fonseca, Belén
  • Lenton, Timothy M.
  • Dakos, Vasilis
  • Ribas Matamoros, Montserrat
  • Gutiérrez, Emília|||0000-0002-6085-5700
  • Peñuelas, Josep|||0000-0002-7215-0150
  • Pons, Xavier|||0000-0002-6924-1641
The mechanisms translating global circulation changes into rapid abrupt shifts in forest carbon capture in semi-arid biomes remain poorly understood. Here, we report unprecedented multidecadal shifts in forest carbon uptake in semi-arid Mediterranean pine forests in Spain over 1950-2012. The averaged carbon sink reduction varies between 31% and 37%, and reaches values in the range of 50% in the most affected forest stands. Regime shifts in forest carbon uptake are associated with climatic early warning signals, decreased forest regional synchrony and reduced long-term carbon sink resilience. We identify the mechanisms linked to ocean multidecadal variability that shape regime shifts in carbon capture. First, we show that low-frequency variations of the surface temperature of the Atlantic Ocean induce shifts in the non-stationary effects of El Niño Southern Oscillation (ENSO) on regional forest carbon capture. Modelling evidence supports that the non-stationary effects of ENSO can be propagated from tropical areas to semi-arid Mediterranean biomes through atmospheric wave trains. Second, decadal changes in the Atlantic Multidecadal Oscillation (AMO) significantly alter sea-air heat exchanges, modifying in turn ocean vapour transport over land and land surface temperatures, and promoting sustained drought conditions in spring and summer that reduce forest carbon uptake. Third, we show that lagged effects of AMO on the winter North Atlantic Oscillation also contribute to the maintenance of long-term droughts. Finally, we show that the reported strong, negative effects of ocean surface temperature (AMO) on forest carbon uptake in the last decades are unprecedented over the last 150 years. Our results provide new, unreported explanations for carbon uptake shifts in these drought-prone forests and review the expected impacts of global warming on the profiled mechanisms.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Comparison of four UAV georeferencing methods for environmental monitoring purposes focusing on the combined use with airborne and satellite remote sensing platforms

  • Padró Garcia, Joan-Cristian|||0000-0003-2034-7856
  • Muñoz, Francisco-Javier
  • Planas, Jordi
  • Pons, Xavier|||0000-0002-6924-1641
This work is aimed at the environmental remote sensing community that uses UAV optical frame imagery in combination with airborne and satellite data. Taking into account the economic costs involved and the time investment, we evaluated the fit-for-purpose accuracy of four positioning methods of UAV-acquired imagery: 1) direct georeferencing using the onboard raw GNSS (GNSSNAV) data, 2) direct georeferencing using Post-Processed Kinematic single-frequency carrier-phase without in situ ground support (PPK1), 3) direct georeferencing using Post-Processed Kinematic double-frequency carrier-phase GNSS data with in situ ground support (PPK2), and 4) indirect georeferencing using Ground Control Points (GCP). We tested a multispectral sensor and an RGB sensor, onboard multicopter platforms. Orthophotomosaics at <0.05 m spatial resolution were generated with photogrammetric software. The UAV image absolute accuracy was evaluated according to the ASPRS standards, wherein we used a set of GCPs as reference coordinates, which we surveyed with a differential GNSS static receiver. The raw onboard GNSSNAV solution yielded horizontal (radial) accuracies of RMSEr≤1.062 m and vertical accuracies of RMSEz≤4.209 m; PPK1 solution gave decimetric accuracies of RMSEr≤0.256 m and RMSEz≤0.238 m; PPK2 solution, gave centimetric accuracies of RMSEr≤0.036 m and RMSEz≤0.036 m. These results were further improved by using the GCP solution, which yielded accuracies of RMSEr≤0.023 m and RMSEz≤0.030 m. GNSSNAV solution is a fast and low-cost option that is useful for UAV imagery in combination with remote sensing products, such as Sentinel-2 satellite data. PPK1, which can register UAV imagery with remote sensing products up to 0.25 m pixel size, as WorldView-like satellite imagery, airborne lidar or orthoimagery, has a higher economic cost than the GNSSNAV solution. PPK2 is an acceptable option for registering remote sensing products of up to 0.05 m pixel size, as with other UAV images. Moreover, PPK2 can obtain accuracies that are approximate to the usual UAV pixel size (e.g. co-register in multitemporal studies), but it is more expensive than PPK1. Although indirect georeferencing can obtain the highest accuracy, it is nevertheless a time-consuming task, particularly if many GCPs have to be placed. The paper also provides the approximate cost of each solution.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A provenance metadata model integrating ISO geospatial lineage and the OGC WPS, conceptual model and implementation

  • Closa, Guillem|||0000-0002-1333-171X
  • Masó, Joan|||0000-0002-2983-4629
  • Zabala Torres, Alaitz|||0000-0002-3931-4221
  • Pesquer Mayos, Lluís|||0000-0002-7396-2468
  • Pons, Xavier|||0000-0002-6924-1641
Nowadays, there are still some gaps in the description of provenance metadata. These gaps prevent the capture of comprehensive provenance, useful for reuse and reproducibility. In addition, the lack of automated tools for capturing provenance hinders the broad generation and compilation of provenance information. This work presents a provenance engine (PE) that captures and represents provenance information using a combination of the Web Processing Service (WPS) standard and the ISO 19115 geospatial lineage model. The PE, developed within the MiraMon GIS & RS software, automatically records detailed information about sources and processes. The PE also includes a metadata editor that shows a graphical representation of the provenance and allows users to complement provenance information by adding missing processes or deleting redundant process steps or sources, thus building a consistent geospatial workflow. One use case is presented to demonstrate the usefulness and effectiveness of the PE: the generation of a radiometric pseudo-invariant areas bench for the Iberian Peninsula. This remote-sensing use case shows how provenance can be automatically captured, also in a non-sequential complex flow, and its essential role in the automation and replication tasks in work with very large amounts of geospatial data.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Geospatial user feedback, how to raise users' voices and collectively build knowledge at the same time

  • Zabala Torres, Alaitz|||0000-0002-3931-4221
  • Masó, Joan|||0000-0002-2983-4629
  • Bastin, Lucy|||0000-0003-1321-0800
  • Giuliani, Gregory
  • Pons, Xavier|||0000-0002-6924-1641
Geospatial data is used not only to contemplate reality but also, in combination with analytical tools, to generate new information that requires interpretation. In this process data users gain knowledge about the data and its limitations (the user side of data quality) as well as knowledge on the status and evolutions of the studied phenomena. Knowledge can be annotations on top of the data, responses to questions, a careful description of the processes applied, a piece of software code or scripts applied to the data, usage reports or a complete scientific paper. This paper proposes an extension of the current Open Geospatial Consortium standard for Geospatial User Feedback to include the required knowledge elements, and a practical implementation. The system can incrementally collect, store, and communicate knowledge elements created by users of the data and keep them linked to the original data by means of permanent data identifiers. The system implements a Web API to manage feedback items as a frontend to a database. The paper demonstrates how a JavaScript widget accessing this API as a client can be easily integrated into existing data catalogues, such as the ECOPotential web service or the GEOEssential data catalogue, to collectively collect and share knowledge.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Geospatial queries on data collection using a common provenance model

  • Closa, Guillem|||0000-0002-1333-171X
  • Julià, Núria|||0000-0002-4259-0665
  • Pons, Xavier|||0000-0002-6924-1641
  • Masó, Joan|||0000-0002-2983-4629
Lineage information is the part of the metadata that describes "what", "when", "who", "how", and "where" geospatial data were generated. If it is well-presented and queryable, lineage becomes very useful information for inferring data quality, tracing error sources and increasing trust in geospatial information. In addition, if the lineage of a collection of datasets can be related and presented together, datasets, process chains, and methodologies can be compared. This paper proposes extending process step lineage descriptions into four explicit levels of abstraction (process run, tool, algorithm and functionality). Including functionalities and algorithm descriptions as a part of lineage provides high-level information that is independent from the details of the software used. Therefore, it is possible to transform lineage metadata that is initially documenting specific processing steps into a reusable workflow that describes a set of operations as a processing chain. This paper presents a system that provides lineage information as a service in a distributed environment. The system is complemented by an integrated provenance web application that is capable of visualizing and querying a provenance graph that is composed by the lineage of a collection of datasets. The International Organization for Standardization (ISO) 19115 standards family with World Wide Web Consortium (W3C) provenance initiative (W3C PROV) were combined in order to integrate provenance of a collection of datasets. To represent lineage elements, the ISO 19115-2 lineage class names were chosen, because they express the names of the geospatial objects that are involved more precisely. The relationship naming conventions of W3C PROV are used to represent relationships among these elements. The elements and relationships are presented in a queryable graph.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Protected areas from space map browser with fast visualization and analytical operations on the fly. Characterizing statistical uncertainties and balancing them with visual perception

  • Masó, Joan|||0000-0002-2983-4629
  • Zabala Torres, Alaitz|||0000-0002-3931-4221
  • Pons, Xavier|||0000-0002-6924-1641
Despite huge progress in applying Earth Observation (EO) satellite data to protected areas, managers still lack the right tools or skills to analyze the data and extract the necessary knowledge. In this paper a set of EO products are organized in a visualization and analysis map browser that lowers usage barriers and provides functionalities comparable to raster-based GIS. Normally, web map servers provide maps as pictorial representations at screen resolution. The proposal is to use binary arrays with actual values, empowering the JavaScript web client to operate with the data in many ways. Thanks to this approach, the user can analyze big data by performing queries and spatial filters, changing image contrast or color palettes or creating histograms, time series profiles and complex calculations. Since the analysis is made at screen resolution, it minimizes bandwidth while maintaining visual quality. The paper explores the limitations of the approach and quantifies the statistical validity of some resampling methods that provide different visual perceptions. The results demonstrate that the methods known for having good visual perception, the mode for categorical values and the median for continuous values, have admissible statistical uncertainties.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The role of recent (1985-2014) patterns of land abandonment and environmental factors in the establishment and growth of secondary forests in the Iberian Peninsula

  • Palmero Iniesta, Marina|||0000-0002-4183-6483
  • Espelta Morral, Josep Maria|||0000-0002-0242-4988
  • Padial-Iglesias, Mario|||0000-0002-8173-5353
  • González Guerrero, Óscar|||0000-0001-8685-5971
  • Pesquer Mayos, Lluís|||0000-0002-7396-2468
  • Domingo-Marimon, Cristina|||0000-0001-6822-8704
  • Ninyerola i Casals, Miquel|||0000-0002-1101-0453
  • Pons, Xavier|||0000-0002-6924-1641
  • Pino i Vilalta, Joan|||0000-0003-0939-7502
Farmland abandonment has been a widespread land-use change in the Iberian Peninsula since the second half of the 20th century, leading to the establishment of secondary forests across the region. In this study, we aimed to address changes in the recent (1985-2014) emergence patterns of these forests and examine how environmental factors affected their growth by considering differences in leaf-habit types. We used a combination of Landsat-derived land-cover maps and above-ground biomass (AGB) maps from the European Space Agency to assess the secondary forest establishment and growth, respectively, in the study region. We also obtained a set of topographic, climatic and landscape variables from diverse GIS layers and used them for determining changes over time in the environmental drivers of forest establishment and AGB using general linear models. The results highlight that secondary forest cover was still increasing in the Iberian Peninsula at a rate above the European average. Yet, they also indicate a directional change in the emergence of secondary forests towards lower and less steep regions with higher water availability (mean rainfall and SPEI) and less forest cover but are subjected to greater drought events. In addition, these environmental factors differentially affect the growth of forests with different leaf-habit types: i.e., needleleaf secondary forests being less favoured by high temperature and precipitation, and broad-leaf deciduous forests being most negatively affected by drought. Finally, these spatial patterns of forest emergence and the contrasting responses of forest leaf-habits to environmental factors explained the major development of broadleaf evergreen compared to broadleaf deciduous forests and, especially, needleleaf secondary forests. These results will improve the knowledge of forest dynamics that have occurred in the Iberian Peninsula in recent decades and provide an essential tool for understanding the potential effects of climate warming on secondary forest growth.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An operational radiometric correction technique for shadow reduction in multispectral uav imagery

  • Pons, Xavier|||0000-0002-6924-1641
  • Padró Garcia, Joan-Cristian|||0000-0003-2034-7856
This study focuses on the recovery of information from shadowed pixels in RGB or multispectral imagery sensed from unmanned aerial vehicles (UAVs). The proposed technique is based on the concept that a property characterizing a given surface is its spectral reflectance, i.e., the ratio between the flux reflected by the surface and the radiant flux received by the surface, and this ratio is usually similar under direct-plus-diffuse irradiance and under diffuse irradiance when a Lambertian behavior can be assumed. Scene-dependent elements, such as trees, shrubs, man-made constructions, or terrain relief, can block part of the direct irradiance (usually sunbeams), in which part of the surface only receives diffuse irradiance. As a consequence, shadowed surfaces comprising pixels of the image created by the UAV remote sensor appear. Regardless of whether the imagery is analyzed by means of photointerpretation or digital classification methods, when the objective is to create land cover maps, it is hard to treat these areas in a coherent way in terms of the areas receiving direct and diffuse irradiance. The hypothesis of the present work is that the relationship between irradiance conditions in shadowed areas and non-shadowed areas can be determined by following classical empirical line techniques for fulfilling the objective of a coherent treatment in both kinds of areas. The novelty of the presented method relies on the simultaneous recovery of information in non-shadowed and shadowed areas by the in situ spectral reflectance measurements of characterized Lambertian targets followed by smoothing of the penumbra area. Once in the lab, firstly, we accurately detected the shadowed pixels by combining two well-known techniques for the detection of the shadowed areas: (1) using a physical approach based on the sun's position and the digital surface model of the area covered by the imagery; and (2) the image-based approach using the histogram properties of the intensity image. In this paper, we present the benefits of the combined usage of both techniques. Secondly, we applied a fit between non-shadowed and shadowed areas by using a twin set of spectrally characterized target sets. One set was placed under direct and diffuse irradiance (non-shadowed targets), whereas the second set (with the same spectral characteristics) was placed under diffuse irradiance (shadowed targets). Assuming that the reflectance of the homologous targets of each set was the same, we approximated the diffuse incoming irradiance through an empirical line correction. The model was applied to all detected shadowed areas in the whole scene. Finally, a smoothing filter was applied to the penumbra transitions. The presented empirical method allowed the operational and coherent recovery of information from shadowed areas, which is very common in high-resolution UAV imagery.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Driving Forces of Forest Expansion Dynamics across the Iberian Peninsula (1987-2017), A Spatio-Temporal Transect

  • Padial-Iglesias, Mario|||0000-0002-8173-5353
  • Ninyerola i Casals, Miquel|||0000-0002-1101-0453
  • Serra Ruiz, Pere|||0000-0003-1023-5586
  • González Guerrero, Óscar|||0000-0001-8685-5971
  • Espelta Morral, Josep Maria|||0000-0002-0242-4988
  • Pino i Vilalta, Joan|||0000-0003-0939-7502
  • Pons, Xavier|||0000-0002-6924-1641
This study analyzes the spatio-temporal dynamics of the drivers of forest expansion in the Iberian Peninsula for the periods 1987-2002-2017 through a 185 km-wide north-south Landsat scene transect. The analysis has considered a variety of biogeographical regions [0-3500 m.a.s.l, annual rainfalls 150-2200 mm] and 30 explanatory variables. A rigorous map production at 30 m resolution, including detailed filtering methods and uncertainty management at pixel scale, provided high-quality land cover maps. The main forest expansion trajectories were related to explanatory variables using boosted regression trees. Proximity to previous forests was a key common factor for forest encroachment in all forest types, with other factors being distance to the hydrographic network, temperature and precipitation for broadleaf deciduous forests (BDF), precipitation, temperature and solar radiation for broadleaf evergreen forests (BEF) and precipitation, distance to province capitals, and solar radiation for needleleaf evergreen forests (NEFs). Results also showed contrasting forest expansion trajectories and drivers per biogeographic region, with a high dynamism of grasslands towards new forest in the Eurosiberian and the mountainous Mediterranean regions, a high importance of croplands as land cover origin of new forest in the Mesomediterranean, and increasing importance over time of socioeconomic drivers (such as those employed in the industry sector and the utilized agricultural area) in the Supramediterranean region but the opposite pattern in the Southern Mesomediterranean. Lower precipitation rates favored new NEFs from shrublands in the Thermomediterraean region which, together with the Northern Mesomediterranean, exhibited the highest relative rates of new forests. These findings provide reliable insights to develop policies considering the ecological and social impacts of land abandonment and subsequent forest expansion.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phenological sensitivity and seasonal variability explain climate-driven trends in Mediterranean butterflies

  • Colom, Pau|||0000-0003-0309-8886
  • Ninyerola i Casals, Miquel|||0000-0002-1101-0453
  • Pons, Xavier|||0000-0002-6924-1641
  • Traveset, Anna
  • Stefanescu, Constantí|||0000-0001-8952-7869
Although climate-driven phenological shifts have been documented for many taxa across the globe, we still lack knowledge of the consequences they have on populations. Here, we used a comprehensive database comprising 553 populations of 51 species of north-western Mediterranean butterflies to investigate the relationship between phenology and population trends in a 26-year period. Phenological trends and sensitivity to climate, along with various species traits, were used to predict abundance trends. Key ecological traits accounted for a general decline of more than half of the species, most of which, surprisingly, did not change their phenology under a climate warming scenario. However, this was related to the regional cooling in a short temporal window that includes late winter and early spring, during which most species concentrate their development. Finally, we demonstrate that phenological sensitivity-but not phenological trends-predicted population trends, and argue that species that best adjust their phenology to inter-annual climate variability are more likely to maintain a synchronization with trophic resources, thereby mitigating possible negative effects of climate change. Our results reflect the importance of assessing not only species' trends over time but also species' abilities to respond to a changing climate based on their sensitivity to temperature.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Fusing Landsat and SAR Data for Mapping Tropical Deforestation through Machine Learning Classification and the PVts-β Non-Seasonal Detection Approach, Fusion des donnees Landsat et RSO pour la cartographie de la déforestation tropicale grâce à la classification par apprentissage automatique et a l'approche de detection non saisonnière PVts-b

  • Tarazona Coronel, Yonatan|||0000-0002-5208-1004
  • Zabala Torres, Alaitz|||0000-0002-3931-4221
  • Pons, Xavier|||0000-0002-6924-1641
  • Broquetas, Antoni|||0000-0001-9801-9145
  • Nowosad, Jakub|||0000-0002-1057-3721
  • Zurqani, Hamdi A.|||0000-0002-9250-4534
This article focuses on mapping tropical deforestation using time series and machine learning algorithms. Before detecting changes in the time series, we reduced seasonality using Photosynthetic Vegetation (PV) index fractions obtained from Landsat images. Single and multi-temporal filters were used to reduce speckle noise from Synthetic Aperture Radar (SAR) images (i.e., ALOS PALSAR and Sentinel-1B) before fusing them with optical images through Principal Component Analysis (PCA). We detected only one change in the two PV series using a non-seasonal detection approach, as well as in the fused images through five machine learning algorithms that were calibrated with Cross-Validation (CV) and Monte Carlo Cross-Validation (MCCV). In total, four categories were obtained: forest, cropland, bare soil, and water. We then compared the change map obtained with time series and that obtained with the classification algorithms with the best calibration performance, revealing an overall accuracy of 92.91% and 91.82%, respectively. For statistical comparisons, we used deforestation reference data. Finally, we conclude with some discussions and reflections on the advantages and disadvantages of the detections made with time series and machine learning algorithms, as well as the contribution of SAR images to the classifications, among other aspects.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Does the gap-filling method influence long-term (1950-2019) temperature and precipitation trend analyses?

  • Padial-Iglesias, Mario|||0000-0002-8173-5353
  • Pons, Xavier|||0000-0002-6924-1641
  • Serra Ruiz, Pere|||0000-0003-1023-5586
  • Ninyerola i Casals, Miquel|||0000-0002-1101-0453
Incomplete climatic series require gap-filling approaches so they can be used in homogeneous long-term spatiotemporal trend analyses. Monthly mean Temperature (MT) and Precipitation (PR) databases from the meteorological stations of the Iberian Peninsula have a high percentage of data gaps: 80.21% and 73.25% for the period 1950-1979 (P1), and 61.82% and 58.03% for the period 1980-2019 (P2). The different gap-filling methods of the Emmentalsoftware were tested to determine their performance and whether the gap-filling method influences these trend analyses. The nonparametric Theil-Sen approach and the Mann-Kendall test were used to assess the trend magnitude and its significance. The results showed (i) similar patterns between the evaluated methods, but with (ii) spatial differences, especially during P1. (iii) The comparison between standardized gap-filled and unfilled series did not show significant differences for MT and PR, although a reduction in the trend variability occurred in the first case (filled). (iv) Summer mean temperatures showed the largest warming trend (0.27 °C/decade), while autumn showed the smallest (0.21°C/decade) (median data for P1 and P2). Overall, an increase of 1.45 °C occurred in the entire period (annual median). (v) PR did not show any clear trend in any month in the entire period. This research has shown how climate trends can be affected by a reduction in data variability due to the application of gap filling methods. Although accounting for variability is of crucial importance for climate analysis, ignoring discontinuities in derived climatic surfaces causes greater spatiotemporal inconsistencies in derived climate products.