Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Multisensor data fusion calibration in IoT air pollution platforms

  • Ferrer Cid, Pau
  • Barceló Ordinas, José María
  • García Vidal, Jorge
  • Ripoll, Anna
  • Viana, Mar
© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article investigates the calibration of low-cost sensors for air pollution. The sensors were deployed on three Internet of Things (IoT) platforms in Spain, Austria, and Italy during the summers of 2017, 2018, and 2019. One of the biggest challenges in the operation of an IoT platform, which has a great impact on the quality of the reported pollution values, is the calibration of the sensors in an uncontrolled environment. This calibration is performed using arrays of sensors that measure cross sensitivities and therefore compensate for both interfering contaminants and environmental conditions. This article investigates how the fusion of data taken by sensor arrays can improve the calibration process. In particular, calibration with sensor arrays, multisensor data fusion calibration with weighted averages, and multisensor data fusion calibration with machine learning models are compared. Calibration is evaluated by combining data from various sensors with linear and nonlinear regression models., This work was supported in part by the NationalSpanish funding under Grant TIN2016-78473-C3-1-R, in part by RegionalProject under Grant 2017SGR-990, in part by EU H2020 CAPTOR Project, inpart by AGAUR SGR44, in part by the Agencia Estatal de Investigación underGrant CGL2017-82093-ERC, and in part by the Spanish Ministry of Economy,Industry and Competitiveness under Grant EUIN2017-85799, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

LoRaMoto: a communication system to provide safety awareness among civilians after an earthquake

  • Pueyo Centelles, Roger
  • Meseguer Pallarès, Roc
  • Freitag, Fèlix
  • Navarro Moldes, Leandro
  • Ochoa, Sergio
  • Santos, Rodrigo
© <2020>. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Civilians in areas hit by earthquakes become in particular concerned about the safety of family and friends. However, outages in communications networks following these events limit their capacity to get information. So, people drive their cars to check on their loved ones, risking their own lives and hindering the activities of first response organizations. This article proposes LoRaMoto, a communications system that allows civilians to exchange information about their status with others without hampering the first responders and minimizing their exposure to hazards. Furthermore, the information exchanged can be aggregated to support the operations of emergency management. LoRaMoto extends the LoRaWAN architecture and implements a packet-forwarding mechanism between the end nodes of the system. This helps overcome potential infrastructure blackouts after an earthquake, so it provides safety awareness information when it is most needed. We evaluated the system performance and capacity of this system by simulating its use in a realistic environment, testing a baseline configuration, and exploring several modifications to better understand its scalability and its portability to other emergency environments. The simulation results show how the LoRaMoto system can meet the communication needs of civilians, and also keep first response and emergency management organizations informed., This work was partially supported by the European Regional Development Fund and the Spanish government (TIN2016-77836- C2-2-R and PID2019-106774RB-C21), by the Spanish State Research Agency (AEI) under contracts PCI2019-111850-2 and PCI2019-111851-2, and the Generalitat de Catalunya, Spain (2017 SGR-990)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

A comparative study of calibration methods for low-cost ozone sensors in IoT platforms

  • Ferrer Cid, Pau
  • Barceló Ordinas, José María
  • García Vidal, Jorge
  • Ripoll, Anna
  • Viana, Mar
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper shows the result of the calibration process of an Internet of Things platform for the measurement of tropospheric ozone (O 3 ). This platform, formed by 60 nodes, deployed in Italy, Spain, and Austria, consisted of 140 metal–oxide O 3 sensors, 25 electro-chemical O 3 sensors, 25 electro-chemical NO 2 sensors, and 60 temperature and relative humidity sensors. As ozone is a seasonal pollutant, which appears in summer in Europe, the biggest challenge is to calibrate the sensors in a short period of time. In this paper, we compare four calibration methods in the presence of a large dataset for model training and we also study the impact of a limited training dataset on the long-range predictions. We show that the difficulty in calibrating these sensor technologies in a real deployment is mainly due to the bias produced by the different environmental conditions found in the prediction with respect to those found in the data training phase., Peer Reviewed, Postprint (author's final draft)