Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Passive Sensing for the Internet of Medical Things, A Low-Cost Battery-Less Wearable Sweat Rate Sensor

  • López-Soriano, Sergio|||0000-0002-1219-7125
  • Parrón Granados, Josep|||0000-0002-1577-6333
  • Melià-Seguí, Joan|||0000-0001-8473-4500
Continuous monitoring of the sweat rate can support the early diagnosis of several chronic diseases such as Parkinson's or diabetes. However, current wearable wireless devices use batteries that have a limited operating time, also increasing their cost, and thus, reducing their accessibility to a large part of the population. In that sense, passive IoT technologies could be exploited to produce battery-less low-cost antenna-based sensors (ABS). In this paper, we propose a UHF RFID battery-less antenna-based sensor that transforms the amount of sweat accumulated inside a microfluidic channel into a variation of the tag response. In order to provide multi-level sensing, we rely on the IC self-tuning sensor code, which is passively backscattered to the reader unit, instead of channel information which may provide insufficient resolution depending on the geographical location. The sensor performance is validated experimentally, achieving an accuracy of 90% in the estimation of the sweat loss and 95% in the estimation of the average sweat rate.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Battery-less UHF RFID sensor for soil moisture monitoring

  • Alsultan, Mohammed A.|||0000-0003-2988-042X
  • Melià-Seguí, Joan|||0000-0001-8473-4500
  • Parrón Granados, Josep|||0000-0002-1577-6333
  • López-Soriano, Sergio|||0000-0002-1219-7125
Soil moisture monitoring is essential for optimizing irrigation strategies, enhancing crop yields, and conserving water resources in precision agriculture. Traditional sensing methods often rely on battery-powered devices, which require maintenance and periodic replacement. This work introduces a batteryless ultrahigh frequency radio frequency identification (UHF RFID) soil moisture sensor that leverages RFID technology and an interdigitated capacitor (IDC) for capacitive sensing. The proposed sensor integrates a meandered dipole antenna and an EM4152 RFID chip, enabling wireless monitoring of soil Volumetric Water Content (VWC) without the need for an external power source. The sensor's performance is validated through controlled soil moisture experiments, where capacitance readings are correlated with reference measurements from the commercial TEROS 10 soil moisture sensor. The sensor was tested and calibrated using three different soil types: sandy, clay, and a commercial combo substrate. The results demonstrate strong linear correlations with TEROS 10 measurements across all soil types, with coefficients of determination of R2 = 0.9648 (sandy), R2 = 0.9512 (clay), and R2 = 0.9444 (combo). Furthermore, tests conducted at varying water contents and a read range of up to 3.5 meters validate the sensor's robustness across different soil conditions. The findings highlight the potential of battery-less RFID-based sensing for sustainable and maintenance-free soil moisture monitoring in agricultural applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An Analytical Model for Monitoring Liquid Volume in Absorbent Media Using Capacitive Sensors

  • López-Soriano, Sergio|||0000-0002-1219-7125
Sweat rate monitoring is essential for the accurate interpretation of biomarker concentrations in wearable sweat sensors. In addition, sweat rate measurement is particularly relevant for the early detection of diseases associated with hyperhidrosis and hypohidrosis, conditions that affect thermoregulation, hydration balance, and metabolic function. This work presents an absorbent-based capacitive sensor for sweat rate monitoring applications. The sensor consists of a parallel-plate architecture, where an absorbent textile acts as the dielectric. A novel analytical model based on mixing rules enables real-time estimation of absorbed liquid volume from capacitance measurements. To account for slow response and evaporation effects, an empirical dynamic model is introduced, improving accuracy under varying sweat rates. Experimental validation across four infusion rates demonstrates a volumetric estimation error below 10% and average sweat rate error below 3%. These results position the system as a viable candidate for autonomous sweat monitoring. Moreover, the sensing architecture is well-suited for industrial applications involving fluid absorption in porous media, such as textile processing or hygiene product testing.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

A Lightweight Algorithm for Efficient Synchronization in LoRaWAN Class-B Networks

  • Scalambrin, Luca
  • Zanella, Andrea
  • Vilajosana, Xavier
The Internet of Things (IoT) has become increasingly relevant in the context of large-scale asset monitoring, revolutionizing the way data is collected and analyzed. In addition to low power consumption and long-range coverage, these applications require precise time synchronization to generate accurate data to assess the structural health of critical assets. Meeting these synchronization requirements is challenging because the devices are battery-powered, deployed in extensive environments, and limited in computational capabilities. LoRaWAN, a widely adopted standard for long-range wireless networks, addresses some of these challenges. In fact, its Class-B operational mode introduces a time synchronization mechanism based on a beacon broadcasting system. However, the energy-intensive nature of this configuration can be inefficient when devices rely on limited power sources. To address this, we introduce a predictive mechanism to dynamically adjust the beacon period in LoRaWAN Class-B networks. Extensive experimentation proves that our approach reduces the average interbeacon synchronization error by three orders of magnitude compared to the LoRaWAN standard. This improvement in timing accuracy enables more efficient energy usage, extending device battery life by more than three times relative to standard configurations. Notably, these gains are achieved with a lightweight implementation requiring only 2.5 KB of memory. Overall, our solution enhances both synchronization performance and energy efficiency in an established standard, making it a practical and cost-effective solution for IoT-based monitoring systems.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

Multitextile and Multiband UHF RFID Antenna-Based Sensor for Noninvasive eHealth Hydration Monitoring

  • Alsultan, Mohammed
  • López-Soriano, Sergio
  • Melià-Seguí, Joan
Continuous monitoring of body fluids is essential to maintain health and prevent critical issues such as dehydration, especially among those engaged in physical activities, living in harsh environments such as warm climates, or belonging to vulnerable populations. Traditional hydration monitoring solutions often involved complex measurements, required body-worn devices, or relied on batteries, making them impractical for widespread use among the general population. However, the development of low-cost, noninvasive hydration monitoring technology that can be integrated into textiles, together with the generalization of the digital product passport (DPP), could play a crucial role in democratizing and enhancing eHealth. Building upon previous studies, this work delves into the use of ultrahigh-frequency (UHF) radio frequency identification (RFID) antennas as hydration sensors on various fabrics and frequency bands. After dielectric characterization of different fabrics when mixed with synthetic euhydrated and dehydrated sweat, we developed and evaluated different prototypes compatible with different fabrics, achieving a read range four times larger compared with previous works. In a controlled laboratory environment, we achieved 100% accuracy classifying between euhydrated and dehydrated sweat in fabrics with liquid concentrations greater than 50%. Furthermore, the improved classification method ensures compatibility with both the Federal Communications Commission (FCC) and European Telecommunications Standards Institute (ETSI) bands.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

Accelerating RFID Tag Counting for Low-Latency and High-Reliability Applications

  • Gatnau Sarret, Marta
  • Alfayoumi, Sobhi
  • Li, Heyi
  • Bhattacharyya, Rahul
  • Sarma, Sanjay
  • Melià-Seguí, Joan
Nowadays, radio frequency identification (RFID) systems are extensively used in many applications, such as warehouse management, inventory tracking, sensing, or localization. The usage of passive RFID tags allows for low maintenance, thus reducing complexity and cost. However, in scenarios with a large population of tags, the process of discovering tags is time-consuming and may exceed the time requirements of certain applications. Rapidly anticipating the number of tags in advance, namely, RFID counting, would help at optimizing the system efficiency. This work proposes an alternative conceptualization of the counting process, embedded within a novel framework that redefines collisions as a usable resource, preserving backward compatibility and contributing to lower the system latency up to 97% with a reliability of minimum 95%, depending on the scenario. Extensive system-level simulations and experimental results demonstrate that our proposed solution successfully detects an entire population of tags within a single round, offering significant advantages for various applications, including a subsequent identification phase.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

Low-Cost RFID-Based Sensor Integrated in Textile for Noninvasive Pervasive Hydration Monitoring

  • Melià-Seguí, Joan
  • Bhattacharyya, Rahul
  • López-Soriano, Sergio
  • Vilajosana, Xavier
  • Sarma, Sanjay
Health monitoring during physical exercise is relevant to avoid issues like dehydration, especially for vulnerable populations or in warm climates, since it may become critical in these cases. Current dehydration monitoring solutions are not intended for the general population, since they are expensive or require the action of wearing the device. Hence, a cost-efficient monitoring technology that could be integrated into everyday clothing would allow the democratization of eHealth, thus improving the health of the general population. We have been researching low-cost sensing technologies, allowing the detection of dehydration, while maximizing the tradeoff between functionality and cost. In this article, we present a passive antenna-based ultrahigh-frequency (UHF) radio-frequency identification (RFID) sensor, allowing noninvasive dehydration monitoring on fabrics at low cost. We determine that the dielectric relative permittivity ( ε′r ) and loss tangent ( tan(δ) ) values exhibit a change up to 10 and 0.3, respectively, in the presence of euhydrated (i.e., regular hydration) and dehydrated sweat in the UHF band. We use these results to design a UHF RFID tag attached to a fabric, capable of differentiating between these hydration states. After prototype implementation, we demonstrated good classification metrics in a laboratory environment, reaching a 100% accuracy using K -means unsupervised learning when attempting to differentiate between euhydrated and dehydrated sweat in fabrics with concentrations over 58%. To the best of our knowledge, this combination of results is presented for the first time in the literature. Our results demonstrate the feasibility of detecting dehydration at low cost in an unassisted manner, and thus, the possibility of democratizing eHealth for the general population.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

Next-Generation RFID Collision Decoding Using I/Q Constellation Geometry

  • Alfayoumi, Sobhi
  • Li, Heyi
  • Villa González, Fatima
  • Gatnau Sarret, Marta
  • Bhattacharyya, Rahul
  • Melià-Seguí, Joan
  • Sarma, Sanjay
Collisions caused by simultaneous tag responses are a fundamental challenge in radio frequency identification (RFID) systems, limiting their throughput and scalability. Existing solutions often rely on complex signal processing or hardware modifications, reducing practicality. This article presents a novel collision resolution algorithm, fully compatible with the EPC Gen2 standard, that decodes individual tag responses by analyzing I/Q constellation patterns formed during collisions. The method introduces a new constellation cluster labeling strategy inspired by geometric alignment from computer vision, which uses analytical geometry and pattern matching techniques to efficiently resolve tag states without requiring retransmissions, channel estimation, or hardware changes. The algorithm reliably resolves up to four colliding tags and achieves up to a 33% relative gain in time-normalized throughput over framed slotted ALOHA (FSA). To support next-generation protocol enhancements, we also propose a multitag acknowledgment configuration, where the algorithm achieves up to a 121% relative gain, with peak performance at a slot-to-tag ratio (STR) of 0.5. Moreover, the algorithm achieves a 25× speedup in decoding time compared to the latest state-of-the-art method, significantly enhancing its practicality for real-time deployment. These results demonstrate the method’s effectiveness across both current and next-generation RFID systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

UHF RFID wristbands, a long-range, durable, flexible, and low-cost tag antenna design

  • López-Soriano, Sergio|||0000-0002-1219-7125
  • Melià-Seguí, Joan|||0000-0001-8473-4500
  • Parrón Granados, Josep|||0000-0002-1577-6333
This contribution is focused on the performance evaluation of a long-range patch-type antenna for ultra-high frequency (UHF) radiofrequency identification (RFID) wristband tags. The antenna design was presented in the IEEE International Conference on RFID Technology and Applications (RFID-TA), held on September 4-6, 2023, Aveiro, Portugal, under the title "A durable and flexible, low-cost tag antenna design for UHF RFID wearable applications". First, the theoretical and practical evaluation of the wristband tag antenna is conducted in four different scenarios. Next, the studied solution is benchmarked against a selection of the current commercial solutions. The proposed antenna design is mounted on a flexible and low-cost Teflon (PTFE) substrate, and it consists of a disconnected metal-substrate-metal layered structure. To produce a light and comfortable wearable device, the wristband design constraints limit the thickness to 1 mm and the width to 3 cm. The design is intended to be used in human identification and tracking applications while providing enough durability to endure for a prolonged period without significant antenna de-tuning. The proposed wristband is designed to operate in the FCC band (902-928 MHz) and it can reach distances over 3-5 meters, depending on the microchip sensitivity. The results of the experiments show that the performance of the proposed wristband design is comparable to current commercial solutions, while offering a different set of features. A discussion on the comparison between the current solutions and the proposed wristband antenna is provided in the text.