Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sensitivity Optimization in Single-Frequency Planar Microwave Sensors for Solid and Liquid Characterization and Microfluidics

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Ghorbani, Kamran|||0000-0001-8767-0207
  • Martín, Ferran|||0000-0002-1494-9167
This article reviews some recent strategies for sensitivity optimization in planar microwave sensors operating at a single frequency, namely, phase-variation sensors and magnitude-variation sensors. In most cases, both sensor types (fed by a single-tone harmonic signal) consist of a transmission line-based structure, typically (although not necessarily) loaded or coupled with a resonant element, and can operate either in reflection or in transmission. Hence, sensitivity optimization requires that either the phase (in phase-variation sensors) or the magnitude (in magnitude-variation sensors) of the reflection or transmission coefficient exhibits a strong variation with changes in the input variable (or measurand), typically, the permittivity of the so-called material under test (MUT) or any other variable related to it (humidity, temperature, proximity, and so on). It is shown in this article that the key aspect for sensitivity enhancement in phase-variation sensors is to achieve a high slope in the phase response at the operating frequency. Similarly, a high slope in the magnitude response at the operating frequency contributes to boost the sensitivity in magnitude-variation sensors. Nevertheless, there are other strategies to optimize the sensitivity in magnitude-variation sensors that will also be discussed (e.g., disrupting the symmetry in balanced structures, such as couplers). Several prototype examples and potential applications are reported to illustrate the high potential of these sensors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave Capacitive Pressure Sensor Based on an Additively Manufactured Elastic Layer

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Rodini, Sandra|||0000-0002-2107-2826
  • Genovesi, Simone|||0000-0002-5323-1780
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Costa, Filippo|||0000-0001-7572-2014
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a capacitive sensor useful for measuring pressure in the range 0 Pa - 2460 Pa. The transduction mechanism is capacitance variation caused by changes in the force exerted on the sensing element. Such sensing element is a one-port coplanar waveguide (CPW) terminated with a conductive patch wider than the CPW central strip and a step impedance resonator (SIR), etched in an independent substrate and capacitively coupled to the patch. By sandwiching an additively manufactured malleable (elastic) material between the CPW and the SIR substrate, pressure changes modify the capacitance of the SIR due to the variation of (i) the dielectric constant of such material and (ii) the separation between the SIR and CPW metal layers. The output variable is the phase of the reflection coefficient at the operating frequency, set to a value (within the microwave range) where the phase response exhibits a high phase slope (since this boosts the sensitivity). Thus, the device is a single-frequency sensor that simply necessitates a microwave oscillator, or a voltage-controlled oscillator (VCO), for signal generation in operative environment. The maximum achieved sensitivity is 65°/kPa.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reflective-mode phase-variation sensors based on a movable step impedance resonator (SIR) and application to micrometer-scale motion sensing

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Vélez, Paris|||0000-0001-6502-5987
  • Adolphs Saura, Karl|||0009-0004-1916-5646
  • Ghorbani, Kamran|||0000-0001-8767-0207
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a novel reflective-mode phase-variation sensor based on a movable step impedance resonator (SIR) implemented in coplanar waveguide (CPW) technology. The sensing principle is the variation of the phase of the reflection coefficient at a specific (operating) frequency generated by SIR motion. The sensor is modeled by a transmission line terminated with a series resonator connected to ground, and the reactive element subjected to motion-related variations is the SIR capacitance. The movable SIR, etched on an independent substrate, can be displaced either vertically or transversally, i.e., orthogonal to the symmetry plane of the CPW. In the first case, the device can be used as a highly sensitive proximity sensor with 10- μ m resolution. In the second case, the device can operate either as a linear or angular displacement and velocity sensor, provided that a linear or a circular chain of SIRs is etched in a movable substrate. The measurement of the (medium/long) range linear or angular displacement and velocity is based on pulse counting of the phase-modulated signal generated in the reflection coefficient by the motion of the SIR chain (transversely to the axis of the CPW). The presented prototypes, a micrometer-scale proximity sensor and a linear displacement/velocity sensor, validate the approach and point out the versatility of the proposed structure for motion sensing.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Capacitive Sensor for Micrometer-Scale Proximity Detection with Microwaves

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Adolphs Saura, Karl|||0009-0004-1916-5646
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a highly sensitive proximity sensor with micrometer-scale resolution. The working principle is the change in the capacitance of a movable step-impedance resonator (SIR), in relative (vertical) motion with respect to the static part, a pair of matched lines terminated with a patch capacitance and sharing the same axis. If the patches of the lines are aligned with the SIR patches, the resulting structure is a two-port device loaded with a series connected resonator with variable capacitance (caused by the SIR vertical motion). The output signal of the reported proximity sensor is the phase of the transmission coefficient at the operating frequency. Such frequency can (canonically) be the resonance frequency of the SIR when the substrate where such element is etched is in contact with the static part, but the device can be tuned to different operating frequencies, opening the possibility to further enhance the sensitivity. Thus, this transmission-mode phase-variation sensor is a single-frequency device (this simplifies the electronics required for sensor feeding and processing in situations where a vector network analyzer cannot be used). An exhaustive sensitivity analysis for sensor operation at the resonance frequency of the SIR is carried out in the paper. According to such an analysis, it is concluded that for sensitivity (and resolution) optimization, the SIR must be designed with a long narrow strip and small metal patches. Nevertheless, from a simulation-based analysis, it is shown that the sensitivity can be dramatically boosted up by device operation at the frequency where the phase of the transmission coefficient is 180º, provided the static part substrate is adequately chosen. Three prototype proximity sensors are presented and experimentally validated to demonstrate all these aspects. The achieved maximum sensitivity, resolution, and dynamic range in one of such prototypes are 4485º/mm, 5 m, and 0.1 mm, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Discussion on Sensitivity Optimization in Reflective-Mode Phase-Variation Permittivity Sensors Based on Semi-Lumped Resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Canalias, Xavier|||0009-0002-6473-7514
  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Martín, Ferran|||0000-0002-1494-9167
Typically, the operating frequency in single-frequency reflective-mode phase-variation permittivity sensors based on semi-lumped resonators (e.g., step-impedance resonators-SIRs) is set to the resonance frequency of the sensing resonator when it is loaded with the so-called reference (REF) material, f . For the case of an SIR-based sensor, if the ratio between the inductance and the capacitance is high (corresponding to a high- Q resonator), the sensitivity in the limit of small perturbations of the dielectric constant (in the vicinity of that of the REF material) is also high. However, the optimum frequency for sensitivity optimization in the limit of small perturbations neither corresponds to the resonance frequency nor coincides with the frequency of maximum phase slope. Such frequencies are calculated in this paper, and it is shown that the optimum frequency for sensitivity optimization is located between the frequency of maximum phase slope and the resonance frequency, although such frequencies tend to coincide for high- Q sensing resonators. This aspect is validated in this paper from electromagnetic simulation and experiment.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Sensitive Microfluidic Sensor With Weakly Coupled Dumbbell Defect-Ground-Structure Resonators for Volume Fraction Determination in Liquid Mixtures

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a highly sensitive reflective-mode phase-variation permittivity sensor implemented by means of a pair of weakly coupled dumbbell defect-ground-structure (DB-DGS) resonators, the sensing elements, excited by a microstrip line. Weak magnetic coupling between the DB-DGS sensing resonators generates two closely spaced resonances, the separation of which can be adjusted by the coupling level. Since the phase of the reflection coefficient experiences an excursion of 360° between such frequencies, the phase slope can be made arbitrarily high. Thus, by tuning the device within that frequency range, the phase response of the sensor is highly sensitive to variations in the dielectric constant of any material surrounding the DB-DGS resonators, e.g., a liquid under test (LUT). This configuration, with the sensing elements etched in the ground plane, avoids any interference between the driving line and the LUT, or any mechanical accessory required for operation, thereby enhancing the sensor's practical application. Specifically designed for detecting small concentration changes in mixtures of water and isopropanol, the sensor achieves a peak sensitivity of 293°/% and a resolution of less than 0.1% with the presented setup.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

AI-Driven Battery-Free Wireless Sensing of Hazardous Liquid Spills via a Frequency-Selective Surface in a Monostatic Antenna Configuration

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Niknahad, Fatemeh
  • Maleki Gargari, Ali|||0000-0003-2365-6881
  • Martín, Ferran|||0000-0002-1494-9167
  • Zarifi, Mohammad H.|||0000-0001-5544-3966
The detection of spills is paramount in safeguarding safety and mitigating environmental risks in sensitive environments, including laboratories and industrial facilities. Here, the novel artificial intelligence (AI)-driven, battery-free, and wireless sensing methodology are presented for detecting liquid spills using a monostatic wireless sensing system. The system consists of a frequency-selective surface (FSS) serving as the sensor, in conjunction with a horn antenna that functions as the readout equipment. The sensing structure features a 25 × 25 resonator array with a 7-mm periodicity, operating at a resonant frequency of 7.2 GHz. The system analyzes the renormalized S11 response to quantify variations caused by the presence of liquid on the FSS, demonstrating a high sensitivity to isopropyl alcohol (IPA) spills. Using machine learning techniques, the framework generates 512 × 512 pixel masks delineating the affected area on the FSS, achieving an F1-score exceeding 0.85 for spill localization. This sensing methodology shows potential for integration with augmented reality (AR) systems, enabling enhanced situational awareness and real-time spill localization. Future work aims to enhance the system's capability to detect more hazardous materials and accurately classify them.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transmission-Mode Phase-Variation Planar Microwave Sensor Based on a Step-Impedance Shunt Stub for High Sensitivity Defect Detection, Dielectric Constant, and Proximity Measurements

  • Canalias, Xavier|||0009-0002-6473-7514
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a highly sensitive planar microwave sensor able to detect tiny changes in the dielectric constant of the medium surrounding the sensing element or other variables related to it. The sensor is a two-port structure consisting of a step-impedance shunt stub made of a cascade of high/low-admittance inverters (implemented by means of quarter-wavelength transmission line sections) terminated with an open-ended quarter- or half-wavelength resonator (the sensitive element). The sensor operates in transmission, is fed by a harmonic (single-frequency) signal, and uses the phase of the transmission coefficient at the frequency of the feeding signal as the output variable. The achieved sensitivity in the fabricated prototype, in the limit of small perturbations, is Smax = -227.9∘ per unit of dielectric constant variation, and the figure of merit (FoM), defined as the ratio between the maximum sensitivity and the area of the sensing region expressed in guided squared wavelengths, is FoM = 7912°/ λ2 . The sensor is the transmission-mode counterpart of previously reported phase-variation sensors based on one-port reflective-mode structures made of a cascade of inverters terminated with a sensing resonator. The advantage of the proposed sensor over those reflective-mode sensors is the fact that the feeding (input) harmonic signal and the (output) signal containing the relevant (phase) information are present at different ports. This fact eases the measurements in applications where, rather than a vector network analyzer (VNA), a phase detector must be used.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Engineering With Loss to Enhance Sensitivity in Microwave Sensors

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
In recent years, the focus of microwave engineering has been on minimizing losses to improve system performance. However, recent research has demonstrated that engineered losses can enhance the performance of microwave components. This paper explores the application of loss engineering to reflective-mode phase-variation microwave sensors, showing how resistive losses can be utilized to achieve unprecedented sensitivity. These sensors, designed to detect small environmental variations, hold great promise for applications in sectors such as agriculture and food processing, healthcare, and civil infrastructure monitoring. By leveraging loss as a deliberate design parameter, this approach repositions losses from a limitation to a key element in enhancing sensor functionality and achieving new levels of measurement precision.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phase-Modulation All-Dielectric and "Green" Electromagnetic Encoders for Motion Sensing and Near-Field Chipless-RFID

  • Adolphs Saura, Karl|||0009-0004-1916-5646
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, a new electromagnetic encoder system for motion sensing and near-field chipless-RFID applications is presented. The system consists of an encoder, based on chains of transversally oriented linear apertures in a dielectric substrate, and a reader with an open-ended quarter-wavelength resonator that is sensitive to the presence of the apertures. The reader can detect variations in the phase of the reflection coefficient due to the motion of the encoder. To validate the encoder system, two encoders are implemented in a low-loss rigid substrate, and four are fabricated in flexible substrates, such as paper and plastic (polyethylene terephthalate -PET). One of the rigid encoders is incremental (with a periodic chain of apertures) and the other one is quasi-absolute (with two aperture sizes), useful for both motion sensing and near-field chipless-RFID. For the encoders implemented in flexible substrates (quasi-absolute in all cases), the apertures are replaced with linear chains of small holes, with a period of p = 2 .3 mm. The resulting density of bits per unit length is DPL = 4.35 bit/cm. Such encoders provide a means to implement cost-effective and eco-friendly ("green") systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microstrip Line loaded with Series Gap and Dumbbell Defect-Ground-Structure (DB-DGS) Resonator for Highly Sensitive Sensing Based on Resonance/Antiresonance, Application to Humidity Measurements

  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
A new planar structure for the implementation of highly sensitive single-frequency microwave sensors is proposed. The key aspect to obtaining high sensitivity is to generate closely spaced resonance and antiresonance frequencies, achieved by means of a microstrip line with a series gap etched on top of a transversely oriented dumbbell defect-ground-structure (DB-DGS) resonator, the sensitive element. By this means, both the magnitude and the phase of the transmission coefficient exhibit a high phase slope between such frequencies. The result is a high sensitivity of either the magnitude or the phase of the transmission coefficient at the operating frequency with the dielectric constant of the environment surrounding the DB-DGS resonator. Advantages of the proposed device are (i) size and simplicity and (ii) isolation between the analyte (or material under test -MUT) and the line strip. Two sensors with different DB-DGS geometry are reported to validate the proposed approach. Using the phase as the main output variable, the maximum sensitivity in one of the prototypes is found to be 88.7° per unit of dielectric constant variation. This sensor has been applied to relative humidity (RH) measurements by using a functional film of polyvinyl alcohol (PVA) deposited on top of the sensing DB-DGS resonator. The average sensitivity in this case is 0.33°/% (note that RH is given in %).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Microwave Sensor System for the Unattended Control of Corrosion in Urban Metallic Infrastructures

  • Vélez, Paris|||0000-0001-6502-5987
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Canalias, Xavier|||0009-0002-6473-7514
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a microwave sensor system (including the electromagnetic module and the associated electronics for signal generation and processing) useful for unattendedly monitoring the corrosion level in urban metallic infrastructures, particularly, streetlights and traffic lights. The electromagnetic module consists of a microstrip line loaded with a slot resonator, the sensitive element, transversely etched in the ground plane. To make the electromagnetic module conformal, a necessity for the intended application, the slot-loaded line has been implemented in a narrow (and hence flexible) low-loss microwave substrate. To adapt it to the circular shape of the metallic infrastructure, streetlights with different curvature shapes in the reported example cases, a conformal 3-D-printed piece of polylactic acid (PLA) has been fabricated. By sandwiching the electromagnetic module between such PLA piece and the surface of the streetlight subjected to corrosion control, perfect contact of it with the sensing element is achieved. The output variable of the sensor is the magnitude of the transmission coefficient of the slot-loaded line at a specific frequency (correlated with the level of corrosion of the surface) converted to a voltage by means of an envelope detector. The functionality of the proposed sensor is validated by means of a complete system, including the associated electronics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transmission-mode phase-variation microwave sensor applied to highly sensitive micrometer-scale thickness measurements

  • Canalias, Xavier|||0009-0002-6473-7514
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a highly sensitive two-port single-frequency permittivity sensor operating in transmission. The device consists of a shunt-connected short-circuited quarter-wavelength resonator (the sensing element) sandwiched between a symmetric configuration of cascaded impedance inverters with alternating high and low impedance. The output variable of the sensor is the phase of the transmission coefficient at the operating frequency, which is highly sensitive to variations in the permittivity of the medium surrounding the sensing resonator. In the proposed two-port sensor, the feeding (harmonic) signal and the output signal do not share the same port, which facilitates retrieving the output variable in scenarios where a vector network analyzer (VNA) cannot be used. The maximum sensitivity in the reported prototype is Smax= -63.94° per unit of dielectric constant variation, whereas the figure of merit (FoM), or ratio between the maximum sensitivity and the area of the sensing region expressed in squared wavelengths, is FoM.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Artificial Intelligence (AI) assisted measurement of glucose, sodium, and potassium concentrations in diluted aqueous solutions using microwaves

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
  • Paredes Marco, Ferran|||0000-0002-7252-1169
This letter proposes an artificial intelligence (AI)-driven noninvasive and contactless microwave sensor capable of determining the composition of aqueous solutions containing three different components: glucose, sodium (Na+), and potassium (K+). The sensing element is a one-port microstrip transmission line loaded with a pair of unequal three-turn complementary spiral resonators (CSRs) etched in the ground plane, as well as a capillary that drives the liquid under test (LUT) to the sensing region (i.e., the slots of the CSR). The two CSRs provide a rich frequency response (reflection coefficient), with many singularities (magnitude notches and phase jumps) over a broad frequency band that are necessary to selectively determine the concentration of the different solute components by virtue of their different dispersive behavior. The complete sensor includes the necessary mechanical accessories to implement an automated system with a liquid pump as well as temperature and fluid control. The system analyzes the renormalized S11 response to quantify the variations generated by the different components of the solution, demonstrating a high capacity of detecting their presence and reliably predicting their concentrations. A convolutional neural network (CNN) with a multilayer perceptron (MLP) maps the renormalized reflection coefficient spectra to solute concentrations. Validated on binary to quaternary mixtures, the method yields mean absolute errors of 8.2 mg/dL (glucose), 6.8 mg/dL (Na+), and 1.2 mg/dL (K+), enabling real-time quantification in complex solutions. This modular approach supports scalable dataset generation and adaptable AI training pipelines for other solutes and liquid matrices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A Versatile Reflective-Mode Phase-Variation Microwave Sensor Based on a Dumbbell Defect-Ground-Structure (DB-DGS) Resonator for Solid and Liquid Characterization

  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Sisó, Gerard|||0000-0003-2576-6558
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a single-frequency planar microwave sensor designed for characterizing solid and liquid samples. The sensor operates in reflective-mode one-port configuration utilizing a microstrip line with a series inductive strip terminated with a transversely oriented dumbbell defect-ground-structure (DB-DGS) resonator (etched in the ground plane), the sensing element. The output variable is the phase of the reflection (RX) coefficient at a specific (operating) frequency. The device is modeled by a lumped circuit consisting of a parallel resonator (accounting for the DB-DGS resonator) series connected to an inductor and a parasitic capacitor. This configuration enables the generation of a steep phase slope in the RX coefficient at the operating frequency, which is essential for achieving high sensitivity. The sensor can be applied to the detection of small variations in the permittivity of the environment surrounding the sensing element in the vicinity of a reference (REF) value, where such REF value can be selected at wish by conveniently tuning the operating frequency. To demonstrate the versatility of the proposed device, three different scenarios are considered: 1) dielectric constant of solid samples measurement; 2) ethanol concentration in deionized (DI) water determination; and 3) detection of water/detergent in wine. The maximum sensitivity achieved for the dielectric characterization of solids is -382.44° per unit of dielectric constant. For liquid sensing, the sensor exhibits sensitivities of 9°/% for ethanol concentration in water and 0.88°/% for detecting water/detergent mixtures in wine. Despite the similar electromagnetic characteristics of water/detergent and wine, the proposed sensor can resolve a volume fraction (percentage of water/detergent in wine) as little as 2.5%, demonstrating high sensitivity. For the mixture of ethanol and DI water, the sensor is capable of detecting a concentration of 1% of ethanol.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microstrip Configurations of Reflective-Mode Phase-Variation Permittivity Sensors Based on Weakly Coupled Step Impedance Resonators (SIR), An Analysis to the Light of Circuit Duality

  • Borràs Sarsa, Joaquín
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents and experimentally validates various topologies of one-port reflective-mode phase-variation permittivity sensors based on weakly coupled step impedance resonators (SIRs), the sensing elements, implemented in microstrip technology. The differences between such topologies concern the specific configuration, either series or parallel, of the SIR driven by the feeding (harmonic) signal, and the type of coupling, either electric or magnetic, between the SIRs. Thus, four different sensor topologies result. These sensors are modeled by lumped element circuits that describe their behavior to a very good approximation and are useful to predict the sensitivity in the limit of small perturbations. It is shown that the models of one of the pairs of these four sensors are circuit duals, and such circuit duality applies also to the models of the other pair. In all cases, a high (maximum) sensitivity is achievable provided the coupling (either electric or magnetic) between the SIRs pair is weak. Since the sensing regions in the reported sensors are also small, the resulting figures of merit (FoM), or ratio between the maximum sensitivity and the area of the sensing region expressed in squared guided wavelengths, are very competitive.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Low-Cost and Highly Sensitive Reflection Mode Phase Variation Sensor for Bacteria Detection

  • Piekarz, Ilona|||0000-0001-9862-5794
  • Sorocki, Jakub|||0000-0002-6216-7581
  • Skowroński, Witold|||0000-0002-4568-2688
  • Górska, Sabina
  • Gruszczynski, Slawomir|||0000-0002-0370-8640
  • Wincza, Krzysztof|||0000-0002-4471-7842
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a reflective-mode planar microwave biosensor based on phase-variation allowing for the detection of low bacteria concentration. The sensor is a one-port coplanar waveguide (CPW) structure implemented by means of a pair of weakly coupled step-impedance resonators (SIRs). The high sensitivity needed for bacteria detection is obtained by modulating (reducing) the coupling level between the pair of resonators, which simply requires separating such resonators enough. A sensor demonstrator is developed to operate in K-band, resulting in a compact structure manufactured using a single-layer metal-on-glass technology. An experimental study is conducted on an example of detection of various concentrations of E. coli bacteria, where the phase variation at single frequency is an indicator of the bacteria presence. The measurement results show that as low as 100 colony-forming-unit in 1 ml (100 CFU/ml) of bacteria suspension can be easily detected with sensitivity of 3.24° per order of concentration, indicating potential to go even lower with detection threshold, which is superior to many state-of-the-art E. coli microwave biosensors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Planar Microwave Sensors, State of the Art and Applications

  • Juan, Carlos Gabriel|||0000-0003-0793-7958
  • Grenier, Katia|||0000-0002-5056-5582
  • Zarifi, Mohammad H.|||0000-0001-5544-3966
  • Ebrahimi, Amir|||0000-0002-1787-2230
  • Martín, Ferran|||0000-0002-1494-9167
This review paper focuses on the latest advances and applications of planar microwave sensors contributed by the most prominent researchers in the field. The paper presents the different working principles, design approaches, fabrication technologies, materials, and applications of a wide variety of planar sensors operating at microwave and millimeter-wave frequencies, including contact and contactless sensors, wired and wireless sensors, microfluidic sensors, "green" sensors, wearables, biosensors, physical sensors, chemical sensors, and more. Advanced techniques for sensor performance optimization (e.g., sensitivity, resolution, selectivity, etc.), based on artificial intelligence, active feedback loops, microwave spectroscopy, losses engineering, etc., will also be discussed in the paper.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transmission-Mode Phase-Variation Sensor Based on Weakly Coupled Distributed Resonators and Phase Detector for High-Sensitivity Applications

  • Canalias, Xavier|||0009-0002-6473-7514
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Kurniawati, Nazmia|||0000-0002-0686-8754
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a highly sensitive single-frequency permittivity sensor based on a pair of weakly coupled quarter-wavelength resonators. The sensor is a two-port structure operating in transmission, with the pair of coupled resonators shunt connected to the host line, and the output variable is the phase of the transmission coefficient at the operating frequency, i.e., the pole frequency. The maximum sensitivity of the reported prototype is Smax = -593.5° per dielectric constant, and the figure of merit, or ratio between the maximum sensitivity and the area of the sensing region expressed in terms of the squared wavelength, is FoM = 25 917°/λ2, which is a very competitive value. By operating in transmission, the main advantage of the proposed sensor over reflective-mode phase-variation sensors based on coupled resonators is the separation of the input (feeding) signal and the output (transmitted) signal at different ports. This facilitates retrieving the phase information in a real scenario, i.e., without the use of a vector network analyzer. Specifically, a phase detector for that purpose is considered in this letter. Sensor validation is carried out by detecting tiny defects (small holes) in samples and the presence of minuscule perturbations (small strips of polyethylene terephthalate) in the sensing region.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave Humidity Sensor for Early Detection of Sweat and Urine Leakage

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Martín, Ferran|||0000-0002-1494-9167
A planar microwave sensor devoted to the detection of humidity in underwear and clothes in general is proposed. The ultimate goal of the sensor is to detect the presence of liquids in fabrics, which is of interest to aid patients who suffer from certain pathologies, such as hyperhidrosis and enuresis. The main target in the design of the sensor, considering the envisaged application, is simplicity. Thus, the sensor operates at a single frequency, and the working principle is the variation in the magnitude of the transmission coefficient of a matched line loaded with an open-ended quarter-wavelength sensing stub resonator. The stub, which must be in contact with the so-called fabric under test (FUT), generates a notch in the transmission coefficient with a resonance frequency that depends on the humidity level of the fabric. By designing the stub with a moderately high-quality factor, the variation in the resonance frequency causes a significant change in the magnitude level at the operating frequency, which is the resonance frequency when the sensing stub is loaded with the dry fabric, and the presence of liquid can be detected by means of an amplitude detector. A prototype device is proposed and experimentally validated. The measured change in the magnitude level by simply depositing one 50 μL drop of water in the FUT is roughly 25 dB.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Losses Assisted Sensitivity Enhancement in Reflective-Mode Phase-Variation Permittivity Sensors Based on Weakly Coupled Distributed Resonators

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This letter demonstrates that losses [including substrate losses and losses in the material under test (MUT)] can be beneficial to boost the sensitivity in one-port reflective-mode phase-variation planar permittivity sensors based on a pair of weakly coupled quarter-wavelength resonators (the sensing elements). It is shown that the key aspect of optimizing the sensitivity in the limit of small perturbations of the dielectric constant of the MUT in the vicinity of the reference dielectric constant is to achieve a high slope in the phase of the reflection coefficient at the operating frequency and the output variable. Depending on the level of losses, such phase slope can be either negative (low-loss regime) or positive (high-loss regime). Nevertheless, the relevant aspect is that, regardless of its sign, the magnitude of the phase slope can be arbitrarily high by adequately designing the sensor considering the device and MUT losses. Thus, losses do not necessarily degrade sensitivity; instead, they can be strategically utilized to achieve unprecedented sensitivities in this type of sensor, which operates based on the measurement of the reflection coefficient phase.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reflective-mode phase-variation submersible sensor for liquid characterization

  • Su, Lijuan|||0000-0002-4753-9340
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Gil Barba, Marta|||0000-0002-1106-5059
  • Martín, Ferran|||0000-0002-1494-9167
A one-port reflective-mode microwave submersible sensor based on an open-ended step-impedance microstrip line configuration, operating at a single frequency, useful for the dielectric characterization of liquids and the measurement of liquid composition in binary mixtures, is proposed in this article. The sensor constitutes two parts, namely, the microwave module, including the sensitive region, and a 3-D-printed case (made of polylactic acid-PLA), necessary for sealing, thus preventing from any liquid leakage to the nonsensing regions of the microwave module. To enhance the sensitivity, the open-ended line Section of the microwave module, i.e., the sensing region in contact with the liquid under test (LUT), is a quarter wavelength microstrip line with high impedance. Thus, the phase of the reflection coefficient is the output variable, highly dependent on the input variable-the dielectric constant of the LUT placed directly above the sensing region. In order to validate the sensing structure, a prototype device has been designed and fabricated. The average sensitivity to variations in the concentration of ethanol in solutions of deionized (DI) water is 1.22°/%, and sensor resolution is 2%. The fabricated sensor is resistant to liquid leakage, and therefore, it can be completely submerged for measuring purposes, acting as an effective measuring probe.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Synchronous Electromagnetic Encoders Based on Step-Impedance Resonators

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a new type of electromagnetic encoders based on step-impedance resonators (SIRs). The encoders consist of a linear chain of transversely oriented SIRs etched on a dielectric substrate, whereas the reader is a simple microstrip transmission line fed by a certain number of single-tone signals, i.e., three in one prototype, and four in another prototype, tuned to specific predefined frequencies. System functionality is based on detecting at which of such predefined frequencies (considering all possible combinations), each SIR of the chain resonates. Thus, the number of combinations (or states) per encoder position (or row) corresponding to the prototype fed with three single-tone signals is seven, whereas it is 15 for the prototype fed with four single-tone signals, corresponding to 2.81 and 3.91 bits, respectively, per encoder row. Although there are other synchronous electromagnetic encoders exhibiting a higher number of bits per row, the number of chains of those encoders is at least two, and the readers are complex microwave structures based on power splitters, contrary to the prototypes reported in this article. Enhancing the number of bits per row in these encoders is a fundamental aspect toward the implementation of true absolute electromagnetic encoders able to determine the position relative to the reader at any instant of time without the need to know the previous stages of encoder motion (a need in the incremental type and in the so-called quasi-absolute encoders).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Phase-Variation Microwave Displacement Sensor With Good Linearity and Application to Breath Rate Monitoring

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a novel highly linear reflective-mode displacement sensor based on planar microwave technology. The sensor consists of two parts: 1) the stator, or reader, a one-port transmission line terminated with a matched load and 2) the movable part, or tag, a dielectric slab with an electric LC (ELC) resonator etched on it. In the proposed system, the resonator is allowed to displace longitudinally along the line axis of the reader at a fixed vertical distance (air gap). Due to magnetic coupling between the line and the ELC resonator, the feeding signal (a harmonic signal tuned to the resonance frequency of the ELC resonator) is totally reflected at the resonator's position, and the phase of the reflection coefficient, the output variable of the sensor, correlates with that position, i.e., it varies roughly linearly with the distance between the resonator and the input port. A prototype example, with a dynamic range of 4.40 cm, is reported, and validated at laboratory level by means of a linear displacement system. Then, the potential of the proposed sensor to monitor the breath rate in humans is discussed, and a belt-based prototype device system that can be applied for that purpose is presented and validated. The key idea is the chest and abdomen expansion due to breathing, which leads to a periodic relative displacement between the tag and the reader at the respiration rate.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hybrid Time/Phase Domain Synchronous Electromagnetic Encoders for Near-Field Chipless-RFID and Motion Control Applications

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Synchronous electromagnetic encoder systems exploiting phase encoding to boost up the number of bits per encoder position are reported in this article. The reader is a one-port structure consisting of a transmission line terminated with a matched load and fed by a harmonic (single tone) signal. The encoders, or tags, are implemented by means of a single chain of strip resonators (inclusions) printed or etched on a dielectric substrate and oriented transversally to the chain axis. Phase encoding is achieved through the transverse position of the strips in the chain. Thus, in a reading operation, the encoder is displaced at a very short distance over the reader, in the direction orthogonal to the line axis. By this means, the resonant strips of the encoder cross the line in perfect alignment with it, significantly perturbing the reflection (and transmission) coefficient. By tuning the frequency of the feeding signal to the resonance frequency of the strips, total reflection is (roughly) expected each time a resonant strip is on top of the line. Moreover, under perfect alignment between the line and a resonant strip, the phase of the reflection coefficient depends on the distance between the inclusion (resonant strip) and the input port. Therefore, the identification (ID) associated with that inclusion can be retrieved by measuring the phase of the reflection coefficient. The number of states (and hence bits) per encoder position in the chain depends on the number of different transverse positions of the inclusions that can be resolved (16 in the prototype reported in this article). The achieved density of bits per unit length is DPL = 5.71 bit/cm and per unit surface is DPS = 0.57 bit/cm2. Nevertheless, the main relevant advantage of the proposed phase-modulated (PM) system is the fact that a single harmonic signal suffices for tag reading, contrary to other synchronous electromagnetic encoder systems based on frequency encoding, where multiple feeding harmonic signals are needed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Reflective-Mode Phase-Variation Permittivity Sensor Based on a Step-Impedance Microstrip Line Terminated With a Slot Resonator for Solid and Liquid Characterization

  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Vélez, Paris|||0000-0001-6502-5987
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article proposes a highly sensitive single-frequency microwave sensor for dielectric characterization of solids and liquids. The sensor is a reflective-mode one-port device consisting of a step-impedance microstrip line terminated with a slot resonator (the sensing element) transversely etched on the ground plane. The working principle of the sensor is the variation experienced by the phase of the reflection coefficient at the operating frequency as a consequence of changes in the dielectric properties (dielectric constant) of the material under test (MUT), either a solid or a liquid, which should be in contact with the slot resonator. A relevant advantage of the reported sensor is the fact that the MUT is located in the back substrate side of the microstrip structure. Therefore, any potential interaction between the MUT, including the mechanic holder used for liquid sensing, and the microstrip line, is prevented. A detailed sensitivity analysis that considers the effects of losses is carried out. It is concluded that, depending on the losses of the MUT, there are two different sensor operation regimes (the low-loss and the high-loss regimes), with unequal behavior, but both are useful to sensitively detect changes in the dielectric properties of the MUT. The maximum sensitivity in the prototype device devoted to the measurement of the dielectric constant in low-loss solid samples is 255.5 ∘. In the liquid sensor, equipped with a 3-D-printed holder, and focused in this article on the detection of small volume fractions of isopropanol in deionized (DI) water, the maximum sensitivity is 64.96 ∘ /%.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effects of losses on the sensitivity of reflective-mode phase-variation liquid sensors

  • Vélez, Paris|||0000-0001-6502-5987
  • Canalias, Xavier|||0009-0002-6473-7514
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Casacuberta, Pau|||0000-0002-2658-2200
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the analysis of the effects of losses on the sensitivity of reflective-mode phase-variation liquid sensors implemented by means of an open-ended (either quarter-wavelength or half-wavelength) transmission line distributed resonator (the sensing element) cascaded to a set of high/low impedance inverters (implemented by means of quarter-wavelength line sections). The device operates at a single frequency, and the working principle is the variation of the phase of the reflection coefficient (the output variable) caused by changes in the dielectric properties of the material under test (MUT), a liquid in this study. Since liquids are lossy samples, it is expected that the sensitivity of the sensor is influenced by losses, an aspect demonstrated in this article. It is shown that two operation regimes can be distinguished: 1) the low-loss regime, where the sensitivity is influenced by MUT losses, but the behavior is similar to the one of the lossless case and 2) the high-loss regime, where losses not only play a key role on the sensitivity but also modify the dependence of the output variable with the dielectric constant of the liquid under consideration compared to the lossless case. Nevertheless, contrary to general belief, with an adequate sensor design, losses might be beneficial in order to boost the sensitivity in the limit of small perturbations (this is the main contribution of this article). Validation is carried out by considering different types of oil samples and various sensing devices operating either in the low-loss regime or the high-loss regime.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Toward a low-cost portable reader for reflective-mode microwave sensors

  • Elgeziry, Mahmoud|||0000-0002-2801-2826
  • Costa, Filippo|||0000-0001-7572-2014
  • Vélez, Paris|||0000-0001-6502-5987
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Genovesi, Simone|||0000-0002-5323-1780
Microwave sensors are typically characterized using a vector network analyzer (VNA) that measures the scattering parameters of the device under test (DUT) over a wide frequency band with great accuracy. However, these features of the VNA are not always required, and its bulky form factor and high cost can even be a limitation in many practical scenarios, such as microwave sensors, which are generally characterized by low cost, a small footprint, and often planar profiles. This article presents a novel, low-cost portable reader for reflective-mode microwave sensors. The proposed device is based on a hybrid 180° directional coupler that separates the input signal from the reflected one, a voltage-controlled oscillator (VCO) to generate the input signal, and a gain/phase detector board. The performance of the proposed system has been experimentally assessed for reference load cases, showing a good match between the simulated and measured results. The capability and usefulness of the proposed device are demonstrated through the implementation of a reflective-mode distance sensor where the input impedance of the one-port sensing element is the output variable of interest. The results obtained with the proposed reader well match the VNA measurements, with a mean error of about 8%. It is worth noting that the presented solution can be easily adopted as the measurement device by other reflective-mode sensors operating in the frequency band of the coupler. Overall, the proposed novel reader offers a new approach to measuring the output variable of one-port reflective-mode microwave sensors that is battery-powered, portable, versatile, accurate, and cost-effective compared with using a VNA.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly Sensitive Coplanar Waveguide (CPW) reflective-mode phase-variation permittivity sensors based on weakly coupled Step-Impedance Resonators (SIRs)

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Muñoz Enano, Jonathan|||0000-0003-1271-3801
  • Su, Lijuan|||0000-0002-4753-9340
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a small-sized and highly sensitive planar microwave permittivity sensor based on a pair of weakly coupled step-impedance resonators (SIRs), the sensing elements. The sensor, a one-port structure, is implemented in coplanar waveguide (CPW) technology, and it operates in the reflection mode. The sensing principle is the variation in the phase of the reflection coefficient at the operating frequency, the output variable, caused by the changes in the dielectric constant of the material under test (MUT). This article demonstrates that the maximum sensitivity is inversely proportional to the square of the electric coupling coefficient between the sensing SIRs. Thus, the sensitivity can be unprecedentedly enhanced by merely separating enough the coupled SIRs (thereby reducing their mutual coupling). Since the sensing area is circumscribed to the region occupied by the square (capacitive) patches of the SIRs, it follows that the proposed sensor exhibits also a very high figure of merit ( FoM=26551∘/λ2 ), or ratio between the maximum sensitivity and the size of the sensing area expressed in terms of the squared guided wavelength, λ2.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hybrid time/phase/frequency domain linear electromagnetic encoders for displacement sensing and near-field chipless-RFID

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
Hybrid time/phase/frequency domain linear electromagnetic encoders are presented in this paper for the first time. The encoders consist of a linear chain of electric-LC (ELC) resonators etched in a dielectric substrate. Encoding is achieved by phase and frequency modulation simultaneously, namely, by considering different transverse positions and dimensions of the ELC resonators in the chain. The reader is a simple matched microstrip transmission line terminated with a matched load, and encoder reading proceeds by displacing the encoder over the reader line, at short distance, in the direction orthogonal to the line axis. When an ELC resonator lies on top of the line, the phase of the reflection coefficient at resonance depends on the distance to the input port and hence on the transverse position of the resonator in the chain (phase modulation). Moreover, the size of the resonator determines its resonance frequency (frequency modulation). This means that the reader line should be fed by as many harmonic signals as ELC resonator sizes considered, to identify the phase and the resonance frequency of the inclusion (ELC) on top of the line. In this paper, we consider 16 different transverse positions and 4 different sizes of the ELC resonators, which are read sequentially, in a time-division multiplexing scheme. Thus, 6 bits per encoder position (or row) in the chain are achieved. These encoders, with a per-unit-length density of bits of DPL = 6 bit/cm, can be applied to the implementation of synchronous near-field chipless-RFID systems with high data capacity, as well as long-range displacement sensors. In the latter case, the number of bits per encoder row can be doubled (i.e., 12 bits) by considering two chains and two readers, allowing for the discrimination of 212 (= 4096) absolute positions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Highly sensitive lossy tunable permittivity sensor

  • Casacuberta, Pau|||0000-0002-2658-2200
  • Vélez, Paris|||0000-0001-6502-5987
  • Su, Lijuan|||0000-0002-4753-9340
  • Canalias, Xavier|||0009-0002-6473-7514
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a novel lossy tunable permittivity sensor that enhances sensitivity through a controllable conductivity method using a junction field-effect transistor (JFET) in the ohmic region. The sensor, a one-port reflective-mode device, includes a coplanar waveguide (CPW) ending in a step impedance resonator (SIR) as the sensing element, with the JFET bridging the SIR patch and ground. The high sensitivity is achieved by virtue of the strong shift in the phase of the reflection coefficient at resonance experienced by varying the dielectric constant of the material under test (MUT). This device not only serves as a permittivity sensor but also for tracking variables linked to permittivity changes. Our experimental results uniquely demonstrate that sensitivity to minute perturbations can be significantly enhanced by tuning losses. The prototype, designed and constructed for detecting submillimeter proximity changes with a dielectric slab, achieves a peak sensitivity of 2291°/mm within a compact 8.5×12 -mm footprint.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Microwave Displacement Sensor With Good Linearity and Dynamic Range Based on a Microstrip Line Pair Loaded With Movable Electric-LC Resonators

  • Karami-Horestani, Amirhossein|||0000-0003-4107-8421
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Sisó, Gerard|||0000-0003-2576-6558
  • Martín, Ferran|||0000-0002-1494-9167
This article presents a linear displacement sensor exhibiting good linearity and dynamic range. The sensor consists of a pair of parallel microstrip lines both terminated with a matched load (the static part) and a pair of electric-LC (ELC) resonators tuned to different (but closely spaced) frequencies, etched in a movable substrate. By feeding the lines with harmonic signals tuned to the resonance frequencies of the ELC resonators, such signals are completely reflected back to the source provided that the ELCs are on top of the lines, coupled to them (i.e., at short distance and with adequate orientation). The phase of the reflection coefficient of each line depends on the frequency of the feeding signal as well as on the distance between the input port and the corresponding ELC resonator and repeats every half-wavelength. Thus, by displacing the ELC pair longitudinally (axially) along the line pair, the position of the ELC pair with regard to the input ports can be retrieved. The main relevant advantage of the proposed structure is that the pair of phases of the reflection coefficients (the output variable) exhibits a periodic pattern with an ELC position that repeats each time the ELC pair has displaced a distance corresponding to the minimum common multiple (MCM) of the half-wavelengths of each signal. Thus, by considering closely spaced ELC frequencies (and hence half-wavelengths), the input dynamic range can be dramatically enhanced. This idea is validated by means of two designed and fabricated prototype displacement sensors fed with harmonic signals tuned to 2.0 and 2.5 GHz in one case and tuned to 2.1 and 2.3 GHz in the other case.