Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Personalized heart rate management through data-driven dynamic exercise control

  • Sato, Takao|||0000-0003-0590-3594
  • Nishino, Tomoka
  • Kawaguchi, Natsuki
  • Mori, Hisashi
  • Uchida, Hayato
  • Murotani, Kiichiro
  • Kimura, Yuichi
  • Mizukura, Isao
  • Kobashi, Syoji
  • Arrieta Orozco, Orlando|||0000-0002-4004-8573
Maximizing healthy life expectancy is essential for enhancing well-being. Optimal exercise intensity is crucial in promoting health and ensuring safe rehabilitation. Since heart rate is related to exercise intensity, the required exercise intensity is achieved by controlling the heart rate. This study aims to control heart rate during exercise by dynamically adjusting the load on a bicycle ergometer using a proportional-integral (PI) control. The choice of PI parameters is very important because the PI parameters significantly affect the performance of heart rate control. Since the dynamic characteristics of heart rate relative to work rate vary widely from subject to subject, the PI parameters for each subject must be determined individually. In this study, PI parameters are optimized directly from exercise data using a data-driven design approach. Thus, the proposed method does not require excessive exercise of the subject to model heart rate dynamics. Using the proposed method, the heart rate can be controlled to follow a designed reference model so that the heart rate is safely increased to the desired value. The quantitative evaluation of the control results of fifteen healthy volunteers confirmed that the proposed method improved the control error of the target heart rate trajectory by approximately 40%, regardless of gender or age. In addition, it was shown that control parameters from the exercise experiment also indicate that females are more likely than males to have an elevated heart rate at the same load.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

LSTM-Based Neural Network Controllers as Drop-In Replacements for PI Controllers in a Wastewater Treatment Plant

  • Adil, Muhammad|||0000-0002-4920-3875
  • Vilanova, Ramon|||0000-0002-8035-5199
Wastewater Treatment Plants (WWTPs) rely on automatic control strategies to regulate pollutant concentrations and comply with environmental standards. Among them, Proportional Integral (PI) controllers are widely adopted for their simplicity and robustness, yet their effectiveness is limited by the nonlinear and time-varying dynamics of biological processes. In this work, Long Short-Term Memory (LSTM)-based Artificial Neural Network (ANN) PI controllers are proposed as data-driven replacements for conventional PIs in key WWTP feedback loops. Using the Benchmark Simulation Model No. 1 (BSM1), ANN controllers were trained to replicate the behavior of default nitrate and nitrite nitrogen ((Formula presented.)) and dissolved oxygen ((Formula presented.)) loops, under both time-agnostic and time-aware strategies with three- and four-input configurations. The four-input time-aware model delivered the best results, reproducing PI behavior with high accuracy (coefficient of determination, (Formula presented.)) and considerably reducing control errors. For instance, under storm influent conditions, the (Formula presented.) controller reduced the Integral of Squared Error ((Formula presented.)) and Integral of Absolute Error ((Formula presented.)) by 84.7% and 68.4%, respectively, compared with the default PI. Beyond loop-level improvements, a Transfer Learning (TL) extension was explored: the trained (Formula presented.) controller was directly applied to additional aerated reactors ((Formula presented.) and (Formula presented.)) without retraining, replacing fixed aeration and demonstrating adaptability while reducing design effort. Plant-wide evaluation with the (Formula presented.) loop and three dissolved oxygen loops ((Formula presented.) - (Formula presented.)), all controlled by LSTM-based PI controllers, under storm influent conditions, showed further reductions in the Effluent Quality Index ((Formula presented.)) and the Overall Cost Index ((Formula presented.)) by 0.84% and 1.47%, respectively, highlighting simultaneous gains in effluent quality and operational economy. Additionally, the actuator and energy analyses showed that the LSTM-based controllers produced realistic and smooth control signals, maintained consistent energy use, and ensured stable overall operation, confirming the practical feasibility of the proposed approach.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improving energy distribution in collective self-consumption via XGBoost-based allocation coefficients prediction

  • Madrigal, Sebastián|||0009-0001-9260-0876
  • Gallinad Corti, Ramon|||0009-0000-7547-9106
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
Energy communities operate under collective self-consumption schemes, where locally generated renewable energy is shared among participating members. In practice, this sharing is commonly governed by static allocation coefficients fixed in advance, which do not capture the time-varying and heterogeneous demand of participants. This mismatch can reduce community self-consumption, increase surplus injections, and raise reliance on the grid. This paper proposes a data-driven framework to dynamically compute allocation coefficients based on predicted individual demand and demonstrates its application in a municipal energy community in Catalonia, Spain. The approach uses an extreme gradient boosting model to forecast hourly consumption profiles and then derive adaptive allocation coefficients that better align shared photovoltaic generation with expected demand. The proposed strategy is evaluated against a static baseline and alternative dynamic schemes using multiple performance indicators, including community self-consumption, surplus energy, and grid dependency. In the case study, the extreme gradient boosting-based allocation increases community self-consumption by 8.4%, reduces surplus energy by 34%, and lowers grid dependency by up to 30% for key members, resulting in a more balanced and efficient distribution of locally generated energy. These results highlight the potential of machine learning-enabled allocation to improve collective self-consumption performance in the existing regulatory framework.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Physics-informed Bayesian angle-of-arrival estimation for commercial off-the-shelf RFID with sub-degree accuracy

  • Benelmeki, Nedal M.|||0009-0003-1955-5006
  • Morell, Antoni|||0000-0003-2249-8594
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
  • Lopez Vicario, Jose|||0000-0002-3574-4697
Accurate angle-of-arrival (AoA) estimation with passive Ultra High Frequency (UHF) Radio-Frequency Identification (RFID) is a challenging task in realistic indoor settings due to multipath, phase ambiguity, and hardware-induced bias. In this work, we propose a physics-informed Bayesian sensor-fusion framework that treats AoA as a latent variable in a regression model. Classical array-processing estimates are incorporated as noisy physics-based observations and fused with feature-based regression, achieving calibrated uncertainty. The approach is validated with a fully commercial off-the-shelf (COTS) RFID system in an office environment. The best configuration obtains sub-degree accuracy, with root mean square error (RMSE) of 0.4993∘ and a mean absolute error (MAE) of 0.3699∘, while also providing posterior predictive intervals that quantify confidence at inference time. These results demonstrate that combining lightweight physics models with Bayesian learning delivers reliable, accessible, and reproducible AoA estimation in multipath-rich environments using low-cost hardware.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

RFID-based Soil Moisture Sensor for Smart Agriculture, a Gaussian Mixture Model Approach

  • Benelmeki, Nedal M.|||0009-0003-1955-5006
  • Diaz Machado, Elvis|||0000-0002-6583-8547
  • del Rio Toledano, Javier
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
In this work, we present an RFID-based indirect soil moisture sensor based on the application of Machine Learning. More specifically, we suggest an unsupervised approach that does not require information about the real height and moisture levels. This approach can be of great interest in practical agricultural deployments, where the careful deployment of tags at specific depths within the soil is challenging. It allows an estimation of the posterior probability of moisture, based on the available Received Signal Strength Indicator (RSSI) and phase. The suggested method enables the RFID system to operate as a sensor by probabilistically quantifying measurement uncertainty, which is a key distinction from existing ethodologies. In this paper, we focus on two differentiated moisture cases to show the validity of our approach. Future research will extend the proposed methodology to a wider set of moisture levels.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Detección Robusta de Tags RFID usando Hidden Markov Models

  • del Rio Toledano, Javier
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
Hidden Markov Models (HMMs) have proven to be powerful tools for modeling sequential data across various applications. This paper explores their use in RFID-based tag detection, focusing on improving accuracy and robustness in environments affected by signal noise and interference. We propose a methodology that leverages the probabilistic nature of HMMs to classify and predict RFID tag readings, thereby enhancing detection reliability. The effectiveness of the approach is evaluated through simulations, demonstrating its potential for improving modern RFID reader performance. Our results indicate that HMMs can significantly improve detection precision, providing a more reliable solution for RFID applications. Additionally, we analyze the impact of model parameters and propose optimizations to enhance performance in dynamic scenarios. This research is a first step towards improved RFID systems by integrating probabilistic model.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Preliminary Study on RFID Signal Characteristics Above Water using Probabilistic Modeling with Sparse Gaussian Processes

  • Diaz Machado, Elvis|||0000-0002-6583-8547
  • Benelmeki, Nedal M.|||0009-0003-1955-5006
  • del Rio Toledano, Javier
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
This paper presents a preliminary investigation into the relationship between UHF RFID signal characteristics (Received Signal Strength Indicator- RSSI, and phase) and the vertical distance between the reader antenna and a water surface. Due to experimental constraints preventing direct soil moisture measurement, the study was adapted to use a 50liter container filled with water, varying the reader height and transmission power. Initial manual data inspection revealed an apparent linear relationship between the signal phase and reader height, as well as between phase and the volume of water added (affecting water level). We outline the modified experimental methodology and propose the use of Feedforward Neural Networks (FFNN) for baseline modeling and Sparse Gaussian Process Regression (SGPR) to model the observed relationships and quantify measurement uncertainties efficiently. This work serves as a foundational step towards developing robust RFID-based moisture sensing techniques, providing a methodology for controlled experimentation and data analysis using scalable probabilistic machine learning models.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

HABITAS, Home agent-based individualized time and activity simulator for household energy dynamics in smart homes

  • Gallinad Corti, Ramon|||0009-0000-7547-9106
  • Madrigal, Sebastián|||0009-0001-9260-0876
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
  • Meneses, Montse|||0000-0002-5846-2676
  • Vilanova, Ramon|||0000-0002-8035-5199
The rise of IoT devices and smart technologies has transformed homes into complex interconnected environments, creating new challenges for energy management. Understanding how people actually use energy is now a key requirement for designing smarter, more efficient systems, and simulation provides a controlled way to test decisions before deploying them in real homes. However, traditional simulation tools rely on static occupancy profiles and deterministic models that overlook the variability of real household behavior. This paper introduces Home Agent-Based Individualized Time and Activity Simulator (HABITAS), a flexible agent-based framework capable of emulating diverse household scenarios and testing energy optimization strategies. HABITAS represents occupants as autonomous agents with unique routines, preferences, and needs, enabling realistic modeling of energy and resource use. The simulator integrates solar generation, battery storage, appliance use, water consumption, and environmental monitoring through a modular architecture that supports both real-time and fast-forward simulation. Through detailed simulations, HABITAS generated plausible residential load shapes and variability patterns consistent with behavioral expectations, illustrating its practical applicability. Its detailed, individualized outputs support research in demand response, energy policy, smart home design, and decentralized energy systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transfer Learning in wastewater treatment plants control, Measuring the transfer suitability

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Vilanova, Ramon|||0000-0002-8035-5199
The industrial sector is nowadays experiencing a digital transformation motivated by the Industry 4.0 paradigm. Concepts such as data-driven models, Artificial Neural Networks (ANNs), and Transfer Learning (TL) are part of the current vocabulary in the industrial management and control topics. For that reason, in this paper the application of TL techniques is proposed to derive new ANN-based control structures from pre-existing ones. Notice that if an ANN-based controller is transferred into a new industrial environment, its appropriate behaviour must be ensured, and what it is more important, this must be known a priori. Nevertheless, TL techniques do not always ensure this. That is why the Transfer Suitability Metric (TSM) is proposed here. Determining the similarity among environments, this metric tells if the controller can be transferred, transferred with certain limitations, or if it cannot be transferred at all. Here, the metric is applied over a Wastewater Treatment Plant (WWTP). The objective is to derive the control structure of one control loop, let us say the Dissolved Oxygen (DO), and then transfer it into another basic control loop in a WWTP, the Nitrate-nitrogen (NO), and vice-versa. Results show that with the help of the TSM, an improvement around a 68.54% and 80.53% in the Integrated Absolute Error (IAE) and the Integrated Squared Error (ISE) is obtained in the NO management, respectively. Moreover, a simplification and speed-up of the controller design process is achieved.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Model-Based Optimization Approach for PID Control of Pitch-Roll UAV Orientation

  • Arrieta Orozco, Orlando|||0000-0002-4004-8573
  • Campos, Daniel|||0000-0003-1982-3288
  • Rico-Azagra, Javier|||0000-0002-5500-6093
  • Gil-Martínez, Montserrat|||0000-0002-6547-5301
  • Rojas, José David|||0000-0003-1176-9061
  • Vilanova, Ramon|||0000-0002-8035-5199
This study focuses on the modeling and control optimization of the pitch-roll angles orientation in a quad-rotor UAV (unmanned aerial vehicle) drone system. To address the control challenge, PID (proportional-integral-derivative) controllers are used, which have been tuned through a model-based optimization approach. A non-linear model of the system is obtained and further validated experimentally. The model is implemented in Simulink to conduct model-based optimization. The controller design uses an IMC (internal model control) model-based approach to establish the initial parameters for a PID controller. In the subsequent design phase, a multiobjective approach is taken, incorporating weighted cost functions that account for IAE (integral absolute error) and ITAE (integral of time-weighted absolute error) forms, along with battery usage. The outcomes of this design are showcased through simulations and real-world platform testing.