Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Comparative study of iron and trace element mobilization during Fe-Oxide bioreduction in mine tailings, a case study of Ensenada Chapaco (Chile) and Portman Bay (Spain)

  • Benaiges-Fernandez, Robert|||0000-0003-4691-8290
  • Palau, Jordi|||0000-0001-9492-7306
  • Urmeneta, Jordi|||0000-0001-9779-0552
  • Soler, Josep M.|||0000-0003-0741-249X
  • Cama, Jordi|||0000-0002-8949-3088
  • Dold, Bernhard
Bioreduction of Fe-oxides in mine tailings deposited under marine conditions releases Fe and associated trace elements (e.g., Ti, Ni, Cd, Pb), leading to contamination of the marine environment. Sea-tailings disposal (STD) along the northern coast of Chile (Ensenada Chapaco) and along the eastern coast of Spain (Portman Bay) results in an adverse impact on the environment. This paper focuses on bioreduction under marine conditions. To this end, two column experiments were carried out with samples from Portman Bay and Ensenada Chapaco. Lactate (i.e., organic matter source) was supplied during the experiments. The results obtained are compared with those from batch experiments performed under similar conditions. In the column filled with Portman Bay tailings, the high content of magnetite (15 wt%) in contact with water gives rise to a large magnetite surface area and abundant Fe(III), which results in a high release of Fe(II) and trace metals (TE). Since Fe(II) adsorbs onto the magnetite surface reducing the availability of Fe(III), the magnetite bioreduction and the consequent TE release decrease after 2000 h. By contrast, the magnetite bioreduction lasts longer (3000 h) in the column with Ensenada Chapaco tailings. This is because a lower magnetite content in the tailings (1 wt%) provides a smaller reactive surface area yielding less Fe(III). Consequently, the concentrations of Fe(II) and TE in the output solutions are lower, which slows down the Fe(II) adsorption onto magnetite. This results in a a longer magnetite bioreduction. Bioreduction is regulated by the availability of Fe(III) in both columns. It is inferred that the bioreduction rate diminishes as a function of time and increases as a function of soluble Fe(II) concentration. Moreover, the concentrations of TE released from the two bioreduced tailings exceed the elemental concentrations under marine conditions., Bioreduction of Fe-oxides in mine tailings deposited under marine conditionsreleases Fe and associated trace elements (e.g., Ti, Ni, Cd, Pb), leading tocontamination of the marine environment. Sea-tailings disposal (STD) along thenorthern coast of Chile (Ensenada Chapaco) and along the eastern coast of Spain(Portman Bay) results in an adverse impact on the environment. This paper focuseson bioreduction under marine conditions. To this end, two column experiments werecarried out with samples from Portman Bay and Ensenada Chapaco. Lactate (i.e.,organic matter source) was supplied during the experiments. The results obtainedare compared with those from batch experiments performed under similarconditions. In the column filled with Portman Bay tailings, the high content of magnetite(15 wt%) in contact with water gives rise to a large magnetite surface area andabundant Fe(III), which results in a high release of Fe(II) and trace metals (TE). SinceFe(II) adsorbs onto the magnetite surface reducing the availability of Fe(III), themagnetite bioreduction and the consequent TE release decrease after 2000 h. Bycontrast, the magnetite bioreduction lasts longer (3000 h) in the column withEnsenada Chapaco tailings. This is because a lower magnetite content in the tailings(1 wt%) provides a smaller reactive surface area yielding less Fe(III). Consequently,the concentrations of Fe(II) and TE in the output solutions are lower, which slowsdown the Fe(II) adsorption onto magnetite. This results in a a longer magnetitebioreduction. Bioreduction is regulated by the availability of Fe(III) in both columns. It is inferred that the bioreduction rate diminishes as a function of time andincreases as a function of soluble Fe(II) concentration. Moreover, the concentrationsof TE released from the two bioreduced tailings exceed the elemental concentrationsunder marine conditions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Multi-isotopic evaluation of hydraulic barriers and water rights in mine tailing impoundments with altitude-offset water sources

  • Navarro-Ciurana, Dídac|||0000-0001-7457-3387
  • Culí, Laura|||0000-0002-4652-207X
  • Torrentó, Clara|||0000-0003-1480-2744
  • Otero, Neus|||0000-0001-6553-7958
  • Iturra, Nicolás
  • Soler Gil, Albert|||0000-0003-3140-182X
Sustainable water management in porphyry copper tailings storage facilities (TSFs) is essential for environmental protection and regulatory compliance, particularly in Chile, which ranks third globally in TSF numbers. This study applies a multi-isotope framework (δ2H-H2O, δ18O-H2O, δ34S-SO42- and δ18O-SO42-) to trace the fate of tailings seepage towards groundwater and to evaluate hydraulic barriers effectiveness in porphyry Cu TSFs, demonstrating its applicability to systems characterized by complex mixing of multiple water sources with contrasting recharge conditions. Unlike previous studies where water sources shared similar recharge altitudes, this work addresses an "altitude-offset" scenario in which tailings water originates from high-altitude recharge zones while downstream aquifers are located at much lower elevations, creating additional isotopic end-members. To illustrate the usefulness of this approach, the Carén TSF (Chile) serves as case study. Isotopic data indicate that tailings waters are strongly evaporated, enriched in elevated SO42- concentrations on the order of thousands of mg L-1 (≈2,000 mg L-1), mainly derived from sulfide ore oxidation (60-80 %), and recharged at high altitude (∼2,000 masl). In contrast, surrounding freshwater is recharged at lower altitude (∼220 masl) and shows significantly lower SO42- concentrations on the order of tens of mg L-1 (≈20 mg L-1). Groundwater downstream of the TSF reflects variable mixing between these sources. Using Cl-/SO42-, δ2H-H2O/δ18O-H2O, δ34S-SO42-/δ18O-SO42-, δ34S-SO42-/ln(SO42-) mixing models, the contribution of mine tailing water was quantified to be generally lower than 20% but reaching 30-40% in some groundwater samples located close to the TSF. In addition, δ34S-SO42- and δ18O-SO42- results suggest that bacterial sulfate reduction may occur in deeper zones of the TSF, promoting natural attenuation of dissolved metals. These findings highlight the usefulness of stable isotopes for tracing water sources, assessing hydraulic barrier efficiency, and estimating the proportion of pumped water exempt from water rights in TSFs.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dual C-Cl isotope fractionation offers potential to assess biodegradation of 1,2-dichloropropane and 1,2,3-trichloropropane by Dehalogenimonas cultures

  • Trueba-Santiso, Alba|||0000-0001-9730-7321
  • Torrentó, Clara|||0000-0003-1480-2744
  • Soder-Walz, Jesica M.|||0000-0002-5253-9898
  • Fernández-Verdejo, David|||0000-0002-3234-4006
  • Rosell, Mònica|||0000-0003-1563-8595
  • Marco-Urrea, Ernest|||0000-0002-8033-6553
1,2-dichloropropane (1,2-DCP) and 1,2,3-trichloropropane (1,2,3-TCP) are hazardous chemicals frequently detected in groundwater near agricultural zones due to their historical use in chlorinated fumigant formulations. In this study, we show that the organohalide-respiring bacterium Dehalogenimonas alkenigignens strain BRE15 M can grow during the dihaloelimination of 1,2-DCP and 1,2,3-TCP to propene and allyl chloride, respectively. Our work also provides the first application of dual isotope approach to investigate the anaerobic reductive dechlorination of 1,2-DCP and 1,2,3-TCP. Stable carbon and chlorine isotope fractionation values for 1,2-DCP (ƐC = -13.6 ± 1.4 ‰ and ƐCl = -27.4 ± 5.2 ‰) and 1,2,3-TCP (ƐC = -3.8 ± 0.6 ‰ and ƐCl = -0.8 ± 0.5 ‰) were obtained resulting in distinct dual isotope slopes (Λ12DCP = 0.5 ± 0.1, Λ123TCP = 4 ± 2). However direct comparison of ΛC-Cl among different substrates is not possible and investigation of the C and Cl apparent kinetic isotope effects lead to the hypothesis that concerted dichloroelimination mechanism is more likely for both compounds. In fact, whole cell activity assays using cells suspensions of the Dehalogenimonas-containing culture grown with 1,2-DCP and methyl viologen as electron donor suggest that the same set of reductive dehalogenases was involved in the transformation of 1,2-DCP and 1,2,3-TCP. This study opens the door to the application of isotope techniques for evaluating biodegradation of 1,2-DCP and 1,2,3-TCP, which often co-occur in groundwaters near agricultural fields.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A MATLAB approach for developing digital rock models of heterogeneous limestones for reactive transport modeling

  • Vafaie, Atefeh|||0000-0003-0104-5377
  • Cama, Jordi|||0000-0002-8949-3088
  • Kivi, Iman R.|||0000-0002-7150-0411
  • Vilarrasa, Victor|||0000-0003-1169-4469
  • Soler, Josep M.|||0000-0003-0741-249X
Porosity is a key parameter controlling the physico-chemical behavior of porous rocks. Digital rock physics offers a unique technique for imaging the inherently heterogeneous rock microstructure at fine spatial resolutions and its computational reconstruction, through which a better understanding and prediction of the rock behavior can be achieved. In this study, we propose a simple but accurate method to build a 3D porosity map of centimeter-scale carbonate rock cores from X-ray Micro Computed Tomography (XMCT) imaging data. The method consists of 3 main steps: i) decomposition of 3D volumetric XMCT data into sub-volumes, ii) processing of equidistributed 2D cross-section images in each sub-volume and iii) 2D slice-by-slice calculation of porosity and its assembly to reconstruct a 3D continuum porosity map over the whole core domain using a MATLAB code. The proposed approach significantly conserves the required memory to manipulate large image datasets. The digitized porosity representations are used to build 3D permeability maps of the cores by applying an explicit permeability-porosity relationship. The permeability maps are used as input for numerical simulation of the rock response to the percolation of reactive fluids through which the general validity of the approach is verified. The developed digital rock model paves the way for an improved understanding of reactive transport in carbonate rocks.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Divergent dual C-H isotopic fractionation pattern during anaerobic biodegradation of toluene within Aromatoleum species under nitrate-reducing conditions

  • Pinel Cabello, Maria|||0000-0003-0792-9114
  • Wasmund, Kenneth|||0000-0001-6706-7291
  • Soder-Walz, Jesica M.|||0000-0002-5253-9898
  • Vega Paredes, Maria|||0000-0003-1936-8051
  • Rosell, Mònica|||0000-0003-1563-8595
  • Marco-Urrea, Ernest|||0000-0002-8033-6553
Toluene is a pollutant frequently detected in contaminated groundwater, mostly due to leakage from underground gasoline storage tanks and pipeline ruptures. Multi-element compound-specific isotope analysis provides a framework to understand transformation processes and design efficient remediation strategies. In this study, we enriched an anaerobic bacterial culture derived from a BTEX-contaminated aquifer that couples toluene and phenol oxidation with nitrate reduction and the concomitant production of carbon dioxide and biomass. The 16S rRNA gene amplicon data indicated that the toluene-degrading consortium was dominated by an Aromatoleum population (87 ± 2 % relative abundance), and metagenome sequencing confirmed that the genome of this Aromatoleum sp. encoded glycyl-radical enzyme benzylsuccinate synthase (BssABC) and phenylphospate synthase (PpsA1BC) homologous genes involved in the first step of toluene and phenol transformation, respectively. Carbon and hydrogen isotopic fractionation were εbulk, C = - 3.5 ± 0.6 ‰ and εrp, H = - 85 ± 11 ‰, respectively, leading to a dual C-H isotope slope of ΛH/C = 26 ± 2. This value fits with a previously reported value for a consortium dominated by an Azoarcus species (ΛH/C = 19 ± 5) but differs from that reported for Aromatoleum aromaticum (ΛH/C = 14 ± 1), both of which grow with toluene under nitrate-reducing conditions. Overall, this suggests the existence of different BssABC enzymes with different mechanistic motifs even within the same Aromatoleum genus.