RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication
Artículo científico (JournalArticle)
Perovskite/Perovskite Tandem Solar Cells in the Substrate Configuration with Potential for Bifacial Operation
[EN] Perovskite/perovskite tandem solar cells have
recently exceeded the record power conversion efficiency
(PCE) of single-junction perovskite solar cells. They are
typically built in the superstrate configuration, in which the
device is illuminated from the substrate side. This limits the
fabrication of the solar cell to transparent substrates, typically
glass coated with a transparent conductive oxide (TCO), and
adds constraints because the first subcell that is deposited on
the substrate must contain the wide-bandgap perovskite.
However, devices in the substrate configuration could
potentially be fabricated on a large variety of opaque and
inexpensive substrates, such as plastic and metal foils. Importantly, in the substrate configuration the narrow-bandgap subcell
is deposited first, which allows for more freedom in the device design. In this work, we report perovskite/perovskite tandem
solar cells fabricated in the substrate configuration. As the substrate we use TCO-coated glass on which a solution-processed
narrow-bandgap perovskite solar cell is deposited. All of the other layers are then processed using vacuum sublimation,
starting with the charge recombination layers, then the wide-bandgap perovskite subcell, and finishing with the transparent top
TCO electrode. Proof-of-concept tandem solar cells show a maximum PCE of 20%, which is still moderate compared to those
of best-in-class devices realized in the superstrate configuration yet higher than those of the corresponding single-junction
devices in the substrate configuration. As both the top and bottom electrodes are semitransparent, these devices also have the
potential to be used as bifacial tandem solar cells., The research leading to these results received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (Grant Agreement 834431). The authors acknowledge support from the Comunitat Valenciana: H.J.B. and M.A.H.-F. for Projects IDIFEDER/2018/061 and PROME-TEU/2020/077; A.P. for Grant GRISOLIAP/2020/134; K.P.S.Z. for Grant APOSTD/2021/368; C.R.-C. for Project CIDEGENT/2020/046; M.S. for Project CISEJI/2022/43. The authors also acknowledge support by the Ministry of Science and Innovation (MCIN) and the Spanish State Research Agency (AEI): Project PCI2019-111829-2 funded by MCIN/AEI/10.13039/501100011033 and by the European Union; Project CEX2019-000919-M funded by MCIN/AEI/10.13039/501100011033; L.G.-E. for Grant IJC2019-039851-I funded by MCIN/AEI/10.13039/501100011033; M.S. for Grant RYC-2016-21316 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in Your Future". This work was also supported by the JST-Mirai Program (JPMJMI22E2), NEDO, the International Collaborative Research Program of ICR, Kyoto University, a Grant-in-Aid for Scientific Research (A) (21H04699), JSPS (Research Fellowship for Young Scientists 21J14762), and the Chinese Scholarship Council (CSC).
Project:
Agencia Estatal de Investigación / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PCI2019-111829-2
,
European Commission / H2020 834431
,
Generalitat Valenciana iDiFEDER/2018/061
,
Generalitat Valenciana GRISOLIAP/2020/134
,
Generalitat Valenciana PROMETEO/2020/077
,
Generalitat Valenciana APOSTD/2021/368
,
Generalitat Valenciana CIDEGENT/2020/046
,
Japan Society for the Promotion of Science 21J14762
,
New Energy and Industrial Technology Development Organization JPMJMI22E2
,
Japón CEX2019-000919-M
,
Ministerio de Ciencia e Innovación RYC-2016-21316
,
Ministerio de Ciencia e Innovación 21H04699