Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Preparation and Characterization of Electrospun Pectin-Based Films and Their Application in Sustainable Aroma Barrier Multilayer Packaging

  • Balik, Busra Akinalan
  • Argin, Sanem
  • Lagaron, Jose M.
  • Torres-Giner, Sergio|||0000-0001-9071-9542
[EN] Featured Application: The present study aims to develop novel pectin-based films by electrospinning. The here -prepared films were applied as aroma barrier interlayers between two biopolymer films to develop fully bio-based and biodegradable food packaging articles according to the principles of the Circular Economy. Pectin was first dissolved in distilled water and blended with low contents of polyethylene oxide 2000 (PEO2000) as the carrier polymer to produce electrospun fibers. The electrospinning of the water solution of pectin at 9.5 wt% containing 0.5 wt% PEO2000 was selected as it successfully resulted in continuous and non-defected ultrathin fibers with the highest pectin content. However, annealing of the resultant pectin-based fibers, tested at different conditions, developed films with low mechanical integrity, high porosity, and also dark color due to their poor thermal stability. Then, to improve the film-forming process of the electrospun mats, two plasticizers, namely glycerol and polyethylene glycol 900 (PEG(900)), were added to the selected pectin solution in the 2-3 wt% range. The optimal annealing conditions were found at 150 degrees C with a pressure of 12 kN load for 1 min when applied to the electrospun pectin mats containing 5 wt% PEO2000 and 30 wt% glycerol and washed previously with dichloromethane. This process led to completely homogenous films with low porosity and high transparency due to a phenomenon of fibers coalescence. Finally, the selected electrospun pectin-based film was applied as an interlayer between two external layers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by the electrospinning coating technology and the whole structure was annealed to produce a fully bio-based and biodegradable multilayer film with enhanced barrier performance to water vapor and limonene., This study was supported by the Turkish Scientific and Technological Research Council (TUBITAK) 2214-A International Research Fellowship Programme for PhD Students and by the Spanish Ministry of Science, Innovation, and Universities (MICIU) project numbers AGL2015-63855-C2-1-R. S.T.-G. is a recipient of a Juan de la Cierva¿Incorporación contract (IJCI-2016-29675) from MICIU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antibacterial Activity of Linezolid against Gram-Negative Bacteria: Utilization of E-Poly-l-Lysine Capped Silica Xerogel as an Activating Carrier

  • Guzel Kaya, Gulcihan
  • Tormo-Mas, María Ángeles
  • Deveci, Huseyin
  • Medaglia, Serena|||0000-0003-3537-9842
  • Candela-Noguera, Vicente
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] In recent times, many approaches have been developed against drug resistant Gram-negative bacteria. However, low-cost high effective materials which could broaden the spectrum of antibiotics are still needed. In this study, enhancement of linezolid spectrum, normally active against Gram-positive bacteria, was aimed for Gram-negative bacteria growth inhibition. For this purpose, a silica xerogel prepared from a low-cost precursor is used as a drug carrier owing to the advantages of its mesoporous structure, suitable pore and particle size and ultralow density. The silica xerogel is loaded with linezolid and capped with epsilon-poly-l-lysine. The developed nano-formulation shows a marked antibacterial activity against to Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus. In comparison to free linezolid and epsilon-poly-l-lysine, the material demonstrates a synergistic effect on killing for the three tested bacteria. The results show that silica xerogels can be used as a potential drug carrier and activity enhancer. This strategy could provide the improvement of antibacterial activity spectrum of antibacterial agents like linezolid and could represent a powerful alternative to overcome antibiotic resistance in a near future., We thank the Spanish Government (projects RTI2018-100910-B-C41, RTI2018-101599-B-C22-AR and SAF2017-82251-R (MCUI/AEI/FEDER, UE)) and the Generalitat Valenciana (project PROMETEO/2018/024) for support. G.G.K. would like to thank Academic Staff Training Program (2016-OYP-071) and TUBITAK for 2214-A International Research Fellowship Program for PhD Students. S.M. thanks Generalitat Valenciana for her Santiago Grisolia fellowship. V.C.-N. thanks Spanish Ministerio de Educacion for his FPU grant (FPU15/02753).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Band alignment of PCN-222 via selection of the metal porphyrin linker for sunlight driven photocatalytic overall water splitting

  • Semerci, Tugce Gunay
  • Mutlu, Yasemin Cimen
  • Melillo, Arianna
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Simulated sunlight driven overall water splitting has been carried out using porphyrin-based PCN-222 metalorganic frameworks having none or Zn, Fe, Mn and Co metal ion at the porphyrin linker. Influence of the transition metal on the photocatalytic water splitting reaction was systematically studied filling the existing gap. Under simulated sunlight irradiation, PCN-222(Zn) shows the highest H2 evolution reaction (HER) efficiency, reaching almost 1.5 mmol of H2 per gram of photocatalyst by using MeOH, which corresponds to the HER rate of 65.8 & mu;mol g-1 h-1 that is higher than some examples of porphyrinic MOFs with Pt. In addition to this, as the valence band (VB) levels of PCN-222(M) gets more positive than that of water oxidation potential, O2 evolution was detected in a quasi stoichiometric ratio respect to H2. To gain insights into the mechanism of the H2 and O2 evolution, transient absorption (TA) spectroscopy measurements were carried out, providing a strong evidence of the generation of a charge separated state and that the positive holes are able to oxidize H2O in the microsecond time. This study not only provides new insights for overall water splitting applications of porphyrin-based MOFs without using noble metal co-catalysts, but also shed light on future experiments for construct sustainable photocatalysts for important yet thermodynamically uphill reactions., T. G. S. gratefully acknowledges support from the Scientific and Technological Research Council of Turkey (TUBITAK) BIDEB-2214-A International Doctoral Research Fellowship Programme. This paper is the part of the PhD thesis prepared by T. G. S., which was supported also by Eskisehir Technical University Scientific Research Projects (BAP) (Project Number: 1705F314).