Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 49
Encontrada(s) 1 página(s)

Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publication Artículo científico (JournalArticle)

Stable antiferromagnetic nanocrystals for room temperature applications: The case of iron nitride

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ordered vacancy network induced by the growth of epitaxial graphene on Pt(111)

  • Otero, Gonzalo
  • González, Carlos
  • Pinardi, Anna Lisa
  • Merino, Pablo
  • Blanco-Rey, María
  • Méndez, Javier
  • Andrés, Pedro L. de
  • Martín-Gago, José A.
We have studied large areas of (3×3)R30° graphene commensurate with a Pt(111) substrate. A combination of experimental techniques with ab initio density functional theory indicates that this structure is related to a reconstruction at the Pt surface, consisting of an ordered vacancy network formed in the outermost Pt layer and a graphene layer covalently bound to the Pt substrate. The formation of this reconstruction is enhanced if low temperatures and polycyclic aromatic hydrocarbons are used as molecular precursors for epitaxial growth of the graphene layers, We acknowledge financial support from MAT2008- 1497 and CSD2007-41 (Spain), and the 7th Framework Program (FP7/2007-2013) (EU). C.G. acknowledge CSIC "JAE-Doc" and P.M. INTA "Rafael Calvo Rodes"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetism in nanometer-thick magnetite

  • Monti, Matteo
  • Santos, B.
  • Mascaraque, Arantzazu
  • Marco, J.F.
  • de la Figuera, Juan
PACS number(s): 75.70.−i, 75.47.Lx, 68.37.Nq, 78.20.Ls.-- et al., The oldest known magnetic material, magnetite, is of current interest for use in spintronics as a thin film. An open question is how thin can magnetite films be and still retain the robust ferrimagnetism required for many applications. We have grown 1-nm-thick magnetite crystals and characterized them in situ by electron and photoelectron microscopies including selected-area x-ray circular dichroism. Well-defined magnetic patterns are observed in individual nanocrystals up to at least 520 K, establishing the retention of ferrimagnetism in magnetite two unit cells thick., This researchwas supported by the Spanish Ministry of Science and Innovation through Projects No. MAT2009-14578-C03-01, MAT2009-14578-C03-02 and MAT2010-21156-C03-02, by the Office of Basic Energy Sciences, Division of Materials and Engineering Sciences, US Department of Energy under Contract No. DE-AC04-94AL85000, and by the European Union through 226716-ELISA. M. M. and B. S. thank the Spanish Ministry of Science and Innovation for supporting them through FPI fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valence change of praseodymium in Pr0.5Ca0.5CoO3 investigated by x-ray absorption spectroscopy

  • Herrero Martín, Javier
  • García Muñoz, Josep Lluís
  • Frontera, Carlos
  • Blasco, Javier
  • Barón González, Aura J.
  • Subías, Gloria
6 páginas, 4 figuras.-- PACS number(s): 71.30.+h, 78.70.Dm, 75.30.Wx, 75.25.Dk.-- et al., X-ray absorption spectroscopy measurements in Pr0.5Ca0.5CoO3 were performed at the Pr M4,5, Pr L3, and Ca L2,3 absorption edges as a function of temperature below 300 K. Ca spectra show no changes down to 10 K while a noticeable thermally dependent evolution takes place at the Pr edges across the metal-insulator transition. Spectral changes are analyzed by different methods, including multiple scattering simulations, which provide quantitative details on an electron loss at Pr 4f orbitals. We conclude that in the insulating phase a fraction [15(±5)%] of Pr3+ undergoes a further oxidation to adopt a hybridized configuration composed of an admixture of atomiclike 4f1 states (Pr4+) and f-symmetry states on the O 2p valence band (Pr3+L̲ states) indicative of a strong 4f-2p interaction., We acknowledge financial support from MICINN (Spanish government) under Projects No. MAT2009-09308 and Nanoselect Project No. CSD2007-00041. We acknowledge ILL (and the CRG-D1B), and HZB for the provision of beam time. The ALICE diffractometer is funded through the BMBF under Contract No. 05KS7PC1. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 226716. J.H.M. thanks CSIC for JAEdoc contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Valence transition in (Pr,Ca)CoO3 cobaltites: Charge migration at the metal-insulator transition

  • García Muñoz, Josep Lluís
  • Frontera, Carlos
  • Barón González, Aura J.
  • Blasco, Javier
6 páginas, 5 figuras, 1 tabla.-- PACS number(s): 71.30.+h, 75.25.Dk, 75.30.Wx, 78.70.Dm.-- et al., X-ray absorption spectroscopy measurements in Pr0.5Ca0.5CoO3 and (Pr,Y)0.55Ca0.45CoO3 compositions reveal that the valence of praseodymium ions is stable and essentially +3 (Pr [4f2]) in the metallic state, but abruptly changes when carriers localize approaching the oxidation state +4 (Pr [4f1]). This mechanism appears to be the driving force of the metal-insulator transition. The ground insulating state of Pr0.5Ca0.5CoO3 is a homogeneous Co3.5-δ state stabilized by a charge transfer from Pr to Co sites: 1/2Pr3++Co3.5→1/2Pr3+2δ+Co3.5-δ, with 2δ ≈ 0.26e-., Financial support from MICINN (Spanish government) under Projects No. MAT2006-11080-C02-02 and No. MAT2009-09308, and NANOSELECT under Project No. CSD2007-00041 is acknowledged. The ALICE diffractometer is funded through the BMBF under Contract No. 05KS7PC1. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. 226716, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spectroscopic characterization of solvent-mediated folding in dicarboxylate dianions

  • Wende, Torsten
  • Wanko, Marius
  • Jiang, Ling
  • Meijer, Gerard
  • Asmis, Knut R.
  • Rubio, Angel
4 páginas, 3 figuras, 1 tabla., The relationship between conformational changes of suberate dianions in water clusters and the corresponding spectroscopic characteristics were studied theoretically and by IR spectroscopy (see picture for the charge displacement associated with the excitation of the carboxylate symmetric stretching modes). Folded structures are stabilized by the formation of additional hydrogen bonds between the solvated dianion and H2O molecules and should thus be retained in larger, microhydrated clusters., This research is funded by the European Community’s Seventh Framework Programme (FP7/2007-2013, grant nr. 226716), the Spanish MEC (FIS2007-65702-C02-01), the “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07), and CIC NanoGUNE (grant no. CSD2006-53). L.J. thanks the Alexander von Humboldt Foundation for a postdoctoral scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A combined photoemission and ab initio study of the electronic structure of (6,4)/(6,5) enriched single wall carbon nanotubes

  • Blauwe, Katrien D.
  • Shiozawa, H.
  • Mowbray, Duncan J.
  • Rubio, Angel
  • Hofmann, Ph.
  • Pichler, Thomas
5 páginas, 3 figuras., Due to the growing number of applications of small diameter single wall carbon nanotubes (SWCNTs) in opto-electronics and biological imaging, there is a strong need for a better understanding of their electronic properties. Because (6,5) tubes with a diameter of 0.75 nm are currently the strongest enriched in the CoMoCat synthesis process, they are one of the most studied carbon nanotubes. However, there is still a lack of knowledge on the electronic properties of these tubes. In this paper, we report on a detailed analysis of the electronic structure of (6,4)/(6,5) enriched nanotubes with a combined experimental and theoretical approach. From photoemission the detailed C1s and valence band response of these narrow diameter tubes is studied. The observed electronic structure is in sound agreement with state of the art ab initio calculations using density functional theory., T. P. and K.DBacknowledge financial support from DFG projects PI 440 3/4/5. T. P. thanks the FWF P21333-N20 and H. S. the Leverhulme Trust for support through an early career fellowship and EPSRC through Portfolio Partnership grant. D. J. M. and A. R. thank ETSF-I3 (contract nr. 211956). We acknowledge European Community’s Seventh Framework Program (FP7/2007-2013) under grant agreement No. 226716., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Supramolecular environment-dependent electronic properties of metal-organic interfaces

  • El-Sayed, Afaf
  • Mowbray, Duncan J.
  • García-Lastra, J. M.
  • Rogero, Celia
  • Goiri, Elizabeth
  • Borghetti, Patrizia
  • Turak, A.
  • Doyle, Bryan P.
  • Dell’Angela, Martina
  • Floreano, Luca
  • Wakayama, Yutaka
  • Rubio, Angel
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
Model donor-acceptor assemblies at metal-organic interfaces, namely, fluorinated copper-phthalocyanines (F 16CuPC) and pentacene (PEN) assemblies on the Au(111) surface, have been the focus of the present study. A full picture of the crystallographic and electronic structure of PEN and F 16CuPC monolayers as well as of their 1:1 binary mixture on the Au(111) surface has been explored by means of a variety of surface-sensitive techniques, providing important information on the intermolecular and molecule-substrate interactions governing the self-assembly process. A long-range ordered donor-acceptor network is observed for the mixture as a result of the greatly enhanced intermolecular interaction via C-F···H-C hydrogen bonds. Interestingly, the new supramolecular structure involves changes in the electronic structure of the molecular components. In particular, the strongest changes are observed at the C and F atoms of the F 16CuPc, as opposed to the F 16CuPc N, Cu, or PEN C atoms. With the aid of theoretical calculations, such effects are found to be at least partially related to an upward shift in energy of the F 16CuPc molecular orbitals, concomitant with a molecule-to-metal charge donation, not from the HOMO, but deeper lying orbitals. © 2012 American Chemical Society., This work was supported by the Spanish MICINN (MAT2010-21156-C03-01, C03-03, PIB2010US-00652) and the Basque Government (IT-257-07). The SRC is funded by the National Science Foundation (award no. DMR-0084402). B.P.D. thanks the ICTP (Trieste) for travel funding. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007- 2013) through the Integrated Infrastructure Initiative “European Light Sources Activities − Synchrotrons and Free Electron Lasers” (grant agreement no. 226716)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of annealing conditions on the formation of regular lattices of voids and Ge quantum dots in an amorphous alumina matrix

  • Pinto, S. R. C.
  • Martín-Sánchez, Javier
  • Ramos, A. R.
  • Barradas, N. P.
  • Gomes, M. J. M.
In this work, the influence of air pressure during the annealing of Ge quantum dot (QD) lattices embedded in an amorphous Al 2O 3 matrix on the structural, morphological and compositional properties of the film is studied. The formation of a regularly ordered void lattice after performing a thermal annealing process is explored. Our results show that both the Ge desorption from the film and the regular ordering of the QDs are very sensitive to the annealing parameters. The conditions for the formation of a void lattice, a crystalline Ge QD lattice and a disordered QD lattice are presented. The observed effects are explained in terms of oxygen interaction with the Ge present in the film. © 2012 IOP Publishing Ltd., This study has been partially funded through the projects (i) FEDER funds through the COMPETE program ‘Programa Operacional Factores de Competitividade’ and by Portuguese funds through the Portuguese foundation for Science and Technology (FCT) in the frame of the project PTDC/FIS/70194/2006 and PEst-C-FIS/UI607/2011–2012; (ii) ELETTRA Synchrotron Radiation Center through the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement no 226716. SRCP is grateful for financial support through the FCT grant SFRH/BPD/73548/2010 and JMS is grateful for financial support through the Spanish CSIC JAE-DOC program. MB acknowledges support from the Croatian Ministry of Science, Higher Education and Sport (project number 098-0982886-2859)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spin-state transition in Pr0.5Ca0.5CoO3 analyzed by x-ray absorption and emission spectroscopies

  • Herrero Martín, Javier
  • García Muñoz, Josep Lluís
  • Kvashnina, K.
  • Gallo, E.
  • Subías, Gloria
  • Alonso, J. A.
  • Barón González, Aura J.
We present a study of the Co spin-state changes in Pr 0.5Ca 0.5CoO 3 across the metal-insulator transition by means of the analysis of two complementary synchrotron x-ray spectroscopic techniques. Recorded experimental and charge transfer multiplet-based calculated Co L 2,3 absorption spectra, in combination with Co Kβ main emission lines, indicate that Co3 + ion spin state evolves from low in the insulating phase to a low:high mixed state in the metallic regime, close to a 1:1 ratio at ambient temperature. A pure high spin state can be discarded, while the occurrence of an intermediate state is also questioned. © 2012 American Physical Society., We are thankful for financial support from MICINN (Spanish government) under projects MAT2009-09308, NANOSELECT under Project No. CSD2007-00041, and the ESRF and BESSY for the provision of beamtime. The research leading to these results has received funding from the European Community’s Seventh Framework Program (FP/2007-2013) under Grant No. 226716. J.H.-M. also thanks CSIC for the JAEdoc contract, cofinanced by the European Social Fund., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Rheological and structural details of biocidal iPP-TiO 2 nanocomposites

  • Serrano, Cristina
  • Cerrada, María L.
  • Fernández-García, Marta
  • Ressia, Jorge
  • Vallés, Enrique M.
Nanocomposites obtained from incorporation of TiO 2 nanoparticles in different amounts, ranging from 0.5 to 5 wt.%, into an isotactic polypropylene (iPP) matrix are achieved via a straightforward and cost-effective melting process. These materials exhibit a powerful germicide capability over a wide variety of regular bacteria and other microorganisms widely present in the environment that cause infections and serious illness. The iPP-TiO 2 nanocomposites show similar or improved structural characteristics than those of the pure iPP matrix and aspects as important as processability and final mechanical performance seem to be not affected because of the incorporation of these TiO 2 nanoparticles. Validation of time-temperature superposition of the molten polymers is observed within the temperature range analyzed. On the other hand, the α polymorph is the one primarily attained for these specimens. Crystallinity and most probable crystallite size are slightly dependent on TiO 2 content, both increasing as oxide composition is enlarged. © 2011 Elsevier Ltd. All rights reserved., The authors are grateful for the financial support of Ministerio de Ciencia e Innovación (project MAT2010-19883). J. Ressia and E. Vallés acknowledge the financial support from CONICET, FONCyT and UNS. Ms. C. Serrano is also grateful to Ministerio de Ciencia e Innovación for her FPU predoctoral grant. The synchrotron work leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Composition and bonding structure of boron nitride B1- xNx thin films grown by ion-beam assisted evaporation

  • Caretti, Ignacio
  • Jiménez Guerrero, Ignacio
We present a detailed study of B1-xNx (0 < x < 0.6) films synthesized at room temperature by N2+ ion-beam assisted evaporation of boron. The atom-ion ratio was related to the final boron concentration as determined by X-ray energy dispersive spectroscopy (XEDS), and to the bonding structure explored by infrared (IR) and X-ray absorption near-edge structure (XANES) spectroscopies. IR and XANES revealed that N-rich boron nitrides had a graphite-like structure with embedded nitrogen molecules, while B-rich boron nitrides consisted of different ratios of B 13N2/h-BN phases. Our spectroscopic results indicate that this B13N2 structure is made of B12 icosahedral units linked by N-B-N linear chains. © 2011 Elsevier B.V. All rights reserved., We are indebted to A. Vollmer for her help at the Optics beamline (SURICAT endstation) of the Helmholtz-Zentrum Berlin - Electron storage ring BESSY II. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n.226716. This work has been partially financed by the Spanish MICINN through project Consolider FUNCOAT CSD2008-0023, and project MOCASIN MAT2010-21070-C02-02. I. Caretti acknowledges support from CSIC through a JAE-Doc fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electronic structure of reconstructed Au(100): Two-dimensional and one-dimensional surface states

  • Bengió, S.
  • Navarro, V.
  • González-Barrio, M. A.
  • Cortés, R.
  • Vobornik, I.
  • Michel, Enrique G.
  • Mascaraque, Arantzazu
The clean surface of Au(100) presents a complex reconstruction characterized by a hexagonal topmost layer. We report an angle-resolved photoemission study of the electronic structure of this surface, including an analysis of the Fermi surface, combined with structural information from low-energy electron diffraction and scanning tunneling microscopy. In the complex Fermi surface map found, we identify different contributions from the bulk bands, from interface states located below the hexagonal topmost layer, and from the hexagonal topmost layer itself. The electronic states related to this layer exhibit quasi-one-dimensional character, in agreement with the chain aspect of the reconstructed layer, as demonstrated by their dispersion, periodicity, and reciprocal space location. © 2012 American Physical Society., We acknowledge financial support from MINECO (Spain) under Grants No. MAT2010-21156-C03-02 and No. FIS2011-23230. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of the oxygen partial pressure and post-deposition annealing on the structure and optical properties of ZnO films grown by dc magnetron sputtering at room temperature

  • Yuste, Miriam
  • Escobar Galindo, R.
  • Caretti, Ignacio
  • Torres, Ricardo
  • Sánchez Garrido, Olga
A systematic study for the optimization of the deposition process of ZnO thin films grown by dc magnetron sputtering at room temperature was carried out using different oxygen partial pressures and deposition times. We have established a correlation between the oxygen partial pressure, the chemical composition and the crystalline structure of the films. Stoichiometric and highly oriented ZnO thin films along the (002) crystal plane with very good optical performance were obtained for a relative oxygen gas flow of 20% in the gas mixture. Higher O2 concentrations resulted in non-stoichiometric ZnO with an excess of oxygen, which exhibited a lower degree of crystallinity and slightly higher band-gap energy. X-ray absorption near edge structure (XANES) analysis indicated that this excess of oxygen was incorporated in molecular form inducing a reduction in the crystallinity of the material. Post-deposition annealing treatments up to 500°C significantly improved their crystallinity as confirmed by x-ray diffraction and XANES. Therefore, it has been found that it is possible to grow ZnO at room temperature with high crystal quality and good optical response by controlling the growth conditions. © 2012 IOP Publishing Ltd., This work has been supported by the Ministerio de Ciencia e Innovación of (MICINN) of Spain through the Consolider-Ingenio 2010 programme (project FUNCOAT CSD2008- 00023) and through project MAT2008-06618-C02-02/MAT. We are indebted to A Vollmer for her help at the Optics beamline (SURICAT endstation) of the Helmholtz-Zentrum Berlin - Electron storage ring BESSY II. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no 226716. R Escobar Galindo and I Caretti acknowledge support from MICINN and CSIC through Ramon y Cajal (RyC2007-0026) and JAE-Doc fellowships, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dissociative photoionization of the NO molecule studied by photoelectron-photon coincidence technique

  • Kivimäki, A.
  • Alvarez-Ruiz, J.
  • Coreno, M.
  • Simone, M. de
  • Moise, A.
  • Partanen, L.
  • Richter, R.
  • Stankiewicz, M.
Low-energy photoelectron-vacuum ultraviolet (VUV) photon coincidences have been measured using synchrotron radiation excitation in the inner-valence region of the nitric oxide molecule. The capabilities of the coincidence set-up were demonstrated by detecting the 2s-1 → 2p-1 radiative transitions in coincidence with the 2s photoelectron emission in Ne. In NO, the observed coincidence events are attributed to dissociative photoionization with excitation, whereby photoelectron emission is followed by fragmentation of excited NO+ ions into O+ + N* or N+ + O* and VUV emission from an excited neutral fragment. The highest coincidence rate occurs with the opening of ionization channels which are due to correlation satellites of the 3σ photoionization. The decay time of VUV photon emission was also measured, implying that specific excited states of N atoms contribute significantly to observed VUV emission. © 2010 Elsevier B.V., AK, MC and MdS acknowledge the Italian National Research Council (CNR) for funding their research activity at the Gas Phase beamline, Elettra, under projects MD.P06.016.002 (CNR-IOM) and MD.P03.026.001 (CNR-IMIP). LP acknowledges funding from the Research Council of University of Oulu, Finland. The research leading to these results has also received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Cryo X-ray nano-tomography of vaccinia virus infected cells

  • Chichón, Francisco Javier
  • Rodríguez, María Josefa
  • Perdiguero, Beatriz
  • Esteban, Mariano
  • Carrascosa, José L.
We have performed full-field cryo X-ray microscopy in the water window photon energy range on vaccinia virus (VACV) infected cells to produce tomographic reconstructions. PtK2 cells were infected with a GFP-expressing VACV strain and frozen by plunge fast freezing. The infected cells were selected by light fluorescence microscopy of the GFP marker and subsequently imaged in the X-ray microscope under cryogenic conditions. Tomographic tilt series of X-ray images were used to yield three-dimensional reconstructions showing different cell organelles (nuclei, mitochondria, filaments), together with other structures derived from the virus infection. Among them, it was possible to detect viral factories and two types of viral particles related to different maturation steps of VACV (immature and mature particles), which were compared to images obtained by standard electron microscopy of the same type of cells. In addition, the effect of radiation damage during X-ray tomographic acquisition was analyzed. Thin sections studied by electron microscopy revealed that the morphological features of the cells do not present noticeable changes after irradiation. Our findings show that cryo X-ray nano-tomography is a powerful tool for collecting three-dimensional structural information from frozen, unfixed, unstained whole cells with sufficient resolution to detect different virus particles exhibiting distinct maturation levels. © 2011 Elsevier Inc., This work was supported by Grants BFU2008-2328, BFU2011-29038 and Consolider CSD2007-00010 from the MICINN, and S009/MAT-1507 from the CM (to J.L.C) and SAF.2008-02036 (to M.E.). The X-ray microscopy work was funded partly by the Human Frontier Science Program (HFSP) Research Grant Ref. RGP0053/2005-C, and by the European Community’s Seventh Framework Programme (FP712007-2013) under grant agreement n° 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic frustration, phase competition, and the magnetoelectric effect in NdFe3(BO3)4

  • Hamann-Borrero, J. E.
  • Mazzoli, Claudio
  • Herrero Martín, Javier
PACS numbers: 75.85.+t, 75.25. j, 75.30.Et, 78.70.Ck.-- et al., We present an element selective resonant magnetic x-ray scattering study of NdFe3(BO3)4 as a function of temperature and applied magnetic field. Our measurements show that the magnetic order of the Nd sublattice is induced by the Fe spin order. When a magnetic field is applied parallel to the hexagonal basal plane, the helicoidal spin order is suppressed and a collinear ordering, where the moments are forced to align in a direction perpendicular to the applied magnetic field, is stabilized. This result excludes a noncollinear spin order as the origin of the magnetically induced electric polarization in this compound. Instead our data imply that magnetic frustration results in a phase competition, which is the origin of the magnetoelectric response., This work was supported by the DFG through the Emmy Noether Programme (Grant No. GE1647/2-1) and the European Community’s Seventh Framework Program (FP7/2007-2013) under Grant No. 226716., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of carbon content and nitrogen vacancies on the bonding structure and mechanical performance of graphite-like BC xN thin films

  • Caretti, Ignacio
  • Jiménez Guerrero, Ignacio
X-ray absorption near edge structure (XANES) was used to investigate two sets of graphite-like BC xN thin films with similar B:C:N ratios but different amounts of nitrogen vacancies, which become oxygen-filled in the surface-most region. The two sets of samples were grown on Si (100) at room temperature by ion beam assisted deposition using two different ion/atom ratios. Nitrogen vacancy defects were detected in the B1s XANES spectra due to an oxygen decoration mechanism taking place at the film surface, which is correctly described by a core-level shift model. Analysis of the O1s XANES spectra showed two different types of oxygen incorporation in the samples under study. The tribomechanical properties of the BC xN samples were tested by the pin-on-disk technique, revealing the substantial role played by both the carbon intake in the hexagonal BCN planes and the concentration of nitrogen vacancies generated during the growth. © 2012 American Institute of Physics., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n.226716. This work has been partially financed by the Spanish MICINN through project Consolider FUNCOAT CSD2008-0023, and project MOCASIN MAT2010-21070-C02-02. I. Caretti acknowledges support from CSIC through a JAE-Doc fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Glycopolymers obtained by chemical modification of well-defined block copolymers

  • Muñoz-Bonilla, Alexandra
  • León, Orietta
  • Cerrada, María L.
  • Rodríguez-Hernández, Juan
  • Sánchez-Chaves, Manuel
  • Fernández-García, Marta
Well-defined di and triblock copolymers based on 2-hydroxyethyl methacrylate, HEMA, and n-butyl acrylate, BA, have been synthesized by atom transfer radical polymerization, ATRP. Two copolymers have been selected to prepare glycopolymers containing D-(+)-glucosamine or N-(4-aminobutyl)-D- gluconamide, NABG, by chemical modification of HEMA units. The chemical modification occurs by activation of the hydroxyl groups of the HEMA units with highly reactive p-nitrophenyl carbonate groups. The block copolymers structure and self-assembly have been comprehensively studied in solid state and in solution by differential scanning calorimetry, X-ray diffraction, atomic force microscopy and dynamic light scattering. The resulting glycopolymers obtained upon chemical modification turned out to be water soluble. Therefore, their carbohydrate-lectin interactions of have been analyzed by turbidimetry measurements. © 2012 Wiley Periodicals, Inc., The authors acknowledge the financial support of MICINN (MAT2010-17016). The synchrotron work, performed at DESY, received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716. They are grateful for collaboration of the Hasylab personnel, especially S. S. Funari. Additionally, O. Leon and A. Muñoz-Bonilla thank Universidad de Zulia (Venezuela) and CSIC for their predoctoral fellowship and JAE-doc postdoctoral contract, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interface effects in the electronic structure of TiO2 deposited on MgO, Al2O3 and SiO2 substrates

  • Soriano, Leonarado
  • Álvarez, Lucía
We report the Ti 2p X-ray absorption (XAS) and resonant photoemission (RPES) spectra of one equivalent TiO2 monolayer grown on MgO, Al 2O3 and SiO2 substrates. The Ti 2p XAS spectra of these systems were compared to atomic multiplet calculations projected in different octahedral crystal fields. The comparison indicates that the crystal field splitting and the Ti-O hybridization decrease along the MgO, Al 2O3 and SiO2 series. The analysis of the RPES spectra provides the Ti 3d contributions to the valence band in these systems. These were compared to configuration interaction calculations of a TiO 6 cluster for different Ti 3d-O 2p hybridizations. The Ti 3d states in the valence band shift to lower binding energies along the MgO, Al 2O3 and SiO2 series. These effects are attributed to changes in the electronic structure at the interface, which, in turn, are related to the formation of cross-linking Ti-O-M (M = Mg, Al, and Si) bonds. © 2010 Elsevier B.V. All rights reserved., This work has been financially supported by the Spanish Ministerio de Ciencia e Innovación (MICINN) through contracts FUNCOAT-CSD2008-00023, MAT2007-66719-C03-03 and MAT2008-01497. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007–2013) under grant agreement no. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bulk and adsorbed monolayer phase behavior of binary mixtures of undecanoic acid and undecylamine: Catanionic monolayers

  • Clarke, Stuart M.
  • Jefferson, David A.
Differential scanning calorimetry (DSC) and X-ray powder diffraction (PXRD) have been used to determine the phase behavior of the binary mixtures of undecanoic acid (A) and undecylamine (B) in the bulk. In addition, we report DSC data that indicates very similar behavior for the solid monolayers of these materials adsorbed on the surface of graphite. The two species are found to form a series of stoichiometric complexes of the type AB, A2B, and A 3B on the acid rich side of the phase diagram. Interestingly, no similar series of complexes is evident on the amine rich side. As a result of this complexation, the solid monolayers of the binary mixtures exhibit a very pronounced enhancement in stability relative to the pure adsorbates. © 2011 American Chemical Society., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant Agreement No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The three-dimensional structure of [NiFeSe] hydrogenase from Desulfovibrio vulgaris hildenborough: A hydrogenase without a bridging ligand in the active site in its oxidised, "as-isolated" state

  • Marqués, Marta
  • Coelho, Ricardo
  • López de Lacey, Antonio
  • Pereira, Inês A. C.
  • Matías, Pedro M.
Hydrogen is a good energy vector, and its production from renewable sources is a requirement for its widespread use. [NiFeSe] hydrogenases (Hases) are attractive candidates for the biological production of hydrogen because they are capable of high production rates even in the presence of moderate amounts of O2, lessening the requirements for anaerobic conditions. The three-dimensional structure of the [NiFeSe] Hase from Desulfovibrio vulgaris Hildenborough has been determined in its oxidised >as-isolated> form at 2.04-Å resolution. Remarkably, this is the first structure of an oxidised Hase of the [NiFe] family that does not contain an oxide bridging ligand at the active site. Instead, an extra sulfur atom is observed binding Ni and Se, leading to a SeCys conformation that shields the NiFe site from contact with oxygen. This structure provides several insights that may explain the fast activation and O2 tolerance of these enzymes. © 2009 Elsevier Ltd., This work was carried out with the support of the Diamond Light Source. The research leading to these results received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716, from Fundação para a Ciência e Tecnologia (Ministério da Ciência, Tecnologia e Ensino Superior, Lisboa, Portugal) and FEDER Program under research grant no. PTDC/BIA-PRO/70429/2006, from Ministerio de Ciencia e Innovacion (Madrid, Spain) under research grant no. CTQ2006-12097 and from Conselho de Reitores das Universidades Portuguesas and Ministerio de Educación y Ciencia through a Luso–Spanish Joint Action., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial effects in La2/3Sr1/3MnO3 thin films with different complex oxide capping layers

  • Valencia, S.
  • Konstantinović, Z.
  • Gaupp, A.
  • Schmitz, D.
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Interfacialeffects in sputtered La2/3Sr1/3MnO3thin films with different capping layers (MgO, LaAlO3, SrTiO3, NdGaO3, and Au) have been locally investigated by means of x-ray absorption spectroscopy and x-ray magnetic circular dichroism at the Mn L3,2-edge. Data were acquired by using the total electron yield detection mode thus guaranteeing maximum sensitivity to the interface. The data show that LaAlO3 capping almost does not modify the bulklike Mn valence at the interface. In case of SrTiO3 and Au, the presence of divalent Mn is detected, whereas MgO and NdGaO3 capping lead to an increase of the Mn valence oxidation state. The modification of the nominal Mn valence state leads to depressed surfacemagnetization., We acknowledge financial support from the Spanish MEC (MAT2009-08024 and MAT2008-04931/NAN), CONSOLIDER (CSD2007-00041) and FEDER program. The research leading to these results has received funding from the European Community’s Seventh Framework Program (FP7/2007-2013) under Grant No. 226716. Z.K. thanks the Spanish MEC for the financial support through the RyC program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Interfacial effects in manganite thin films with different capping layers of interest for spintronic applications

  • Valencia, S.
  • Konstantinović, Z.
  • Schmitz, D.
  • Gaupp, A.
  • Balcells, Lluis
  • Martínez Perea, Benjamín
We report on the use of surface-sensitive techniques (x-ray absorption spectroscopy and x-ray magnetic circular dichroism) to investigate interfacial effects in sputtered manganite thin films, La2/3Ca 1/3MnO3 (LCMO) and La2/3Sr 1/3MnO3 (LSMO), with different capping layers [MgO, LaAlO3 (LAO), SrTiO3 (STO), NdGaO3 (NGO), and Au]. To ensure surface sensitivity, data were acquired by using the total electron yield detection mode. It is found that LSMO and LCMO films exhibit similar behavior when capped with oxide layers but dissimilar effects when a metallic capping is used. Almost bulklike Mn valence at the interface was observed in the case of LAO capping. However, a notorious increase of the Mn oxidation state was detected for both MgO and NGO capping layers. In contrast, metallic Au and STO capping promotes a reduction of the Mn oxidation state. These results are correlated with the x-ray magnetic circular dichroism data, showing a concomitant decrease of the saturation magnetization at the interface in those cases where a modification of the Mn oxidation state is observed. © 2011 American Physical Society., We acknowledge financial support from the Spanish MEC (MAT2009-08024), CONSOLIDER (CSD2007-00041), and FEDER program. The research leading to these results has received funding from the European Community’s Seventh Framework Program (FP7/2007-2013) under Grant No. 226716. Z.K. thanks the Spanish MEC for the financial support through the RyC program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Coordination chemistry of titanium and zinc in Ti(1−x)Zn2xO2 (0 ≤ x ≤ 1) ultrathin films grown by DC reactive magnetron sputtering

  • Caretti, Ignacio
  • Yuste, Miriam
  • Torres, Ricardo
  • Sánchez Garrido, Olga
  • Jiménez Guerrero, Ignacio
  • Escobar Galindo, R.
XANES and RBS were used to explore the structural phase and composition transitions of ultrathin films with Ti (1-x)Zn 2xO 2 stoichiometries, from very low (∼0.5 at.%) to high (∼25 at.%) titanium content. In this way, the coordination chemistry of Ti 4+ and Zn 2+ cations was examined for a wide range of oxide compositions. © 2012 The Royal Society of Chemistry., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under grant agreement n.226716. This work has been partially financed by the Spanish MICINN through project Consolider FUNCOAT CSD2008-0023, and project MOCASIN MAT2010-21070-C02-02. I. Caretti acknowledges support from CSIC through a JAEDoc fellowship. R. Escobar Galindo would like to thank the MCINN for the financial support within the Ramón y Cajal programme (RyC2007-0026)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dissociation of energy selected Sn(CH3)4 +, Sn(CH3)3Cl+, and Sn(CH3) 3Br+ ions: Evidence for isolated excited state dynamics

  • Baer, Tomas
  • Guerrero, Andrés
  • Dávalos, J.Z.
  • Bodi, Andras
The dissociation dynamics of Sn(CH3)4 +, Sn(CH3)3Cl+, and Sn(CH3) 3Br+ were investigated by threshold photoelectron photoion spectrometry using an electron imaging apparatus (iPEPICO) at the Swiss Light Source. The tetramethyltin ion was found to dissociate via Sn(CH 3)4 + → Sn(CH3)3 + + CH3 → Sn(CH3)2 + + 2 CH3, while the trimethyltin halide ions dissociated via methyl loss at low energies, and a competitive halogen loss at somewhat higher energies. The 0 K methyl loss onset for the three ions was found to be 9.410 ± 0.020 eV, 10.058 ± 0.020 eV, and 9.961 ± 0.020 eV, respectively. Statistical theory could not reproduce the observed onsets for the halogen loss steps in the halotrimethyltin ions. The halide loss signal as a function energy mimicked the excited state threshold photoelectron spectrum, from which we conclude that the halide loss from these ions takes place on an isolated excited state potential energy surface, which we describe by time dependent density functional calculations. The sequential loss of a second methyl group in the Sn(CH3)4 + ion, observed at about 3 eV higher energies than the first one, is also partially non-statistical. The derived product energy distribution resulting from the loss of the first methyl group is two-component with about 50% being statistical and the remainder associated with high translational energy products that peak at 2 eV. Time dependent DFT calculations show that a dissociative B state lies in the vicinity of the experimental measurements. We thus propose that 50% of the Sn(CH3)4 + ions produced in this energy range internally convert to the X state, on which they dissociate statistically, while the remainder dissociate directly from the repulsive B state leading to high kinetic energy products. This journal is © the Owner Societies., This work was financially supported by grants from the US National Science Foundation, the US Department of Energy, a grant to TB from the Spanish MICINN (Ref. SAB2009-0028) and the Spanish MICINN Project CTQ2009-13652. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Metallocene ethylene-co-(5,7-dimethylocta-1, 6-diene) copolymers crosslinked using electron beam irradiation: a tunable alternative

  • Cerrada, María L.
  • Benavente, Rosario
  • Fernández-García, Marta
  • Pérez Tabernero, Ernesto
  • Campos, Joâo M.
  • Ribeiro, M. Rosario
Ethylene-co-(5,7-dimethylocta-1,6-diene) copolymers with various 5,7-dimethylocta-1,6-diene contents incorporate double bonds in the lateral chains that facilitate the development of crosslinkings in the resulting polymeric material after electron beam irradiation. As an effect of such irradiation, crystallization is delayed but crystallinity remains practically constant after melting and further cooling of irradiated specimens. Crystallinity, crystallite thickness and gel content are key parameters in the mechanical performance of these copolymers. Consequently, the controlled incorporation of non-conjugated dienes into the polyethylene structure appears as an alternative strategy for tuning the mechanical response in crosslinked polyolefins. Moreover, the resulting materials exhibit good thermal stability. © 2011 Society of Chemical Industry., The authors are grateful for the financial support of Ministerio de Ciencia e Innovación (project MAT2010-19883), Exchange Collaboration Program CSIC/FCT (projects 2005PT0033/Proc. 4-1-1 Espanha 2006/2007 and 2009PT0026/Proc. 441.00 CSIC) and Fundaçâo para a Ciência e a Tecnologia, Programa Operacional Ciência Tecnologia e Inovaçâo (POCTI) do Quadro Comunitário de Apoio III e comparticipado pelo Fundo Comunitário Europeu FEDER (project PDCT/CTM/66408/2006). The synchrotron work, performed at DESY, received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Point defects in hexagonal BN, BC3 and BCxN compounds studied by x-ray absorption near-edge structure

  • Caretti, Ignacio
  • Jiménez Guerrero, Ignacio
The generation of point defects in highly oriented pyrolytic boron nitride (HOPBN) after Ar+ ion bombardment in ultrahigh vacuum and subsequent exposure to air was studied by angle-resolved x-ray absorption near edge structure (XANES). The pristine HOPBN showed well-oriented boron nitride (BN) basal planes parallel to the surface, with a negligible amount of defects. Amorphization of the BN structure took place after Ar+ sputtering, as indicated by the broadening of the XANES spectra and significant decrease of the characteristic π* states. Following air exposure, the XANES analysis revealed a spontaneous reorganization of the sample structure. The appearance of four new π* B1s excitonic peaks indicates an oxygen decoration process of the nitrogen vacancies created by ion bombardment. A core-level shift model is presented to support this statement. This model is successfully extended to the case of oxygen substitutional defects in hexagonal BC3 and BCxN (0 < x < 4) materials, which can be applied to any B-based sp2-bonded honeycomb structure. © 2011 American Institute of Physics., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716. This work has been partially financed by the Spanish MICINN through project Consolider FUNCOAT CSD2008-0023, and project MOCASIN MAT-2010-21070-C02-02. I. Caretti acknowledges support from CSIC through a JAE-Doc Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Annealing of heterogeneous phase TiO2 films: An X-ray absorption and morphological study

  • Gago, Raúl
  • Redondo-Cubero, A.
  • Vinnichenko, M.
  • Vázquez Burgos, Luis
El pdf del artículo es la versión post-print., Heterogeneous TiO2 films with nanocrystalline (nc-) rutile and amorphous (a-) phases were annealed in vacuum up to 450 °C. The structural and morphological changes were studied by in situ X-ray absorption and ex-situ X-ray diffraction and atomic force microscopy. The annealing process leads to phase and morphological changes depending on the initial phase mixture. Films with dominant nc-rutile phase are quite stable whereas in a-TiO 2-containing films the a-TiO2 regions crystallize into nc-anatase at 300 °C. The latter is attributed to the initial anatase-like character of a-TiO2. Interestingly, at 450 °C nc-anatase or nc-rutile is preferentially promoted for high or low initial a-TiO2 contents, respectively. © 2011 Elsevier B.V. All rights reserved., This research has been funded from the EC’s FP7/2007-2013 under Grant No. 226716 and from the Spanish ‘Ministerio de Ciencia e Innovación’ through Grants FIS2009-12964-C05-04 and CSD2008-00023. A. Redondo-Cubero acknowledges funding from SFRH/BPD/74095/2010 (Portugal)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring polymer-TiO2 film properties by presence of metal (Ag, Cu, Zn) species: Optimization of antimicrobial properties

  • Kubacka, Anna
  • Ferrer, Manuel
  • Serrano, Cristina
  • Cerrada, María L.
  • Fernández-García, Marta
  • Fernández, M.
Presence of metallic Ag or oxidic Cu and Zn species on an anatase surface is shown to allow drastic improvement of the disinfection capability of polymer-based TiO2-containing nanocomposite films against both gram negative (Escherichia coli) and gram positive (Staphylococcus aureus) bacteria and upon both ultraviolet and visible light excitations. The inorganic incorporation to the polymer matrix is reached without alteration of the main physico-chemical (structural and thermal) characteristics of the organic component. Irrespective of the excitation wavelength, the disinfection capability improvement is observed for Ag and Zn promoted film materials but not for the Cu-containing composite. A study of the optical properties attempts to interpret the biocidal enhancement observed in presence of such Ag, Cu, and Zn-containing species at inorganic-organic interfaces. © 2011 Elsevier B.V., A. Kubacka and C. Serrano acknowledge MICINN for financial supports (Ramón y Cajal postdoctoral and FPU predoctoral grants, respectively). Funding of MICINN is acknowledged (CTQ2010-14872/BQU, MAT2010-17016, MAT2010-19883, PLE2009-0037). The synchrotron work leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Monolayer structures of alkyl aldehydes: Odd-membered homologues

  • Phillips, T. K.
  • Clarke, Stuart M.
  • Castro Arroyo, Miguel Ángel
  • Millán, Carmen
  • Medina, Santiago
Crystalline monolayers of three aldehydes with an odd number of carbon atoms in the alkyl chain (C 7, C 9 and C 11) at low coverages are observed by a combination of X-ray and neutron diffraction. Analysis of the diffraction data is discussed and possible monolayer crystal structures are proposed; although unique structures could not be ascertained for all molecules. We conclude that the structures are flat on the surface, with the molecules lying in the plane of the layer. The C 11 homologue is determined to have a plane group of either p2, pgb or pgg, and for the C 7 homologue the p2 plane group is preferred. © 2010 Elsevier B.V. All rights Reserved., The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Planar growth of pentacene on the dielectric TiO2(110) surface

  • Lanzilotto, Valeria
  • Sánchez-Sánchez, Carlos
  • Bavdek, Gregor
  • Cvetko, Dean
  • López, María Francisca
  • Martín-Gago, José A.
  • Floreano, Luca
We have studied the growth of pentacene molecules on the unreconstructed and stoichiometric surface of TiO2(110). At variance with its characteristic homeotropic growth mode, pentacene is found to be physisorbed on this dielectric substrate with its long molecular axis oriented parallel to the surface and aligned along the [001] direction. Pentacene molecules couple side-by-side into long stripes running along the [11̅0] direction, where the overlayer preserves the substrate lattice periodicity (6.5 Å). In the opposite direction, head-to-head pentacene repulsion drives the ordering of the stripes, whose spacing simply depends on the surface coverage. By near-edge X-ray absorption, NEXAFS, we have determined the pentacene molecules to be tilted by ∼25° off the surface around their long axis. At the monolayer coverage, the pentacene orientation and spacing are very close to that of the (010) bulk planes (also called a−c planes) of pentacene crystals. We have observed that at least two additional layers can be grown on top of the monolayer following a planar configuration. Both the strong side-by-side intermolecular attraction and the full development of the bulklike electronic states, as probed by NEXAFS, suggest an optimal charge transport along the monolayer stripes of lying-down molecules, Financial support from the Spanish CYCIT (MAT2008-1497) and the Ministry of Science and Innovation (CSD2007-41 NANOSELECT) is greatly acknowledged. C.S.-S. is grateful to Ministerio de Educación for the AP2005-0433 FPU grant. Funding from the European Community Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 226716 is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical changes in irradiated polypropylene studied by X-ray photoabsorption and advanced EPR/ENDOR spectroscopies

  • Caretti, Ignacio
  • Jiménez Guerrero, Ignacio
  • Doorslaer, S. van
Pulsed and Continuous-wave (CW) Electron Paramagnetic Resonance (EPR) in combination with X-ray absorption near edge structure (XANES) analysis is used to study the bulk and surface modification of isotactic polypropylene (i-PP) conducted by X-ray irradiation and O2, Ar and N2 plasma treatments. In all cases, a midchain peroxy radical is the major species detected by CW-EPR, with little delocalization onto the i-PP main chain, as revealed by X-band Mims electron nuclear double resonance and hyperfine sublevel correlation. Besides, surface functionalization of plasma treated i-PP is discussed on the light of XANES results with emphasis in the more complex case of N2 plasma modification. The article gives a comprehensive picture of the chemical changes that occur in irradiated i-PP, with implications in sterilization, surface activation, and adhesion enhancement procedures. © 2014 Elsevier B.V., The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under Grant Agreement No. 226716. This work has been partially financed by the Spanish MICINN through Project Consolider FUNCOAT CSD2008-0023, and project MOCASINN MAT2010-21070-C02-02. I. Caretti acknowledges support from CSIC through a JAE-Doc fellowship. S. Van Doorslaer acknowledges support from the Hercules Foundation, Flanders (Contract AUHA013)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemistry and temperature-assisted dehydrogenation of C60H30 molecules on TiO2(110) surfaces

  • Sánchez-Sánchez, Carlos
  • Martínez, José I.
  • Lanzilotto, Valeria
  • Biddau, Giulio
  • Gómez-Lor, Berta
  • Pérez, Rubén
  • Floreano, Luca
  • López, María Francisca
  • Martín-Gago, José A.
The thermal induced on-surface chemistry of large polycyclic aromatic hydrocarbons (PAHs) deposited on dielectric substrates is very rich and complex. We evidence temperature-assisted (cyclo)dehydrogenation reactions for C 60H30 molecules and the subsequent bottom-up formation of assembled nanostructures, such as nanodomes, on the TiO2(110) surface. To this aim we have deposited, under ultra-high vacuum, a submonolayer coverage of C60H30 and studied, by a combination of experimental techniques (STM, XPS and NEXAFS) and theoretical methods, the different chemical on-surface interaction stages induced by the increasing temperature. We show that room temperature adsorbed molecules exhibit a weak interaction and freely diffuse on the surface, as previously reported for other aromatics. Nevertheless, a slight annealing induces a transition from this (meta)stable configuration into chemisorbed molecules. This adsorbate-surface interaction deforms the C60H30 molecular structure and quenches surface diffusion. Higher annealing temperatures lead to partial dehydrogenation, in which the molecule loses some of the hydrogen atoms and LUMO levels spread in the gap inducing a net total energy gain. Further annealing, up to around 750 K, leads to complete dehydrogenation. At these temperatures the fully dehydrogenated molecules link between them in a bottom-up coupling, forming nanodomes or fullerene-like monodisperse species readily on the dielectric surface. This work opens the door to the use of on-surface chemistry to generate new bottom-up tailored structures directly on high-K dielectric surfaces. © 2013 The Royal Society of Chemistry., We acknowledge financial support by the Spanish projects MAT2011-26534, MAT2008-02929-NAN, PLE2009-0061, MAT2011-23627, CTQ2010–18813, S2009/MAT-1756/CAM and CONSOLIDER projects CDS2007-0041 and CSD2010-00024. CSS thanks the Ministerio de Educación for the AP2005-0433 FPU grant. JIM acknowledges funding from CSIC trough JaeDoc fellowship program. This research has been partially funded through the European Program “ELISA”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

X-ray absorption study of the local structure at the NiO/oxide interfaces

  • Preda, I.
  • Soriano, Leonarado
  • Díaz-Fernández, D.
  • Domínguez-Cañizares, Guillermo
  • Gutiérrez-Delgado, Alejandro
  • Castro, Germán R.
  • Chaboy, Jesús
This work reports an X-ray absorption near-edge structure (XANES) spectroscopy study at the Ni K-edge in the early stages of growth of NiO on non-ordered SiO2, Al2O3 and MgO thin films substrates. Two different coverages of NiO on the substrates have been studied. The analysis of the XANES region shows that for high coverages (80 Eq-ML) the spectra are similar to that of bulk NiO, being identical for all substrates. In contrast, for low coverages (1 Eq-ML) the spectra differ from that of large coverages indicating that the local order around Ni is limited to the first two coordination shells. In addition, the results also suggest the formation of cross-linking bonds Ni - O - M (M = Si, Al, Mg) at the interface. © 2013 International Union of Crystallography Printed in Singapore - all rights reserved., This work was partially supported by the Spanish CONSOLIDER Project FUNCOAT CSD2008-00023, the ENE2010-21198-C04-04 and MAT2011-27573-C04-04 projects and by the Aragón DGA NETOSHIMA grant. We acknowledge the Spanish Ministerio de Ciencia e Innovación and CSIC for financial support and for provision of synchrotron radiation and we would like to thank the staff of SpLine at ESRF and KMC2 at BESSY II for technical support. The research leading to these results has received funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Computing C1s X-ray absorption for single-walled carbon nanotubes with distinct electronic type

  • Mowbray, Duncan J.
  • Ayala, Paola
  • Pichler, Thomas
  • Rubio, Angel
El pdf del artículo es la versión post-print., The experimental data recorded for the C1s edge in X-ray absorption spectroscopy for graphite, graphene and nanotubes, have consistently exhibited certain discrepancies when compared with theoretical calculations. A theoretical approach to estimate the energy scale normalization for the C1s shape in X-ray absorption is presented within the time dependent density functional theory and random phase approximation framework employing the loss function. The position of the σ* resonance is fairly localized whereas core hole effects must be envisaged in order to have an agreement with the delocalization of the π* resonance, which is displaced by ∼2 eV. Here we report a combined experimental and theoretical approach to identify the electronic conduction band of single walled carbon nanotubes using X-ray absorp- tion, taking into account their metallic character., This work was supported by the Austrian Science Fund through project FWF P21333-N20. The research leading to these results has received funding from the EU (FP7/2007-2013) under grant agreement No. 226716. P.A. was supported by a Marie Curie Intra European Fellowship within the 7th European Community Framework Programme. A.R. acknowledges the support of the European Research Council Advanced Grant DYNamo (ERC-2010-AdG-Proposal No. 267374), Spanish MICINN (FIS2010-21282-C02-01), “Grupos Consolidados UPV/EHU del Gobierno Vasco” (IT-319-07), ACI-Promociona (ACI2009-1036) and European Community e-I3 ETSF project (Contract No. 211956). D.J.M. acknowledges funding through the Spanish ”Juan de la Cierva” program (JCI-2010- 08156)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Customized electronic coupling in self-assembled donor-acceptor nanostructures

  • Oteyza, Dimas G. de
  • García-Lastra, J. M.
  • Corso, Martina
  • Doyle, Bryan P.
  • Floreano, Luca
  • Morgante, Alberto
  • Wakayama, Yutaka
  • Rubio, Angel
  • Ortega, J. Enrique
Charge transfer processes between donor-acceptor complexes and metallic electrodes are at the heart of novel organic optoelectronic devices such as solar cells. Here, a combined approach of surface-sensitive microscopy, synchrotron radiation spectroscopy, and state-of-the-art ab initio calculations is used to demonstrate the delicate balance that exists between intermolecular and molecule-substrate interactions, hybridization, and charge transfer in model donor-acceptor assemblies at metal-organic interfaces. It is shown that charge transfer and chemical properties of interfaces based on single component layers cannot be naively extrapolated to binary donor-acceptor assemblies. In particular, studying the self-assembly of supramolecular nanostructures on Cu(111), composed of iuorinated copperphthalocyanines (F16CuPc) and diindenoperylene (DIP), it is found that, in reference to the associated single component layers, the donor (DIP) decouples electronically from the metal surface, while the acceptor (F16CuPc) suffers strong hybridization with the substrate © 2009 WILEY-VCH Verlag GmbH & Co. KGaA., This work was supported by the European Community through the Integrated Infrastructure Initiative ‘‘European Light Sources Activities – Synchrotrons and Free Electron Lasers’’. The work was further supported through the Spanish Ministerio de Educacio´n y Ciencia (MAT2007-63083, FIS2007-65702-C02-01), ‘‘Grupos Consolidados UPV/EHU del Gobierno Vasco’’ (IT-319-07, IT-257-07), CSIC, and the European Community throughe-I3 ETSF project (Contract Number 211956), and NANO-ERA CHEMISTRY. We acknowledge support by the ‘‘Red Espanola de Supercomputacion’’ and SGIker ARINA(UPV/EHU). J. M. G.-L. acknowledges funding Spanish MEC through Juan de la Cierva program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Self-assembly of bicomponent molecular monolayers: Adsorption height changes and their consequences

  • Goiri, Elizabeth
  • Matena, Manfred
  • El-Sayed, Afaf
  • Lobo-Checa, Jorge
  • Borghetti, Patrizia
  • Rogero, Celia
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
Under the terms of the Creative Commons Attribution License 3.0 (CC-BY).-- et al., Codeposition of two molecular species [copper phtalocyanine (CuPc, donor) and perfluoropentacene (PFP, acceptor)] on noble metal (111) surfaces leads to the self-assembly of an ordered mixed layer with a maximized donor-acceptor contact area. The main driving force behind this arrangement is assumed to be the intermolecular C-Hâ̄F hydrogen-bond interactions. Such interactions would be maximized for a coplanar molecular arrangement. However, precise measurement of molecule-substrate distances in the molecular mixture reveals significantly larger adsorption heights for PFP than for CuPc. Most surprisingly, instead of leveling to increase hydrogen-bond interactions, the height difference is enhanced in the blends as compared to the heights found in single-component CuPc and PFP layers. The increased height of PFP in mixed layers points to an overall reduced interaction with the underlying substrate, and its influence on electronic properties like the interface dipole is investigated through work function measurements. © 2014 American Physical Society., This work was supported by the Spanish Grants No. MAT2010-21156-C03-01 and-C03-03, as well as No. PIB2010US-00652, and by the Basque Government (Grant No. IT-621-13). D. G. O. acknowledges support from the European Union under Grant No. FP7-PEOPLE-2010-IOF-271909. We acknowledge funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molecular-level realignment in donor-acceptor bilayer blends on metals

  • Borghetti, Patrizia
  • Oteyza, Dimas G. de
  • Rogero, Celia
  • Goiri, Elizabeth
  • Verdini, Alberto
  • Cossaro, Albano
  • Floreano, Luca
  • Ortega, J. Enrique
Molecular bilayers made up of a donor-acceptor blend in contact with the metal and capped with a single-component layer show a tunable energy level alignment at both metal-organic and organic-organic interfaces. To ensure sharp heteromolecular interfaces, a contact layer is formed by a stable blend of pentacene (PEN) and perfluorinated copper phthalocyanine (FCuPc) on Au(111) and Ag(111) and of perfluoropentacene (PFP) and copper phthalocyanine (CuPc) on Ag(111). Core-level and valence band photoemission reveal that, upon capping with pure FCuPc, CuPc, and PEN, the electronic states of both contact and capping layers >realign> with respect to the monolayer and the multilayer references. The sign of the shift depends clearly on whether the capping layer is donor-like (PEN, CuPc) or acceptor-like (FCuPc). As revealed by NEXAFS, the shift in electronic levels of the contact layer upon capping leads to a spectral density variation across the Fermi edge (E); i.e., it induces molecule/metal charge transfer., This work was supported by Spanish Grant No. MAT2013-46593-C6-4-P, the Basque Government grant IT-621-13 and the MIUR of Italy through PRIN project DESCARTES (no. 2010BNZ3F2). We acknowledge funding from the European Community’s Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716 and under grant agreement No. 312284., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spectroscopic fingerprints of work-function-controlled phthalocyanine charging on metal surfaces

  • Borghetti, Patrizia
  • El-Sayed, Afaf
  • Goiri, Elizabeth
  • Rogero, Celia
  • Lobo-Checa, Jorge
  • Floreano, Luca
  • Ortega, J. Enrique
  • Oteyza, Dimas G. de
The electronic character of a π-conjugated molecular overlayer on a metal surface can change from semiconducting to metallic, depending on how molecular orbitals arrange with respect to the electrodes Fermi level. Molecular level alignment is thus a key property that strongly influences the performance of organic-based devices. In this work, we report how the electronic level alignment of copper phthalocyanines on metal surfaces can be tailored by controlling the substrate work function. We even show the way to finely tune it for one fixed phthalocyanine-metal combination without the need to intercalate substrate-functionalizing buffer layers. Instead, the work function is trimmed by appropriate design of the phthalocyanines supramolecular environment, such that charge transfer into empty molecular levels can be triggered across the metal-organic interface. These intriguing observations are the outcome of a powerful combination of surface-sensitive electron spectroscopies, which further reveal a number of characteristic spectroscopic fingerprints of a lifted LUMO degeneracy associated with the partial phthalocyanine charging., This work was supported by the Spanish Grant Nos. MAT2010-21156-C03-01, PIB2010US-00652, and the Basque Government Grant No. IT-621-13. We acknowledge funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant No. 226716., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bonding structure and morphology of chromium oxide films grown by pulsed-DC reactive magnetron sputter deposition

  • Gago, Raúl
  • Vinnichenko, M.
  • Hübner, R.
  • Redondo-Cubero, A.
Chromium oxide (CrO) thin films were grown by pulsed-DC reactive magnetron sputter deposition in an Ar/O discharge as a function of the O fraction in the gas mixture (f) and for substrate temperatures, T, up to 450 °C. The samples were analysed by Rutherford backscattering spectrometry (RBS), spectroscopic ellipsometry (SE), atomic force microscopy (AFM), scanning (SEM) and transmission (TEM) electron microscopy, X-ray diffraction (XRD), and X-ray absorption near-edge structure (XANES). On unheated substrates, by increasing f the growth rate is higher and the O/Cr ratio (x) rises from ∼2 up to ∼2.5. Inversely, by increasing T the atomic incorporation rate drops and x falls to ∼1.8. XRD shows that samples grown on unheated substrates are amorphous and that nanocrystalline CrO (x = 1.5) is formed by increasing T. In amorphous CrO, XANES reveals the presence of multiple Cr environments that indicate the growth of mixed-valence oxides, with progressive promotion of hexavalent states with f. XANES data also confirms the formation of single-phase nanocrystalline CrO at elevated T. These structural changes also reflect on the optical and morphological properties of the films., Financial support from grants FIS2012-38866-C05-05 (Ministerio de Economía y Competitividad, Spain) and P2013/MIT-2775 (Comunidad Autónoma de Madrid, Spain) is greatly acknowledged. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement n.° 226716. Finally, ARC acknowledges funding from “Juan de la Cierva” program by MINECO under contract number JCI-2012-14509.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Phase selectivity in Cr and N Co-Doped TiO2 films by modulated sputter growth and post-deposition flash-lamp-annealing

  • Gago, Raúl
  • Prucnal, Slawomir
  • Hübner, René
  • Munnik, Frans
  • Esteban-Mendoza, David
  • Jiménez, Ignacio
  • Palomares, F. Javier
In this paper, we report on the phase selectivity in Cr and N co-doped TiO2 (TiO2:Cr,N) sputtered films by means of interface engineering. In particular, monolithic TiO2:Cr,N films produced by continuous growth conditions result in the formation of a mixed-phase oxide with dominant rutile character. On the contrary, modulated growth by starting with a single-phase anatase TiO2:N buffer layer, can be used to imprint the anatase structure to a subsequent TiO2:Cr,N layer. The robustness of the process with respect to the growth conditions has also been investigated, especially regarding the maximum Cr content (<5 at.%) for single-phase anatase formation. Furthermore, post-deposition flash-lamp-annealing (FLA) in modulated coatings was used to improve the as-grown anatase TiO2:Cr,N phase, as well as to induce dopant activation (N substitutional sites) and diffusion. In this way, Cr can be distributed through the whole film thickness from an initial modulated architecture while preserving the structural phase. Hence, the combination of interface engineering and millisecond-range-FLA opens new opportunities for tailoring the structure of TiO2-based functional materials., The research leading to these results has received funding from projects RTI2018-095137-B-I00 and MAT2016-80394-R from Ministerio de Ciencia, Innovación y Universidades (Spain) and grant agreement n° 226716 from the European Community’s Seventh Framework Programme (FP7/2007-2013). Funding of TEM Talos F200X by the German Federal Ministry of Education of Research (BMBF) through Grant No. 03SF0451 in the framework of HEMCP is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural impact of chromium incorporation in as-grown and flash-lamp-annealed sputter deposited titanium oxide films

  • Gago, Raúl
  • Prucnal, S.
  • Pérez-Casero, R.
  • Caretti, Ignacio
  • Jiménez Guerrero, Ignacio
  • Lungwitz, F.
  • Cornelius, S.
We address the impact of chromium (Cr) incorporation (<15 at.%) in the structure of titanium dioxide (TiO:Cr) films for as-grown and after flash-lamp-annealing (FLA) states. Samples were produced by DC magnetron sputtering on either unheated or heated (400 °C) substrates. Complementary medium- and local-order information was extracted by X-ray diffraction and absorption near-edge structure, respectively. TiO:Cr grown on unheated substrates are amorphous with the major contribution from Cr and progressive formation of Cr with Cr. On heated substrates, anatase phase is dominant for low Cr levels (≤7 at.%) and the structure evolves with Cr towards a disordered mixed-oxide with rutile structure. By tuning the FLA energy density, customized (single or mixed) phase formation is achieved from (initially amorphous) Cr-free TiO. For amorphous TiO:Cr with low Cr (≤7 at.%), FLA induces a short-range rutile structure but structural ordering is not observed at higher Cr levels. Nonetheless, FLA annihilates Cr sites and promotes Cr, which is associated to the mixed-oxide rutile. FLA also improves the pristine structure of anatase TiO:Cr grown on heated substrates. These results provide relevant information about the atomic structure of mixed oxides and the use of FLA for the synthesis of band-gap engineered TiO-based materials., Financial support from grant P2013/MIT-2775 (Comunidad Autónoma de Madrid, Spain) is greatly acknowledged. The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007–2013) under grant agreement n° 226716.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Carbohydrate-based copolyesters made from bicyclic acetalized galactaric acid

  • Lavilla Aguilar, Cristina
  • Alla Bedahnane, Abdelilah|||0000-0001-8417-4937
  • Martínez de Ilarduya Sáez de Asteasu, Domingo Antxon|||0000-0001-8105-2168
  • Benito, Elena
  • García Martín, Maria de Gracia
  • Galbis Pérez, Juan Antonio
  • Muñoz Guerra, Sebastián|||0000-0002-4273-2301
Mixtures of the dimethyl esters of adipic acid and 2,3:4,5-di-O-methylene-galactaric acid (Galx) were made to react in the melt with either 1,6-hexanediol or 1,12-dodecanediol to produce linear polycyclic copolyesters with aldarate unit contents varying from 10 up to 90 mole %. The copolyesters had weight–average molecular weights in the ∼35,000–45,000 g mol−1 range and a random microstructure, and were thermally stable up to nearly 300 °C. They displayed Tg in the -50 to -7 °C range with values largely increasing with the content in galactarate units. All the copolyesters were semicrystalline with Tm between 20 and 90 °C but only those made from 1,12-dodecanediol were able to crystallize from the melt at a crystallization rate that decreased as the contents in the two comonomers approached each other. Copolyesters containing minor amounts of galactarate units adopted the crystal structure characteristic of aliphatic polyesters but a new crystal polymorph was formed when the cyclic sugar units became the majority. Stress–strain parameters were sensitively affected by composition of the copolyesters with the mechanical behavior changing from flexible/ductile to stiff/brittle with the replacement of adipate units by the galactarate units., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Carbohydrate-based copolyesters made from bicyclic acetalized galactaric acid

  • Lavilla Aguilar, Cristina
  • Alla Bedahnane, Abdelilah
  • Martínez de Ilarduya Sáez de Asteasu, Domingo Antxon
  • Benito, Elena
  • García Martín, Maria de Gracia
  • Galbis Pérez, Juan Antonio
  • Muñoz Guerra, Sebastián
Mixtures of the dimethyl esters of adipic acid and 2,3:4,5-di-O-methylene-galactaric acid (Galx) were made to react in the melt with either 1,6-hexanediol or 1,12-dodecanediol to produce linear polycyclic copolyesters with aldarate unit contents varying from 10 up to 90 mole %. The copolyesters had weight–average molecular weights in the ∼35,000–45,000 g mol−1 range and a random microstructure, and were thermally stable up to nearly 300 °C. They displayed Tg in the -50 to -7 °C range with values largely increasing with the content in galactarate units. All the copolyesters were semicrystalline with Tm between 20 and 90 °C but only those made from 1,12-dodecanediol were able to crystallize from the melt at a crystallization rate that decreased as the contents in the two comonomers approached each other. Copolyesters containing minor amounts of galactarate units adopted the crystal structure characteristic of aliphatic polyesters but a new crystal polymorph was formed when the cyclic sugar units became the majority. Stress–strain parameters were sensitively affected by composition of the copolyesters with the mechanical behavior changing from flexible/ductile to stiff/brittle with the replacement of adipate units by the galactarate units., Peer Reviewed, Postprint (published version)
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

O 1s excitation and ionization processes in the CO2 molecule studied via detection of low-energy fluorescence emission

  • Kivimäki, A.
  • Alvarez Ruiz, Jesus
  • Wasowicz, T.J.
  • Callegari, C.
  • Simone, M. de
  • Alagia, M.
  • Ritchter, R.
  • Coreno, M.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Valence photoionization of the N2 molecule in the region of the N 1s→Rydberg excitations

  • Kivimäki, A.
  • Sankari, R.
  • Flammini, R.
  • Coreno, M.
  • Alvarez Ruiz, Jesus
  • Richter, R.
Archivo Digital UPM
Publication Artículo científico (JournalArticle)

Electronic aspects of formation and properties of local structures around Mn in Cd1−xMnxTe1−ySey

  • Radisavljevic, Ivana
  • Novakovic, Nikola
  • Romcevic, Nebojsa
  • Mitric, Miodrag
  • Kuzmanovic, Bojana
  • Bojanić Antonijevic, Slobodan|||0000-0002-7631-4351
  • Ivanovic, Nenad
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Characterization of charge states in conducting organic nanoparticles by X-ray photoemission spectroscopy

  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Vollmer, Antje
  • Koch, Norbert
  • De Caro, Dominique
  • Jacob, Kane
  • Faulmann, Christophe
  • Valade, Lydie|||0000-0002-6437-0970
The metallic and semiconducting character of a large family of organic materials based on the electron donor molecule tetrathiafulvalene (TTF) is rooted in the partial oxidation (charge transfer or mixed valency) of TTF derivatives leading to partially filled molecular orbital-based electronic bands. The intrinsic structure of such complexes, with segregated donor and acceptor molecular chains or planes, leads to anisotropic electronic properties (quasi one-dimensional or two-dimensional) and morphology (needle-like or platelet-like crystals). Recently, such materials have been synthesized as nanoparticles by intentionally frustrating the intrinsic anisotropic growth. X-ray photoemission spectroscopy (XPS) has emerged as a valuable technique to characterize the transfer of charge due to its ability to discriminate the different chemical environments or electronic configurations manifested by chemical shifts of core level lines in high-resolution spectra. Since the photoemission process is inherently fast (well below the femtosecond time scale), dynamic processes can be efficiently explored. We determine here the fingerprint of partial oxidation on the photoemission lines of nanoparticles of selected TTF-based conductors.