Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Bioactive Patch for Maintenance of Implanted Cells at the Myocardial Infarcted Site

  • Castells-Sala, C.
  • Soler-Botija, C.
  • Arnal Pastor, María Pilar
  • Fernandez-Muinos, T.
  • Mari-Buye, N.
  • Llucia-Valldeperas, A.
  • Sanchez, B.
  • Chachques, J. C.
  • Bayes-Genis, A.
  • Semino, C. E.
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Ischemia produced as a result of myocardial infarction might cause moderate or severe tissue death. Studies under development propose grafting stem cells into the affected area and we hypothesize that this mechanism could be enhanced by the application of a "bioactive implant." The implant herein proposed consists of a thin porous elastomeric membrane, filled with self-assembling nanofibers and human subcutaneous adipose tissue derived progenitor cells. We describe the development and characterization of two elastomeric membranes: poly(ethyl acrylate) (PEA) and poly(caprolactone 2-(methacryloyloxy) ethyl ester) (PCLMA). Both are a good material support to deliver cells within a soft self-assembling peptide and are elastic enough to withstand the stresses arising from the heartbeat. Both developed composites (PEA and PCLMA, combined with self-assembling peptide) equally facilitate the propagation of electrical pulses and maintain their genetic profile of the seeded cells. Preliminary studies with small animal models suggest that, at short times, the bioimplant shows good adhesion with the myocardium. After three days cells loaded in the patch remain alive at the implanted site. We propose that the bioactive patch (elastomeric membranes with self-assembling peptide and cells) could increase the efficacy of future cardiac cell therapy by improving cell immobilization and survival at the affected site., The authors wish to thank the Department of Cardiac Surgery (Hospital Germans Trias i Pujol, Badalona) for their collaboration in obtaining human samples, Dr. Bago for his kind contribution in the cell transduction process and BLI analysis, and Joan Gilabert from Biomaterials Laboratory (GEMAT, IQS-School of Engineering) who kindly helped them with wettability measurements. The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under Grant agreement no. 229239. This work was also supported by Grants from Ministerio de Educacion y Ciencia (SAF2011-30067-C02-01 and M. Arnal-Pastor FPU 2009-1870 grant), Red de Terapia Celular-TerCel (RD12/0019/0029), Red Cardio-vascular (RD12/0042/0047), and Fundacio La Marato de TV3 (122232).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Influence of scaffold morphology on co-cultures of human endothelial and adipose tissue-derived stem cells

  • Arnal Pastor, María Pilar
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] The interior of tissue engineering scaffolds must be vascularizable and allow adequate nutrients perfusion in order to ensure the viability of the cells colonizing them. The promotion of rapid vascularization of scaffolds is critical for thick artificial constructs. In the present study co-cultures of human endothelial and adipose tissue-derived stem cells have been performed in poly(ethyl acrylate) scaffolds with two different pore structures: grid-like (PEA-o) or sponge-like (PEA-s), in combination with a self-assembling peptide gel filling the pores, which aims to mimic the physiological niche. After 2 and 7 culture days, cell adhesion, proliferation and migration, the expression of cell surface markers like CD31 and CD90 and the release of VEGF were assessed by means of immunocytochemistry, scanning electronic microscopy, flow cytometry and ELISA analyses. The study demonstrated that PEA-s scaffolds promoted greater cell organization into tubular-like structures than PEA-o scaffolds, and this was enhanced by the presence of the peptide gel. Paracrine signaling from adipose cells significantly improved endothelial cell viability, proving the advantageous combination of this system for obtaining easily vascularizable tissue engineered grafts., Contract grant sponsor: Spanish Ministry of Education; contract grant number: FPU 2009-1870
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Peptide gel in a scaffold as a composite matrix for endothelial cells

  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Arnal Pastor, María Pilar
[EN] The performance of a composite environment with human umbilical vein endothelial cells (HUVECs) has been studied to provide an in vitro proof of concept of their potential of being easily vascularized. These cells were seeded in 1 mm thick scaffolds whose pores had been filled with a self-assembling peptide gel, seeking to improve cell adhesion, and viability of these very sensitive cells. The combination of the synthetic elastomer poly(ethyl acrylate), PEA, scaffold and the RAD16-I peptide gel provides cells with a friendly ECM-like environment inside a mechanically resistant structure. Immunocytochemistry, flow cytometry and scanning electron microscopy were used to evaluate the cell cultures. The presence of the self-assembling peptide filling the pores of the scaffolds resulted in a truly 3D nanoscale context mimicking the extracellular matrix environment, and led to increased cells survival, proliferation as well as developed cell-cell contacts. The combined system consisting of PEA scaffolds and RAD16-I, is a very interesting approach as seems to enhance endothelization, which is the first milestone to achieve vascularized constructs. (c) 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 3293-3302, 2015., Contract grant sponsor: European Commission FP7 project RECATABI; contract grant number: NMP3-SL-2009-229239 Contract grant sponsor: Spanish Ministerio de Ciencia e Innovacion; contract grant numbers: MAT2011-28791-C03-02 and -03 Contract grant sponsor: Spanish Ministry of Education through M. Arnal-Pastor; contract grant number: FPU 2009-1870
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Coating typologies and constrained swelling of hyaluronic acid gels within scaffold pores

  • Arnal Pastor, María Pilar
  • Keicher, Matthias
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] A set of elastomeric scaffolds with a well defined porous structure was prepared with a template leaching procedure and coated with hyaluronic acid solutions. Depending on the coating process parameters the hyaluronic acid deposited on the pores had configurations ranging from thin disconnected aggregates to a thick continuous layer on the pore surface. The development of the coating layer was studied by scanning electron microscopy and the materials were subjected to dynamical and equilibrium swelling experiments in a water vapor ambient of fixed activity. The porosity change due to coating and to swelling of the coating layer were determined. The hyaluronic acid coating the pores has a different swelling capacity depending on the type of layer formed, as a consequence of the scaffold constraint and of the layer typology. These factors were investigated analytically by modifying the standard theory of gel swelling. An experimental quantity is introduced which reflects the constrainment build-up on gel swelling. © 2011 Elsevier Inc., The authors acknowledge the support of the FP7 NMP3-SL-2009-229239 project "Regeneration of cardiac tissue assisted by bioactive implants (RECATABI)". MMP further acknowledges the support of the Spanish Science & Innovation Ministry through project MAT2008-06434. Roberto Garcia Gomez is thanked for his help in preparing the bare scaffolds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Topologically controlled hyaluronan-based gel coatings of hydrophobic grid-like scaffolds to modulate drug delivery

  • Arnal Pastor, María Pilar
  • Perez Garnes, Manuel
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Scaffolds based on poly(ethyl acrylate) having interwoven channels were coated with a hyaluronan (HA) hydrogel to be used in tissue engineering applications. Controlled typologies of coatings evolving from isolated aggregates to continuous layers, which eventually clog the channels, were obtained by using hyaluronan solutions of different concentrations. The efficiency of the HA loading was determined using gravimetric and thermogravimetric methods, and the hydrogel loss during the subsequent crosslinking process was quantified, seeming to depend on the mass fraction of hyaluronan initially incorporated to the pores. The effect of the topologically different coatings on the scaffolds, in terms of mechanical properties and swelling at equilibrium under different conditions was evaluated and correlated with the hyaluronan mass fraction. The potential of these hydrogel coatings as vehicle for controlled drug release from the scaffolds was validated using a protein model., The authors acknowledge the financing through projects FP7 NMP3-SL-2009-229239 (RECATABI) and MAT2011-28791-C03-02 and -03. This work was also supported by the Spanish Ministry of Education through M. Arnal-Pastor FPU2009-1870 and M. Perez-Garnes BES-2009-015314 grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engineered 3D bioimplants using elastomeric scaffold, self-assembling peptide hydrogel, and adipose tissue-derived progenitor cells for cardiac regeneration

  • Soler-Botija, Carolina
  • Bago, Juli R.
  • Llucia-Valldeperas, Aida
  • Castells-Sala, Cristina
  • Martinez-Ramos, Cristina
  • Fernandez-Muinos, Teresa
  • Chachques, Juan Carlos
  • Semino, Carlos E.
  • Bayes-Genis, Antoni
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Contractile restoration of myocardial scars remains a challenge with important clinical implications. Here, a combination of porous elastomeric membrane, peptide hydrogel, and subcutaneous adipose tissue-derived progenitor cells (subATDPCs) was designed and evaluated as a bioimplant for cardiac regeneration in a mouse model of myocardial infarction. SubATDPCs were doubly transduced with lentiviral vectors to express bioluminescent-fluorescent reporters driven by constitutively active, cardiac tissue-specific promoters. Cells were seeded into an engineered bioimplant consisting of a scaffold (polycaprolactone methacryloyloxyethyl ester) filled with a peptide hydrogel (PuraMatrix(TM)), and transplanted to cover injured myocardium. Bioluminescence and fluorescence quantifications showed de novo and progressive increases in promoter expression in bioactive implant-treated animals. The bioactive implant was well adapted to the heart, and fully functional vessels traversed the myocardium-bioactive implant interface. Treatment translated into a detectable positive effect on cardiac function, as revealed by echocardiography. Thus, this novel implant is a promising construct for supporting myocardial regeneration., The research leading to these results received funding from the European Union Seventh Framework Programme (Project RECATABI, 7FP/2007-2013) under grant agreement number 229239. This work was also supported by Ministerio de Ciencia e Innovación (SAF2011- 30067-C02-01), Fundació La Marató de TV3 (080330), Red de Terapia Celular-TerCel (RD12/0019/0029), Red Cardio-vascular (RD12/0042/0047), Sociedad Española de Cardiología, and Fundació Privada Daniel Bravo Andreu
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Creating the bioartificial myocardium for cardiac repair: challenges and clinical targets

  • Chachques, Juan C.
  • Bayes-Genis, Antoni
  • Semino, Carlos
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] The association of stem cells with tissue-engineered scaffolds constitutes an attractive approach for the repair of myocardial tissue with positive effects to avoid ventricular chamber dilatation, which changes from a natural elliptical to spherical shape in heart failure patients. Biohybrid scaffolds using nanomaterials combined with stem cells emerge as new therapeutic tool for the creation of `bioartificial myocardium¿ and `cardiac wrap bioprostheses¿ for myocardial regeneration and ventricular support. Biohybrids are created introducing stem cells and self-assembling peptide nanofibers inside a porous elastomeric membrane, forming cell niches. Our studies lead to the creation of semi-degradable `ventricular support bioprostheses¿ for adaptative LV and/or RV wrapping, designed with the concept of `helical myocardial bands¿. The goal is to restore LV elliptical shape, and contribute to systolic contraction and diastolic filling (suction mechanism). Cardiac wrapping with ventricular bioprostheses may reduce the risk of heart failure progression and the indication for heart transplantation., The RECATABI PROJECT (Regeneration of Cardiac Tissue Assisted by Bioactive Implants) was financially supported by the 7th Framework Programme (FP7) of the European Commission. The authors have no other relevant affiliations or financial involvement with any organization or entity with a financial interest in or financial conflict with the subject matter or materials discussed in the manuscript. This includes employment, consultancies, honoraria, stock ownership or options, expert testimony, grants or patents received or pending or royalties.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Combining self-assembling peptide gels with three-dimensional elastomer scaffolds

  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Arnal Pastor, María Pilar
  • Martínez Ramos, Cristina
  • Vilariño Feltrer, Guillermo
  • Vikingsson, Line
  • Castells Sala, Carla
  • Semino, Carlos Eduardo
[EN] Some of the problems raised by the combination of porous scaffolds and self-assembling peptide (SAP) gels as constructs for tissue engineering applications are addressed for the first time. Scaffolds of poly(- ethyl acrylate) and the SAP gel RAD16-I were employed. The in situ gelation of the SAP gel inside the pores of the scaffolds was studied. The scaffold-cum-gel constructs were characterized morphologically, physicochemically and mechanically. The possibility of incorporating an active molecule (bovine serum albumin, taken here as a model molecule for others) in the gel within the scaffold’s pores was assessed, and the kinetics of its release in phosphate-buffered saline was followed. Cell seeding and colonization of these constructs were preliminarily studied with L929 fibroblasts and subsequently checked with sheep adipose-tissue-derived stem cells intended for further preclinical studies. Static (conventional) and dynamically assisted seedings were compared for bare scaffolds and the scaffold-cum-gel constructs. The SAP gel inside the pores of the scaffold significantly improved the uniformity and density of cell colonization of the three-dimensional (3-D) structure. These constructs could be of use in different advanced tissue engineering applications, where, apart from a cell-friendly extracellular matrix -like aqueous environment, a larger-scale 3-D structure able to keep the cells in a specific place, give mechanical support and/or conduct spatially the tissue growth could be required., The authors acknowledge funding through the European Commission FP7 project RECATABI (NMP3-SL-2009-229239), and from the Spanish Ministerio de Ciencia e Innovacion through projects MAT2011-28791-C03-02 and -03. Dr. J.C. Chachques (Hopital Europeen Georges Pompidou, Paris) is thanked for providing the ASCs employed in this study. MMP acknowledges support of CIBER-BBN initiative, financed by Institut de Salud Carlos III (Spain) with the assistance of the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Elastomeric cardiopatch scaffold for myocardial repair and ventricular support

  • Chachques, Juan Carlos
  • Lila, Nermine
  • Soler Botija, Carolina
  • Autret, Gwennhael
  • Perier, Marie-Cecile
  • Mirochnik, Nicolas
  • Bayes-Genis, Antoni
  • Semino, Carlos E.
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] OBJECTIVES: Prevention of postischaemic ventricular dilatation progressing towards pathological remodelling is necessary to decrease ventricular wall deterioration. Myocardial tissue engineering may play a therapeutic role due to its capacity to replace the extracellular matrix, thereby creating niches for cell homing. In this experimental animal study, a biomimetic cardiopatch was created with elastomeric scaffolds and nanotechnologies. METHODS: In an experimental animal study in 18 sheep, a cardiopatch was created with adipose tissue-derived progenitor cells seeded into an engineered bioimplant consisting of 3-dimensional bioabsorbable polycaprolactone scaffolds filled with a peptide hydrogel (PuraMatrix (TM)). This patch was then transplanted to cover infarcted myocardium. Non-absorbable poly(ethyl) acrylate polymer scaffolds were used as controls. RESULTS: Fifteen sheep were followed with ultrasound scans at 6 months, including echocardiography scans, tissue Doppler and spectral flow analysis and speckle-tracking imaging, which showed a reduction in longitudinal left ventricular deformation in the cardiopatch-treated group. Magnetic resonance imaging (late gadolinium enhancement) showed reduction of infarct size relative to left ventricular mass in the cardiopatch group versus the controls. Histopathological analysis at 6 months showed that the cardiopatch was fully anchored and integrated to the infarct area with minimal fibrosis interface, thereby promoting angiogenesis and migration of adipose tissue-derived progenitor cells to surrounding tissues. CONCLUSIONS: This study shows the feasibility and effectiveness of a cardiopatch grafted onto myocardial infarction scars in an experimental animal model. This treatment decreased fibrosis, limited infarct scar expansion and reduced postischaemic ventricular deformity. A capillary network developed between our scaffold and the heart. The elastomeric cardiopatch seems to have a positive impact on ventricular remodelling and performance in patients with heart failure., The RECATABI Project (Regeneration of Cardiac Tissue Assisted by Bioactive Implants) was financially supported by the 7th Framework Programme (FP7) of the European Commission. Project ID: 229239. Funded under FP7-NMP and the European Regional Development Fund (FEDER Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Interaction between acrylic substrates and RAD16-I peptide in its self-assembling

  • Arnal Pastor, María Pilar
  • González-Mora, Debora
  • García-Torres, Fernando
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Self-assembling peptides (SAP) are widely used as scaffolds themselves, and recently as fillers of microporous scaffolds, where the former provides a cell-friendly nanoenvironment and the latter improves its mechanical properties. The characterization of the interaction between these short peptides and the scaffold material is crucial to assess the potential of such a combined system. In this work, the interaction between poly(ethyl acrylate) (PEA) and 90/10 ethyl acrylate-acrylic acid copolymer P(EAcoAAc) with the SAP RAD16-I has been followed using a bidimensional simplified model. By means of the techniques of choice (congo red staining, atomic force microscopy (AFM), and contact angle measurements) the interaction and self-assembly of the peptide has proven to be very sensitive to the wettability and electro-negativity of the polymeric substrate., The authors acknowledge funding through the European Commission FP7 project RECATABI (NMP3-SL-2009-229239), and from the Spanish Ministerio de Ciencia e Innovacion through projects MAT2011-28791-C03-02 and -03. This work was also supported by the Spanish Ministerio de Educacion through M. Arnal-Pastor FPU 2009-1870 grant. The authors acknowledge the assistance and advice of Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Grid polymeric scaffolds with polypeptide gel filling as patches for infarcted tissue regeneration

  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vilariño-Feltrer, Guillermo|||0000-0002-3063-3808
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Arnal Pastor, María Pilar
  • Vikingsson, Line
[EN] Scaffolds of poly(ethyl acrylate) (PEA) with interconnected cylindrical orthogonal pores filled with a self-assembling peptide (SAP) gel are here proposed as patches for infarcted tissue regeneration. These combined systems aim to support cell therapy and meet further requirements posed by the application: the three-dimensional architecture of the elastomeric scaffold is expected to lodge the cells of interest in the damaged zone avoiding their death or migration, and at the same time conduct cell behavior and give mechanical support if necessary; the ECM-like polypeptide gel provides a cell-friendly aqueous microenvironment, facilitates diffusion of nutrients and cell wastes and is expected to improve the distribution and viability of the seeded cells within the pores and stimulate angiogenesis., Research supported by the European Comission through the RECATABI FP7 NMP3-SL-2009-229239 project and the spanish Ministerio de Ciencia e Innovación through the MAT2011-28791-C03-02 and -03 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electrospun adherent-antiadherent bilayered membranes based on cross-linked hyaluronic acid for advanced tissue engineering applications

  • Arnal Pastor, María Pilar
  • Perez Garnes, Manuel
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] A procedure to obtain electrospun mats of hyaluronic acid (HA) stable in aqueous media in one single step has been developed. It consists in combining an HA solution with a divinyl sulfone one as cross-linker in a three-way valve to immediately electroblow their mixture. Membranes obtained with this method, after sterilization and conditioning, are ready to use in cell culture without need of any additional posttreatment. HA nanofibers are deposited onto previously electrospun poly(L-lactic acid) (PLLA) mats in order to obtain stably joined bilayered membranes with an adherent face and the opposite face non-adherent, despite their different hydrophilicity and mechanical properties. These bilayered HA/PLLA membranes may be of use, for example, in applications seeking to transplant cells on a tissue surface and keep them protected from the environment: the PLLA nanofiber face is cell friendly and promotes cell attachment and spreading and can thus be used as a cell supply vehicle,. while the HA face hinders cell adhesion and thus may prevent post-surgical adherences, a major issue in many surgeries. (C) 2013 Elsevier B.V. All rights reserved., The authors acknowledge the financing through project FP7 NMP3-SL-2009-229239 "Regeneration of Cardiac Tissue Assisted by Bioactive Implants" (RECATABI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vitro development of bioimplants made up of elastomeric scaffolds with peptide gel filling seeded with human subcutaneous adipose tissue-derived progenitor cells

  • Castells-Sala, Cristina
  • Semino, Carlos
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Myocardial tissue lacks the ability to regenerate itself significantly following a myocardial infarction. Thus, new strategies that could compensate this lack are of high interest. Cardiac tissue engineering (CTE) strategies are a relatively new approach that aims to compensate the tissue loss using combination of biomaterials, cells and bioactive molecules. The goal of the present study was to evaluate cell survival and growth, seeding capacity and cellular phenotype maintenance of subcutaneous adipose tissue-derived progenitor cells in a new synthetic biomaterial scaffold platform. Specifically, here we tested the effect of the RAD16-I peptide gel in microporous poly(ethyl acrylate) polymers using two-dimensional PEA films as controls. Results showed optimal cell adhesion efficiency and growth in the polymers coated with the self-assembling peptide RAD16-I. Importantly, subATDPCs seeded into microporous PEA scaffolds coated with RAD16-I maintained its phenotype and were able to migrate outwards the bioactive patch, hopefully toward the infarcted area once implanted. These data suggest that this bioimplant (scaffold/RAD16-I/cells) can be suitable for further in vivo implantation with the aim to improve the function of affected tissue after myocardial infarction. (c) 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 103A: 3419-3430, 2015., Contract grant sponsor: European Union Seventh Framework Programme; contract grant number: 229239
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrophilic surface modification of acrylate-based biomaterials

  • Arnal Pastor, María Pilar
  • Comín-Cebrián, S.
  • Martínez-Ramos, C.
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Vallés Lluch, Ana|||0000-0002-7896-8666
[EN] Acrylic polymers have proved to be excellent with regard to cell adhesion, colonization and survival, in vitro and in vivo. Highly ordered and regular pore structures thereof can be produced with the help of polyamide templates, which are removed with nitric acid. This treatment converts a fraction of the ethyl acrylate side groups into acrylic acid, turning poly(ethyl acrylate) scaffolds into a more hydrophilic and pH-sensitive substrate, while its good biological performance remains intact. To quantify the extent of such a modification, and be able to characterize the degree of hydrophilicity of poly(ethyl acrylate), poly(ethyl acrylate) was treated with acid for different times (four, nine and 17 days), and compared with poly(acrylic acid) and a 90/10%wt. EA/AAc copolymer (P(EA-co-AAc)). The biological performance was also assessed for samples immersed in acid up to four days and the copolymer, and it was found that the incorporation of acidic units on the material surface was not prejudicial for cells. This surface modification of 3D porous hydrophobic scaffolds makes easier the wetting with culture medium and aqueous solutions in general, and thus represents an advantage in the manageability of the scaffolds., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors acknowledge financing through project FP7 NMP3-SL-2009-229239 'Regeneration of cardiac tissue assisted by bioactive implants' (RECATABI) and projects MAT2011-28791-C03-02 and -03 from the Spanish Ministerio de Ciencia e Innovacion. This work was also supported by the Spanish Ministry of Education through M. Arnal-Pastor FPU AP2009-1870 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Assembly Procedures for Large-Sized Biohybrid Scaffolds as Patches for Myocardial Infarct

  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
  • Moratal, David|||0000-0002-2825-3646
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
  • Rodríguez Pérez, Eduard
  • Perez Garnes, Manuel
  • Chachques, Juan Carlos
[EN] Objective: To assemble a biohybrid cardiac patch consisting of a large (5x5 cm) elastomer scaffold whose pores are filled with a self-assembling peptide (SAP) gel entrapping adipose stem cells, to be used as a novel implant in a big animal model (sheep) of myocardial infarction. The study focuses on the way to determine optimal procedures for incorporating the SAP solution and the cells in the patch to ensure cell colonization and a homogeneous cell distribution in the construct before implantation. The problems associated with the scale-up of the different procedures raised by the large size of the construct are discussed. Materials and Methods: Experiments were performed to choose between different assembling alternatives: incorporation of the SAP gel before cell seeding or simultaneous SAP and cell loading of the scaffold; surface seeding of cells or cell injection into the scaffold pores; dissemination of the cells throughout the scaffold before incubation by gentle shaking or by centrifugation. Immunocytochemistry techniques and confocal and scanning electron microscopies were employed to assess and quantify cell colonization of the material and early cell distribution. Cell concentrations and the uniformity of cellular distribution throughout the scaffold were taken as the main criteria to decide between the different alternative procedures. Results: The combination of peptide preloading, cell injection, and shaking before incubation yielded the best results in terms of greater cell density and the most uniform distribution after 24 h of culture compared with the other methods. These techniques could be scaled-up to obtain large biohybrid cardiac patches with success. Conclusions: The results obtained after the different seeding methods allowed us to establish an effective protocol for the assembly of large biohybrid patches for their subsequent implantation in the heart of a big animal model of myocardial infarct in the context of a preclinical study., The authors acknowledge the financing from the European Commission through the ‘‘Regeneration of cardiac tissue assisted by bioactive implants’’ (RECATABI) FP7 NMP3-SL-2009-229239 project. MMP acknowledges support of Instituto de Salud Carlos III with assistance from the European Regional Development Fund through CIBER-BBN initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New Semi-Biodegradable Materials from Semi-Interpenetrated Networks of Poly(epsilon-caprolactone) and Poly(ethyl acrylate)

  • Lozano Picazo, Paloma
  • Perez Garnes, Manuel
  • Martínez Ramos, C.
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Monleón Pradas, Manuel|||0000-0001-6457-0414
[EN] Semi-degradable materials may have many applications. Here poly(ethyl acrylate) and poly(ϵ-caprolactone) were combined as semi-interpenetrated networks, and thoroughly characterized in terms of final composition, interactions between components, wettability, and mechanical properties. PCL modulates the mechanical properties of the PEA elastomeric network. Cultures of fibroblasts and adipose-tissue derived stem cells showed excellent biological performance of the materials. The results are relevant for applications seeking materials leaving a permanent supporting skeleton after the partial degradation, as in patches for cardiac regeneration or in abdominal wall meshes., The authors acknowledge funding through the European Commission FP7 project RECATABI (NMP3-SL-2009-229239), and from the Spanish Ministerio de Ciencia e Innovacion through projects MAT2011-28791-C03-02 and -03. Dr. J. C. Chachques (Hopital Europeen Georges Pompidou, Paris, France) and Drs. A. Bayes-Genis and C. Soler-Botija (Hospital Germans Trias i Pujol, Badalona, Spain) are thanked for kindly providing and expanding the ASCs employed in this study.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Electrical stimulation of cardiac adipose tissue-derived progenitor cells modulates cell phenotype and genetic machinery

  • Llucia Valldeperes, A.
  • Sanchez, B.
  • Soler Botija, Carolina
  • Gálvez Montón, Carolina
  • Prat Vidal, Cristina
  • Roura, Santiago
  • Rosell Ferrer, Francisco Javier|||0000-0002-9691-328X
  • Bragós Bardia, Ramon|||0000-0002-1373-1588
  • Bayés Genis, Antoni
A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. Our aim was to examine the effect of electrical stimulation on the cardiodifferentiation potential of cardiac adipose tissue-derived progenitor cells (cardiac ATDPCs). Three different electrical stimulation protocols were tested; the selected protocol consisted of 2ms monophasic square-wave pulses of 50mV/cm at 1Hz over 14days. Cardiac and subcutaneous ATDPCs were grown on biocompatible patterned surfaces. Cardiomyogenic differentiation was examined by real-time PCR and immunocytofluorescence. In cardiac ATDPCs, MEF2A and GATA-4 were significantly upregulated at day 14 after stimulation, while subcutaneous ATDPCs only exhibited increased Cx43 expression. In response to electrical stimulation, cardiac ATDPCs elongated, and both cardiac and subcutaneous ATDPCs became aligned following the linear surface pattern of the construct. Cardiac ATDPC length increased by 11.3%, while subcutaneous ATDPC length diminished by 11.2% (p=0.013 and p=0.030 vs unstimulated controls, respectively). Compared to controls, electrostimulated cells became aligned better to the patterned surfaces when the pattern was perpendicular to the electric field (89.71±28.47o for cardiac ATDPCs and 92.15±15.21o for subcutaneous ATDPCs). Electrical stimulation of cardiac ATDPCs caused changes in cell phenotype and genetic machinery, making them more suitable for cardiac regeneration approaches. Thus, it seems advisable to use electrical cell training before delivery as a cell suspension or within engineered tissue., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Physiological conditioning by electric field stimulation promotes cardiomyogenic gene expression in human cardiomyocyte progenitor cells

  • Llucía Valldeperas, Aida
  • Sánchez Terrones, Benjamin
  • Soler Botija, Carolina
  • Gálvez Montón, Carolina
  • Roura, Santiago
  • Prat Vidal, Cristina
  • Perea Gil, Isaac
  • Rosell Ferrer, Francisco Javier|||0000-0002-9691-328X
  • Bragós Bardia, Ramon|||0000-0002-1373-1588
  • Bayés-Genís, Antoni
The optimal cell lineage for cardiac-regeneration approaches remains mysterious. Additionally, electrical stimulation promotes cardiomyogenic differentiation of stimulated cells. Therefore, we hypothesized that electrical conditioning of cardiomyocyte progenitor cells (CMPCs) might enrich their cardiovascular potential. CMPCs were isolated from human adult atrial appendages, characterized, and electrically stimulated for 7 and 14 days. Electrical stimulation modulated CMPCs gene and protein expression, increasing all cardiac markers. GATA-binding protein 4 (GATA4) early transcription factor was significantly overexpressed (P = 0.008), but also its coactivator myocyte enhancer factor 2A (MEF2A) was upregulated (P = 0.073) under electrical stimulation. Moreover, important structural proteins and calcium handling-related genes were enhanced. The cardioregeneration capability of CMPCs is improved by electrical field stimulation. Consequently, short-term electrical stimulation should be a valid biophysical approach to modify cardiac progenitor cells toward a cardiogenic phenotype, and can be incorporated into transdifferentiation protocols. Electrostimulated CMPCs may be best-equipped cells for myocardial integration after implantation., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Electrical stimulation of cardiac adipose tissue-derived progenitor cells modulates cell phenotype and genetic machinery

  • Llucia Valldeperes, A.
  • Sanchez, B.
  • Soler Botija, Carolina
  • Gálvez Montón, Carolina
  • Prat Vidal, Cristina
  • Roura, Santiago
  • Rosell Ferrer, Francisco Javier
  • Bragós Bardia, Ramon
  • Bayés Genis, Antoni
A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. Our aim was to examine the effect of electrical stimulation on the cardiodifferentiation potential of cardiac adipose tissue-derived progenitor cells (cardiac ATDPCs). Three different electrical stimulation protocols were tested; the selected protocol consisted of 2ms monophasic square-wave pulses of 50mV/cm at 1Hz over 14days. Cardiac and subcutaneous ATDPCs were grown on biocompatible patterned surfaces. Cardiomyogenic differentiation was examined by real-time PCR and immunocytofluorescence. In cardiac ATDPCs, MEF2A and GATA-4 were significantly upregulated at day 14 after stimulation, while subcutaneous ATDPCs only exhibited increased Cx43 expression. In response to electrical stimulation, cardiac ATDPCs elongated, and both cardiac and subcutaneous ATDPCs became aligned following the linear surface pattern of the construct. Cardiac ATDPC length increased by 11.3%, while subcutaneous ATDPC length diminished by 11.2% (p=0.013 and p=0.030 vs unstimulated controls, respectively). Compared to controls, electrostimulated cells became aligned better to the patterned surfaces when the pattern was perpendicular to the electric field (89.71±28.47o for cardiac ATDPCs and 92.15±15.21o for subcutaneous ATDPCs). Electrical stimulation of cardiac ATDPCs caused changes in cell phenotype and genetic machinery, making them more suitable for cardiac regeneration approaches. Thus, it seems advisable to use electrical cell training before delivery as a cell suspension or within engineered tissue., Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Physiological conditioning by electric field stimulation promotes cardiomyogenic gene expression in human cardiomyocyte progenitor cells

  • Llucía Valldeperas, Aida
  • Sánchez Terrones, Benjamin
  • Soler Botija, Carolina
  • Gálvez Montón, Carolina
  • Roura, Santiago
  • Prat Vidal, Cristina
  • Perea Gil, Isaac
  • Rosell Ferrer, Francisco Javier
  • Bragós Bardia, Ramon
  • Bayés-Genís, Antoni
The optimal cell lineage for cardiac-regeneration approaches remains mysterious. Additionally, electrical stimulation promotes cardiomyogenic differentiation of stimulated cells. Therefore, we hypothesized that electrical conditioning of cardiomyocyte progenitor cells (CMPCs) might enrich their cardiovascular potential. CMPCs were isolated from human adult atrial appendages, characterized, and electrically stimulated for 7 and 14 days. Electrical stimulation modulated CMPCs gene and protein expression, increasing all cardiac markers. GATA-binding protein 4 (GATA4) early transcription factor was significantly overexpressed (P = 0.008), but also its coactivator myocyte enhancer factor 2A (MEF2A) was upregulated (P = 0.073) under electrical stimulation. Moreover, important structural proteins and calcium handling-related genes were enhanced. The cardioregeneration capability of CMPCs is improved by electrical field stimulation. Consequently, short-term electrical stimulation should be a valid biophysical approach to modify cardiac progenitor cells toward a cardiogenic phenotype, and can be incorporated into transdifferentiation protocols. Electrostimulated CMPCs may be best-equipped cells for myocardial integration after implantation., Peer Reviewed, Postprint (published version)