Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the combustion process, pollutant emissions and efficiency of an innovative 2-stroke HSDI engine designed for automotive applications

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • De Lima Moradell, Daniela Andreina
  • Tribotte, Pascal
  • Quechon, Nicolas
  • Obernesser, Philippe
  • Dugue, Vincent
[EN] On the last years engine researchers has been focused on improving engine efficiency in order to decrease CO2 emissions and fuel consumption, while fulfilling the increasingly stringent pollutant emissions regulations. In this framework, engine downsizing arises as a promising solution, and 2-stroke cycle operation offers the possibility of reducing the number of cylinders without incurring in NVH penalties. An experimental investigation has been performed to evaluate the performance of a newly-designed poppet valves 2-stroke engine, in terms of finding the proper in-cylinder conditions to fulfill the emission limits in terms of NOx and soot, keeping competitive fuel consumption levels. Moreover, present research work aims to improve the existing knowledge about the gas exchange processes in a 2-stroke engine with poppet valves architecture, and its impact over the combustion conditions, final exhaust emissions levels and engine efficiency. The experimental results confirm how this engine architecture presents high flexibility in terms of air management control to substantially affect the in-cylinder conditions. The in-cylinder oxygen concentration and density, which are the product of a given trapping ratio and delivered mass flow, were linked to pollutant emissions and performance by their impact on instantaneous adiabatic flame temperature and spray mixing conditions. After the optimization process, it was possible to minimize simultaneously NOx, soot and indicated fuel consumption, without observing a critical trade-off between the pollutant emissions and the fuel consumption. (C) 2013 Elsevier Ltd. All rights reserved., This research has been sponsored by the European Union in framework of the POWERFUL project, seventh framework program FP7/2007-2013, theme 7, sustainable surface transport, grant agreement No. SCP8-GA-2009-234032. The authors gratefully appreciate this support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Determination of the resonance response in an engine cylinder with a bowl-in-piston geometry by the finite element method for inferring the trapped mass

  • Broatch, A.|||0000-0001-9991-1039
  • Guardiola, Carlos|||0000-0002-3150-8566
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • F. D. Denia|||0000-0003-4536-8610
[EN] Cylinder resonance phenomenon in reciprocating engines consists of high-frequency pressure oscillations excited by the combustion. The frequency of these oscillations is proportional to the speed of sound on pent-roof combustion chambers and henceforth the resonance frequency can be used to estimate the trapped mass, but in bowl-in-piston chambers a geometrical factor must be added in order to deal with the bowl disturbance. This paper applies the finite element method (FEM) to provide a resonance calibration for new design combustion chambers, which are commonly dominated by the bowl geometry near the top dead centre. The resonance calibration does not need any sensor information when it is solved by a FEM procedure, and consequently, is free from measurement errors. The calibration is proven to be independent of the chamber conditions and the results obtained are compared with experimental data by using spectral techniques and measuring precisely the trapped mass.[EN], This research has been partially supported by the European Union in framework of the POWERFUL project, seventh framework program FP7/2007-2013, theme 7, sustainable surface transport (grant agreement number SCP8-GA-2009-234032).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of combustion concepts in a newly designed two-stroke high-speed direct injection compression ignition engine

  • Benajes, Jesús|||0000-0002-1653-9188
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • De Lima Moradell, Daniela Andreina
  • Tribotté, Pascal
[EN] Two research paths are being followed to develop compression ignition engines, the extreme optimization of the conventional diesel combustion concept and the development of alternative combustion concepts. The optimization of the conventional diesel combustion concept focuses on controlling the combustion development in an attempt to improve pollutant emissions and efficiency. Additionally, extensive research in four-stroke engines already demonstrated the benefits of the partially premixed combustion concept in terms of emissions and efficiency when using high volatility and low reactivity fuels, such as gasoline-like fuels, from medium-to-high engine loads. A detailed optimization of the conventional diesel combustion concept has been performed in an innovative two-stroke poppet valves high speed direct injection compression ignition engine, in order to find the real limits of this engine configuration. Later, its compatibility with the partially premixed combustion concept using a high octane fuel (Research Octane Number 95) with a triple injection strategy for reducing pollutant emissions at medium-to-low load conditions has been evaluated considering also the impact on engine efficiency. Results confirm the potential for attaining state-of-the-art emission levels operating with diesel combustion, and how emissions and efficiency can be optimized by adjusting the air management settings without facing any additional trade-off aside from that usual between NOX and soot. The feasibility of combining this engine configuration with the gasoline partially premixed combustion concept for controlling pollutant emissions has been also corroborated and, with a fine tuned triple injection strategy, engine efficiency even improves compared to that obtained operating with well-optimized diesel combustion., This research has been partially sponsored by the European Union in framework of the POWERFUL project, FP7/2007-2013, theme 7, sustainable surface transport, grant agreement no. SCP8-GA-2009-234032.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Friction and wear of a piston ring/cylinder liner at the top dead centre: experimental study and modelling

  • Zabala, B.
  • Igartua, A.
  • Fernández, Xana
  • Priestner, C.
  • Ofner, H.
  • Knaus, O.
  • Abramczuk, M.
  • Tribotte, P.
  • Girot, F.
  • Román García, Elisa Leonor
  • Nevshupa, Roman
Wear assessment of critical components subjected to relative sliding is a key factor for the development of advanced materials and surface treatments in automotive industry. Simulation of wear process of the engine components is considered as a good alternative for experimental testing which is costly and time-consuming, but it requires a reliable experimental data for model fine-tuning. Therefore, friction and wear of cylinder liner against a piston ring were experimentally studied in simulated laboratory tests. The parameters which were controlled in these tests included oil type, lubrication starvation, surface finishing and surface coatings. The obtained experimental data were fed into a specific simulation model (AVL Excite-Power Unit). Comparison of experimental and simulated results yielded the error below 5%., The authors acknowledge the European Commission for funding of the European Project “Powerful” under Contract 234032.