RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication
Artículo científico (JournalArticle)
Virtues and Vices of an Organic Dye and Ti-Doped MCM-41 Based Dye-Sensitized Solar Cells
[EN] We report on femtosecond to millisecond (fs-ms) studies of the interactions
of an e¿cient triphenylamine organic dye (TPC1) for photovoltaics with titanium-doped
high porous MCM-41 (TiMCM-41) silicate materials in half and complete dye-sensitized
solar cells (DSSCs). Stationary UV visible absorption results indicate a higher dye loading
(3 5 times) per Ti atom in the TiMCM-41-based solar cells in comparison with those
based on typical titania nanoparticles (NPs). However, the dye loading per Ti atom
decreases with increasing the Ti doping, and the total dye content is still smaller in the
TiMCM-41 solar cells than in the NP ones. Time-resolved emission studies showed that the
average electron injection times (from TPC1 to the titania conduction band) are about
2.5 times longer for the TiMCM-41 solar cells (12 ps) than using the classical titania NP
ones (4.5 ps). However, taking into account the slow internal deactivation of the dye in both
materials, the yield of electron injection is >90%. Nanosecond to millisecond (ns-ms) ¿ash photolysis studies of ¿lms show that the
(back) electron recombination from titania to the dye cation is slower using TiMCM-41 than that in the titania NPs (19¿s vs 7¿s).
Similar experiments for complete solar cells indicate faster dye regeneration due to the electrolyte in the TiMCM-41 than in the
titania NP devices (3¿s vs 8¿s). Therefore, from the point of view of interfacial charge separation, the results indicate comparable or
even better performance of the TiMCM-41 than the typical titania nanoparticle. However, the solar cell performance and the total
e¿ciency are much lower in the TiMCM-41 than in the NP devices. Additionally, the values of short-circuit current per Ti atom are
higher for the NP devices, despite the higher dye content per Ti atom in TiMCM-41 samples. This suggests a strong limitation in the
electron transport process along the TiMCM-41 channels. Hence, despite the promising interfacial properties observed in fast and
ultrafast time scales, this kind of material needs further modi¿cation in terms of improving the total dye loading and the conductivity,
in order to be suitable for DSSCs., The research leading to these results has received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 235286 (NANOSOL). This work was also supported by the MICINN through projects MAT2008-01609 and Consolider-Ingenio 2010 (CDS2009-00050). We thank Prof. Licheng Sun and Dr. Xichuan Yang for giving us the TPC1 dye, and Pedro Atienzar for his help in the preparation of solar cells. C.M. thanks the MEC for the Ph.D. fellowship, and B.C. thanks MICINN for the Ramon y Cajal fellowship.