Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Acoustic noise reduction methods for the launch pad

  • Herrero Durá, Iván
[ES] Los niveles de presión acústica experimentados por las naves espaciales y las lanzaderas durante las fases iniciales del lanzamiento (ignición de motores y despegue) pueden ser muy significativos para estructuras ligeras y cargas externas y apéndices, como paneles solares y antenas. En este contexto, el fondo del canal de evacuación de gases actúa como un espejo desde el punto de vista acústico, y devuelve la energía liberada directamente al cohete y a las estructuras que transporta. Esta gran cantidad de energía puede poner en riesgo algunas misiones de lanzamiento, con las consecuencias económicas y de seguridad que ello conlleva. A pesar de esto, existe todavía poco conocimiento sobre las características de las fuentes y el comportamiento de las instalaciones de suelo en referencia a la dispersión, difusión y absorción del sonido. En este contexto se desarrollará el objetivo principal de esta Tesis, cuyo propósito es el diseño y optimización de un prototipo de sistema basado en un array de resonadores de Helmholtz para maximizar la absorción y dispersión del sonido y, por tanto, mitigar los niveles de presión sonora generados en estos eventos en el contexto aeroespacial. Los trabajos de esta Tesis se llevan a cabo en el marco del contrato Networking/Partnership Initiative de la Agencia Espacial Europea., [CA] Els nivells de pressió acústica experimentats pels vehicles espacials durant les fases inicials del llançament (ignició de motors i enlairament) són extremadament elevats i poden afectar significativament a estructures lleugeres transportades, com panells solars i antenes. L'intens soroll generat per les fonts primàries, el motor i el raig, es veu reforçat per la reflexió en el fons del canal d'evacuació de gasos, que actua com un mirall des del punt de vista acústic, i retorna l'energia alliberada directament al coet i a les estructures que transporta. Aquesta gran quantitat d'energia pot posar en risc algunes missions de llançament, amb les conseqüències econòmiques i de seguretat que això comporta. Tot i la rellevància d'aquest problema, el coneixement sobre les característiques de les fonts, el comportament de les instal·lacions de sòl en referència a la dispersió, difusió i absorció del so, i les possibles mesures per mitigar l'impacte és encara escàs. En aquest context es desenvoluparà l'objectiu principal d'aquesta Tesi, el propòsit de la qual és el disseny i optimització d'un prototip de sistema basat en una matriu de ressonadors de Helmholtz per maximitzar l'absorció i dispersió del so a nivell de terra i, d'aquesta manera, mitigar els nivells de pressió sonora generats en aquests esdeveniments en el context aeroespacial. Els treballs d'aquesta Tesi s'han dut a terme en el marc del contracte Networking/Partnership Initiative 441-2015 de l'Agència Espacial Europea., [EN] The sound pressure levels experienced by space vehicles during the initial stages of launch (engine ignition and lift-off) are extremely high and can significantly affect light transported structures, such as solar panels and antennas. The intense sound generated by the primary sources, the engine and the jet, is reinforced by the reflection at the bottom of the gas evacuation channel, which acts as a mirror from the acoustic point of view, and returns the energy released directly to the rocket and the structures it carries. This large amount of energy can put some launch missions at risk, with the economic and security consequences that this entails. Despite the relevance of this problem, knowledge about the characteristics of the sources, the behavior of ground facilities in reference to the dispersion, diffusion and absorption of sound, and the possible measures to mitigate the impact is still scarce. In this context, the main objective of this thesis will be developed. The purpose of this work is the design and optimization of a prototype system based on an array of Helmholtz resonators to maximize the absorption and dispersion of sound at ground level and, in this way, mitigate the sound pressure levels generated in these events in the aerospace context. The work of this thesis has been carried out within the framework of the Networking/Partnership Initiative contract 441-2015 of the European Space Agency., None of the work presented here could have been possible without the funding provided by the European Space Agency. In this institution, I want to specially thank Julián Santiago (who sadly passed away in December 2018) and Ivan Ngan, both from the Structures, Mechanisms and Materials Division, for their help to make this project possible.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound absorption and diffusion by 2D arrays of Helmholtz resonators

  • Herrero-Durá, Iván
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Romero-García, Vicente|||0000-0002-3798-6454
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
[EN] We report a theoretical and experimental study of an array of Helmholtz resonators optimized to achieve both efficient sound absorption and diffusion. The analysis starts with a simplified 1D model where the plane wave approximation is used to design an array of resonators showing perfect absorption for a targeted range of frequencies. The absorption is optimized by tuning the geometry of the resonators, i.e., by tuning the viscothermal losses of each element. Experiments with the 1D array were performed in an impedance tube. The designed system is extended to 2D by periodically replicating the 1D array. The 2D system has been numerically modeled and experimentally tested in an anechoic chamber. It preserves the absorption properties of the 1D system and introduces efficient diffusion at higher frequencies due to the joint effect of resonances and multiple scattering inside the discrete 2D structure. The combined effect of sound absorption at low frequencies and sound diffusion at higher frequencies, may play a relevant role in the design of noise reduction systems for different applications., This research was funded by the European Space Agency under the Networking/Partnering Initiative (NPI) contract number 441-2015. In memoriam to Julián Santiago-Prowald, Senior Advisor for the Structures, Mechanisms and Materials Division of ESA, a great man that always gave us his tireless support. AC acknowledges financial support from Generalitat Valenciana through the grant APOSTD/2018/229. VRG acknowledges the financial support from RFI Le Mans Acoustique (Région Pays de la Loire) in the framework of the project HYPERMETA funded under the program Étoiles Montantes of the Région Pays de la Loire. Authors acknowledge the support of the European Space Agency under contract 441-2015 Co- Sponsored PhD ¿Acoustic Reduction Methods for the Launch Pad¿ and project TRP ESA AO/1-9479/18/NL/LvH ¿Launch Sound Level Reduction¿. This article is based upon work from COST Action DENORMS CA15125, supported by COST (European Cooperation in Science and Technology).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Absorción sonora en cristales de sonido: aplicación en el lanzamiento de cohetes espaciales

  • Herrero Durá, Iván
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Romero-García, Vicente|||0000-0002-3798-6454
[EN] The high acoustic pressure levels experienced by spacecrafts and launchers during the lift-off are due, among other factors, to the reflection of the sound waves in the launch pad. We propose in this work the use of sonic crystals in the launch pad, with the aim of reducing the effect of vibrations induced by the shock wave generated during the lift-off of the space vehicle. The effect of viscothermal losses in sonic crystals in sound absorption during the first stages of the rocket launch is studied. For this purpose, this kind of losses are modelled considering the sonic crystal as a rigid perforated panel and proposing an specific configuration for its placement in the launch pad., [ES] Los elevados niveles de presión acústica experimentados por cohetes espaciales y lanzaderas durante el despegue son debidos, entre otros factores, a la reflexión de las ondas de sonido en la plataforma de lanzamiento. Se propone el uso de cristales de sonido en la base de lanzamiento para reducir el efecto de las vibraciones inducidas por la onda de choque generada en el despegue del vehículo espacial. En este trabajo se estudia el efecto de las pérdidas viscotérmicas en cristales de sonido en la absorción del sonido durante las primeras fases del lanzamiento de cohetes espaciales. Para ello, se modelan este tipo de pérdidas considerando el cristal de sonido como un panel rígido perforado y proponiendo una configuración específica para su ubicación en la base de lanzamiento., Los autores agradecen el apoyo de European Space Agency (ESA) a través del doctorando cofinanciado 441- 2015 «Acoustic Noise Reduction Methods for the Launch Pad», el Ministerio de Economía y Competitividad a través del Proyecto Coordinado «Ondas de luz y sonido en cristales, medios estructurados y metamateriales», y la Conselleria de Educación, Investigación, Cultura y Deporte a través del Proyecto AICO/2016/060.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Broadband reduction of the specular reflections by using sonic crystals: A proof of concept for noise mitigation in aerospace applications

  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Redondo, Javier|||0000-0002-5507-7799
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Salmerón-Contreras, L.J.
  • Herrero-Durá, Iván
  • Staliunas, Kestutis
  • Adkins, N.J.
[EN] The broadband reduction of the specular reflections by sonic crystals (SCs) is theoretically and experimentally reported in this work. The analysed system consists of a sound source radiating a SC made of acoustically rigid scatterers embedded in water partially covering an open cavity. By comparison with a reference flat reflector, we observe that reflected waves spread in space as a consequence of the spatially modulated properties of the SC. Moreover, due to the different working frequency ranges of the SC a significant noise reduction is produced in a broadband region. Therefore, due to the spreading of the reflected waves, the system produces a broadband noise reduction in the area of the source. In particular, the noise reduction is close to 2 dB for the two octaves emitted by our source, which represents a decrease of 37% of the acoustic energy. The results shown in this work constitute a proof of concept for the use of SCs as broadband-noise reduction systems at the launch pad. An approach to the geometry of the Vega launch vehicle the European Space Agency is proposed and the limitations of the study are discussed. (C) 2017 Elsevier Masson SAS. All rights reserved., Authors acknowledge the support of the European Space Agency under contract "Sonic Crystals For Noise Reduction At The Launch Pad", ESA ITT 1-7094 (ITI) and the 441-2015 Co-Sponsored PhD "Acoustic Reduction Methods for the Launch Pad". The work was supported by Spanish Ministry of Economy and Innovation (MINECO) and European Union FEDER through project FIS2015-65998-C2-1 and FIS2015-65998-C2-2.