Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and computational model approach to assess the photothermal effects in transparent nanocrystalline yttria stabilized zirconia cranial implant

  • Cano-Velázquez, Mildred S.
  • Llamazares, M.
  • Camacho-López, Santiago
  • Aguilar, Guillermo
  • Hernández-Cordero, Juan
  • Bon Corbín, José|||0000-0002-0457-9705
  • Trujillo Guillen, Macarena|||0000-0003-4145-2188
[EN] Background and objective: In the last few years, we have been exploring the use of transparent nanocrystalline yttria-stabilized zirconia (nc-YSZ) ceramics as a biomedical transparent cranial implant, referred as the "Window to the Brain " (WttB). The WttB aims at providing chronical optical access to the brain for diagnostics and therapeutic procedures and it has shown to provide an effective means to obtain enhanced results from optical imaging techniques. The objective of this work is to explore the photothermal effects of the Wttb produced when it is irradiated by a laser source. Methods: We make experimental and computer models. The thermal effects of laser irradiation on the nc-YSZ samples were evaluated upon registering the induced temperature changes by means of thermal imaging. The computer models try to mimic the experimental models using a similar geometry, reproducing the physical situation by a couple thermal-optical problem and adjusting the main parameters from the experimental results. Results: Experimental and computational coincides in results: Temperatures at the bottom surface of the implant does not exceed those which produce thermal damage. The quantitative comparison between experimental and computational models show that differences in results are under a reasonable value of 5% and qualitatively we observe a similar behavior. The results provide optimum values for the thermal optical nc-YSZ parameters considering a linear and exponential relationship with temperature for the absorption coefficient: The thermal conductivity is k = 2.13 W/mmiddotK and the absorption coefficient alpha varies from 426 to 526 m(-1) with the linear relationship, and k = 2.04 W/mmiddotK and alpha is an element of [433,502] m(-1) with the exponential. The reflection coefficient is R = 19% in both cases. Conclusions: The temperatures achieved in the nc-YSZ during the laser irradiation are suitable for biomedical applications. The combination of experimental and computational models contributes to build a clinically oriented model with the thermal-optical parameters values stablished and to determine their influence in results. Specifically, the absorption coefficient of the nc-YSZ samples is the most influent parameter in the obtained temperatures. Moreover, this combination provides a method to evaluate the relevant thermal-optical parameters of nc-YSZ samples obtained with different manufacturing processes., This work was supported by the Spanish Ministerio de Ciencia, Innovacion y Universidades under "Programa Estatal de I + D + I Orientada a los Retos de la Sociedad", Grant No. "RTI2018- 094357-B-C21". The WttB project is being funded by NSF through grants NSF-PIRE 1545852, NSF-EAGER 1547014 and by CONACYT (Mexico) through FORDECyT-PRONACES, Grant 246648. M.S.C.V. acknowledges support from "Beca Mixta, Grant 741249" (CONACYT, Mexico) .
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Structural, optical, and electrical characterization of TiO2-doped yttria-stabilized zirconia electrolytes grown by atomic layer deposition

  • Vázquez, Jorge Luis
  • Bahrami, Amin
  • Bohórquez, Carolina
  • Blanco Ollero, Eduardo
  • Domínguez de la Vega, Manuel
  • Soto, Gerardo
  • Nielsch, K.
  • Tiznado, Hugo
Electrolyte material optimization is crucial for electrochemical energy storage devices. The specific composition and structure have an impact on conductivity and stability, both of which are essential for efficient device performance. The effects of controlled incorporation of TiO2 into a Yttria-Stabilized Zirconia (YSZ) electrolyte using the atomic layer deposition (ALD) technique are investigated in this study. The surface chemical composition analysis reveals variations in the Ti oxidation state and a decrease in the O/(Zr + Y + Ti) ratio as TiO2 concentration increases. The formation of acceptor states near the valence band is proposed to reduce the bandgap with the Fermi level. The structural properties indicate that as TiO2 concentration increases, surface homogeneity and crystallite size increase. The contact angle with water indicates a hydrophobic behavior influenced by surface morphology and potential oxygen vacancies. Finally, electrical properties, measured in Ru/TiO2-doped YSZ/Au capacitors operated at temperatures between 100 and 170 °C, showed that the TiO2 incorporation improved the ionic conductivity, decreased the activation energy for conductivity, and improved the capacitance of the cells. This study highlights the importance of the ALD technique in solid-state electrolyte engineering for specific applications, such as energy storage devices.
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Volumetric temperature mapping using light-sheet microscopy and upconversion fluorescence from micro- and nano-rare earth composites

  • Barron Ortiz, Dannaceli
  • Cadena Nava, Rubén D.
  • Pérez Parets, Enric
  • Licea Rodriguez, Jacob
  • Gualda Manzano, Emilio José|||0000-0001-5948-5493
  • Hernández Cordero, Juan
  • Loza Álvarez, Pablo
  • Rocha Mendoza, Israel
We present a combination of light-sheet excitation and two-dimensional fluorescence intensity ratio (FIR) measurements as a simple and promising technique for three-dimensional temperature mapping. The feasibility of this approach is demonstrated with samples fabricated with sodium yttrium fluoride nanoparticles co-doped with rare-earth ytterbium and erbium ions (NaYF4:Yb3+/Er3+) incorporated into polydimethylsiloxane (PDMS) as a host material. In addition, we also evaluate the technique using lipid-coated NaYF4:Yb3+/Er3+ nanoparticles immersed in agar. The composite materials show upconverted (UC) fluorescence bands when excited by a 980 nm near-infrared laser light-sheet. Using a single CMOS camera and a pair of interferometric optical filters to specifically image the two thermally-coupled bands (at 525 and 550 nm), the two-dimensional FIR and, hence, the temperature map can be readily obtained. The proposed method can take optically sectioned (confocal-like) images with good optical resolution over relatively large samples (up to the millimetric scale) for further 3D temperature reconstruction., This research was partially funded by CONAHCYT (Mexico) through APY CIENCIA FROTN-2 (grant no. 317184) and FORDECyT-PRONACES (Grant No. 246648). This work re- ceived funding from LASERLAB-EUROPE (the European Union’s Horizon 2020 research and innovation program under grant agreement no. 871124) and was partially funded by CEX2019- 000910-S [MCIN/ AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, Generalitat de Catalunya through CERCA, and the Digital Retina project (PID2021-122807OB-C31) funded by MCIN /AEI /10.13039/501100011033/FEDER, UE
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Volumetric temperature mapping using light-sheet microscopy and upconversion fluorescence from micro- and nano-rare earth composites

  • Barron Ortiz, Dannaceli
  • Cadena Nava, Rubén D.
  • Pérez Parets, Enric
  • Licea Rodriguez, Jacob
  • Gualda Manzano, Emilio José
  • Hernández Cordero, Juan
  • Loza Álvarez, Pablo
  • Rocha Mendoza, Israel
We present a combination of light-sheet excitation and two-dimensional fluorescence intensity ratio (FIR) measurements as a simple and promising technique for three-dimensional temperature mapping. The feasibility of this approach is demonstrated with samples fabricated with sodium yttrium fluoride nanoparticles co-doped with rare-earth ytterbium and erbium ions (NaYF4:Yb3+/Er3+) incorporated into polydimethylsiloxane (PDMS) as a host material. In addition, we also evaluate the technique using lipid-coated NaYF4:Yb3+/Er3+ nanoparticles immersed in agar. The composite materials show upconverted (UC) fluorescence bands when excited by a 980 nm near-infrared laser light-sheet. Using a single CMOS camera and a pair of interferometric optical filters to specifically image the two thermally-coupled bands (at 525 and 550 nm), the two-dimensional FIR and, hence, the temperature map can be readily obtained. The proposed method can take optically sectioned (confocal-like) images with good optical resolution over relatively large samples (up to the millimetric scale) for further 3D temperature reconstruction., This research was partially funded by CONAHCYT (Mexico) through APY CIENCIA FROTN-2 (grant no. 317184) and FORDECyT-PRONACES (Grant No. 246648). This work re- ceived funding from LASERLAB-EUROPE (the European Union’s Horizon 2020 research and innovation program under grant agreement no. 871124) and was partially funded by CEX2019- 000910-S [MCIN/ AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, Generalitat de Catalunya through CERCA, and the Digital Retina project (PID2021-122807OB-C31) funded by MCIN /AEI /10.13039/501100011033/FEDER, UE, Postprint (published version)