Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetite nanoparticles with aminomethylenephosphonic groups: synthesis, characterization and uptake of europium(III) ions from aqueous media

  • Kostenko, Liudmyla
  • Kobylinska, Natalia
  • Khainakov, Sergei
  • García-Granda, Santiago
Two adsorbents with covalently bound aminomethylenephosphonic acid functions (and referred to as MNPs/AMPA and MNPs/SiO2-AMPA) were synthesized from two types of amino-functionalized magnetic nanoparticles (MNPs) via Moedritzer-Irani reaction. The sorbents with anchored dopamine ligand (MNPs/dopa) or aminopropyl groups (MNPs/SiO2-NH2), and the MNPs/AMPA were characterized by X-ray diffraction, FTIR, transmission electron microscopy and vibrating sample magnetometry. Surface modification does not adversely impact the physical properties of the starting magnetite. Compared to the size of the unmodified Fe3O4 (magnetite) nanoparticles (7–12 nm), the average size of functionalized nanoparticles is increased to 10–16 nm. Similarly, the magnetic saturation decreased from 67.5 emu g-1 to 42.0 emu g−1, and the surface area is increased up to 205 m2 g−1 for MNPs/SiO2-AMPA. The kinetics of the adsorption of Eu(III) on the sorbent is ultra-fast, and equilibria are attained within 5–10 min at room temperature. The adsorption kinetics can be described by a pseudo-second-order model. Adsorption and desorption conditions were tested with respect to the removal of Eu(III) ions from water solution. The adsorption capacities for Eu(III) at pH 7.0 are 77 mg g−1 and 69 mg g−1 for MNPs/AMPA and MNPs/SiO2-AMPA nanoparticles, respectively. Eu(III) was quantified by ICP-MS. The limit of detection (LOD) for Eu(III) is 0.05 ng L−1 (based on the 3σ criterion), with an enrichment factor of 150. The selectivity over ions such as Tb(III), Fe(III), Zn(II), Cu(II), and Ca(II) ions was studied. Under optimal condition the distribution coefficient for Eu(III) relative to these ions is near 105 mL g−1. The sorbents can be easily retrieved from even large volumes of aqueous solutions by magnetic separations. The method was tested for spiked water samples (with recoveries from 96.6–102.5%) and for rock minerals., Financial support was provided by Ministry of Economy and Competitiveness (MINECO, Spain) MAT2016-78155-C2-1-R and EU (FP-7-PEOPLE-2009-IRSES grant No. 247603).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Advanced core-shell EDTA-functionalized magnetite nanoparticles for rapid and efficient magnetic solid phase extraction of heavy metals from water samples prior to the multi-element determination by ICP-OES

  • Kobylinska, Natalia
  • Kostenko, Liudmyla
  • Khainakov, Sergei
  • García-Granda, Santiago
A method for preconcentration and simultaneous determination of trace heavy metals in water media by core-shell superparamagnetic nanoparticles with the immobilized derivative of ethylenediaminetriacetic acid (referred to as MNPs/SiO2-EDTA) is proposed. The specific layer-by-layer covering of magnetite endowed the new material with essentially increased chemical stability of MNPs including acidic media and improved the affinity toward traces of toxic metal ions. The initial and modified materials were characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, elemental analysis, and vibrating sample magnetometry. The obtained particles were nanodimensional with a 7–12-nm magnetic core and a 4–6-nm silica shell. The MNPs/SiO2-EDTA quantitatively removes heavy metals from contaminated media at pH ≥ 3.5 within 15 min. The adsorption data were successfully fitted to the pseudo-second-order kinetic model. The preconcentration factor was 150 and maximum adsorption capacity was 36.9 mg g−1 for Cu(II), 108.8 mg g−1 for Pb(II), 30.9 mg g−1 for Zn(II), 34.32 mg g−1 for Cr(III), and 59.5 mg g−1 for Cd(II). Due to high stability in the wide range of pH, the magnetic adsorbent can be regenerated at least six times using 0.1 M HNO3. Following adsorption/desorption, determination of metal ions is provided by inductively coupled plasma optical emission spectrometry (ICP-OES) . The linear range of the proposed method is 0.1 - 200 μg L−1. The limits of detection (LOD) are 0.12 μg L−1 for Zn(II); 0.06 μg L−1 for Cd(II); 0.39 for Cu(II); 0.15 μg L−1 for Cr(III); and 0.76 μg L−1 for Pb(II). The method performance was evaluated in the analysis of environmental, tap, and wastewater samples with recoveries in the range of 94.0–104.0%., The authors received from the EU financial support under the FP7-PEOPLE-2009-IRSES (project No.247603) program. Dr. Natalia Kobylinska received financial support given by the Ministry of Education and Science of Ukraine (Grant № М-7/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Efficient adsorption of pharmaceutical drugs from aqueous solution using a mesoporous activated carbon

  • Hubetska, Tetiana S.
  • Kobylinska, Natalia
  • García, José R.
The removal of widely used pharmaceuticals by new granular mesoporous activated carbon materials prepared via a simple one-step pyrolysis process was studied. The series of mesoporous carbons (MC) were derived from sucrose/polystyrene using two mesoporous matrices: MCM-48 and SBA-15 sieves. Two different activation schemes were used to obtained samples: steam-pyrolysis at 900 °C, and chemical modification (with HNO3, H2O2 and their mixture) at 200 °C. The studied conditions of chemical oxidation led to significant structural alterations. Compared to the activated carbon treated by steam at 900 °C, the treatment via chemical oxidation increased the total volume of pores from 1.09 to 2.73 cm3 g−1. The total adsorption capacity towards tetracycline was found to be proportional to the mesoporous volume and the amount of surface O-containing groups. From the experimental adsorption isotherms, the maximum adsorption capacity was calculated 909.2 mg g−1 for tetracycline at pH 7. The kinetics of adsorption fits the pseudo-second order model perfectly. The adsorption data treated by both Langmuir and Freundlich models indicates that the adsorption was monomolecular. This research provides insight into the adsorption behavior of antibiotics on non-activated and activated mesoporous carbonous materials and facilitates their application to removal of pharmaceuticals from contaminated aqueous solutions. The potential adsorption mechanism of mesoporous carbons for the adsorption of antibiotics was proposed. The granular mesoporous carbon after oxidation by mixture of HNO3 and H2O2 with ration 1:1 exhibited much higher adsorptive activity and still showed relatively high adsorption stability even after five cycles, which were potentially suitable for easy separation and high efficiency., This study was supported by grants from EU FP-7-PEOPLE-2009-IRSES (№ 247603). The University of Oviedo is grateful for financial support from Spain’s Ministry for the Economy and Business - MINECO (MAT2016-78155-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrophobically functionalised magnetic nanocomposite as a new adsorbent for pre-concentration of organochlorine pesticides in water solution

  • Hubetska, Tetiana S.
  • Krivtsov, Igor V.
  • Kobylinska, Natalia
  • García, José R.
Magnetite (Fe 3 O 4 ) nanoparticles modified with a nonionic surfactant, Triton X-100, have been applied for magnetic solid-phase extraction of organochlorine pesticides (OCPs) from a water medium. The magnetic core-shell nanoparticles decorated with layers of silica and Triton X-100 have been prepared through a step-by-step technique. The synthesized materials were thoroughly characterized using transmission electron microscopy, powder X-ray diffraction analysis, nitrogen physisorption, elemental analysis, and vibrating sample magnetometry. The synthesized solids were tested for the preconcentration of OCPs present in water for their subsequent analysis by gas chromatography coupled with mass spectrometry. The proposed method has demonstrated a good linearity (R 2 > 0.9915) in the range of 1-10 000 ng·kg -1 , with a relative standard deviation of less than 11.7%. The preconcentration factors obtained under the optimal conditions were in the range of 2362-10593 for 100 mL of sample solution., This study was supported by grants from EU FP-7-PEOPLE-2009-IRSES (№ 247603). University of Oviedo thanks for financial support Spanish MINECO (MAT2016-78155-C2-1-R)., Peer reviewed