Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A versatile generator of nanoparticle aerosols. A novel tool in environmental and occupational exposure assessment

  • Clemente, Alberto
  • Lobera, M. Pilar
  • Balas, Francisco
  • Santamaría, Jesús
The increasing presence of nanotechnology on the market entails a growing probability of finding ENMs in the environment. Nanoparticles aerosols are a yet unknown risk for human and environmental exposure that may normally occur at any point during the nanomaterial lifecycle. There is a research gap in standardized methods to assess the exposure to airborne nanoparticles in different environments. The controllable generation of nanoparticle aerosols has long been a challenging objective for researchers and industries dealing with airborne nanoparticles. In this work, a versatile system to generate nanoparticulate aerosols has been designed. The system allows the production of both i) instantaneous nanoparticle clouds and ii) continuous nanoparticle streams with quasi-stable values of particle concentration and size distribution. This novel device uses a compressed-air pressure pulse to disperse the target material into either the testing environment (instantaneous cloud formation) or a secondary chamber, from which a continuous aerosol stream can be drawn, with a tunable nanoparticle concentration. The system is robust, highly versatile and easy to operate, enabling reproducible generation of aerosols from a variety of sources. The system has been verified with four dry nanomaterials: TiO2, ZnO, CuO and CNT bundles., Funding from the European Union 7th Framework Programme under the project “NanoValid, Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials” (Grant Agreement #263147) is acknowledged. F.B. thanks the MINECO ‘Ramón y Cajal’ Programme (Contract RYC-2011-07641) for financial support. M.P.L. thanks the MINECO ‘Juan de la Cierva’ Programme (Contract JCI-2012-13421) for financial support. Author acknowledged the financial support of CIBER-BBN, which is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparison of dust release from epoxy and paint nanocomposites and conventional products during sanding and sawing

  • Gómez, Virginia
  • Levin, Marcus
  • Saber, Anne T.
  • Irusta, Silvia
  • Dal Maso, Miikka
  • Hanoi, Roberto
  • Santamaría, Jesús
  • Jensen, Keld A.
  • Wallin, Håkan
  • Koponen, Ismo K.
The release of dust generated during sanding or sawing of nanocomposites was compared with conventional products without nanomaterials. Epoxy-based polymers with and without carbon nanotubes, and paints with different amounts of nano-sized titanium dioxide, were machined in a closed aerosol chamber. The temporal evolution of the aerosol concentration and size distribution were measured simultaneously. The morphology of collected dust by scanning electron microscopy was different depending on the type of nanocomposites: particles from carbon nanotubes (CNTs) nanocomposites had protrusions on their surfaces and aggregates and agglomerates are attached to the paint matrix in particles emitted from alkyd paints. We observed no significant differences in the particle size distributions when comparing sanding dust from nanofiller containing products with dust from conventional products. Neither did we observe release of free nanomaterials. Instead, the nanomaterials were enclosed or partly enclosed in the matrix. A source strength term Si (cm(-3) s(-1)) that describes particle emission rates from continuous sources was introduced. Comparison between the Si parameters derived from sanding different materials allows identification of potential effects of addition of engineered nanoparticles to a composite., European Community’s Seventh Framework Programme (FP7/2007–2013); NanoSustain (247989); NanoValid (263147), FPU scholarship (AP2008-02067); Danish Working Environment Research Fund (Danish Centre for Nanosafety, 20110092173/3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fast and simple assessment of surface contamination in operations involving nanomaterials

  • Clemente, Alberto
  • Jiménez, Raquel
  • Encabo-Berzosa, M. Mar
  • Lobera, M. Pilar
  • Balas, Francisco
  • Santamaría, Jesús
The deposition of airborne nanosized matter onto surfaces could pose a potential risk in occupational and environmental scenarios. The incorporation of fluorescent labels, namely fluorescein isotiocyanate (FITC) or tris-1,3-phenanthroline ruthenium (II) chloride (Ru(phen)3Cl2), into spherical 80-nm silica nanoparticles allowed the detection after the illumination with LED light of suitable wavelength (365 or 405 nm respectively). Monodisperse nanoparticle aerosols from fluorescently labeled nanoparticles were produced under safe conditions using powder generators and the deposition was tested into different surfaces and filtering media. The contamination of gloves and work surfaces that was demonstrated by sampling and SEM analysis becomes immediately clear under laser or LED illumination. Furthermore, nanoparticle aerosols of about 105 nanoparticles/cm3 were alternatively fed through a glass pipe and personal protective masks to identify the presence of trapped nanoparticles under 405 nm or 365 nm LED light. This testing procedure allowed a fast and reliable estimation of the contamination of surfaces with nanosized matter, with a limit of detection based on the fluorescence emission of the accumulated solid nanoparticles of 40 ng of Ru(phen)3@SiO2 of silica per mg of non-fluorescent matter., Funding from the European Union 7th Framework Programme under the project“NanoValid, Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials” (Grant Agreement #263147). F. B. thanks financial support from the Ministry of Economy and Competitiveness of Spain (MINECO) ‘Ramón y Cajal’ Programme (Contract RYC-2011-07641). M. P. L. thanks financial support from the MINECO ‘Juan de la Cierva’ Programme (Contract JCI-2012-13421). Finally, financial support from the Government of Aragon and European Social Fund were gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Fluorescently labelled SiO2 nanoparticles as tracers in natural waters: Dependence of detection limits on environmental conditions

  • Clemente, Alberto
  • Moreno, Nuria
  • Lobera, M. Pilar
  • Balas, Francisco
  • Santamaría, Jesús
The identification of engineered nanomaterials (ENMs) in the environment is of uttermost importance, in view of the possibility of harmful effects on living organisms. While it is clear that monitoring their presence and accumulation is essential in any risk assessment scenario, this is a challenging task. On the one hand, ENMs are present at trace concentration levels, requiring extremely sensitive sampling and analysis methods. On the other hand, specific identification of ENMs is further complicated by the simultaneous presence of other nanomaterials (often analogous in terms of size and properties) already present in the environment. Therefore, the development of labels that allow unequivocal, highly sensitive identification of specific nanomaterials is desirable. Here, we report the development of stable fluorescent labels for silica (SiO2) nanoparticles. The markers developed allow monitoring of their presence in environmentally relevant media at low detection levels. Identification of labelling signals has been performed using both online and offline techniques under a variety of conditions., Funding from the European Union 7th Framework Programme under the project “NanoValid, Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials” (Grant Agreement #263147) is acknowledged. F. B. thanks the MINECO ‘Ramón y Cajal’ Programme (Contract RYC-2011-07641) for financial support. M. P. L. thanks the MINECO ‘Juan de la Cierva’ Programme (Contract JCI-2012-13421) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-resolution imaging with SEM/T-SEM, EDX and SAM as a combined methodical approach for morphological and elemental analyses of single engineered nanoparticles

  • Rades, Steffi
  • Lobera, M. Pilar
  • Hanoi, Roberto
  • Unger, Wolfgang E. S.
et al., The combination of complementary characterization techniques such as SEM (Scanning Electron Microscopy), T-SEM (Scanning Electron Microscopy in Transmission Mode), EDX (Energy Dispersive X-ray Spectroscopy) and SAM (Scanning Auger Microscopy) has been proven to be a powerful and relatively quick characterization strategy for comprehensive morphological and chemical characterization of individual silica and titania nanoparticles. The selected “real life” test materials, silica and titania, are listed in the OECD guidance manual as representative examples because they are often used as commercial nanomaterials. Imaging by high resolution SEM and in the transmission mode by T-SEM allows almost simultaneous surface and in-depth inspection of the same particle using the same instrument. EDX and SAM enable the chemical characterization of bulk and surface of individual nanoparticles. The core–shell properties of silica based materials are addressed as well. Titania nominally coated by silane purchased from an industrial source has been found to be inhomogeneous in terms of chemical composition., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 263147., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Versatile hollow fluorescent metal-silica nanohybrids through a modified microemulsion synthesis route

  • Clemente, Alberto
  • Moreno, Nuria
  • Lobera, M. Pilar
Silica-metal nanohybrids are common materials for applications in biomedicine, catalysis or sensing. Also, hollow structures are of interest as they provide additional useful features. However, in these materials the control of the size and accessibility to the inner regions of the structure usually requires complex synthesis procedures. Here we report a simple colloidal procedure for synthesizing hollow silica-metal nanohybrids, driven by the diffusion of metal precursors through the porous silica shell and subsequent reduction in aqueous solutions. The formation of hollow nanoparticles is controlled by the colloidal conditions during synthesis, which affect the ripening of hollow nanoparticles in presence of organosilanes. The modification of the conditions during synthesis affected the growth of silica precursors in presence of fluorescein isothiocyanate (FITC). The limited access to water molecules during the hydrolysis of silica precursors is attributed to the hydrophobicity of organic fluorescent molecules linked to the condensing silica clusters at the initial stages of nanoparticle formation and to the limitation of water content in the microemulsion method used. Finally, the growth of metal nanoseeds at the core of hollow nanoparticles can be easily achieved though a simple method in aqueous environment. The pH and thermal conditions during the reduction process affect the formation of metal-silica nanohybrids and their structural features., Financial support from the Government of Aragon and European Social Fund were gratefully acknowledged. Funding from the European Union 7 th Framework Programme under the project “NanoValid, Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials” (Grant Agreement #263147). F.B. thanks financial support from the Ministry of Economy and Competitiveness of Spain (MINECO) ‘Ramón y Cajal’ Programme (Contract RYC-2011-07641). M.P.L. thanks financial support from the MINECO ‘Juan de la Cierva’ Programme (Contract JCI-2012-13421)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Versatile hollow fluorescent metal-silica nanohybrids through a modified microemulsion synthesis route

  • Clemente, A.
  • Moreno, N.
  • Lobera, M.P.
  • Balas, F.
  • Santamaria, J.
Silica-metal nanohybrids are common materials for applications in biomedicine, catalysis or sensing. Also, hollow structures are of interest as they provide additional useful features. However, in these materials the control of the size and accessibility to the inner regions of the structure usually requires complex synthesis procedures. Here we report a simple colloidal procedure for synthesizing hollow silica-metal nanohybrids, driven by the diffusion of metal precursors through the porous silica shell and subsequent reduction in aqueous solutions. The formation of hollow nanoparticles is controlled by the colloidal conditions during synthesis, which affect the ripening of hollow nanoparticles in presence of organosilanes. The modification of the conditions during synthesis affected the growth of silica precursors in presence of fluorescein isothiocyanate (FITC). The limited access to water molecules during the hydrolysis of silica precursors is attributed to the hydrophobicity of organic fluorescent molecules linked to the condensing silica clusters at the initial stages of nanoparticle formation and to the limitation of water content in the microemulsion method used. Finally, the growth of metal nanoseeds at the core of hollow nanoparticles can be easily achieved though a simple method in aqueous environment. The pH and thermal conditions during the reduction process affect the formation of metal-silica nanohybrids and their structural features.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fast and simple assessment of surface contamination in operations involving nanomaterials

  • Clemente, A.
  • Jiménez, R.
  • Encabo, M.M.
  • Lobera, M.P.
  • Balas, F.
  • Santamaria, J.
The deposition of airborne nanosized matter onto surfaces could pose a potential risk in occupational and environmental scenarios. The incorporation of fluorescent labels, namely fluorescein isotiocyanate (FITC) or tris-1, 3-phenanthroline ruthenium (II) chloride (Ru(phen)3Cl2), into spherical 80-nm silica nanoparticles allowed the detection after the illumination with LED light of suitable wavelength (365 or 405 nm respectively). Monodisperse nanoparticle aerosols from fluorescently labeled nanoparticles were produced under safe conditions using powder generators and the deposition was tested into different surfaces and filtering media. The contamination of gloves and work surfaces that was demonstrated by sampling and SEM analysis becomes immediately clear under laser or LED illumination. Furthermore, nanoparticle aerosols of about 105 nanoparticles/cm3 were alternatively fed through a glass pipe and personal protective masks to identify the presence of trapped nanoparticles under 405 nm or 365 nm LED light. This testing procedure allowed a fast and reliable estimation of the contamination of surfaces with nanosized matter, with a limit of detection based on the fluorescence emission of the accumulated solid nanoparticles of 40 ng of Ru(phen)3@SiO2 of silica per mg of non-fluorescent matter.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fluidized bed generation of stable silica nanoparticle aerosols

  • Clemente, A.
  • Balas, F.
  • Lobera, M. P.
  • Irusta, S.
  • Santamaria, J.
A long-lasting generator of continuous silica nanoparticle aerosols based in a fluidized bed of glass beads coated with nanosized silica has been developed. The attrition resulting from the bubbling fluidized bed regime progressively detaches the silica coating from the glass beads, giving rise to a steady production of silica nanosized aerosols with median diameters from 100 to 250 nm depending on the initial size of the coating nanoparticles. Continuous aerosol production could be maintained for more than 12 h, and the nanoparticle concentration can be easily tuned in the range of 2000 to 14,000 #/cm3 by adjusting the fluidization and/or dilution flow rates.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fluorescently labelled SiO2 nanoparticles as tracers in natural waters: Dependence of detection limits on environmental conditions

  • Clemente, A.
  • Moreno, N.
  • Lobera, M.P.
  • Balas, F.
  • Santamaria, J.
The identification of engineered nanomaterials (ENMs) in the environment is of uttermost importance, in view of the possibility of harmful effects on living organisms. While it is clear that monitoring their presence and accumulation is essential in any risk assessment scenario, this is a challenging task. On the one hand, ENMs are present at trace concentration levels, requiring extremely sensitive sampling and analysis methods. On the other hand, specific identification of ENMs is further complicated by the simultaneous presence of other nanomaterials (often analogous in terms of size and properties) already present in the environment. Therefore, the development of labels that allow unequivocal, highly sensitive identification of specific nanomaterials is desirable. Here, we report the development of stable fluorescent labels for silica (SiO2) nanoparticles. The markers developed allow monitoring of their presence in environmentally relevant media at low detection levels. Identification of labelling signals has been performed using both online and offline techniques under a variety of conditions. © 2016 The Royal Society of Chemistry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A versatile generator of nanoparticle aerosols. A novel tool in environmental and occupational exposure assessment

  • Clemente, A.
  • Lobera, M.P.
  • Balas, F.
  • Santamaria, J.
The increasing presence of nanotechnology on the market entails a growing probability of finding ENMs in the environment. Nanoparticles aerosols are a yet unknown risk for human and environmental exposure that may normally occur at any point during the nanomaterial lifecycle. There is a research gap in standardized methods to assess the exposure to airborne nanoparticles in different environments. The controllable generation of nano particle aerosols has long been a challenging objective for researchers and industries dealing with airborne nano particles. In this work, a versatile system to generate nanoparticulate aerosols has been designed. The system allows the production of both i) instantaneous nanoparticle clouds and ii) continuous nanoparticle streams with quasi-stable values of particle concentration and size distribution. This novel device uses a compressed air pressure pulse to disperse the target material into either the testing environment (instantaneous cloud formation) or a secondary chamber, from which a continuous aerosol stream can be drawn, with a tunable nanoparticle concentration. The system is robust, highly versatile and easy to operate, enabling reproducible generation of aerosols from a variety of sources. The system has been verified with four dry nanomaterials: TiO2, ZnO, CuO and CNT bundles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Assessment of a panel of interleukin-8 reporter lung epithelial cell lines to monitor the pro-inflammatory response following zinc oxide nanoparticle exposure under different cell culture conditions

  • Stoehr, Linda C.
  • Endes, Carola
  • Radauer-Preiml, Isabella
  • Boyles, Matthew S. P.
  • Casals, Eudald|||0000-0002-2900-7295
  • Balog, Sandor
  • Pesch, Markus
  • Petri-Fink, Alke
  • Rothen-Rutishauser, Barbara
  • Himly, Martin|||0000-0001-5416-085X
  • Clift, Martin J. D.
  • Duschl, Albert|||0000-0002-7034-9860
Stably transfected lung epithelial reporter cell lines pose an advantageous alternative to replace complex experimental techniques to monitor the pro-inflammatory response following nanoparticle (NP) exposure. Previously, reporter cell lines have been used under submerged culture conditions, however, their potential usefulness in combination with air-liquid interface (ALI) exposures is currently unknown. Therefore, the aim of the present study was to compare a panel of interleukin-8 promoter (pIL8)-reporter cell lines (i.e. green or red fluorescent protein (GFP, RFP), and luciferase (Luc)), originating from A549 lung epithelial type II-like cells cells, following NPs exposure under both submerged and ALI conditions. All cell lines were exposed to zinc oxide (ZnO) NPs at 0.6 and 6.2 μg/cm 2 for 3 and 16 hours under both submerged and ALI conditions. Following physicochemical characterization, the cytotoxic profile of the ZnO-NPs was determined for each exposure scenario. Expression of IL-8 from all cell types was analyzed at the promoter level and compared to the mRNA (qRT-PCR) and protein level (ELISA). In summary, each reporter cell line detected acute pro-inflammatory effects following ZnO exposure under each condition tested. The pIL8-Luc cell line was the most sensitive in terms of reporter signal strength and onset velocity following TNF-α treatment. Both pIL8-GFP and pIL8-RFP also showed a marked signal induction in response to TNF-α, although only after 16 hrs. In terms of ZnO-NP-induced cytotoxicity pIL8-RFP cells were the most affected, whilst the pIL8-Luc were found the least responsive. In conclusion, the use of fluorescence-based reporter cell lines can provide a useful tool in screening the pro-inflammatory response following NP exposure in both submerged and ALI cell cultures. The online version of this article (doi:10.1186/s12989-015-0104-6) contains supplementary material, which is available to authorized users.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Chitosan functionalisation of gold nanoparticles encourages particle uptake and induces cytotoxicity and pro-inflammatory conditions in phagocytic cells, as well as enhancing particle interactions with serum components

  • Boyles, Matthew S. P.
  • Kristl, Theresa
  • Andosch, Ancuela
  • Zimmermann, Mirjam
  • Tran Thi Thanh, Ngoc
  • Casals, Eudald|||0000-0002-2900-7295
  • Himly, Martin|||0000-0001-5416-085X
  • Puntes, Víctor|||0000-0001-8996-9499
  • Huber, Christian G.
  • Lütz-Meindl, Ursula
  • Duschl, Albert|||0000-0002-7034-9860
Gold nanoparticles (AuNPs) are a popular choice for use in medical and biomedical research applications. With suitable functionalisation AuNPs can be applied in drug delivery systems, or can aid in disease diagnosis. One such functionalisation is with chitosan, which enables efficient interaction and permeation of cellular membranes, providing an effective adjuvant. As both AuNPs and chitosan have been shown to have low toxicity and high biocompatibility their proposed use in nanomedicine, either individually or combined, is expanding. However, further toxicological and immunological assessments of AuNP-chitosan conjugates are still needed. Therefore, we have evaluated how AuNP functionalisation with chitosan can affect uptake, cytotoxicity, and immunological responses within mononuclear cells, and influence the interaction of AuNPs with biomolecules within a complex biofluid. The AuNPs used were negatively charged through citrate-coating, or presented either low or high positive charge through chitosan-functionalisation. Uptake by THP-1 cells was assessed via transmission electron microscopy and electron energy loss spectroscopy, pro-inflammatory responses by ELISA and qRT-PCR, and cell death and viability via lactate dehydrogenase release and mitochondrial activity, respectively. Interactions of AuNPs with protein components of a frequently used in vitro cell culture medium supplement, foetal calf serum, were investigated using mass spectrometry. Although cells internalised all AuNPs, uptake rates and specific routes of intracellular trafficking were dependent upon chitosan-functionalisation. Accordingly, an enhanced immune response was found to be chitosan-functionalisation-dependent, in the form of CCL2, IL-1β, TNF-α and IL-6 secretion, and expression of IL - 1β and NLRP3 mRNA. A corresponding increase in cytotoxicity was found in response to chitosan-coated AuNPs. Furthermore, chitosan-functionalisation was shown to induce an increase in unique proteins associating with these highly charged AuNPs. It can be concluded that functionalisation of AuNPs with the perceived non-toxic biocompatible molecule chitosan at a high density can elicit functionalisation-dependent intracellular trafficking mechanisms and provoke strong pro-inflammatory conditions, and that a high affinity of these NP-conjugates for biomolecules may be implicit in these cellular responses. The online version of this article (doi:10.1186/s12951-015-0146-9) contains supplementary material, which is available to authorized users.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bacterial endotoxin (lipopolysaccharide) binds to the surface of gold nanoparticles, interferes with biocorona formation and induces human monocyte inflammatory activation

  • Li, Yang|||0000-0001-7242-4687
  • Shi, Zhenzhen|||0000-0001-9922-3957
  • Radauer-Preiml, Isabella
  • Andosch, Ancuela
  • Casals, Eudald|||0000-0002-2900-7295
  • Luetz-Meindl, Ursula
  • Cobaleda-Siles, Macarena
  • Lin, Zhoumeng|||0000-0002-8731-8366
  • Jaberi-Douraki, Majid
  • Italiani, Paola|||0000-0001-9830-2733
  • Horejs-Hoeck, Jutta|||0000-0002-0984-204X
  • Himly, Martin|||0000-0001-5416-085X
  • Monteiro-Riviere, Nancy A.|||0000-0002-0132-0861
  • Duschl, Albert|||0000-0002-7034-9860
  • Puntes, Víctor|||0000-0001-8996-9499
  • Boraschi, Diana|||0000-0002-3953-4056
Nanoparticles (NPs) are easily contaminated by bacterial endotoxin (lipopolysaccharide [LPS]). The presence of LPS can be responsible for many immune/inflammatory effects attributed to NPs. In this study, we examined the effects of LPS adsorption on the NP surface on the formation of a biocorona in biological fluids and on the subsequent inflammation-inducing activity of NPs. Different gold (Au) NPs with sizes ranging from 10 to 80 nm and with different surface functionalization (sodium citrate, lipoic acid, and branched polyethyleneimine (BPEI), or polyethylene glycol (PEG)) were exposed to E. coli LPS under different conditions. The binding capacity of LPS to the surface of AuNPs was dose- and time-dependent. LPS attached to sodium citrate and lipoic acid coatings, but did not adhere to BPEI- or PEG-coated NPs. By computational simulation, the binding of LPS to AuNPs seems to follow the Langmuir absorption isotherm. The presence of LPS on AuNP surface interfered and caused a decrease in the formation of the expected biomolecular corona upon incubation in human plasma. LPS-coated AuNPs, but not the LPS-free NPs, induced significant inflammatory responses in vitro. Notably, while free LPS did also induce an anti-inflammatory response, LPS bound to NPs appeared unable to do so. In conclusion, the unintentional adsorption of LPS onto the NP surface can affect the biocorona formation and the inflammatory properties of NPs. Thus, for an accurate interpretation of NP interactions with cells, it is extremely important to be able to distinguish the intrinsic NP biological effects from those caused by biologically active contaminants such as endotoxin.