Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropy and inhomogeneity measurement of the transport properties of spark plasma sintered thermoelectric materials

  • Jacquot, Alexandre
  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
  • Saleemi, Mohsin
  • Toprak, Muhammet
  • Muhammed, Mamoun
  • Bartel, M.
  • Jaegle, M.
We report on the development and capabilities of two new measurement systems developed at Fraunhofer-IPM. The first measurement system is based on an extension of the Van der Pauw method and is suitable for cube-shaped samples. A mapping of the electrical conductivity tensor of a Skutterudite-SPS samples produced at the Instituto de Microelectrónica de Madrid is presented. The second measurement system is a ZTmeter also developed at the Fraunhofer-IPM. It enables the simultaneous measurement of the electrical conductivity, Seebeck coefficient and thermal conductivity up to 900 K of cubes at least 5x5x5 mm3 in size. The capacity of this measurement system for measuring the anisotropy of the transport properties of a (Bi,Sb)2Te3SPS sample produced by KTH is demonstrated by simply rotating the samples., The research work is supported by the European Commission under FP7-NEXTEC project, Grant # 263167 [FP7/2011-2013]. KTH_SPS#16352 was produced by Aleksey Ruditskiy who is now working at the City College of New York., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Skutterudites as thermoelectric materials: Revisited

  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
© The Royal Society of Chemistry 2015. The research on skutterudites in the last few years has contributed to a better understanding of the physical processes which play an important role in enhancing their thermoelectric performance and to the discovery of novel filled compounds, with one of the most promising zT values at intermediate temperatures. Skutterudites are still an ongoing field of research, and an improvement of their efficiencies, stabilities, contacts, industrial scalable fabrication processes and other factors are expected in the near future in order to develop viable modules for intermediate temperature range applications, such as in the automobile industry, factories or incinerators. This paper gives a review on the status of research in the field of skutterudites., The authors acknowledge partial financial support from NEXTEC “Next Generation Nano-engineered Thermoelectric Converters – from concept to industrial validation”, project founded by the European Commission under the Seventh Framework Programme (FP7) since July 2011 Grant # 263167. A. M. and J. F. F. are grateful to MICINN project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (ref. RYC-2013-14436)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electrodeposition of Co-Sb Thick Films and their Thermoelectric Properties in DMSO

  • Rull Bravo, Marta
  • Muñoz Rojo, Miguel
  • Jacquot, Alexandre
  • Fernández Lozano, José Francisco
  • López-Martínez, Antonio
  • Martín-González, Marisol
Póster presentado en la 11th European Conference on Thermoelectrics (ECT2013), celebrada en Noordwijk (Holanda) del 18 al 20 de noviembre de 2013., In the last decade there has been an increasingly interest in the Skutterudites in the field of thermoelectricity 1. This interest is based on the fact that the highest performance of this material happens at 400ºC, which makes it ideal for multiple applications as energy harvesting devices. Generally, most of the actual compounds working under these conditions are unstable or presents a low figure of merit 2. However, Skutterudites have usually good values of the power factor, but also they offer the possibility of an enhancement of their efficiency due to the reduction of the thermal conductivity via doping the structure 3 or filling of the voids 3 of the structure with heavy atoms. Nevertheless, to obtain the right phase by electrodeposition is still not a solve question. 4 This work deals the electrodeposition of Skutterudite (CoSb3). We have been able to grow CoSb3 films via electrochemical deposition in an organic solvent (DMSO). After studying different parameters such as temperature, stirring, time of deposition or potential, we have been able to obtain quite homogeneously films with 1:3 ratio. For the first time, thermoelectric properties have been measured in different labs, to measure the Seebeck coefficient and electrical conductivity of the films in plane, and using a Seebeck microprobe system, to measure and make a map of the Seebeck coefficient in cross-plane. We determine the Seebeck coefficient to be -12 µV/K in plane and -37 µV/K out of plane, and an electrical conductivity of around 9 S/cm in plane., The research work is supported by the European Commission under FP7-NEXTEC project, Grant # 263167 [FP7/2011-2013]., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tailoring the thermoelectric properties of Skutterudites by nanocomposites

  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Abad Mayor, Begoña
  • Muñoz Rojo, Miguel
  • Jaquot, Alexander
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
Póster presentado en la 34th Annual International Conference on Thermoelectrics (ICT) y en la 13th European Conference on Thermoelectrics(ECT), celebradas en Dresden del 28 de junio al 2 de julio de 2015., Skutterudites have attracted great attention for their promising potential on thermoelectric applications, such as harvesting the heat generated in industrial processes and automotive operations. To improve their thermoelectric figure of merit ,emphasis has gone into modifying the band structure through doping to enhance the Power Factor and reducing thermal conductivity through increasing phonon scattering by filling and in-situ nanocomposites formation.Depending on the nature of the nanoinclusions and the proportion in the matrix, it is possible to tailor the thermoelectric properties. In this work, different concentrations of oxides were included in a one-step synthesis mechanism, obtaining the Skutterudite phase with nanoinclusions and therefore, achieving lower thermal conductivities than those reported in literature., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermoelectric Skutterudite/oxide nanocomposites: Effective decoupling of electrical and thermal conductivity by functional interfaces

  • Moure Arroyo, Alberto
  • Rull Bravo, Marta
  • Abad Mayor, Begoña
  • Campo, Ángel Adolfo del
  • Muñoz Rojo, Miguel
  • Aguirre, Myriam H.
  • Jacquot, Alexandre
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
Nanocomposites that combine percolated nano-CoSb3 semiconductors with isolated nano-oxide clusters are shown as an effective approach to decouple electrical and thermal conductivity in thermoelectric applications through the formation of functional interfaces. This type of decoupling is very important to increase the Figure of Merit (zT) of thermoelectrics and it is one of the greatest challenges searched by the community. We carry out an innovative synthesis of Skutterudite/oxide nanocomposites in air by high energy milling and sintering by Spark Plasma Sintering, where functional interfaces are developed in situ. A confocal Raman Microscopy study evidences unequivocally the appearance of a space charge layer at the Skutterudite/oxide interfaces characterized by a crystal lattice softening and a surprising enhanced Raman signal. The functional interfaces act as highly effective phonon scattering and trapping centers that highly reduce the thermal conductivity, while a high electrical conductivity is achieved by selective doping the Skutterudite phase. This approach leads to Figures of Merit ca. 1 for Te-doped CoSb3. This work opens up new possibilities for the facile, large scale synthesis of well performing thermoelectric materials for medium range temperatures applications., This work was supported by the European Projects “NEXTEC” FP7-NMP-201-1.2-3 and Thermo-Spintronic FP7-PEOPLE-2011-Marie Curie, CIG project N° 304043.A. M. and J. F. F. are grateful to MICINN project MAT2013-48009-C4-1-P for the financial support provided for this research. M.M.G. wants to acknowledge also the Infante project 201550E072. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013–14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Tesis doctoral (DoctoralThesis)

Nano-ingeniería del material escuterudita para un alto rendimiento en los dispositivos de conversión de energía termoeléctricos

  • Rull Bravo, Marta
Tesis llevada a cabo para conseguir el grado de Doctor por la Universidad Autónoma de Madrid.--2016-02-15.--Sobresaliente Cum Laude, [EN] Recently, there has been a resurge in research into better ways of optimizing energy resources and new energy sources due to the growing demand for energy in the present world. In this context, thermoelectric materials have appeared as a new clean energy alternative capable of harvesting waste heat from traditional fuel combustion processes, transforming it into electricity and therefore increasing the total process efficiency. Although thermoelectric materials have been known since the XIX century, only since the recent discovery of new complex materials and the effect of nanostructuring, has thermoelectric materials achieved competitive industrial efficiencies. Among the different applications for thermoelectric materials for intermediate temperature (between 225-625 oC), Skutterudite materials stand out due to their efficiency/price ratio, stability and as they do not contain lead, an element prohibited by European regulations., A good thermoelectric material must possess a high Seebeck coefficient, low electrical resistivity and low thermal conductivity. Skutterudites have a good Seebeck coefficient and low electrical resistivity. However, thermal conductivity is still high, around 10 W·m-1·K-1. Several approaches have been proposed to reduce thermal conductivity. The first was a modification of the structure by the introduction of heavy atoms into the voids of the structure, generating phonon scattering centers at the atomic scale, or by doping in the crystal structure. A second approach used nanostructuring and defects generation, thereby creating other phonon scattering centers but at the nano or mesoscale. Through these approaches, thermal conductivities values were reduced to 2-2.5 W·m-1·K-1., IIThe aim of this doctoral thesis has been to optimize the synthesis and properties of Skutterudite thermoelectric material for potential application to the automotive industry. The main characteristics needed in order to improve the Skutterudite material and obtain high Figure of Merit are focused on two fundamental aspects: - Modulation and optimization of the thermoelectric properties by in situ formation of metal/oxide composites, which allow low thermal conductivity while maintaining high Seebeck coefficients through a novel percolated micro/nanostructure. - Optimization of the electrical resistivity by doping the Skutterudite in order to obtain high Figure of Merit. This thesis is divided into five different chapters. The principal subjects covered are the optimization of the CoSb3 nanocomposite and the subsequent doping with different elements. Chapter 1 provides a brief introduction to thermoelectricity and a review of different thermoelectric materials depending on the application temperature range, as well as an introduction to Skutterudite materials and different approaches to improve their Figure of Merit to date. In Chapter 2, different methods of synthesis and compaction of the material, as well as the different techniques used for its characterization are discussed. Chapter 3 is divided into three main parts: the thermodynamic theory that has been studied for a better understanding of the synthesized nanocomposite, the optimization of the milling and sintering parameters and the fabrication and characterization of CoSb3 composites. In Chapter 4, a thorough study of doping in cobalt and/or antimony positions, as well as thermoelectric optimization and structural characterization of these materials is conducted. Finally, Chapter 5 presents the main conclusions of this PhD work., [ES] La investigación sobre formas de optimizar los recursos energéticos, así como nuevas fuentes de energía es un tema de investigación en auge hoy en día debido a la creciente demanda de energía en nuestro mundo. En este marco aparecen los materiales termoeléctricos como una alternativa de energía limpia, capaz de reutilizar el calor residual de los procesos tradicionales de quema de combustibles, para transformarlo en electricidad, y así aumentar la eficiencia total del proceso. Aunque los materiales termoeléctricos son conocidos desde el siglo XIX, ha sido recientemente con los avances en materiales complejos y con el efecto de la nanoestructuración cuando se ha llegado a obtener eficiencias competitivas para su aplicación de forma industrial. Dentro de las diferentes temperaturas de aplicación, es en el rango intermedio (entre 225-625 oC) donde los compuestos tipo Escuterudita presentan un futuro prometedor por su relación eficiencia/precio, su estabilidad y por ser compuestos libres de plomo, elemento prohibido por normativa europea., Para que un material termoeléctrico se considere óptimo para su aplicación, debe poseer un alto coeficiente Seebeck, baja resistividad eléctrica y baja conductividad térmica. Los materiales basados en la fase Escuterudita poseen un buen coeficiente Seebeck y baja resistividad eléctrica. Sin embargo, la conductividad térmica es elevada, en torno a 10 W·m-1·K-1. En la literatura se pueden encontrar varias aproximaciones para reducir el valor de la conductividad térmica. La primera es la modificación de la estructura, bien mediante introducción de átomos pesados dentro de los huecos de la estructura, generando centros dispersores de fonones a escala atómica, o mediante dopado en la estructura cristalina. La segunda aproximación es mediante la nanoestructuración y generación de defectos, creando así otros centros dispersores de fonones en el rango de la nano a la mesoescala, aumentando así su eficiencia. Mediante estas aproximaciones se ha llegado a reducir la conductividad térmica hasta valores de 2-2.5 W·m-1·K-1., n esta tesis el objetivo principal ha consistido en la síntesis y optimización de las propiedades termoeléctricas de tipo Escuterudita por técnicas fácilmente escalables industrialmente para su posterior aplicación en la industria del automóvil. Los objetivos más importantes a la hora de optimizar el material de tipo Escuterudita y obtener altas figuras de mérito se han centrado en dos aspectos fundamentales: - Modulación y optimización de las propiedades termoeléctricas mediante la obtención in situ de composites, mezclas del material Escuterudita y óxidos, que permiten reducir la conductividad térmica gracias a una nanoestructucturación, mientras que se mantiene un alto coeficiente de Seebeck, mediante la formación de una micro/nanoestructura novedosa. - Optimización de la resistividad eléctrica mediante el dopado del material de tipo Escuterudita para obtener altas figuras de mérito. Esta tesis doctoral está dividida en 5 capítulos, siendo los temas principales la optimización del nanocomposite de CoSb3, y su posterior dopado con diferentes elementos. En el capítulo 1 se expone una breve introducción a la termoelectricidad, a los diferentes materiales termoeléctricos dependiendo de su rango de temperaturas de aplicación, así como una introducción al material de tipo Escuterudita y las diferentes aproximaciones en estado de la técnica para mejorar su figura de mérito. En el capítulo 2 se resumen los diferentes métodos de síntesis y compactación del material, así como las diferentes técnicas utilizadas para la caracterización de los materiales. El capítulo 3 está dividido en tres partes fundamentales: la teoría termodinámica que se ha estudiado para una mejor comprensión en la estrategia de fabricación del material sintetizado, la optimización de los parámetros de molienda y sinterización, y la fabricación y caracterización de los composites de CoSb3. En el capítulo 4 se realiza una optimización del proceso de dopado tanto en posiciones de cobalto como en posiciones de antimonio, así como la optimización y caracterización estructural y termoeléctrica de todos los nanocomposites. Finalmente, en el capítulo 5 se recogen las principales conclusiones que ha dado lugar este trabajo doctoral., La realización de esta tesis doctoral ha sido posible gracias a la financiación del proyecto europeo Next Generation Nano-engineered Thermoelectric Converters - from concept to industrial validation (NEXTEC) del European Commission under the Seventh Framework Programme (FP7) Grant # 263167, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microwave Synthesis and Characterization of the Series Co1−x Fe x Sb3 High Temperature Thermoelectric Materials

  • Ioannidou, A. A.
  • Rull Bravo, Marta
  • Martín-González, Marisol
  • Moure Arroyo, Alberto
  • Jacquot, Alexandre
  • Niarchos, Dimitrios
The use of microwave energy for materials processing has a major potential and real advantages over conventional heating such as (1) time and energy savings, (2) rapid heating rates (volumetric heating vs. conduction), (3) considerably reduced processing time and temperature, (4) fine microstructures and hence improved mechanical properties and better product performance, and (5) finally lower environmental impact. In this study, we investigated the use of microwave-assisted synthesis to synthesize a series of Co1-x Fe x Sb3 using this novel approach, which gave high quality materials with little or no impurities in a fraction of the time needed for conventional synthesis. X-ray diffraction analysis was used to examine the structure and the lattice parameters of the samples, while scanning electron microscopy with energy dispersive x-ray spectroscopy was used to study the morphology of the compounds. The samples were sintered by spark plasma sintering, and the highest ZT of 0.33 was obtained for x = 0.2 at 700 K. © 2014 TMS., This work was supported by the European Project “NEXTEC” FP7-NMP-201-1.2-3., Peer reviewed