Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring oxygen redox reactions in ionic liquid based Li/O2 batteries by mean of the Li+ dopant concentration

  • Cecchetto, Laura
  • Tesio, Alvaro Y.
  • Olivares, Mara
  • Guardiola, Marc
  • Croce, Fausto
  • Tonti, Dino
Ionic liquids’ (ILs) reusability, non-volatility and non-corrosiveness, as well as their ease of isolation and a large electrochemical stability window make them an interesting choice as environment-friendly electrolyte for metal/air batteries. ILs have been described as designer solvents as their properties and behaviour can be adjusted to suit an individual reaction need. In the framework of this study we applied a conceptually similar designer approach and show that a simple parameter as the concentration of a Li+ dopant dramatically affects the reactions yields of Li/O2 based energy storage devices. We studied the effect of Li+ concentration from 0.1 to 1 M in a LiTFSI:PYR14TFSI ionic liquid electrolyte on the kinetics of the oxygen reduction reaction (ORR) and on the formation rate of different Li-O species at two different temperatures, finding that discharge capacity, rates and product distribution change in a non-linear way. At 60 °C highest rates and up to one order of magnitude larger capacities were observed at intermediate LiTFSI concentrations, implying a complete mechanism switch from surface to volume phase mediation for Li2O2 precipitation. At room temperature the same evolution was observed, even if in this case the surface mediation remained predominant at all concentrations. These results suggest the possibility to optimise the ionic liquid based Li/O2 battery performances in terms of discharge capacity and lithium use, by playing on temperature and alkali cation concentration., Work funded by the European Commission in the Seventh Framework Programme FP7-2010-GC-ELECTROCHEMICAL STORAGE, under contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes” (LABOHR), with contribution from the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). M.O. acknowledges CSIC for a JAE-DOC research contract cofunded by the European Social Fund. A.Y.T. acknowledges research postdoctoral grant from CONICET in particular to the program "Estadías Breves en el Exterior para Becarios Postdoctorales”. We thank fruitful discussions on ionic liquids with Dr. Gianni Appetecchi, and on ionic liquid-based Li/O2 batteries with Prof. John Owen, and all LABOHR partners., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Simple method to relate experimental pore size distribution and discharge capacity in cathodes for Li/O2 batteries

  • Olivares-Marín, Mara
  • Palomino, Pablo
  • Enciso, Eduardo
  • Tonti, Dino
We analyze in detail the relationship between pore size distribution and discharge capacity for cathodes in ionic liquid-based Li/O2 batteries at room temperature (RT) and 60 °C. We used several porous carbons with similar composition and apparent surface area but with pore distribution peaks in different points of the meso/macroporous region. The porous structure of carbons caused a significant influence on the discharge specific capacity. However, no obvious correlations between specific capacity and surface area or total pore volumes were observed. Carbons with high mesopore volumes and a predominant pore size of 20-40 nm exhibited the highest specific capacities. When temperature rises from room temperature to 60 °C, discharge capacity increases by a factor higher than two, with the smallest pores providing the highest increases. A model is introduced to empirically correlate capacity with pore size distribution. This model assumes that during electrochemical discharge the pore walls are uniformly coated in their thickness but that pores below a threshold size value do not participate at all to the capacity. Our model can account for the effects of pore size distribution using a discharge layer thickness of a few nanometers and with threshold values of excluded pore sizes, of 12 nm at RT and 10 nm at 60 °C. The model also allowed the estimation of the penetration depth of the discharge reaction on the electrode thickness and indicates that its increase is the main factor justifying the increase of capacity when temperature is increased., Work funded by the European Commission in the Seventh Framework Programme FP7-2010-GC-ELECTROCHEMICAL STORAGE, under contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes (LABOHR)”, and by the Spanish Government under contracts MAT2012-39199-C02-01 and MAT2012-39199-C02-02. M.O.-M. acknowledges CSIC for a JAE-DOC research contract cofinanced by the European Social Fund. P.P. acknowledges a FPI-UCM fellowship (BE45/10)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined Influence of Meso- and Macroporosity of Soft-Hard Templated Carbon Electrodes on the Performance of Li-O2 Cells with Different Configurations

  • Olivares, Mara
  • Aklalouch, Mohamed
  • Tonti, Dino
Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li–O2 battery cathodes., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV- 2015-0496), and through the projects MAT2015-64442-R and MAT2015-68394-R with FEDER co-funding; the European Commission (contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes, LABOHR)”. M.O. acknowledges CSIC for a JAE-DOC research contract cofinanced by European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Combined influence of meso- and macroporosity of soft-hard templated carbon electrodes on the performance of Li-O2 cells with different configurations

  • Olivares, Mara
  • Aklalouch, Mohamed
  • Tonti, Dino
© The Author(s)., Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li–O2 battery cathodes., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV- 2015-0496), and through the projects MAT2015-64442-R and MAT2015-68394-R with FEDER co-funding; the European Commission (contract no. 265971 “Lithium-Air Batteries with split Oxygen Harvesting and Redox processes, LABOHR)”. M.O. acknowledges CSIC for a JAE-DOC research contract cofinanced by European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Li/air flow battery employing Ionic liquid electrolytes

  • Grande, Lorenzo
  • Ochel, Anders
  • Monaco, Simone
  • Mastragostino, Marina
  • Tonti, Dino
  • Palomino, Pablo
  • Paillard, Elie
  • Passerini, Stefano
Despite the considerable initial optimism behind its development and prospective commercialization, the Li/air battery chemistry has now reached a mature stage of development, which has served to highlight the main underlying technological limitations, as well as what can realistically be expected from it. One of the main challenges is the control of the discharge product morphology, that is, Li2O2, onto the positive electrode. In this article, we show how the three‐phase configuration required to ensure cell operation can be induced in a two‐phase system made of mesoporous carbon and an ionic liquid electrolyte [N‐butyl‐N‐methylpyrrolidinium bis(trifluoromethane sulfonyl)imide, Pyr14TFSI] by means of an oxygen‐bubbling device (OBD) and a peristaltic pump. The use of a non‐flammable, non‐volatile electrolyte ensures long‐term, extensive discharging (up to 4.78 mAh cm−2), as well as operation at temperatures higher than room temperature., The authors acknowledge the support of the European Commission FP7 Project “Lithium‐Air Battery with Split Oxygen Harvesting and Redox Processes” (LABOHR) (FP7‐NMP‐2010, grant agreement No. 265971). P.P. acknowledges a FPI‐UCM fellowship (BE45/10).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Discharge products of ionic liquid-based Li-O2 batteries observed by energy dependent soft x-ray transmission microscopy

  • Olivares, Mara
  • Sorrentino, Andrea
  • Pereiro, Eva
  • Tonti, Dino
Products deposited on an O<inf>2</inf>-cathode discharged in ionic liquid electrolytes are analyzed by transmission soft X-ray microscopy (TXM) and compared to ether-based electrolytes, showing differences in morphology and chemical compositions. With both solvents we observe Li<inf>2</inf>O<inf>2</inf> and LiO<inf>2</inf> primary products in similar proportions. However, while as previously observed in tetraglyme an important reactivity takes place producing significant amount of carbonates, in ionic liquid-based electrolytes the formation of carbonates was almost negligible, confirming higher stability. Only when sample is intentionally air exposed before analysis, significant amounts of carbonates came up. However, LiOH crystallites are clearly recognized with the ionic liquid electrolyte. The abundance of these crystallites depends on both the LiTFSI concentration and the storage time of discharged electrodes, suggesting that they result from the reaction of water trace with primary discharge products., This work has been partially financed by the Spanish Ministry of Economy, Industry and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496), and projects MAT2012-39199-C02-01, MAT2015-68394-R, by the Generalitat de Catalunya (grant 2014 SGR 1505) and by the European Commission in the Seventh Framework Programme FP7-2010-GC-ELECTROCHEMICAL STORAGE, under contract no. 265971 “Lithium−Air Batteries with Split Oxygen Harvesting and Redox processes (LABOHR)”. M.O.M. acknowledges CSIC for a JAE-DOC research contract co-funded by the European Social Fund. The x-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. In particular, we want to thank the technical support of R. Valcarcel., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (SEV-2015-0496), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spatial Distributions of Discharged Products of Lithium-Oxygen Batteries Revealed by Synchrotron X-ray Transmission Microscopy

  • Olivares Marín, Mara
  • Sorrentino, Andrea
  • Lee, Rung-Chuan
  • Pereiro, Eva
  • Wu, Nae-Lih
  • Tonti, Dino
The discharge products of ether-based Li-O2 cells were grown directly on common carbon-coated TEM grids and observed by oxidation-state-sensitive full field transmission soft X-ray microscopy (TXM). The acquired data have permitted to quantify and localize with spatial resolution the distribution of the oxygen discharge products in these samples (i.e., lithium superoxide, peroxide, and carbonates) and appreciate several compositional, structural, and morphological aspects. Most of the peroxide particles had a toroidal shape, often with a central hole usually open on only one side, and which included significant amounts of superoxide-like phases (LiO2/Li2O2 ratio between 0.2 and 0.5). Smaller particles had smaller or no superoxide content, from which we infer that abundance of soluble LiO2 may have a role in toroid formation. Significant amount of carbonates were found irregularly distributed on the electrode surface, occasionally appearing as small particles and aggregates, and mostly coating lithium peroxide particles. This suggests the formation of a barrier that, similar to the solid electrolyte interface (SEI) critical in Li-ion batteries, requires an appropriate management for a reversible operation., The X-ray microscopy experiments were performed at MISTRAL beamline at ALBA Synchrotron with the collaboration of ALBA staff. Work was funded by the Spanish Government under contract MAT2012-39199-C02-01 and by the European Commission in the Seventh Framework Programme FP7-2010-GC-ELECTROCHEMICAL STORAGE, under contract no. 265971 “Lithium–Air Batteries with Split Oxygen Harvesting and Redox processes (LABOHR)”. M.O.M. acknowledges CSIC for a JAE-DOC research contract cofinanced by the European Social Fund. Authors thank Dr. Laura Simonelli for her useful discussion on the preliminary data analysis and Judith Oró for her help with TEM and the analysis of the electron diffraction pattern., Peer reviewed