Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Surface growth for molten silicon infiltration into carbon millimeter-sized channels: Lattice–Boltzmann simulations, experiments and models

  • Sergi, Danilo
  • Camarano, Antonio
  • Molina Jordá, José Miguel
  • Ortona, Alberto
  • Narciso, Javier
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
The process of liquid silicon infiltration is investigated for channels with radii from 0.25 to 0.75 [mm] drilled in compact carbon preforms. The advantage of this setup is that the study of the phenomenon results to be simplified. For comparison purposes, attempts are made in order to work out a framework for evaluating the accuracy of simulations. The approach relies on dimensionless numbers involving the properties of the surface reaction. It turns out that complex hydrodynamic behavior derived from second Newton law can be made consistent with Lattice-Boltzmann simulations. The experiments give clear evidence that the growth of silicon carbide proceeds in two different stages and basic mechanisms are highlighted. Lattice-Boltzmann simulations prove to be an effective tool for the description of the growing phase. Namely, essential experimental constraints can be implemented. As a result, the existing models are useful to gain more insight on the process of reactive infiltration into porous media in the first stage of penetration, i.e. up to pore closure because of surface growth. A way allowing to implement the resistance from chemical reaction in Darcy law is also proposed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Some Issues in Liquid Metals Research

  • Caturla, Maria J.
  • Jiang, Jian-Zhong
  • Louis, Enrique
  • Molina Jordá, José Miguel
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
The ten articles [1–10] included in this Special Issue on “Liquid Metals” do not intend to comprehensively cover this extensive field, but, rather, to highlight recent discoveries that have greatly broadened the scope of technological applications of these materials. Improvements in understanding the physics of liquid metals are, to a large extent, due to the powerful theoretical tools in the hands of scientists, either semi-empirical [1,5,6] or ab initio (molecular dynamics, see [7]).
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Towards optimization of SiC/CoSi2 composite material manufacture via reactive infiltration: Wetting study of Si–Co alloys on carbon materials

  • Caccia, Mario
  • Amore, S.
  • Giuranno, Donatella
  • Novakovic, R.
  • Ricci, E.
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Among manufacture techniques for SiC ceramics, reactive infiltration has proven to be the most efficient. However, materials manufactured with this technique present minimum 10% of unreacted silicon. Si hinders the performance of the material. The replacement of Si with a MexSiy can improve the performance of the composite. Since Me–Si alloys wet carbon materials, they are suitable candidates to be used as infiltrants in SiC/MexSiy composite production via reactive infiltration. To optimize the process, it is necessary to identify the mechanisms involved in infiltration and the parameters governing them. A basic wetting study can provide a clear understanding of the operative mechanisms and allow obtaining accurate parameters. In this work, the wetting behavior of silicon-cobalt alloys on carbon materials was studied using the sessile drop technique. The influence of temperature, composition and carbon crystallinity was evaluated, observing a strong dependence of process kinetics and reactivity with temperature and carbon crystallinity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

On the effects of hot spot formation during MW-assisted synthesis of Cf/SiC composites by reactive melt infiltration: Experimental simulations through high temperature treatments

  • Caccia, Mario
  • Narciso, Javier
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Synthesis of SiC-based composites using microwave(MW)-assisted reactive infiltration is a promising way to obtain these materials at lower costs due to a reduction in processing time and energy consumption. Hot spots are likely to form during this process due to the different dielectric properties of the various phases and the exothermic nature of the reaction between Si and C. To study these effects Cf/SiC composites were subjected to high-temperature treatments (1800, 2000, 2200 °C) to simulate hot spots within the material. Microstructural changes were evaluated after the thermal treatments and thermo-mechanical properties were measured and correlated to the microstructural changes. Our results indicate that evaporation of silicon is the primary damaging mechanism, causing a decrease in the bending strength of the composite due to formation of porosity and a volume increase. These effects are countered by the densification of carbon phases that improve the intrinsic thermal properties of the material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publication Otros (Other)

Effects of Fe addition on the mechanical and thermo-mechanical properties of SiC/FeSi2/Si composites produced via reactive infiltration

  • Camarano, Antonio
  • Caccia, Mario
  • Molina Jordá, José Miguel
  • Narciso, Javier
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
  • Narciso, Javier|||/items/607abb15-5039-444e-8a6b-49a22a87c33f
Remaining silicon in SiC-based materials produced via reactive infiltration limits their use in high-temperature applications due to the poor mechanical properties of silicon: low fracture toughness, extreme fragility and creep phenomena above 1000 °C. In this paper SiC–FeSi2 composites are fabricated by reactive infiltration of Si–Fe alloys into porous Cf/C preforms. The resulting materials are SiC/FeSi2 composites, in which remaining silicon is reduced by formation of FeSi2. For the richest Fe alloys (35 wt% Fe) a nominal residual silicon content below 1% has been observed. However this, the relatively poor mechanical properties (bending strength) measured for those resulting materials can be explained by the thermal mismatch of FeSi2 and SiC, which weakens the interface and does even generate new porosity, associated with a debonding phenomenon between the two phases.