Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic properties of Co nanopillar arrays prepared from alumina templates

  • Vivas, Laura G.
  • Ivanov, Yu P.
  • Trabada, D. G.
  • Proenca, M. P.
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
The preparation of magnetic nanopillars from anodic alumina templates represents a cheap way to obtain extensive ordered arrays, and thus is very appealing for nanotechnology applications. In this paper we report the preparation of arrays of Co nanopillars with 120 nm height and varying diameter. The high anisotropy of Co offers an additional possibility to control their magnetic properties. The magnetic properties of arrays of Co nanopillars are studied both experimentally and by micromagnetic simulations. Experiment and modeling show crucial changes of hysteresis loops when the diameter is increased. Magnetic data are interpreted considering the change of crystalline structure as well as the influence of geometry. The micromagnetic simulations explain the measured magnetic properties by the role of magnetocrystalline anisotropy and the combined influence of the shape anisotropy and the interactions. They also show the change in the reversal mode with the increased diameter from vortex propagation to curling when the field is applied parallel to the nanopillar axis, and from coherent rotation to curling when it is applied perpendicular. © 2013 IOP Publishing Ltd., The authors acknowledge the financial support from the Spanish Ministry of Economy and Competitivity under projects FIS2010-20979-C02-02 and MAT2010-20798-C05-01, and fellowship SB2010-0123, provided to YuPI, as well as the NANOBIOMAGNET grant from the Madrid Government. This work was also supported by the European Community’s Seventh Framework Programme under the project REFREEPERMAG, grant agreement 280670. MPP is thankful to FCT for grant SFRH/BD/43440/2008., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic reversal modes in cylindrical nanowires

  • Ivanov, Yu P.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
We perform a systematic study based on micromagnetic simulations of the demagnetization process for cylindrical nanowires with different crystalline structure. These simulations correspond to the most commonly reported electrodeposited nanowires, based on permalloy, nickel, iron and cobalt, with crystal structure tailored by electrodeposition parameters. The dependence of coercivity and remanence on the nanowire diameter, the angular dependence of coercivity and the corresponding reversal modes are calculated and discussed. Extensive comparison of the obtained coercive field value with available experimental data is presented. Depending on the crystallographic structure, the nanowires reverse magnetization by transverse or vortex domain walls and can exhibit the vortex structure along the whole nanowire length. The state diagrams for reversal modes in different materials as a function of the exchange correlation length, nanowire diameter and the anisotropy direction are presented. Magnetic force microscopy images corresponding to different structures are also evaluated by the micromagnetic simulations. © 2013 IOP Publishing Ltd., The authors acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness under projects FIS2010-20979-C02-02 and MAT2010-20798-C05-01, from the Regional Government of Madrid under project S2009/MAT-1726, from the European Community’s Seventh Framework Program under the project REFREEPERMAG, grant agreement 280670, and from the Far Eastern Federal University. Dr Yu P Ivanov wishes to thank the Spanish Ministry of Education for the postdoctoral fellowship during his stay in ICMM/CSIC in Madrid., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning the magnetization reversal process of FeCoCu nanowire arrays by thermal annealing

  • Bran, Cristina
  • Ivanov, Yu P.
  • García, J.
  • Pérez del Real, Rafael
  • Prida, V. M.
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
Arrays of hexagonally ordered Fe28Co67Cu5 nanowires with tailored diameter from 18 to 27 nm were prepared by electroplating into anodic alumina templates and annealed in the temperature range of 300-600°C, preserving but refining their bcc crystal structure. Despite the partial reduction of saturation magnetization and corresponding shape anisotropy after annealing at 500°C, larger coercivity, 0.36 T, and squareness ratio, Mr/Ms = 0.98, were obtained. This unexpected behavior is interpreted through micromagnetic simulations where the magnetic hardening is associated with the transition from vortex to transverse domain-wall reversal modes connected with the reduction of saturation magnetization. Simulations also predict a significant coercivity increase with decreasing nanowires diameter which agrees with experimental data in the overlapping diameter range. © 2013 AIP Publishing LLC., This work was supported by the European Community's 7th Framework Program under Project No. REFREEPERMAG, Grant Agreement No. 280670, by the Spanish Ministerio de Economia y Competitividad under Project Nos. MAT2010-0278-C05-01 and 04, and FIS2010-20979-C02-02, and by the Regional Government of Madrid, under Project No. S2009MAT-1726. J. García thanks FICyT for the Severo Ochoa grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CoFeCu electroplated nanowire arrays: Role of composition and annealing on structure and magnetic properties

  • Bran, Cristina
  • Palmero, Ester M.
  • Pérez del Real, Rafael
  • Vázquez Villalabeitia, Manuel
CoxFe100-x and CoxFe95-xCu 5, with 30 < x < 90, arrays of nanowire, around 20 nm in diameter and about 5 μm long, have been prepared by electrodeposition filling the self-assembled nanopores of anodic alumina templates. These samples were later thermally annealed for 2 h in the range of temperatures up to 600 °C. Crystalline anisotropy was confirmed to exhibit bcc cubic structure with [110] texture in as-prepared state. First structural changes are observed after annealing at 450 °C when a refinement of such cubic phase is observed. Annealing at higher temperatures promotes the appearance of Co and Fe oxides. Small addition of Cu to CoFe alloys induces only limited variations in the magnetic properties for as-prepared samples. Nevertheless, the presence of small Cu content promotes a significant magnetic hardening in comparison with the effect observed in CoFe nanowires. From the temperature dependence of magnetic properties in as-prepared and annealed samples we conclude a complex contribution of various anisotropy energy terms coming from the annealing and from the presence of Cu. The presence of Cu in small amount induces significant changes in the magnetic properties of annealed CoFeCu nanowires. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., This study has been supported by the Spanish Ministerio de Economia y Competitividad under Project MAT2010-0278-C05-01, and the European Community’s 7th Framework Program, under Project REFREEPERMAG, Grant Agreement No. 280670., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural and magnetic characterization of as-prepared and annealed FeCoCu nanowire arrays in ordered anodic aluminum oxide templates

  • Rodríguez-González, B.
  • Bran, Cristina
  • Warnatz, T.
  • Rivas, J.
  • Vázquez Villalabeitia, Manuel
Herein, we report on the preparation, structure, and magnetic characterization of FeCoCu nanowire arrays grown by DC electrodeposition inside self-assembled ordered nanopores of anodic aluminum oxide templates. A systematic study of their structure has been performed both in as-prepared samples and after annealing in the temperature range up to 800 °C, although particular attention has been paid to annealing at 700 °C after which maximum magnetic hardening is achieved. The obtained nanowires have a diameter of 40 nm and their Fe0.28Co0.67Cu0.05 composition was confirmed by energy dispersive X-ray spectroscopy (EDS). Focused ion-beam lamellas of two samples (as-prepared and annealed at 700 °C) were prepared for their imaging in the high-resolution transmission electron microscopy (HRTEM) perpendicularly to the electron beam, where the obtained EDS compositional mappings show a homogeneous distribution of the elements. X-ray diffraction analysis, and selected area electron diffraction (SAED) patterns confirm that nanowires exhibit a bcc cubic structure (space group Im-3m). In addition, bright-dark field images show that the nanowires have a polycrystalline structure that remains essentially the same after annealing, but some modifications were observed: (i) an overall increase and sharpening of recrystallized grains, and (ii) an apparent shrinkage of the nanowires diameter. Obtained SAED patterns also show strong textured components with determined 〈111〉 and 〈112〉 crystalline directions parallel to the wires growth direction. The presence of both directions was also confirmed in the HRTEM images doing Fourier transform analyses. Magnetic measurements show strong magnetic anisotropy with magnetization easy axis parallel to the nanowires in as-prepared and annealed samples. The magnetic properties are tuned by suitable thermal treatments so that, maximum enhanced coercivity (∼2.7 kOe) and normalized remanence (∼0.91 Ms) values are achieved after annealing at temperature of 700 °C. The contribution of the changes in the crystalline structure, induced by the heat treatment, to the magnetic hardening of the FeCoCu nanowires is discussed. © 2014 AIP Publishing LLC., This work was supported by the European Community’s 7th Framework Program under Project REFREEPERMAG, Grant No. 280670, and by the Spanish Ministerio de Economía y Competitividad under Project MAT2010-0278- C05-01., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Structural and magnetic properties of L10 FePt/{MgO, W, or Pt }/L10 FePt trilayers

  • Kaidatzis, Andreas
  • Giannopoulos, Georgios
  • Psycharis, V.
  • García-Martín, José Miguel
  • Varvaro, G.
  • Testa, A. M.
  • Niarchos, Dimitrios
Trabajo presentado en el XXXII Panhellenic Conference on Solid State Physics and Materials Science, celebrado en Ioannina (Grecia), del 18 al 21 de septiembre de 2016, Nowadays there is an urgent need for enhancing data storage capacity of hard disk drives due to the rapid increase of digital data volume produced worldwide. New effective approaches are required to push the recording areal density beyond the limit of 1 Tbit/in2 of state-of-art hard disk drives. A promising alternative is 3D-magnetic recording, where stacking magnetic layers with different magnetic properties are used [1]. In this work we report on the morpho-structural and magnetic properties of FePt/interlayer (MgO, Pt or W) /FePt magnetron sputtered trilayers, as a base structure towards 3D magnetic recording systems. The stack is grown on an MgO (100) substrate and consists of two magnetically hard FePt layers with a thickness of 20 and 10 nm separated by an interlayer of variable thickness (5 up to 50 nm). Fig 1a summarizes the coercivity for all MgO, W or Pt interlayer samples; the layers seem to be coupled even at 20 nm of MgO or W interlayer thickness. However, at 5 nm interlayer thickness, hysteresis loops for W or MgO interlayers are those of a film stack of partially coupled ferromagnetic layers( Figure 1b), whereas a fully decoupled magnetic trilayer is obtained for a Pt interlayer, in agreement to previous reports [2] and also supported by magnetic force microscopy imaging. Finally, electron diffraction patterns and dark field images analysis indicate that most of FePt grains grow in the L10 phase with the (001) planes parallel to the substrate and the MgO interlayer grows oriented as the substrate., Funding from the E.C. is acknowledged (Grant No. 318144 and 280670) & MINECO (MAT2014-59772-C2-1-P), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Toward Rare-Earth-Free Permanent Magnets: A Combinatorial Approach Exploiting the Possibilities of Modeling, Shape Anisotropy in Elongated Nanoparticles, and Combinatorial Thin-Film Approach

  • Niarchos, D.
  • Giannopoulos, G.
  • Gjoka, M.
  • Sarafidis, C.
  • Psycharis, V.
  • Rusz, J.
  • Edström, A.
  • Eriksson, O.
  • Toson, P.
  • Fidler, J.
  • Anagnostopoulou, E.
  • Sanyal, U.
  • Ott, F.
  • Lacroix, L.-M.
  • Viau, G.
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Reichel, L.
  • Schultz, L.
  • Fähler, S.
The objective of the rare-earth free permanent magnets (REFREEPM) project is to develop a new generation of high-performance permanent magnets (PMs) without rare earths. Our approach is based on modeling using a combinatorial approach together with micromagnetic modeling and the realization of the modeled systems (I) by using a novel production of high-aspect-ratio (>5) nanostructrures (nanowires, nanorods, and nanoflakes) by exploiting the magnetic shape anisotropy of the constituents that can be produced via chemical nanosynthesis polyol process or electrodeposition, which can be consolidated with novel processes for a new generation of rare-earth free PMs with energy product in the range of 60 kJ/m3 < (BH)max < 160 kJ/m3 at room temperature, and (II) by using a high-throughput thin-film synthesis and high-throughput characterization approach to identify promising candidate materials that can be stabilized in a tetragonal or hexagonal structure by epitaxial growth on selected substrates, under various conditions of pressure, stoichiometry, and temperature. In this article, we report the progress so far in selected phases., This work is supported by European Commission (REFREEPERMAG project) grant number GA-NMP3-SL-2012-280670.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Angular dependence of coercivity with temperature in Co-based nanowires

  • Bran, Cristina
  • Espejo, A. P.
  • Palmero, Ester M.
  • Escrig, J.
  • Vázquez Villalabeitia, Manuel
The magnetic behavior of arrays of Co and CoFe nanowire arrays has been measured in the temperature range between 100 and 300 K. We have paid particular attention to the angular dependence of magnetic properties on the applied magnetic field orientation. The experimental angular dependence of coercivity has been modeled according to micromagnetic analytical calculations, and we found that the propagation of a transversal domain wall mode gives the best fitting with experimental observations. That reversal mode holds in the whole measuring temperature range, for nanowires with different diameters and crystalline structure. Moreover, the quantitative strength of the magnetocrystalline anisotropy and its magnetization easy axis are determined to depend on the crystalline structure and nanowires diameter. The evolution of the magnetocrystalline anisotropy with temperature for nanowires with different composition gives rise to an opposite evolution of coercivity with increasing temperature: it decreases for CoFe while it increases for Co nanowire arrays., This work has been performed under the auspices of the EU Commission under REFREEPERMAG Project, Grant Agreement No. 280670 and of Regional Government of Madrid under Project Nanobiomagnet, S2009/MAT-1726. A.P. E. and J.E. acknowledge the support from Fondecyt 1150952 and Center for the Development of Nanoscience and Nanotechnology CEDENNA FB0807. Conicyt Ph.D. Fellowships Program is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Correlation between structure and magnetic properties in CoxFe100-x nanowires: The roles of composition and wire diameter

  • Bran, Cristina
  • Palmero, Ester M.
  • Li, Zi-An
  • Pérez del Real, Rafael
  • Spasova, M.
  • Farle, M.
  • Vázquez Villalabeitia, Manuel
The structural and magnetic characteristics of CoxFe100-x (0 ≤ x ≤ 100) cylindrical nanowire arrays are investigated for two series of nanowires with diameters of 20 and 40 nm, respectively. The crystalline structure evolves with Co content from bcc Fe through a mixed bcc-fcc phase to a final polycrystalline fcc or hcp phase for 40 and 20 nm diameter Co nanowires, respectively. A monocrystalline structure is found only in a few nanowires with a 40 nm diameter. The magnetic characterization under axial magnetic field reveals an increase in coercivity and remanence for increasing Co content as the crystalline structure evolves from bcc Fe to fcc Co. These parameters decrease when hcp Co with a stronger magnetocrystalline anisotropy and nearly perpendicular 'c' axis is formed. Overall higher values are observed in nanowires when the nanowire diameter decreases from 40 to 20 nm. An increase of the total magnetic anisotropy energy density is found with decreasing temperature, especially for Co wires where the strong magnetocrystalline anisotropy plays the most significant role., This work has been performed under the auspices of the EU Commission under REFREEPERMAG Project, Grant Agreement No. 280670. Complementary support of the 'Ministerio de Economia y Competitividad' from Spain under MAT2010-02798-C05-01 project, and that of the 'Comunidad de Madrid' under NANOFRONTMAG-CM project (S2013/MIT-2850) is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Magnetic hardening of Fe30Co70nanowires

  • Liébana Viñas, Sara
  • Salikhov, Ruslan
  • Bran, Cristina
  • Palmero, Ester M.
  • Vázquez Villalabeitia, Manuel
  • Arvan, Behnaz
  • Yao, Xiang
  • Toson, Peter
  • Fidler, Josef
  • Spasova, Marina
  • Wiedwald, Ulf
  • Farle, Michael
3d transition metal-based magnetic nanowires (NWs) are currently considered as potential candidates for alternative rare-earth-free alloys as novel permanent magnets. Here, we report on the magnetic hardening of FeConanowires in anodic aluminium oxide templates with diameters of 20 nm and 40 nm (length 6 μm and 7.5 μm, respectively) by means of magnetic pinning at the tips of the NWs. We observe that a 3-4 nm naturally formed ferrimagnetic FeCo oxide layer covering the tip of the FeCo NW increases the coercive field by 20%, indicating that domain wall nucleation starts at the tip of the magnetic NW. Ferromagnetic resonance (FMR) measurements were used to quantify the magnetic uniaxial anisotropy energy of the samples. Micromagnetic simulations support our experimental findings, showing that the increase of the coercive field can be achieved by controlling domain wall nucleation using magnetic materials with antiferromagnetic exchange coupling, i.e. antiferromagnets or ferrimagnets, as a capping layer at the nanowire tips., We acknowledge funding from the European Community's Seventh Framework Programme (FP7-NMP) under grant agreement no. 280670 (REFREEPERMAG).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Domain wall pinning in FeCoCu bamboo-like nanowires

  • Berganza, Eider
  • Bran, Cristina
  • Jaafar, Miriam
  • Vázquez Villalabeitia, Manuel
  • Asenjo Barahona, Agustina
The three dimensional nature of cylindrical magnetic nanowires has opened a new way to control the domain configuration as well as the magnetization reversal process. The pinning effect of the periodic diameter modulations on the domain wall propagation in FeCoCu individual nanowires is determined by Magnetic Force Microscopy, MFM. A main bistable magnetic configuration is firstly concluded from MFM images characterized by the spin reversal between two nearly single domain states with opposite axial magnetization. Complementary micromagnetic simulations confirm a vortex mediated magnetization reversal process. A non-standard variable field MFM imaging procedure allows us to observe metastable magnetic states where the propagating domain wall is pinned at certain positions with enlarged diameter. Moreover, it is demonstrated that it is possible to control the position of the pinned domain walls by an external magnetic field., We acknowledge the support from the Spanish Ministerio de Economia y Competitividad under project no. MAT2013-48054-C2-1-R, Consolider CSD2010-00024 and from the European Community’s 7th Framework Program, project REFREEPERMAG, grant agreement no 280670.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Spin configuration in isolated FeCoCu nanowires modulated in diameter

  • Iglesias-Freire, Ó.
  • Bran, C.
  • Berganza, E.
  • Mínguez-Bacho, I.
  • Magén, C.
  • Vázquez, M.
  • Asenjo, A.
Cylindrical Fe28Co67Cu5 nanowires modulated in diameter between 22 and 35 nm are synthesized by electroplating into the nanopores of alumina membranes. High-sensitivity MFM imaging (with a detection noise of 1 µN m-1) reveals the presence of single-domain structures in remanence with strong contrast at the ends of the nanowires, as well as at the transition regions where the diameter is modulated. Micromagnetic simulations suggest that curling of the magnetization takes place at these transition sites, extending over 10–20 nm and giving rise to stray fields measurable with our MFM. An additional weaker contrast is imaged, which is interpreted to arise from inhomogeneities in the nanowire diameter.