Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CO2 Capture and Utilization Editorial

  • Fernández García, José Ramón
  • García López, Susana
  • Eloy S. Sanz-Pérez
S.G. would like to thank funding from the PrISMa and ALIGN-CCUS projects. The PrISMa Project (No 299659) is funded through the ACT programme (Accelerating CCS Technologies, Horizon 2020 Project No 294766). Financial contributions made from BEIS together with extra funding from NERC and EPSRC, UK; RCN, Norway; SFOE, Switzerland; and US-DOE, USA, are gratefully acknowledged. The ACT ALIGN-CCUS project (No 271501) has received funding from RVO (NL), FZJ/PtJ (DE), Gassnova (NO), UEFISCDI (RO), BEIS (UK) and is co-funded by the European Commission under the Horizon 2020 programme ACT, Grant Agreement No 691712; www.alignccus.eu. E.S.P. thanks funding from the Young Researchers R&D Project Ref.2177 financed by the Community of Madrid and the Rey Juan Carlos University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Detection and quantification of CO2 seepage in seawater using the stoichiometric Cseep method: Results from a recent subsea CO2 release experiment in the North Sea

  • Omar, Abdirahman M.
  • García-Ibáñez, Maribel I.
  • Schaap, Allison
  • Oleynik, Anna
  • Esposito, Mario
  • Jeansson, Emil
  • Loucaides, Socratis
  • Thomas, Helmuth
  • Alendal, Guttorm
Carbon Capture and Storage (CCS) is a potential significant mitigation strategy to combat climate change and ocean acidification. The technology is well understood but its current implementation must be scaled up nearly by a hundredfold to become an effective tool that helps meet mitigation targets. Regulations require monitoring and verification at storage sites, and reliable monitoring strategies for detection and quantification of seepage of the stored carbon need to be developed. The Cseep method was developed for reliable determination of CO2 seepage signal in seawater by estimating and filtering out natural variations in dissolved inorganic carbon (C). In this work, we analysed data from the first-ever subsea CO2 release experiment performed in the north-western North Sea by the EU STEMM−CCS project. We successfully demonstrated the ability of the Cseep method to (i) predict natural C variations around the Goldeneye site over seasonal to interannual time scales; (ii) establish a process-based baseline C concentration with minimal variability; (iii) determine CO2 seepage detection threshold (DT) to reliably differentiate released−CO2 signal from natural variability and quantify released−CO2 dissolved in the sampled seawater. DT values were around 20 % of the natural C variations indicating high sensitivity of the method. Moreover, with the availability of DT value, the identification of released−CO2 required no pre-knowledge of seepage occurrence, but we used additional available information to assess the confidence of the results. Overall, the Cseep method features high sensitivity, automation suitability, and represents a powerful future monitoring tool both for large and confined marine areas., This work has received funding from the European Union’s Horizon 2020 research and innovation programme (contract No. 654462, STEMM-CCS), the ACT programme (Accelerating CCS Technologies, Horizon2020 project No 294766, the ACTOM project), and the Research Council of Norway (Project No. 254711, BayMoDe). H. Thomas acknowledges support by the German Academic Exchange Service (DAAD, #57429828) from funds of the German Federal Ministry of Education and Research (BMBF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Optimal sensors placement for detecting CO2 discharges from unknown locations on the seafloor

  • Oleynik, Anna
  • García-Ibáñez, Maribel I.
  • Blaser, Nello
  • Omar, Abdirahman
  • Alendal, Guttorm
Assurance monitoring of the marine environment is a required and intrinsic part of CO2 storage project. To reduce the costs related to the monitoring effort, the monitoring program must be designed with optimal use of instrumentation. Here we use solution of a classical set cover problem to design placement of an array of fixed chemical sensors with the purpose of detecting a seep of CO2 through the seafloor from an unknown location. The solution of the problem is not unique and different aspects, such as cost or existing infrastructure, can be added to define an optimal solution. We formulate an optimization problem and propose a method to generate footprints of potential seeps using an advection–diffusion model and a stoichiometric method for detection of small seepage CO2 signals. We provide some numerical experiments to illustrate the concepts., This work has received funding from the Research Council of Norway, through the CLIMIT program (project 254711, BayMode) and the European Union Horizon 2020 research and innovation program under grant agreement 654462, STEMM-CCS, and the ACT programme (Accelerating CCS Technologies Project No 294766). Nello Blaser was supported by the Research Council of Norway through grant 248840, dCod 1.0., Peer reviewed