Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publication Artículo científico (JournalArticle)

Tailoring Staircase-like Hysteresis Loops in Electrodeposited Tri-segmented Magnetic Nanowires: a Strategy toward Minimization of Interwire Interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià
  • Valle, Núria del
  • Navau Ros, Carles
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Pané, Salvador
  • Nelson, Bradley J.
  • Sanchez, Alvaro
  • Nogués, Josep
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochemically synthesized amorphous and crystalline nanowires: dissimilar nanomechanical behavior in comparison with homologous flat films

  • Zeeshan M. A.
  • Guerrero, Miguel
  • Nogués, Josep
  • Suriñach, Santiago
  • Baró, María Dolors
  • Pané, Salvador
  • Pellicer, Eva
  • Sort, Jordi
et al., The effects of constrained sample dimensions on the mechanical behavior of crystalline materials have been extensively investigated. However, there is no clear understanding of these effects in nano-sized amorphous samples. Herein, nanoindentation together with finite element simulations are used to compare the properties of crystalline and glassy CoNi(Re)P electrodeposited nanowires (ϕ ≈ 100 nm) with films (3 μm thick) of analogous composition and structure. The results reveal that amorphous nanowires exhibit a larger hardness, lower Young's modulus and higher plasticity index than glassy films. Conversely, the very large hardness and higher Young's modulus of crystalline nanowires are accompanied by a decrease in plasticity with respect to the homologous crystalline films. Remarkably, proper interpretation of the mechanical properties of the nanowires requires taking the curved geometry of the indented surface and sink-in effects into account. These findings are of high relevance for optimizing the performance of new, mechanically-robust, nanoscale materials for increasingly complex miniaturized devices., Partial financial support from the MAT2011-27380-C02-02 and the 2014 SGR-1015 research projects from the Spanish MINECO and the Generalitat de Catalunya is acknowledged. The authors also acknowledge funding support from the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement 296679 (MANAQA). E.P. acknowledges the Spanish Ministerio de Economía y Competitividad (MINECO) for the ‘Ramon y Cajal’ contract (RYC-2012-10839). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Modeling the collective magnetic behavior of highly-packed arrays of multi-segmented nanowires

  • Agramunt-Puig, S.
  • Pellicer, Eva
  • Nogués, Josep
  • Sánchez, Álvaro
  • Sort, Jordi
et al., A powerful model to evaluate the collective magnetic response of large arrays of segmented nanowires comprising two magnetic segments of dissimilar coercivity separated by a non-magnetic spacer is introduced. The model captures the essential aspects of the underlying physics in these systems while being at the same time computationally tractable for relatively large arrays. The minimum lateral and vertical distances rendering densely packed weakly-interacting nanowires and segments are calculated for optimizing their performance in applications like magnetic sensors or recording media. The obtained results are appealing for the design of multifunctional miniaturized devices actuated by external magnetic fields, whose successful implementation relies on achieving a delicate balance between two opposing technological demands: the need for an ultra-high density of nanowires per unit area and the minimization of inter-wire and inter-segment dipolar interactions., We acknowledge the support from the 2014-SGR-1015 and 2014-SGR-150 projects of the Generalitat de Catalunya, the MAT2012-35370 and MAT2014-57960-C3-1-R projects from the Spanish Ministerio de Economía y Competitividad (MINECO)-the latter cofinanced by the ‘Fondo Europeo de Desarrollo Regional’ (FEDER)-, the SPIN-PORICS 2014-Consolidator Grant (Grant Agreement 648454) from the European Research Council (ERC), and the MANAQA project (grant agreement 296679) from the European Community’s Seventh Framework Programme (FET-Open/FP7/2007-2013). AS acknowledges funding from an ICREA Academia award. EP acknowledges the Spanish Ministerio de Economía y Competitividad (MINECO) for the ‘Ramon y Cajal’ contract (RYC-2012-10839). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires: a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt-Puig, S.
  • Baró, María Dolors
  • Estradé, Sònia
  • Peiró, Francesca
  • Pané, Salvador
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance., This work has been partially funded by the 2014-SGR-1015, 2014-SGR-150, and 2014-PROD-00059 projects from the Generalitat de Catalunya, the MAT2014-57960-C3-1-R (cofunded by FEDER), MAT2012-35370, MAT2013-41506 and CSD2009-00013 projects from the Spanish Ministerio de Economia y Competitividad (MINECO), and the MANAQA FET-Open Project from the European Commission (FP7) under Grant Agreement 296679 and the ERC CoG 648454 SPIN-PORICS. J.Z. is grateful to the China Scholarship Council (CSC) for a Ph.D. grant. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC-2012-10839). A.S. acknowledges a grant from ICREA Academia funded by the Generalitat de Catalunya. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant No. SEV-2013-0295)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunable high-field magnetization in strongly exchange-coupled freestanding Co/CoO core/shell coaxial nanowires

  • Salazar-Álvarez, G.
  • Geshev, Julian
  • Agramunt-Puig, S.
  • Navau, Carles
  • Sánchez, Álvaro
  • Sort, Jordi
  • Nogués, Josep
The exchange bias properties of Co/CoO coaxial core/shell nanowires were investigated with cooling and applied fields perpendicular to the wire axis. This configuration leads to unexpected exchange-bias effects. First, the magnetization value at high fields is found to depend on the field-cooling conditions. This effect arises from the competition between the magnetic anisotropy and the Zeeman energies for cooling fields perpendicular to the wire axis. This allows imprinting predefined magnetization states to the antiferromagnetic (AFM) shell, as corroborated by micromagnetic simulations. Second, the system exhibits a high-field magnetic irreversibility, leading to open hysteresis loops attributed to the AFM easy axis reorientation during the reversal (effect similar to athermal training). A distinct way to manipulate the high-field magnetization in exchange-biased systems, beyond the archetypical effects, was thus experimentally and theoretically demonstrated., The work was supported by the 2014-SGR-1015 and 2014-SGR-150 projects of the Generalitat de Catalunya, the Spanish MAT2012-35370 project, European Community’s Seventh Framework Programme (FET-Open/FP7/2007-2013) under grant agreement 296679 (MANAQA), and the Brazilian agency CAPES (BEX 0298/2015-08). G.S.A. thanks the Knut and Alice Wallenberg Foundation (Project 3DEM-NATUR) for the partial financial support. A.S. acknowledges funding from an ICREA Academia award. The authors thank Maria Esther Mata-Zamora and Raul Valenzuela for providing the nanowires. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Tailoring Staircase-like Hysteresis Loops in Electrodeposited Tri-segmented Magnetic Nanowires: a Strategy toward Minimization of Interwire Interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià
  • Valle, Núria del
  • Navau Ros, Carles
  • Baró, M. D.
  • Estradé Albiol, Sònia
  • Peiró Martínez, Francisca
  • Pané, Salvador
  • Nelson, Bradley J.
  • Sanchez, Alvaro
  • Nogués, Josep
  • Pellicer Vilà, Eva M. (Eva Maria)
  • Sort, Jordi
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires

  • Isrhad, M. I.
  • Mohamed, N. M.
  • Abdullah, M. Z.
  • Saheed, M. S. M.
  • Mumtaz, A.
  • Yasar, M.
  • Yar, A.
  • Zeeshan, M. Arif
  • Sort, Jordi|||0000-0003-1213-3639
Cobalt nanowires (NWs) have been synthesized by electrodeposition inside the pores of anodized aluminium oxide templates, at different values of applied deposition potential. The as-deposited NWs are parallel to one another and exhibit a high geometrical aspect ratio. The crystal structure of these NWs shows a strong dependence on the applied deposition potential during synthesis. X-ray diffraction indicates the predominance of hexagonal-closed-packed (HCP) phase with (002) texture at low applied deposition potentials, whereas a reorientation of the c-axis of the HCP structure is observed for high electrodeposition potentials. Moreover, for a given electrodeposition time, the length of the NWs also increases with the applied potential. As a result of these structural changes, a switch in the magnetic easy axis, from parallel to perpendicular to the NWs axis, occurs depending on the applied potential. A simplified model is used to account for this reorientation of the effective magnetic anisotropy direction, which takes into account the interplay between shape anisotropy, magnetocrystalline anisotropy and interwire dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochemically synthesized amorphous and crystalline nanowires: dissimilar nanomechanical behavior in comparison with homologous flat films

  • Zeeshan, M. Arif
  • Esqué-de los Ojos, Daniel|||0000-0002-6279-2037
  • Castro-Hartmann, Pablo|||0000-0002-8991-9560
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Nogués, Josep|||0000-0003-4616-1371
  • Suriñach, Santiago|||0000-0001-8125-0594
  • Baró, M. D.|||0000-0002-8636-1063
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
The effects of constrained sample dimensions on the mechanical behavior of crystalline materials have been extensively investigated. However, there is no clear understanding of these effects in nano-sized amorphous samples. Herein, nanoindentation together with finite element simulations are used to compare the properties of crystalline and glassy CoNi(Re)P electrodeposited nanowires (ϕ ≈ 100 nm) with films (3 μm thick) of analogous composition and structure. The results reveal that amorphous nanowires exhibit a larger hardness, lower Young's modulus and higher plasticity index than glassy films. Conversely, the very large hardness and higher Young's modulus of crystalline nanowires are accompanied by a decrease in plasticity with respect to the homologous crystalline films. Remarkably, proper interpretation of the mechanical properties of the nanowires requires taking the curved geometry of the indented surface and sink-in effects into account. These findings are of high relevance for optimizing the performance of new, mechanically-robust, nanoscale materials for increasingly complex miniaturized devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Toward uniform electrodeposition of magnetic Co-W mesowires arrays, direct versus pulse current deposition

  • Tsyntsaru, N.
  • Silkin, S.
  • Cesiulis, Henrikas|||0000-0002-5077-7884
  • Guerrero, Miguel|||0000-0001-8350-8261
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Template-assisted electrodeposition of Co-rich Co-W alloys into mesoporous anodized aluminum oxide from ammonia-free solutions is investigated. The optimum deposition conditions rendering uniform filling of the pores, either by direct current (DC) or pulse current (PC) methods, are established. Contrary to the DC deposition on flat surfaces (which is kinetically controlled), the DC electrodeposition in the mesopores of the template is limited by mass transfer. Conversely, under PC mode, the Co-W electrodeposition process is controlled by kinetics at frequencies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Modeling the collective magnetic behavior of highly-packed arrays of multi-segmented nanowires

  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Pellicer, Eva|||0000-0002-8901-0998
  • Zhang, Jin
  • Nogués, Josep|||0000-0003-4616-1371
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
A powerful model to evaluate the collective magnetic response of large arrays of segmented nanowires comprising two magnetic segments of dissimilar coercivity separated by a non-magnetic spacer is introduced. The model captures the essential aspects of the underlying physics in these systems while being at the same time computationally tractable for relatively large arrays. The minimum lateral and vertical distances rendering densely packed weakly-interacting nanowires and segments are calculated for optimizing their performance in applications like magnetic sensors or recording media. The obtained results are appealing for the design of multifunctional miniaturized devices actuated by external magnetic fields, whose successful implementation relies on achieving a delicate balance between two opposing technological demands: the need for an ultra-high density of nanowires per unit area and the minimization of inter-wire and inter-segment dipolar interactions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tailoring staircase-like hysteresis loops in electrodeposited trisegmented magnetic nanowires, a strategy toward minimization of interwire interactions

  • Zhang, Jin
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Baró, M. D.|||0000-0002-8636-1063
  • Estrade, Sonia|||0000-0002-3340-877X
  • Peiro, Francesca|||0000-0002-5697-0554
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
A new strategy to minimize magnetic interactions between nanowires (NWs) dispersed in a fluid is proposed. Such a strategy consists of preparing trisegmented NWs containing two antiparallel ferromagnetic segments with dissimilar coercivity separated by a nonmagnetic spacer. The trisegmented NWs exhibit a staircase-like hysteresis loop with tunable shape that depends on the relative length of the soft- and hard-magnetic segments and the respective values of saturation magnetization. Such NWs are prepared by electrodepositing CoPt/Cu/Ni in a polycarbonate (PC) membrane. The antiparallel alignment is set by applying suitable magnetic fields while the NWs are still embedded in the PC membrane. Analytic calculations are used to demonstrate that the interaction magnetic energy from fully compensated trisegmented NWs with antiparallel alignment is reduced compared to a single-component NW with the same length or the trisegmented NWs with the two ferromagnetic counterparts parallel to each other. The proposed approach is appealing for the use of magnetic NWs in certain biological or catalytic applications where the aggregation of NWs is detrimental for optimized performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunable high-field magnetization in strongly exchange-coupled freestanding Co/CoO core/shell coaxial nanowires

  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Geshev, Julian|||0000-0003-3730-3657
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
  • Nogués, Josep|||0000-0003-4616-1371
The exchange bias properties of Co/CoO coaxial core/shell nanowires have been investigated with cooling and applied fields perpendicular to the wire axis. This configuration leads to unexpected exchange-bias effects. Firstly, the magnetization value at high fields is found to depend on the field-cooling conditions. This effect arises from the competition between the magnetic anisotropy and the Zeeman energies for cooling fields perpendicular to the wire axis. This allows imprinting pre-defined magnetization states to the AFM, as corroborated by micromagnetic simulations. Secondly, the system exhibits a high-field magnetic irreversibility, leading to open hysteresis loops, attributed to the AFM easy-axis reorientation during the reversal (effect similar to athermal training). A distinct way to manipulate the high-field magnetization in exchange-biased systems, beyond the archetypical effects, is thus experimentally and theoretically demonstrated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Toward robust segmented nanowires, understanding the impact of crystallographic texture on the quality of segment interfaces in magnetic metallic nanowires

  • Zhang, Jin
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Sort, Jordi|||0000-0003-1213-3639
  • Pellicer, Eva|||0000-0002-8901-0998
Segmented nanowires (NWs) have found a wealth of applications due to their multifuctionality, arising from complementarities and synergies among segments of different materials. However, to ensure a practical use of segmented NWs, high quality interfaces between dissimilar segments must be ensured. Herein, tri-segmented CoPt/Cu/Ni NWs and bi-segmented CoPt/Ni magnetic NWs are fabricated by means of template-assisted electrodeposition and the characteristics of their interfaces are investigated in detail. The presence of a Cu segment sandwiched between the CoPt and the Ni segments severely affects the integrity of the whole NW. Namely, Cu deposits in a (200) textured face-centered cubic (fcc) structure, which cannot accommodate well on the c-axis oriented hexagonal close-packed CoPt. Instead, when the Cu segment is absent, well-connected CoPt/Ni NWs with smooth interface are obtained. Unlike the Cu segment, Ni shows the (111) textured fcc structure, which holds good crystallographic matching with the underlying CoPt segment. Magnetic measurements reveal that CoPt/Ni NWs exhibit staircase-like hysteresis loops similar to the tri-segmented CoPt/Cu/Ni NWs. Such loop shape stems from the dissimilar coercivity between the hard (CoPt) and soft (Ni) segments. The bi-segmented NWs (with robust interfaces) are appealing for multi-bit recording media, magnetic nanoelectromechanical systems and magnetically-driven wireless drug delivery nanoplatforms.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Dually actuated atomic force microscope with miniaturized magnetic bead-actuators for single-molecule force measurements

  • Sevim, Semih
  • Ozer, Sevil
  • Feng, Luying
  • Wurzel, Joel
  • Fakhraee, Arielle
  • Shamsudhin, Naveen
  • Jang, Bumjin
  • Alcantara, Carlos
  • Ergeneman, Olgaç
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Lühmann, Tessa
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Torun, Hamdi
We report for the first time on a novel Atomic Force Microscopy (AFM) technique with dual actuation capabilities using both piezo and magnetic bead actuation for advanced single-molecule force spectroscopy experiments. The experiments are performed by manipulating functionalized magnetic microbeads using an electromagnet against a stationary AFM cantilever. Magnetic actuation has been demonstrated for AFM before to actuate cantilevers, but here we report for the first time a method where we keep the cantilever stationary and accomplish actuation via free-manipulated microstructures. This method leads to a significant reduction of mechanical drift in the system since the experiments are performed without a need for a hard surface and the measured force between the cantilever and the bead is inherently differential. In addition, shrinking the size of the actuator can minimize hydrodynamic forces affecting the AFM cantilever. We conducted single-molecule force spectroscopy and force-clamp experiments with biotin/streptavidin as a model system using the new method. The new method reported herein allows applying constant force on the beads to perform force-clamp experiments without any active feedback, which might be crucial for a deeper understanding of interaction between biomolecules.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetometry of individual polycrystalline ferromagnetic nanowires

  • Shamsudhin, Naveen
  • Tao, Ye|||0000-0002-3963-6079
  • Sort, Jordi|||0000-0003-1213-3639
  • Jang, Bumjin
  • Degen, Christian L.
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
Ferromagnetic nanowires are finding use as untethered sensors and actuators for probing micro- and nanoscale biophysical phenomena, such as for localized sensing and application of forces and torques on biological samples, for tissue heating through magnetic hyperthermia, and for micro-rheology. Quantifying the magnetic properties of individual isolated nanowires is crucial for such applications. We use dynamic cantilever magnetometry to measure the magnetic properties of individual sub-500nm diameter polycrystalline nanowires of Ni and Ni80Co20 fabricated by template-assisted electrochemical deposition. The values are compared with bulk, ensemble measurements when the nanowires are still embedded within their growth matrix. We find that single-particle and ensemble measurements of nanowires yield significantly different results that reflect inter-nanowire interactions and chemical modifications of the sample during the release process from the growth matrix. The results highlight the importance of performing single-particle characterization for objects that will be used as individual magnetic nanoactuators or nanosensors in biomedical applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nanomechanics on FGF-2 and heparin reveal slip bond characteristics with pH dependency

  • Sevim, Semih
  • Ozer, Sevil
  • Jones, Gabriel
  • Wurzel, Joel
  • Feng, Luying
  • Fakhraee, Arielle
  • Shamsudhin, Naveen
  • Ergeneman, Olgaç
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
  • Pané i Vidal, Salvador|||0000-0003-0147-8287
  • Nelson, Bradley J.|||0000-0001-9070-6987
  • Torun, Hamdi
  • Lühmann, Tessa
Fibroblast growth factor 2 (FGF-2), an important paracrine growth factor, binds electrostatically with low micromolar affinity to heparan sulfates present on extracellular matrix proteins. A single molecular analysis served as a basis to decipher the nanomechanical mechanism of the interaction between FGF-2 and the heparan sulfate surrogate, heparin, with a modular atomic force microscope (AFM) design combining magnetic actuators with force measurements at the low force regime (1 × 10¹ to 1 × 10⁴ pN/s). Unbinding events between FGF-2-heparin complexes were specific and short-lived. Binding between FGF-2 and heparin had strong slip bond characteristics as demonstrated by a decrease of lifetime with tensile force on the complex. Unbinding forces between FGF-2 and heparin were further detailed at different pH as relevant for (patho-) physiological conditions. An acidic pH environment (5.5) modulated FGF-2-heparin binding as demonstrated by enhanced rupture forces needed to release FGF-2 from the heparin-FGF-2 complex as compared to physiological conditions. This study provides a mechanistic and hypothesis driven model on how molecular forces may impact FGF-2 release and storage during tissue remodeling and repair.