Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a Twisting based algorithm

  • Dòria-Cerezo, Arnau
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Trabajo presentado a la 39th IECON celebrada en Viena del 10 al 13 de noviembre de 2013., This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., This work was supported by the Spanish Government Research Project DPI2010-15110, Project Marie Curie FP7-2011-IIF-299767/911767 ACRES (EU), CONICET and UNLP (Argentina). The research of C. Kunusch has been supported by the Seventh Framework Programme of the European Community through the Marie Curie actions (GA: PCIG09-GA-2011-293876), the Puma-Mind project (GA: FCH-JU-2011-1-303419), the CICYT project DPI2011-25649 (MINECO-Spain) and the CSIC JAE-DOC Research Programme., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila
  • Puleston, Pablo Federico
  • Riera, Jordi
Paper presented at the “Fundamentals & Developments of Fuel Cells Conference 2013 (FDFC2013)”, April 16–18, 2013, Karlsruhe, Germany., The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., This work is partially funded by the national project MICINN DPI2011-25649, as well as by the 7th Framework Programme of the European Commission in the context of the Fuel Cells and Hydrogen Joint Undertaking (FCH JU) through the project PUMA-MIND FP7 303419. The work of P. Puleston was supported by CONICET and UNLP (Argentina), as well as Marie Curie FP7-2011-IIF, ACRES (299767/911767) (EU). Finally, the authors highly appreciate the support of the LEICI and the UNLP in enabling a research stay of S. Strahl at the laboratory in La Plata., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Dynamic modeling of a thermal system for a high-temperature PEM fuel cell

  • Roda, Vicente
  • Puleston, Pablo Federico
  • Barreras Toledo, Félix
  • Moré, Jerónimo J.
High-temperature PEM fuel cells (HT-PEMFCs) operation differs from that of conventional ones, because the working temperature has to be controlled between 120°C and 180°C. The proton conducting membrane that functions as electrolyte is made of a PBI polymer doped with phosphoric acid and is highly hygroscopic. On the one hand, if its working temperature decreases below 120°C it absorbs water and the acid is pushed out, reducing the overall proton conductivity. On the other, if t he device is forced to work at temperatures above 180°C, the evaporation of phosphoric acid is accelerated, and the stack lifetime can be dramatically shortened. Therefore, the control system must incorporate specific operational strategies, different to the ones used in low-temperature PEMFCs. In such framework, the objective of this research is to provide a dynamic model of the thermal subsystem of a HT-PEMFC, aiming to develop a proficient temperature controller for a small stack manufactured at LIFTEC. As a first stage, the set of full-order differential equation is obtained assuming concentrate parameters and following a heat flow balance approach. Next, resorting to physical consideration, it is worked into a reduced-order state-space model, suitable for control design pur- poses. Moreover, taking advantage of electrical analogies, a modular equivalent circuit is proposed for the thermal model of each cell. Lumping such modules allows to straightforwardly obtain, not only the whole dynamic model of the stack under consideration, but also of a large stack that will be tackled in a future stage of this project. In particular, the thermal dynamic model presented in this work corresponds to a device comprising five MEAs Celtec® -P1100W manufactured by BASF Fuel Cells, with an active area of 605cm2. The bipolar plates are machined in aluminum, and coated with a thin ceramic layer of CrN of 2.5μm thick to prevent corrosion, but preserving a high electric conductivity. As independent thermal actuators, the stack incorporates flexible electrical resistance wires surrounding each MEA in every ndividual cell. It is also equipped with electrical resistance cartridges placed in the main gas collectors. Thus, by increasing the temperature of the reactant gases, they are able to transfer heat to the bipolar plates and the MEAs, providing a more uni- form and rapid heating of the whole stack. In addition, the fuel cell has been thermally insulated, in order to reduce the heating power demand and to benefit of the heat generated by the stack. In this way, at certain operation conditions, the reaction thermal energy could be large enough to keep the temperature within the range recommended by the MEAs’ manufacturer. However, when the stack operates at high current densities, the excess heat must be extracted, in order to maintain the temperature of the stack in the working range. To this end, the insulation device has a ventilation system equipped with axial fans. Note that the heat extracted can be utilize in heating systems if the HT-PEMFC stack is used as a combined heat and power unit (CHP)., This research has been partially funded by the Spanish Ministry of Science and Innovation under project ENE2009-14750-C05-02/CON, the Spanish Ministry of Economy and Competitiveness under project ENE2012-38642-C02-01, Marie Curie FP7-PIIF-299767, CONICET and UNLP (Argentina)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Puleston, Pablo Federico
  • Kunusch, Cristian
Presentado a la XV Reunión de Trabajo en Procesamiento de la Informnación y Control celebrada en Argentina del 16 al 20 de septiembre de 2013., En este trabajo se presenta el diseño de un controlador para maximizar la eficiencia de una pila de combustible, en base a un algoritmo Super-twisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Este trabajo fue realizado con el apoyo de la UNLP, CONICET, y SECyT, de Argentina; y del FP7-PEOPLE-2011 Marie-Curie Action, Proyectos IIF-ACRES (299767/911767) y (GA: PCIG09-GA-2011-293876), de la Unión Europea, los proyectos Puma-Mind (GA: FCH-JU-2011-1-303419) y CICYT DPI2011-25649 (MINECO-España) y el programa JAE-DOC del CSIC., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme.
UPCommons. Portal del coneixement obert de la UPC
Publication Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Performance improvement by temperature control of an open-cathode PEM fuel cell system

  • Strahl, Stephan
  • Husar, Attila Peter
  • Puleston, Paul Federico
  • Riera, Jordi (Riera Colomer)
The work presented in this article combines experimental analysis and theoretical studies of temperature effects on the performance of an open-cathode, self-humidified PEM fuel cell system for the design of optimal control strategies. The experimental analysis shows the great potential of improving the system performance by proper thermal management. The most significant temperature dependent parameter of the system under study is the exchange current density. On the one hand it is influenced positively by a temperature increase as this lowers the activation barrier. On the other hand a higher temperature causes a reduction of the electrochemical active sites in the cathode catalyst layer due to lower water content in the ionomer and primary pores. Dynamic models for fuel cell temperature, liquid water transport and the related electrochemistry have been developed and validated against the experiment. A cascaded Extremum Seeking control algorithm with a local PI controller is proposed to regulate the temperature to a fuel cell voltage maximum. However, the slow dynamics of the temperature related catalyst-drying effect on performance complicate the optimal thermal management with model-free control strategies., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Estudio de la viabilidad del algoritmo super-twisting de ganancias variables para el control de pilas de combustible PEM

  • Evangelista, Carolina
  • Kunusch, Cristian
  • Puleston, Paul Federico
En este trabajo se presenta el diseño de un controlador paramaximizar la eficiencia de una pila de combustible, en base a un algoritmo Supertwisting (ST) con ganancias variables. La estrategia consiste en regular la relación de oxígeno en exceso, manteniendo la misma en un valor óptimo. El algoritmo empleado posee las ventajas conocidas del ST de ganancias fijas original, tales como robustez frente a incertidumbre y perturbaciones, chattering reducido, y convergencia en tiempo finito. Además, el disponer de ganancias variables permite ampliar el rango de operación, sin modificar demasiado la simplicidad de la ley de control. La forma de variación de las ganancias se determina hallando ciertas funciones cota, proceso que resulta algo trabajoso en un sistema no lineal como éste, pero se realiza en forma off-line por única vez en la etapa de diseño, y permite obtener muy buenos resultados. Los mismos, obtenidos por simulación, se presentan y analizan al final, a fin de evaluar su implementación real., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Control of an active rectifier with an inductive-capacitive-inductive filter using a twisting based algorithm

  • Dòria Cerezo, Arnau
  • Puleston, Paul
  • Kunusch, Cristian
This paper presents a novel controller for an active rectifier with an inductive-capacitive-inductive filter. The proposed control scheme comprises two levels. The internal level, is a current controller based on the second order sliding mode Twisting algorithm, which robustly ensures an unity power factor at the connection point. The slower external level is a PI controller in charge of regulating the output DC voltage to a desired reference. The controller setup also includes a finite-time observer of the current derivative that can be used to avoid direct (and sometimes problematic) numerical differentiation. Finally, simulation results are presented to validate the proposed control scheme., Postprint (published version)